Search

Combined drying, an energy-efficient method that includes osmotic pretreatment in molasses and shortened successive lyophilization, was used to obtain celery root powder and incorporate it in the formulation of cookies, with the aim of obtaining a new product. Wheat flour was substituted with combinedly dehydrated celery root powder at levels from 0 to 30%, and optimization of the amount of wheat flour substitution regarding technological, sensory and nutritive characteristics was performed. The optimal level of 20% substitution was determined using Z-score analysis, from the aspect of the best nutritive improvement and the mildest adverse impact on the technological and sensory quality. In the second research phase, comparison of the cookies with the 20% celery root powder substitution, dehydrated by different methods, indicated that combined dehydration showed upgraded results in terms of the overall quality of the final product, for 28.85 percentile points higher than cookies with lyophilized and for 65.24 percentile points higher than cookies with the addition of convectively dried celery root powder. The cookie containing celery powder previously osmodehydrated in molasses had higher contents of analyzed minerals (1.2–3.3 times), total phenols (10.8%) and antioxidant activities (14% for DPPH and 4% for ABTS) compared to the cookie with lyophilized powder. [ABSTRACT FROM AUTHOR]

By increasing the permeability of the cell membrane of the treated material, pulsed electric fields (PEF) enhance the internal transport of various chemical substances. Changing the distribution of these components can modify the chemical and thermal properties of the given material. This study aimed to analyze the impact of PEF (1 kV/cm; 1 and 4 kJ/kg) applied to strawberries prior to drying by various methods (convective, infrared-convective, microwave-convective, and vacuum) on the chemical and thermal properties of the obtained dried materials (sugars content, total phenolic content, and antioxidant capacity (ABTS and DPPH assays); thermal properties (TGA and DSC); and molecular composition (FTIR)). PEF could have induced and/or enhanced sucrose inversion because, compared to untreated samples, PEF-pretreated samples were characterized by a lower share of sucrose in the total sugar content but a higher share of glucose and fructose. Reduced exposure to oxygen and decreased drying temperature during vacuum drying led to obtaining dried strawberries with the highest content of antioxidant compounds, which are sensitive to these factors. All PEF-pretreated dried strawberries exhibited a lower glass transition temperature (Tg) than the untreated samples, which confirms the increased mobility of the system after the application of an electric field. [ABSTRACT FROM AUTHOR]

Hydrogels are polymeric materials with specific mechanical handling and encapsulation properties. Despite their widespread application, the modelling of the drying behaviour of hydrogels, particularly the evolution of texture stiffness with moisture loss, requires further development. This work aimed to develop numerical models to predict the moisture and deformation of cornstarch–alginate hydrogels under convective drying at 60 °C and 0.5 m/s. Cylindrical solids were used, and a transient three-dimensional FEM model predicted drying profiles via diffusion–convection mass transport. Texture analysis evaluating the hyperelastic coefficients of the hydrogels was performed for moisture contents ranging from 0.91 to 0.55 kg∙kg−1 w.b., yielding Young's modulus values from 24 to 147 kPa. A dimensionless relationship between the moisture ratio and elastic modulus produced a stiffness coefficient, used to adjust the moving boundary velocity and predict volumetric deformation. The model fitting returned an R2 higher than 0.95 and an RMSE lower than 0.04. The FEM model simulated hydrogel shrinkage by assessing the molar flux of water and mesh deformation at the boundaries, with mass diffusivity ranging from 2.38 to 5.46 × 10−10 m2∙s−1. Shrinkage reduced the surface area of solids during drying, revealing a pseudo-constant rate period in the drying profiles. The developed models effectively describe the drying of food materials with high shrinkage ratios. [ABSTRACT FROM AUTHOR]

This study aims to comprehensively investigate the effects of hot-air dehydration on the quality of blue honeysuckle berries (Lonicera caerulea L.). The results demonstrated that drying with hot air at 40–65 °C for 7–72 h resulted in blue honeysuckle berries with a moisture content of 0.21–1.10 g H2O/g dry weight. Generally, low to medium temperatures (40–55 °C) showed a better effect on the quality than high temperatures (60–65 °C). Specifically, drying at 40 °C exclusively resulted in better retention of cuticular wax, the best sensory appearance, and the highest total phenolic content. Drying at 45 °C and 50 °C resulted in the highest antioxidant capacity and the optimal sensory flavor. Drying at 55 °C led to the highest soluble solid/acid ratio, ascorbic acid concentration, total flavonoid, and total anthocyanin. The work introduces an innovative raw berry product and provides a comprehensive practical and theoretical framework for convective dehydration of blue honeysuckle berries. [ABSTRACT FROM AUTHOR]

The present study focused on evaluating the biochemical profiles of four apricot cultivars (cv.) (Prunus armeniaca L.) grown in Latvia and demonstrating their processing to obtain the food product, dried candied fruit (DCF). The fingerprinting of apricot fruit approached by LC-MS and ultraviolet–visible spectroscopy revealed the abundance of bioactives responsible for the antioxidant activity. The outstanding composition of group compounds, i.e., phenolics, flavonoids, and vitamin C, was observed in the cv. 'Dimaija', followed by cv. 'Gundega' and cv. 'Velta'. The lowest values were found in the cv. 'Boriss' and fruit from a market of Greek origin. However, the latter two contained the highest carotenoid levels due to a more pronounced maturity. Amongst the 13 individual phenolics detected, rutin, chlorogenic and neochlorogenic acids, catechin, and epicatechin prevailed. The concentrations observed were the highest in cv. 'Dimaija', followed by cv. 'Velta' and cv. 'Gundega'. Osmotic dehydration and convective drying of apricot fruit variedly influenced the content of bioactives in DCF products. The most substantial decrease due to thermal lability was observed in the vitamin C content in DCF, accounting for a 95.3% loss for all cultivars. The content of total phenolics, flavonoids, and carotenoids in DCF, on average, was 62.7%, 49.6%, and 87.6% lower than that observed in the raw fruit, respectively. On average, the content of individual phenolics in DCF, such as rutin and chlorogenic acid, decreased by 63.8% and 20.8%, respectively. The decline in the content of bioactives was conditioned by the physical migration of the cell components to the hypertonic solution. However, the increase in the content of cell wall-bound phytochemicals, such as catechin and epicatechin, after osmotic dehydration and convective drying, was observed in DCF, corresponding to a 59.5% and 255.64% increase compared with the raw fruit, respectively. Panelists generally responded positively to the developed DCF; however, greater preference was given to products with a lower phenolic content, such as cv. 'Boriss' and those produced from the market fruit. It is believed that the high flavan-3-ols content, along with chlorogenic acid, contributed to the bitter taste of DCF. Overall, apricot fruits represent the abundance of bioactives retained in DCF after osmotic dehydration and convective drying. The findings observed in the current study allow to consider DCF as a functional food; however, given the high sugar content, their consumption should be in moderation. [ABSTRACT FROM AUTHOR]

