Search

This study evaluates the efficacy of [131I]I-ERIC1 in targeting and inhibiting the growth of SCLC tumors in mice, focusing on tumor accumulation and regression and potential side effects. NCAM-positive NCI-H69 SCLC cells were implanted in CB 17 SCID mice, and [131I]I-ERIC1 biokinetics were measured in organs and tissues at four post-injection time points (24, 72, 96, and 120 h). The experimental series compared tumor growth, survival, and changes in blood counts among three treatment groups (1, 2, or 3 MBq) and a control group, with treatments initiated either two or five days post implantation. [131I]I-ERIC1 was synthesized with >95% radiochemical purity and a specific activity of 15 TBq/mmol. Tumor activity peaked at 31.5 ± 6.6% ID/g after four days, demonstrating significant antitumor efficacy, which resulted in sustained remission and extended survival. Hematological toxicity was observed, with the optimal dose identified as 2 MBq per animal administered two days post implantation. [131I]I-ERIC1 shows promise as a theranostic agent for personalized cancer treatment by effectively targeting SCLC tumors with manageable side effects. However, further studies are required to optimize dosing strategies and minimize toxicity. [ABSTRACT FROM AUTHOR]

Global fertilizer production and mismanagement significantly contribute to many harmful environmental impacts, revealing the need for a greater understanding of crop growth and nutrient uptake, which can be used to optimize fertilizer management. This study experimentally adapts first-principles microbial modeling techniques to the hydroponic cultivation of Bibb lettuce (Lactuca sativa) under nitrogen-limited conditions. Monod and Michaelis–Menten's approaches are applied to predict biomass productivity and nutrient uptake and to evaluate the feasibility of reclaimed wastewater as a nutrient source of nitrogen. Experimental and modeling results reveal significantly different kinetic saturation constants ( K s = 1.331 and K m = 17.887 mg L−1) and a corresponding cell yield strongly dependent on nutrient concentration, producing visually and compositionally distinct tissue between treatments receiving ≤ 26.2 and ≥ 41.7 m g N L−1. The resulting Monod model overestimates dry mass predictions during low nutrient conditions, and the collective results support the development of a dynamic Monod curve that is temporally dependent during the plants' lifecycle. Despite this shortcoming, these results support the feasibility of reclaiming nitrogen from wastewater in hydroponic agriculture, expecting to produce lesser biomass lettuce exhibiting healthy tissue. Furthermore, this study provides a mathematical foundation for agricultural simulations and nutrient management. [ABSTRACT FROM AUTHOR]

Introduction: The biokinetics of radioiodine (RAI) in thyroid cancer patients are complex. This study aims to develop a practical approach for assessing RAI biokinetics to predict patient discharge time and estimate radiation exposure to caregivers. Methods: We retrospectively reviewed data from patients with differentiated thyroid carcinoma undergoing RAI treatment. Serial radiation dose rates were dynamically collected during hospitalization and fitted to a biexponential model to assess the biokinetic features: RAI uptake fraction of thyroid tissue (Ft) and effective half-life of extra-thyroid tissue (Tet). Correlations with 99mTc thyroid uptake ratio (TcUR), radiation retention ratio (RR), renal function, and body mass index (BMI) were analyzed. Results: Thirty-five patients were enrolled. The derived Ft was 0.08 ± 0.06 and Tet was 7.57 ± 1.45 h. Pearson's correlation analysis revealed a significant association between Ft and both TcUR and RR (p < 0.05), while Tet correlated with renal function and BMI (p < 0.05). Conclusion: This novel and practical method assessing RAI biokinetics demonstrates consistency with other parameters and related studies, enhancing the model reliability. It shows promise in predicting an appropriate discharge time and estimating radiation exposure to caregivers, allowing for modifications to radiation protection precautions to follow ALARA principle and minimize the potential risks from radiation exposure. [ABSTRACT FROM AUTHOR]

A mathematical model for estimating the characteristics of the process of thermal inactivation of vegetative bacterial cells and their spores is presented. The model relates the change rate of the number of living cells as a nonlinear kinetic dependence of the p-th order, and the temperature constant of their inactivation rate is the Arrhenius function. A method for solving the inverse kinetic problem of identifying the parameters of this model from experimental data is proposed. The method is implemented through the minimization of the original functional, which reduces the number of variable parameters. The solution results of inverse problems for determining the kinetic model parameters based on the experimental data of thermal inactivation of bacterial spores B. subtilis and B. anthracis are presented. The obtained parameters are used to solve the direct problems of the dynamics of micro-organism inactivation. The calculation results represent the dependence on the time of the change number of inactivated micro-organisms, and the thermal exposure time for 99% of their deaths at different temperatures. A comparison of the results with other authors' calculations and experimental data confirms the adequacy of the model, the high accuracy of the new solution method and the algorithm for its implementation. The developed model of thermal sterilization can be used for the selective deactivation of pathogens in the food products. [ABSTRACT FROM AUTHOR]

