Search

The replacement of gold bonding wire with silver bonding wire can significantly reduce the cost of wire bonding. This paper provides a comprehensive overview of silver wire bonding technology. Firstly, it introduces various types of silver-based bonding wire currently being studied by researchers, including pure silver wire, alloy silver wire, and coated silver wire, and describes their respective characteristics and development statuses. Secondly, the development of silver-based bonding wire in manufacturing and bonding processes is analyzed, including common silver wire manufacturing processes and their impact on silver wire performance, as well as the impact of bonding parameters on silver wire bonding quality and reliability. Subsequently, the reliability of silver wire bonding is discussed, with a focus on analyzing the effects of corrosion, electromigration, and intermetallic compounds on bonding reliability, including the causes and forms of chlorination and sulfurization, the mechanism and path of electromigration, the formation and evolution of intermetallic compounds, and evaluating their impact on bonding strength and reliability. Finally, the development status of silver wire bonding technology is summarized and future research directions for silver wire are proposed. [ABSTRACT FROM AUTHOR]

Aiming to resolve the practical problem of brown rice kernels being easily broken due to overprocessing during processing (milling and polishing), brown rice kernels of Japonica rice, after hulling, were used as the research object in this study. Firstly, through a texture meter test, the discrete element bonding parameters (Kn is normal stiffness per unit area, Kτ is tangential stiffness per unit area, Cn is critical normal stiffness, Cτ is critical shear stiffness) were obtained. Secondly, a brown rice kernels' bonding particle model was established by EDEM, and then a second orthogonal rotational combination test was carried out to calibrate the discrete bonding parameters, Kn = 4.43 × 1012 N/m3, Kτ = 6.13 × 1011 N/m3, Cn = 2.55 × 107 Pa, and Cτ = 7.92 × 107 Pa. The error of parameter calibration was within 5%, and the results were able to reflect the actual situation more realistically. Finally, analysis of the crushing process of brown rice kernels showed that their ability to withstand shear damage was not as great as their pressure-bearing capacity. The design of the relevant mechanism and the setting of parameters should be based on the critical shear stiffness of brown rice kernels, and the actual shear force Fτ* set during the processing should be smaller than the theoretical critical shear force Fτ (Fτ* < Fτ = 9.11 N). This study can provide a theoretical basis for optimizing the key structure and operating parameters of rice milling machines and polishing machines to effectively solve the practical problem of increased crushing of brown rice kernels due to overprocessing. [ABSTRACT FROM AUTHOR]

There will be great damage in the process of harvesting, transporting, and storing after grain matures. The injury rate is as high as 8% to 12%. After damage, the germination rate of the grain becomes lower, the quality decreases, and it is easily infected with pests and molds. This study of the grain-crushing characteristics is of great significance to ensure grain quality, and an accurate crushing model is a prerequisite for effectively simulating crushing characteristics. This paper studies the shattering characteristics of wheat grains. Two-dimensional slices of wheat grain were obtained using X-ray tomography technology. Then, an accurate three-dimensional outer contour model of the wheat particle was constructed using image filtering and segmentation algorithms. The particle filling process was conducted using EDEM 2018 software to establish a wheat particle simulation model based on the Hertz–Mindlin with a Bonding contact model. Using the DOE experimental design method, single-factor experiments, Plackett–Burman experiments, steepest-climb experiments, and Box–Behnken were designed to study the fragmentation characteristics of wheat particles combined with parameter calibration and physical experiments. The test results show that the normal stiffness per unit area is 7.392 × 1010 N/m3, critical normal stress is 5.293 × 106 Pa, critical tangential stress is 5.001 × 106 Pa, and the relative error about 3%, which verifies the reliability of the simulation parameters in the discrete-element crushing model of wheat grain. This study focuses on two essential aspects: 1. establishing an accurate wheat-grain contour model; and 2. calibrating the bonding parameters of the discrete-element simulation model of wheat grain. The wheat grain discrete-element crushing model and the calibration of its bonding parameters are constructed to provide a foundation for the study of wheat-grain crushing characteristics. It is of great significance to study the situation of wheat grains and where cracks are produced. In this paper, an accurate model of the wheat-grain contour is established, and the bonding parameters of the discrete-element simulation model of the wheat grain are calibrated. The calibration of the model of the discrete elements of wheat-grain fragmentation and its bonding parameters will provide a basis for studying the crushing characteristics of wheat grain. Understanding the condition of wheat grains and the causes of cracks carries significant academic significance. [ABSTRACT FROM AUTHOR]

We report on the Sm3+ and Sm3+:Yb3+-doped barium fluorotellurite glasses prepared using the conventional melting and quenching method. The spectroscopic characterisations were investigated with Raman and FTIR to evaluate the glasses' structural and hydroxyl (-OH) content. The Raman analysis revealed a structural modification in the glass network upon adding and increasing the Yb3+ concentration from a TeO3 trigonal pyramid to a TeO4 trigonal bi-pyramid polyhedral. At the same time, the FTIR measurements showed the existence of -OH groups in the glass. Thus, under the current experimental conditions and nominal composition, the -OH group contents are too large to enable an effective removal. The near-infrared region of the absorption spectra is employed to determine the nephelauxetic ratio and bonding parameters. The average nephelauxetic ratio decreases, and the bonding parameter increases with the increasing Yb3+ content in the glasses. A room temperature visible and near-infrared photoluminescence ranging from 500 to 1500 nm in wavelength and decay properties were investigated for glasses doped with Sm3+ and Sm3+-Yb3+ by exciting them with 450 and 980 nm laser sources. Exciting the Sm3+- and Sm3+-Yb3+-doped glasses by 450 nm excitation reveals a new series of photoluminescence emissions at 1200, 1293, and 1418 nm, corresponding to the 6F11/2 state to the 6HJ (J = 7/2, 9/2, 11/2) transitions. Under the 976 nm laser excitation, a broad photoluminescence emission from 980 to 1200 nm was detected. A decay lifetime decreased from ~244 to ~43 μs by increasing the Yb3+ content, ascribing to concentration quenching and the OH content. [ABSTRACT FROM AUTHOR]