This study aimed to evaluate the effect of convective and microwave drying on the bioactive-compounds content of blackberry (Rubus fruticosus) fruits, as well as drying parameters and energy consumption. The fruit was dehydrated in a convective dehydrator at a temperature of 50 °C and 70 °C and in a microwave oven at power levels of 90 W, 180 W and 240 W. The highest amount of anthocyanins, polyphenols and antioxidant capacity were obtained in blackberry fruits that were microwave dried at 90 W and 180 W (46.3–52.5 and 51.8–83.5 mg 100 g−1 dm of total anthocyanins, 296.3–255.8 and 418.4–502.2 mg 100 g−1 dm of total phenolics, and 1.20–1.51 and 1.45–2.35 mmol TE 100 g−1 dm of antioxidant capacity for 90 W and 180 W models, respectively). It turned out that microwave dehydration shortened the processing time and lowered the energy consumption compared to convective drying (a significantly reduced drying time of 92–99% with microwave dehydration). Blackberry fruits dehydrated at 240 W showed the shortest dehydration time (59–67 min), minimal energy consumption (0.23 kWh) and the most efficient diffusion (1.48–1.66 × 10−8 m2 s−1). [ABSTRACT FROM AUTHOR]

Tisane is a fruit or herbal infusion, commonly referred to as herbal tea. These products are consumed as part of a balanced diet, which is closely related to the trend of a healthier lifestyle. In this work, tisanes prepared from rosehip (R), and herbal mixtures containing rosehip/hibiscus flowers (R/H) and rosehip/hibiscus flowers/saffron (R/H/S) were studied. Rosehip was dried by the convective drying method at 40, 50 and 60 °C. Total phenolic content (TPC), total flavonoid content (TFC), total flavonol content (TFlC), total anthocyanin content (TAC), antioxidant properties (DPPH∙ and ABTS∙+ assays) and in vitro inhibitory potential toward α-amylase of tisanes were examined. The highest TPC (based on dry weight (dw)) was measured in tisane obtained from rosehip dried at 60 °C (37.84 mg GAE/g dw). Tisanes prepared from a R/H/S mixture had the highest values of TFC (4.66–6.13 mg QUE/g dw), TFlC (2.67–3.98 mg QUE/g dw) and TAC (1.35–2.27 mg Cy 3-glc/g dw). The highest DPPH∙ scavenging activity (53.42 mg TE/g dw) was measured in rosehip (dried at 60 °C) tisane, whereas tisane prepared from a rosehip (dried at 60 °C)/hibiscus mixture expressed the best ABTS∙+ scavenging activity (107.44 mg TE/g dw). All tisane samples expressed high inhibitory potential toward α-amylase, with the highest activity of 85.03% and 89.90%, measured for tisanes prepared from rosehip/hibiscus flowers mixture (rosehip dried at 50 and 60 °C, respectively). [ABSTRACT FROM AUTHOR]

This study examined the convective drying of red cabbage at temperatures ranging from 50 to 90 °C. Mathematical modeling was used to describe isotherms, drying kinetics and rehydration process. The effects of drying conditions on energy consumption and microstructure were also evaluated. The Halsey model had the best fit to the isotherm data and the equilibrium moisture was determined to be 0.0672, 0.0490, 0 0.0379, 0.0324 and 0.0279 g water/g d.m. at 50, 60, 70, 80 and 90 °C, respectively. Drying kinetics were described most accurately by the Midilli and Kuçuk model. Also, the diffusion coefficient values increased with drying temperature. Lower energy consumption was found for drying at 90 °C and the rehydration process was best described by the Weibull model. Samples dehydrated at 90 °C showed high water holding capacity and better maintenance of microstructure. These results could be used to foster a sustainable drying process for red cabbage. [ABSTRACT FROM AUTHOR]

The drying kinetics of porous media are crucial for controlling the drying process, which is a vital component in many processes. A mathematical model of the drying process in a granular bed was developed using Whitaker's model, and its accuracy was verified through experimental results. The results indicated that the three stages of porous media drying are closely linked to the heat flow to the media and the latent heat of evaporation required by the liquid water inside it. Moreover, as the influence of gravity weakens and the capillary force strengthens, specifically due to the gradual decrease in the pore size of the bed, significant differences in the drying kinetics of the bed are observed, particularly in the third stage of drying, which is most affected. The onset of saturation in the third stage of bed drying varies with the pore size of the particles, with smaller pore sizes exhibiting an earlier onset. Additionally, the temperature change in this stage demonstrates the occurrence of secondary warming as the pore size decreases. [ABSTRACT FROM AUTHOR]

This study explores the unexploited potential of Artificial Neural Network (ANN) optimization techniques in enhancing different drying methods and their influence on the characteristics of various sweet potato varieties. Focusing on the intricate interplay between drying methods and the unique characteristics of white, pink, orange, and purple sweet potatoes, the presented experimental study indicates the impact of ANN-driven optimization on food-related characteristics such as color, phenols content, biological activities (antioxidant, antimicrobial, anti-hyperglycemic, and anti-inflammatory), chemical, and mineral contents. The results unveil significant variations in drying method efficacy across different sweet potato types, underscoring the need for tailored optimization strategies. Specifically, purple sweet potatoes emerge as robust carriers of phenolic compounds, showcasing superior antioxidant activities. Furthermore, this study reveals the optimized parameters of dried sweet potato, such as total phenols content of 1677.76 mg/100 g and anti-inflammatory activity of 8.93%, anti-hyperglycemic activity of 24.42%. The upgraded antioxidant capability is presented through DPPH●, ABTS●+, RP, and SoA assays with values of 1500.56, 10,083.37, 3130.81, and 22,753.97 μg TE/100 g, respectively. Additionally, the moisture content in the lyophilized sample reached a minimum of 2.97%, holding favorable chemical and mineral contents. The utilization of ANN optimization proves instrumental in interpreting complex interactions and unlocking efficiencies in sweet potato drying processes, thereby contributing valuable insights to food science and technology. [ABSTRACT FROM AUTHOR]