Decommissioning fission and fusion facilities can result in the production of airborne particles containing tritium that could inadvertently be inhaled by workers directly involved in the operations, and potentially others, resulting in internal exposures to tritium. Of particular interest in this context, given the potentially large masses of material involved, is tritiated steel. The International Commission on Radiological Protection (ICRP) has recommended committed effective dose coefficients for inhalation of some tritiated materials, but not specifically for tritiated steel. The lack of a dose coefficient for tritiated steel is a concern given the potential importance of the material. To address this knowledge gap, a "dissolution" study, in vivo biokinetic study in a rodent model (1 MBq intratracheal instillation, 3-month follow-up) and associated state-of-the-art modelling were undertaken to derive dose coefficients for model tritiated steel particles. A committed effective dose coefficient for the inhalation of 3.3 × 10−12 Sv Bq−1 was evaluated for the particles, reflecting an activity median aerodynamic diameter (AMAD) of 13.3 µm, with the value for a reference AMAD for workers (5 µm) of 5.6 × 10−12 Sv Bq−1 that may be applied to occupational inhalation exposure to tritiated steel particles. [ABSTRACT FROM AUTHOR]

Considerable progress has been made in various fields of applied research on the use of carbon nanotubes (CNTs). Because CNTs are fibrous nanomaterials, biosafety of CNTs has been discussed. The biokinetic data of CNTs, such as using the radioisotope of carbon and surface labeling of CNTs, have been reported. However, the use of radioisotopes requires a special facility. In addition, there are problems in the surface labeling of CNTs, including changes in surface properties and labels eliminating over time. In order to solve these problems and properly evaluate the biokinetics of CNTs, the authors synthesize peapods with platinum (Pt) encapsulated within the hollow region of Double-Walled CNTs (DWCNTs) and develop a new system to evaluate biokinetics using widely available imaging equipment. In the cell assay, no significant difference is observed with and without Pt in CNTs. In animal studies, radiography of the lungs of rats that inhaled Pt-peapods show the detectability of Pt inside the CNTs. This new method using Pt-peapods enables image evaluation with a standard radiographic imaging device without changing the surface property of the CNTs and is effective for biokinetics evaluation of CNTs. [ABSTRACT FROM AUTHOR]

Pharmacokinetic modeling of the radiopharmaceuticals used in molecular radiotherapy is an important step towards accurate radiation dosimetry of such therapies. In this paper, we present a pharmacokinetic model for CLR1404, a phospholipid ether analog that, labeled with 124I/131I, has emerged as a promising theranostic agent. We follow a systematic approach for the model construction based on a decoupling process applied to previously published experimental data, and using the goodness-of-fit, Sobol's sensitivity analysis, and the Akaike Information Criterion to construct the optimal form of the model, investigate potential simplifications, and study factor prioritization. This methodology was applied to previously published experimental human time-activity curves for 9 organs. The resulting model consists of 17 compartments involved in the CLR1404 metabolism. Activity dynamics in most tissues are well described by a blood contribution plus a two-compartment system, describing fast and slow uptakes. The model can fit both clinical and pre-clinical kinetic data of 124I/131I. In addition, we have investigated how simple fits (exponential and biexponential) differ from the complete model. Such fits, despite providing a less accurate description of time-activity curves, may be a viable alternative when limited data is available in a practical case. [ABSTRACT FROM AUTHOR]

By incorporating a temperature-dependent biokinetic and thermal model, the novel method, cold-water microbial enhanced oil recovery (MEOR), was developed under nonisothermal conditions. The suggested model characterized the growth for Bacillus subtilis (microbe) and Surfactin (biosurfactant) that were calibrated and confirmed against the experimental results. Several biokinetic parameters were obtained within approximately a 2% error using the cardinal temperature model and experimental results. According to the obtained parameters, the examination was conducted with several injection scenarios for a high-temperature reservoir of 71 °C. The results proposed the influences of injection factors including nutrient concentration, rate, and temperature. Higher nutrient concentrations resulted in decreased interfacial tension by producing Surfactin. On the other hand, injection rate and temperature changed growth condition for Bacillus subtilis. An optimal value of injection rate suggested that it affected not only heat transfer but also nutrient residence time. Injection temperature led to optimum reservoir condition for Surfactin production, thereby reducing interfacial tension. Through the optimization process, the determined optimal injection design improved oil recovery up to 53% which is 8% higher than waterflooding. The proposed optimal injection design was an injection sucrose concentration of 100 g/L, a rate of 7 m3/d, and a temperature of 19 °C. [ABSTRACT FROM AUTHOR]