The present work studies the convective drying of a granular porous medium in a bed of olive pomace. The experimental tests were conducted in a closed convection drying loop of hot air. The experimental tests measured the mass loss over time. Tests were carried out for five temperature values: 60 ± 0.1 °C, 70 ± 0.1 °C, 80 ± 0.1 °C, 90 ± 0.1 °C and 100 ± 0.1 °C, respectively. Moreover, three values of velocities of the drying air, 1 ± 0.01 ms−1, 1.5 ± 0.01 ms−1 and 2 ± 0.01 ms−1, were considered. The effects of initial humidity, bed thickness and pomace composition on the drying process were studied. The results show that the moisture content decreases when the temperature and the velocity of the drying air increase. In addition, the composition of olive pomace (pulp, pits and raw pomace) significantly affects the drying time. A characteristic drying curve and its equation were determined. Seven thin layer drying models were tested, and the Midilli et al.'s model produced the best agreement. The effective moisture diffusivity coefficient (Deff), the activation energy (Ea) and the pre-exponential coefficient of the Arrhenius law were evaluated. The results could be of great help for the pretreatment of crude olive pomace when moving to industrial scale and before passing to the step of biofuel (pellets, briquettes or logs, Syngas) production. [ABSTRACT FROM AUTHOR]

Kaolin clay is one of the essential components of utility and technical ceramic products. Drying is one of the stages of its production and is crucial for the quality of the obtained products. Due to the low energy efficiency of the dryers, it is also one of the most energy-intensive operations performed not only in the production of ceramics but in the industry as a whole. For this reason, modern drying techniques are sought. They are required to be energy efficient, sustainable and produce high-quality products. An example is the so-called hybrid drying, which combines several drying techniques (energy sources) into one process. The aim of this work was to determine the impact of microwave and infrared radiation on the kinetics and energy consumption of convective drying of kaolin clay and the quality of the products. The interaction of convective, microwave and infrared drying was investigated. Drying times, energy consumption and visual quality were compared for the tested processes. The fastest process was convection–microwave drying, where a reduction in drying time of 70% and energy consumption of 50% was observed. Unfortunately, intensive drying had a negative impact on the quality of the products (numerous cracks on the side surface). The best drying methods are those that use all energy sources simultaneously and periodically. Hybrid processes that use all energy sources in a periodic manner had the greatest efficiency. The drying time in these programs was shortened in relation solely to the convection process by 45 to 50% while reducing energy consumption by 3–18%. The product had the best quality. [ABSTRACT FROM AUTHOR]

The study examined the effects of pulsed electric field treatment on the kinetics and properties of convective-dried mushrooms using different drying agents. Increasing the drying air temperature reduced drying time, while the use of dehumidified air resulted in faster water removal. PEF treatment, depending on the parameters, shortened the drying time maximum by 12% or extended the drying time. The physical (dry matter content, rehydration properties, hygroscopic properties, and color) and chemical (polyphenols content and anti-oxidant activity) properties were analyzed. The dry matter contents of the mushrooms were influenced by the drying temperature, while PEF pre-treatment did not influence the rehydration and hygroscopic properties in both cases of drying using air humidity. However, the color parameters were affected by the drying method and energy input, with higher energy input leading to decreased lightness, increased redness, and color saturation. The chemical analyses revealed that the anti-oxidant compounds in the dried mushrooms were influenced by various factors, with PEF treatment and drying non-dehumidified air polyphenol content increasing, whereas dehumidified air caused more phenolic degradation if it was combined with PEF treatment. Anti-oxidant activity varied depending on the drying agent, with non-dehumidified air generally exhibiting better properties. The highest total polyphenol content and best anti-oxidant properties were obtained for the PEF pre-treated with 3 kJ/kg of energy and dried with non-dehumidified air at a temperature of 70 °C. [ABSTRACT FROM AUTHOR]

In order to optimize the convective drying process parameters of peanuts and to provide a theoretical basis for the scientific use of energy in the drying process, this study took single-particle peanuts as the research object and analyzed the heat and mass transfer process during convective drying. In addition, a 3D two-component moisture heat transfer model for peanuts was constructed based on the mass balance and heat balance theorem. Moreover, the changes in the internal temperature and concentration fields of peanut pods during the whole drying process were investigated by simulations using COMSOL Multiphysics. The model was validated by thin-layer drying experiments, compared with the one-component model, and combined with low-field NMR technology to further analyze the internal moisture distribution state of peanut kernel drying process. The results show that both models can effectively simulate the peanut thin-layer drying process, and consistency is found between the experimental and simulated values, with the maximum errors of 10.25%, 9.10%, and 7.60% between the simulated moisture content and the experimental values for the two-component model, peanut shell, and peanut kernel models, respectively. Free water and part of the weakly bound water was the main water lost by peanuts during the drying process, the change in oil content was small, and the bound water content was basically unchanged. The results of the study provide a theoretical basis to accurately predict the moisture content within different components of peanuts and reveal the mechanism of moisture and heat migration during the drying process of peanut pods. [ABSTRACT FROM AUTHOR]

After being harvested, fresh apples and apricots have a high moisture content and are put through a drying process to reduce waste and lengthen shelf life. This study intends to evaluate the physicochemical parameters during moisture removal and product heating in order to conduct an experimental investigation of the convective drying of apples and apricots in a pilot drying installation. The drying agent's temperature and/or speed can be adjusted using the pilot installation. About the raw materials: the apricots (Neptun variety) were dried and cut into halves, while the apples (Golden Delicious variety) were dried and cut into 4 mm thick slices. The fruits' drying properties were observed at 50 °C, 60 °C, 70 °C, and 80 °C, air speeds of 1.0, 1.5, and 2.0 m/s, and relative air humidity levels of 40–45%. Findings of the ascorbic acid content, color, heating, and dimensional fluctuations are provided and examined. Increased air velocity and temperature had the expected effect of increasing water loss, solid gain, and shrinking. Depending on the drying conditions, different color characteristics were applied. [ABSTRACT FROM AUTHOR]

The seasonal nature of fruits and vegetables has an immense impact on the process of seeking methods that allow extending the shelf life in this category of food. It is observed that through continuous technological changes, it is also possible to notice changes in the methods used to examine and study food and its microbiological aspects. It should be added that a new trend of bioactive ingredient consumption is also on the increase, which translates into numerous attempts that are made to keep the high quality of those products for a longer time. New and modern methods are being sought in this area, where the main aim is to support drying processes and quality control during food processing. This review provides deep insight into the application of artificial intelligence (AI) using a multi-layer perceptron network (MLPN) and other machine learning algorithms to evaluate the effective prediction and classification of the obtained vegetables and fruits during convection as well as spray drying. AI in food drying, especially for entrepreneurs and researchers, can be a huge chance to speed up development, lower production costs, effective quality control and higher production efficiency. Current scientific findings confirm that the selection of appropriate parameters, among others, such as color, shape, texture, sound, initial volume, drying time, air temperature, airflow velocity, area difference, moisture content and final thickness, have an influence on the yield as well as the quality of the obtained dried vegetables and fruits. Moreover, scientific discoveries prove that the technology of drying fruits and vegetables supported by artificial intelligence offers an alternative in process optimization and quality control and, even in an indirect way, can prolong the freshness of food rich in various nutrients. In the future, the main challenge will be the application of artificial intelligence in most production lines in real time in order to control the parameters of the process or control the quality of raw materials obtained in the process of drying. [ABSTRACT FROM AUTHOR]

Onions have a high moisture content, which makes them more susceptible to microbial growth. Drying is one of the postharvest preservation methods applied to decrease onion moisture content, thereby increasing its storage life. In this study, onions were peeled, washed, cut into quarters, hot water blanched, and pureed. The puree was further dried using two different drying methods: refractance window drying (RWD) (water temperature: 70 °C) and convective drying (CD) (50 °C). The puree was spread on prefabricated trays at varying thicknesses of 2 mm, 4 mm, and 6 mm. It was observed that, irrespective of the drying method, moisture ratio (MR) decreased and drying time and effective moisture diffusivity increased with respect to the thickness of the puree. In addition, the Lewis model and the Wang and Singh model showed the highest R2 and lowest SEE value for RWD and CD, respectively. Moreover, the MR of onion puree during RWD and CD was predicted using a multi-layer feed-forward (MLF) artificial neural network (ANN) with a back-propagation algorithm. The result showed that the ANN model with 12 and 18 neurons in the hidden layer could predict the MR, with a high R2 value for RWD and CD, respectively. The results also showed that the thickness of the puree and drying method significantly affected the physicochemical quality (color characteristics, pyruvic acid content, total phenolic content, total flavonoid content, antioxidant capacity, and hygroscopicity) of onion powder. It was concluded that RWD proved to be a better drying method than CD in terms of the quality of dried powder and reduced drying time. Irrespective of the drying method, 2 mm-thick puree dried yielded the best-dried onion powder in terms of physicochemical quality, as well yielding the lowest drying time. These samples were further analyzed for calculating the glass transition temperature. [ABSTRACT FROM AUTHOR]

The popularity of edible flowers is increasing day by day and new solutions are sought due to their short shelf life. For this purpose, in this study, four different colors of Viola × wittrockiana Gams.; white (Fino Clear White), orange (Delta Pure Orange), bordeaux/mauve rose (Mammoth Rocky Rose), and yellow (Delta Premium Pure Lemon) flowers were dried at drying air temperature of 60, 70, and 80 °C with a convective hot air dryer. Color (L*, a*, b*, C*, h°, ∆E, and BI), drying time and bioactive compounds (Total Phenolic Content (TPC), anthocyanin content (AC), and antioxidant activity (AO) values were measured). The orange flowers showed the fastest drying (78 min at 80 °C). The lowest total color change (∆E) (4.58 at 70 °C) and browning index (BI) (9.58 at 60 °C) values were observed in all drying processes of white flowers. The highest AC was determined in bordeaux flowers in both fresh (2.4 mg malvidin glucoside/g) and dried (25.57 mg malvidin glucoside/g at 60 °C) samples. The AO decreased in all samples depending on the temperature increase, it was found that the most beneficial result in terms of bioactive compounds was the bordeaux flowers dried at drying air temperature of 60 °C. [ABSTRACT FROM AUTHOR]

The drying industry has grown considerably due to the tremendous demand for non-perishable food. Convective drying is one of the most popular equipment in the drying industry (food, chemical, pharmaceutical, etc.). One of the drawbacks of this equipment, when used for convective drying, is the non-uniformity in the final product quality. This study presents the development of a numerical model through Computational Fluid Dynamics (CFD). The drying chamber of a heat pump dryer is assessed from the perspective of drying air velocity and temperature profiles. The model was developed by solving different transport phenomena-related equations. The established methodology was set up to evaluate how the drying air velocity and temperature distribution affect the drying chamber. These results will define if there is a need to redesign it. The air velocity and temperature profile results show a need to redesign the chamber. Only trays 2, 3, and 4 are the ones that would achieve the drying of the products. The proposed solution is to implement air distributors or modify the tray positioning to make the drying air and temperature distribution homogeneous. [ABSTRACT FROM AUTHOR]

This paper discusses the use of various methods to distinguish between slices of sweet potato dried in different conditions. The drying conditions varied in terms of temperature, the values were: 60 °C, 70 °C, 80 °C, and 90 °C. Examination methods included instrumental texture analysis using a texturometer and digital texture analysis based on macroscopic images. Classification of acquired data involved the use of machine learning techniques using various types of artificial neural networks, such as convolutional neural networks (CNNs) and multi-layer perceptron (MLP). As a result, in the convective drying, changes in color darkening were found in products with the following temperature values: 60 °C (L = 83.41), 70 °C (L = 81.11), 80 °C (L = 79.02), and 90 °C (L = 75.53). The best-generated model achieved an overall classification efficiency of 77%. Sweet potato dried at 90 °C proved to be completely distinguishable from other classes, among which classification efficiency varied between 61–83% depending on the class. This means that image analysis using deep convolutional artificial neural networks is a valuable tool in the context of assessing the quality of convective-dried sweet potato slices. [ABSTRACT FROM AUTHOR]

This work reports the results obtained with an innovative configuration of a closed-static solar greenhouse for sludge drying. The novelty of the solar greenhouse configuration consisted in using a forced ventilation system to provide hot air for sludge drying and the utilization of solar irradiation for energy supply. Wet sewage sludge (97% humidity) was successfully dried up to a residual humidity close to 5% after 25 days during wintertime. The increase of the airflow rate supplied under the sludge bed improved the sludge drying rate. Moreover, the fraction of volatile suspended solids decreased from 70% to 41% after 13 days, indicating that air supply promoted the simultaneous stabilization of the sludge as a side-effect to the drying process. Overall, the specific energy consumption per ton of evaporated water was estimated to approximately 450 kWh/t, resulting in about 55% of energy demand lower than a conventional thermal drying system, while using only free solar energy. The achieved high weight reduction of up to 99% implies a noticeable reduction of the excess sludge handling costs, indicating that solar greenhouse drying is a highly interesting opportunity for sludge drying in medium-small sized WWTPs. [ABSTRACT FROM AUTHOR]

Exotic fruits, which are becoming more and more popular in European countries, contain seeds, which are an unused and useless byproduct of fruit processing. Research conducted in recent years suggests that these unused waste products can be a source of nutrients and bioactive compounds in much more concentrated amounts than those found in the flesh of the fruit. Research on the physicochemical properties and the content of bioactive compounds in fruit seeds may allow the assessment of the possibility and purposefulness of their wider application in the production of functional food. Therefore, the aim of this study was to determine the physicochemical and bioactive properties of exotic, tropical fruit seed powders, such as mango (Mangefiera indica L.) and rambutan (Nephelium lappaceum L.) seeds, obtained by convective drying (CD) and sublimation drying (FD). In the tested powders, the water-holding capacity and water solubility were determined, the color was measured using the 'electronic eye' instrumental method, the taste profile was determined using the 'electronic tongue', and the content of selected bioactive compounds—such as tannins (titration method), total polyphenols and antioxidant activity was also determined using the spectrophotometric method. It was found that the studied powders were characterized by low water-holding capacity (1.2–1.6 g/1 g of powder), low solubility in water (9.5–17.4%), neutral color and varied taste profile, depending on the origin of the tested powder. Rambutan seed powders were characterized by a more bitter taste with a higher umami-flavor intensity compared to mango seed powders, which showed a more intense acidic and sweet taste. The conducted research shows that the applied methods of powder production, i.e., drying (to similar aw values) by convection vs. sublimation, had a much greater impact on changes in the content of bioactive compounds than on the tested physicochemical parameters. The freeze-dried seed powders were characterized by a higher content of polyphenolic compounds and a higher antioxidant activity than convection-dried seed powders. Considering the high content of polyphenols and high antioxidant activity, the studied powders may find applications in the production of dietary supplements and in the design of functional foods. Due to the low water solubility index, mango and rambutan powders can be used in the design of products where particle sensitivity is indicated. The use of the investigated exotic fruit seed powders, i.e., mango and rambutan, may not only be beneficial for nutritional reasons, but also may contribute to the reduction of post-production waste, in line with the recently widespread "zero waste" trend. [ABSTRACT FROM AUTHOR]

A considerable part of food is wasted, causing investment capital loss as well as environmental pollution and health problems in humans. Indirect solar drying was applied to test the potential of drying and reusing this waste as a component of animal feed. The effect of weather changes on drying kinetics and the effective diffusion coefficient, dried feed nutritional composition, and microbiological analysis of the dried product were investigated. A convective laboratory dryer was used as a reference method. Weather conditions have a crucial effect on the use of solar drying; one sunny day with appropriate conditions can reduce the water activity of food waste to below 0.3 and moisture content to below 6%. Much better fitting of experimental and model drying curves was achieved considering sample shrinkage, applying a more complex solution of Fick's second law combined with an optimization procedure. The studied food waste had a good combination of nutrients, such as protein, fat, and carbohydrates; however, the amount of protein in the dried food waste was found to be lower than that in regular feed, and therefore, adding a protein source is recommended. Autoclaving of fresh samples reduced the total microbial counts of dried samples by more than 50%. [ABSTRACT FROM AUTHOR]

The growing market for dried fruits requires more attention to quality parameters. Mango and other tropical fruits are commonly dried at temperatures ranging from 40 °C to 80 °C. Convincing evidence suggests that the nutritional quality of dried fruits is best preserved when dried at low temperatures ≤50 °C, whereas increasing drying temperatures lead to the degradation of the most valuable nutrients inside the fruit. Currently, there is no system or direct measurement method that can assist in identifying the quality deterioration of dried fruits caused by excessive heat exposure during drying. From this perspective, the activity of the heat-sensitive enzyme 'catalase' was used for the first time to evaluate and compare mango slices dried at 40 °C, 60 °C and 80 °C. Various methods, including direct and indirect flotation tests and spectrophotometric measurements, were explored to measure the residual catalase activity in the dried samples. Results showed that the spectrophotometry and indirect flotation test produced the best results, revealing a significant difference (p < 0.05) in the catalase activity of mango slices dried at 40 °C, 60 °C and 80 °C, which the direct-dried mango flotation test failed to predict. Furthermore, this study demonstrates the potential applicability of catalase activity to indicate heat stress in dried mango slices processed at different temperatures. [ABSTRACT FROM AUTHOR]

Featured Application: Microwave drying is implemented in the production of rehydrated food, as demonstrated in the case of stink beans. The potential of microwave drying in the production of rehydrated foods is demonstrated with stink beans (Parkia speciosa), smelly legumes of Africa and Asia. Compared to stink beans dehydrated by convective drying and freeze drying, the microwave products exhibit higher moisture contents, but the distribution of microscopic pores leads to good rehydration characteristics. Dehydration by microwave drying is also achieved within a much shorter period than that commonly used in freeze drying. The dehydration time can be further reduced to 6 h comparable to convective drying, and the moisture content is dropped to 11% by decreasing the pressure during microwave drying. However, the rehydration time remains around 65 min for products from both ambient and low-pressure (400 Pa) microwave drying. In rehydration, the period is successfully reduced to 30 min by increasing the water temperature to 70 °C. The results indicate that microwave drying does not affect the value of crude protein and rehydrated products are comparable to fresh stink beans. From these findings, the microwave drying technique is an applicable technology for both manufacturers and consumers, with acceptable drying time and rehydration characteristics. [ABSTRACT FROM AUTHOR]

Drying is a commonly used technology that provides a long post-harvest storage time for produce such as sweet potatoes. Convective drying (CD) is a method that, when conditions are optimized, provides produce with a better appearance and improved textural properties. In this study, changes in water activity (aw), moisture content (MC), rehydration capacity (Rc), shrinkage (Sb) and color attributes were modelled for the optimization of drying factors (temperature, thickness and time) using response surface methodology (RSM). The total phenol content (TPC), total flavonoid content (TFC), total anthocyanin content (TAC) and antioxidant activity of CD samples (63.79 °C, 4.78 h, 3 mm) were investigated as functional aspects and compared with results for FD samples (−45 °C, one term). Optimum convective drying conditions caused an increase in general antioxidant properties, such as total phenol (TPC), total anthocyanin (TAC), DPPH and CUPRAC. The TPC was 190.94 mgGAE/100 g, the DPPH scavenging activity was 12.05%, the TAC was 11.37 mg/100 g, and the CUPRAC was 0.469 mmolTR/g in convectively dried samples under optimum conditions. Although improved appearance and textural properties are obtained by freeze drying, it is possible to produce sweet potatoes with good appearance and functional properties by optimizing the variables of the convective drying process. [ABSTRACT FROM AUTHOR]

In the present case study, a moisture diffusion model is developed to simulate the drying kinetics of Lavandula x allardii leaves for non-stationary convective drying regimes. Increasing temperature profiles are applied over the drying duration and the influence of temperature advancing rates on the moisture removal and the drying rate is investigated. The model assumes a one-dimensional moisture transfer under transient conditions, which occurs from the leaf center to the surface by liquid diffusion due to the concentration gradient developed by the surface water evaporation caused by the difference of water vapor partial pressure between the drying medium and the leaf surface. A numerical solution of Fick's 2nd law is obtained by an in-house code using the finite volume method, including shrinkage and a variable temperature-dependent effective moisture diffusion coefficient. The numerical results have been validated against experimental data for selected cases using statistical indices and the predicted dehydration curves presented a good agreement for the higher temperature advancing rates. The examined modeling approach was found stable and can output, in a computationally efficient way, the temporal changes of moisture and drying rate. Thus, the present model could be used for engineering applications involving the design, optimization and development of drying equipment and drying schedules for the examined type of non-stationary drying patterns. [ABSTRACT FROM AUTHOR]

The aim of this study was to determine the effects that the type of impregnating solution and drying method (freeze drying (FD) and vacuum drying (VD) at 45 °C and convective drying (CD) at 50, 60, and 70 °C) had on the physicochemical and quality properties of courgettes. Courgette slices were vacuum-impregnated (6 kPa) in freshly squeezed onion, kale, and onion and kale (50:50) juices with 3% NaCl solution (N). The application of vacuum impregnation (VI) with impregnating solutions from freshly squeezed onions and kale had a beneficial effect on the bioactive values of courgette. The highest contents of quercetin (41.84 μg/g d.m.) and carotenoids (276.04 μg/g d.m.) were found in courgette impregnated with onion juice after freeze drying. The highest values of lutein and zeaxanthin (216.42 μg/g d.m.) were recorded for courgette impregnated with kale juice and convective dried. By analysing the kinetics of convective drying, the best matching of the logistic model was found. Increasing the drying process temperature from 50 to 70 °C reduced the drying time from 15% to 36%, depending on the type of impregnating solution used. Water activity < 0.6 was recorded for courgette dried by freezing, vacuum, and convection at 60 and 70 °C. Conclusions: The vacuum impregnation process and the impregnation solutions from freshly squeezed vegetables can be used to develop new snacks with high levels of bioactive compounds. The FD method is the most appropriate considering both the bioactive compounds content and the obtained colour and water activity. [ABSTRACT FROM AUTHOR]

The conditions of convective drying induce a negative effect on the quality of the dried products, and thus, innovative solutions, such as the utilization of ultrasound and dehumidified air are gaining importance. Therefore, the aim of this study was to evaluate the impact of ultrasound pretreatment and variable air temperature on the kinetics of convective drying with dehumidified air and the quality of dried apples. Apples were dried with dehumidified and non-dehumidified air at 55, 70 and 85 °C. Preliminary ultrasound treatment was conducted by immersion for 60 min. The effect of both ultrasound and dehumidified air utilization was more prominent in the terms of drying time reduction, when lower drying temperatures were used. Drying of apples with dehumidified air, preceded by ultrasound pretreatment, resulted in a greater rehydration capacity of the products, and limited the browning process. Dehumidified air increased the lightness of the dried products, while sonication darkened them. The use of ultrasound before drying coupled with a drying with dehumidified medium at a temperature of 70 °C reduced the exposure of the product to a high temperature and oxygen. Products treated before dehumidified air drying with ultrasounds were characterized by high total phenolic content and the greatest antioxidant activity. This was because such technological treatment reduced exposure of the product to a high temperature and oxygen. [ABSTRACT FROM AUTHOR]

The residue generated from the processing of Tacinga inamoena (cumbeba) fruit pulp represents a large amount of material that is discarded without proper application. Despite that, it is a raw material that is source of ascorbic acid, carotenoids and phenolic compounds, which are valued in nutraceutical diets for allegedly combating free radicals generated in metabolism. This research paper presents a study focused on the mathematical modeling of drying kinetics and the effect of the process on the level of bioactive of cumbeba residue. The experiments of cumbeba residue drying (untreated or whole residue (WR), crushed residue (CR) and residue in the form of foam (FR)) were carried out in a fixed-bed dryer at four air temperatures (50, 60, 70 and 80 °C). Effective water diffusivity (Deff) was determined by the inverse method and its dependence on temperature was described by an Arrhenius-type equation. It was observed that, regardless of the type of pretreatment, the increase in air temperature resulted in higher rate of water removal. The Midilli model showed better simulation of cumbeba residue drying kinetics than the other models tested within the experimental temperature range studied. Effective water diffusivity (Deff) ranged from 6.4890 to 11.1900 × 10−6 m2/s, 2.9285 to 12.754 × 10−9 m2/s and 1.5393 × 10−8 to 12.4270 × 10−6 m2/s with activation energy of 22.3078, 46.7115 and 58.0736 kJ/mol within the temperature range of 50–80 °C obtained for the whole cumbeba, crushed cumbeba and cumbeba residue in the form of foam, respectively. In relation to bioactive compounds, it was observed that for a fixed temperature the whole residue had higher retention of bioactive compounds, especially phenolic compounds, whereas the crushed residue and the residue in the form of foam had intermediate and lower levels, respectively. This study provides evidence that cumbeba residue in its whole form can be used for the recovery of natural antioxidant bioactive compounds, mainly phenolic compounds, with the possibility of application in the food and pharmaceutical industries. [ABSTRACT FROM AUTHOR]

The aim of this study was to determine the effect of different drying methods: convective (at 50, 60, 70 °C), vacuum-microwave (at 120, 240, 360, 480 W and 360 W with reduction to 120 W) and hybrid (convective pre-drying at 50, 60, 70 °C followed by vacuum-microwave drying at 120 W) on the quality parameters of novel red-fleshed apple fruit snacks (RFAs), such as phenolics, on-line antioxidant capacity, water activity and color. Drying kinetics, including a temperature profile of dried material, and modified Page model were determined. Freeze-drying was used as a control method. The highest content of bioactive compounds in the samples was retained following freeze-drying, then hybrid, vacuum-microwave and finally convection drying. The antioxidant capacity measured by on-line 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt (ABTS), identified anthocyanins, flavan-3-ols and phenolic acid as the main compounds responsible for this activity. Unfavorable changes in color, formation of hydroxymethylfurfural (HMF) and degradation of polyphenolics were noted along with increasing drying temperature and magnetron power. The red-fleshed apple snacks are a promising high-quality dehydrated food product belonging to functional foods category. [ABSTRACT FROM AUTHOR]

This work represents an experimental study and mathematical modeling of convective apple slice drying. The influence of multiple process parameters such as temperature, air humidity, air velocity and slice thickness on process kinetics, product water activity and parameters of empirical models has been investigated. Drying characteristics of apple slices were monitored at temperatures of 40, 45 and 50 °C, air velocities of 0.6, 0.85 and 1.1 m/s., slice thicknesses of 4, 6, 8, 10 and 12 mm, and in relative air humidity ranges of 25–28, 35–38 and 40–45%. During the process, samples were dried from an initial moisture content of 86.7% to that of 20% (w.b), corresponding to product water activity of 0.45 ± 0.05. By increasing the temperature from 40 to 50 °C, the time for reaching the required product water activity decreased by about 300 min. Sample thickness is the most significant parameter; by increasing the slice thickness from 4 to 12 mm, the time required to achieve the required water activity increased by more than 500 min. For all experimental runs, parameters of five different thin-layer empirical models were estimated. A thin-layer model sensible to process conditions such as temperature, air velocity, layer thickness and air relative humidity was developed and statistically analyzed. [ABSTRACT FROM AUTHOR]

Mango has been described as a valuable source of nutrients and enzymes that are beneficial to human health. Drying at different temperatures not only affects the nutritional properties but can also contribute to the degradation of valuable enzymes in dried fruit. The novelty of this paper is to investigate the quality of hot air dried mango in terms of activity retention of the heat-sensitive enzymes (HSE). For this, HSE was first screened in fresh mango flesh of the variety Samar Bahisht (SB) Chaunsa. Later, the combined effect of different drying temperatures (40 °C, 50 °C, 60 °C, 70 °C, and 80 °C) and air velocities (1.0 ms−1 and 1.4 ms−1) on the activity retention of HSE in dried mango slices of the varieties Sindri, SB Chaunsa, and Tommy Atkins were investigated. The results showed that the drying temperature had a significant impact on the degradation of HSE, while at the same time some influence of the air velocity was also observed. Drying at 40 °C and an air velocity of 1.4 ms−1 retained more HSE compared to those samples dried at higher temperatures. The least retention of HSE was found in samples dried at 80 °C. [ABSTRACT FROM AUTHOR]

This study was focused on a comparative analysis of two drying methods, such as convective and infrared drying, on the red beetroot purées with lactic acid bacteria, as a strategy for tailoring the health benefits of the selected plant. For both varieties, the total betalain contents varied from 13.95 ± 0.14 mg/g dry weight in Beta vulgaris var. cylindra when compared with 11.09 ± 0.03 mg/g dry weight in Beta vulgaris var. vulgaris, whereas significant differences were found in total phenolic and flavonoid contents. Significant drying induced changes were found in selected bioactives, in terms of total betalains, flavonoids, and polyphenols, which influenced the antioxidant activities of the purées, structure, and color parameters. In general, infrared technology was more protective, leading to an increase of 20% in flavonoids content. One logarithmic decrease in cell viability was observed in all powders samples. After the in vitro digestion, the betalains decreased, in both gastric and intestinal simulated juices, with a more pronounced profile in infrared processed purées. Textural and rheological analysis of the dried purées highlighted that the infrared drying is milder compared to the conventional one, allowing us to obtain powders with enhanced functional properties, in terms of bioactives content, cell viability, color, and structural and rheological behavior. [ABSTRACT FROM AUTHOR]

The choice of the drying process plays a key role in reducing the costs of electricity consumption in the food industry. Thus, this study aimed to evaluate continuous and intermittent drying of rough rice, using empirical and diffusion models to describe the drying kinetics, considering only effective time of operation to compare and evaluate these processes. Experiments were carried out during the month of April 2018, in Campina Grande, Paraiba Brazil, and were conducted with continuous and intermittent drying of rough rice grains (about 20 g, each experiment) using a fixed-bed dryer with constant power, at temperatures of 50 and 70 °C. For the intermittent experiments, the intermittency ratio was α = 2/3 and the drying periods were 10 and 20 min, with intermittency periods of 20 and 40 min, respectively. Comparison between continuous and intermittent drying kinetics indicated reduction in the effective time of all intermittent drying experiments, reaching up to 32.2%, hence promoting energy saving. It was also found that a one-dimensional diffusion model with boundary condition of the first kind properly described all rough rice drying processes and that the effective mass diffusivity is higher in intermittent drying, compared to continuous drying at the same temperature. [ABSTRACT FROM AUTHOR]

Available literature and previous studies focus on the Pulsed Electric Field (PEF) parameters influencing the drying process of fruit and vegetable tissue. This study investigates the applicability of PEF pre-treatment considering the industrial-scale drying conditions of onions and related quality parameters of the final product. First, the influence of the PEF treatment (W = 4.0 kJ/kg, E = 1.07 kV/cm) on the convective drying was investigated for samples dried at constant temperatures (65, 75, and 85 °C) and drying profiles (85/55, 85/65, and 85/75 °C). These trials were performed along with the determination of the breakpoint to assure an industrial drying profile with varying temperatures. A reduction in drying time of 32% was achieved by applying PEF prior to drying at profile 85/65 °C (target moisture ≤7%). The effective water diffusion coefficient for the last drying section has been increased from 1.99 × 10−10 m2/s to 3.48 × 10−10 m2/s in the PEF-treated tissue. In case of the 85/65 °C drying profile, the PEF-treated sample showed the highest benefits in terms of process efficiency and quality compared to the untreated sample. A quality analysis was performed considering the colour, amount of blisters, pyruvic acid content, and the rehydration behavior comparing the untreated and PEF-treated sample. The PEF-treated sample showed practically no blisters and a 14.5% higher pyruvic acid content. Moreover, the rehydration coefficient was 47% higher when applying PEF prior to drying. [ABSTRACT FROM AUTHOR]

Apple slices of the Elise variety were previously osmo-dehydrated in erythritol, xylitol, and sucrose for 2 h. In some parts of the experiment, 30 min of ultrasound pre-treatment (US) were applied. Afterwards, fruit samples were dried by convective (CD), microwave-vacuum (VM), and a combined method (CD/VM, mix two of them). The main aim of the research was to characterize an impact of osmotic dehydration, sonication pre-treatment, and drying method on the physicochemical properties of the dried apples. The use of sugar alcohols (xylitol, erythritol) in the production of dried apples did not badly affect the taste of the obtained dried products; it enabled a noticeable cooling/refreshing effect felt in the mouth when consuming a snack, and enabled the production of dried snacks with lower calorific value. Polyol residues in the product were at a level that was safe for consumers. The most popular convective drying was long lasting, whereas the VM drying method allowed for the shortest drying time, amounting to 76 min; moreover, additional application of ultrasounds reduced this time to 36 min. The combined drying method allowed the total duration of the process to be reduced 2–4.5 times. Ultrasound applied during osmotic dehydration did not significantly affect attributes of the descriptive sensory analysis for the obtained dried apples. The best hygroscopic properties, ensuring the storage stability of the dried product, showed dried apples previously osmo-dehydrated in erythritol and sucrose solutions. [ABSTRACT FROM AUTHOR]

Guava is widely consumed because of its agro-industrial use, and its antioxidant properties attributed to vitamin C and carotenoids content. However, it has a short shelf life. Guava has been dried by atomization, fluidized bed, lyophilization (FD) and convective drying (CD). CD requires long operation times and the product characteristics are not desirable. In contrast, FD produces high quality products, but requires long processing times, high energy consumption and high operation costs. As an alternative, the Refractance Window® (RW) drying is relatively simple and cheap technique. The objective of this study was to compare the effect of CD, FD and RW techniques, on the moisture content, water activity, color, porosity, volume change, vitamin C and carotenoids content in guava samples. The samples dried by RW required less time to reduce the moisture content and exhibited smaller changes in color than CD or FD. There were greater losses of carotenoids and vitamin C when drying by CD whereas RW had similar losses than FD. Lyophilized products exhibited minor change in volume and greater porosity. RW results in better retention of properties, compared with other drying techniques. Based on this, RW is a promising technique for the development of guava snacks. [ABSTRACT FROM AUTHOR]

Raspberries are one of Serbia's best-known and most widely exported fruits. Due to market fluctuation, producers are looking for ways to preserve this fresh product. Drying is a widely accepted method for preserving berries, as is the case with freeze-drying. Hence, the aim was to evaluate convective drying as an alternative to freeze-drying due to better accessibility, simplicity, and cost-effectiveness of Polana raspberries and compare it to a freeze-drying. Three factors were in experimental design: air temperature (60, 70, and 80 °C), air velocity (0,5 and 1,5 m · s−1), and state of a product (fresh and frozen). Success of drying was evaluated with several quality criteria: shrinkage (change of volume), color change, shape, content of L-ascorbic acid, total phenolic content, flavonoid content, anthocyanin content, and antioxidant activity. A considerable influence of convective drying on color changes was not observed, as ΔE was low for all samples. It was obvious that fresh raspberries had less physical changes than frozen ones. On average, convective drying reduced L–ascorbic acid content by 80.00–99.99%, but less than 60% for other biologically active compounds as compared to fresh raspberries. Convective dried Polana raspberry may be considered as a viable replacement for freeze-dried raspberries. [ABSTRACT FROM AUTHOR]