Search

The current study proceeded to reduce the environmental hazards spreading worldwide due to synthetic dyes. To overcome these problems, eco-friendly natural dyes are introduced as alternative sources of synthetic dyes. The present study was focused on exploring the bio-colorant of the aqueous and acidic extract of the bark of Melia azedarach L. for the dyeing of both silk and cotton samples. The results of the extraction medium specified that the aqueous extract gave maximum colorant solubility and upon fabric dyeing produced higher color strength in contrast to the acidic medium. The optimization experimentation data showed that excellent color strength of silk fabric was found at 45 min dyeing time duration, in 35:1 mL dye extract, and using 2% salt (NaCl) as an exhausting agent, whereas cotton fabric showed the maximum K/S value at 60 min dyeing time, in a 45:1 mL liquor ratio, and with the use of 2% salt. Bio-mordants produce different shades on both fabrics. Bio-mordanting experiments on silk revealed that pre-mordanting with 2% turmeric and 3% pomegranate, and post-mordanting using 3% turmeric and 2% pomegranate produced a darker shade. In the case of cotton, the pre-mordanted samples with 2% turmeric and 3% pomegranate and the post-mordanted samples with 4% turmeric and 4% pomegranate gave the highest color strengths. All the mordanted samples gave excellent fastness ratings. Overall, it has been found that Bakain bark proved to be an excellent source of tannin. The result of this study showed that it could be a cost-effective and eco-friendly dye source for textile progress. [ABSTRACT FROM AUTHOR]

The textile industry stands as a prominent contributor to global environmental pollution, primarily attributable to its extensive reliance on synthetic dyes, hazardous components, and solvents throughout the textile dyeing and treatment processes. Consequently, the pursuit of sustainable textile solutions becomes imperative, aimed at replacing these environmentally unfriendly constituents with biobased and bioactive pigments, antibacterial agents, and, notably, natural solvents. Achieving this goal is a formidable yet indispensable challenge. In this study, the dyeing ability of the crude gel prodigiosin, produced by non-pathogenic bacteria Serratia plymuthica, was investigated on various multifiber fabrics at different conditions (temperature and pH) and by using salts and alternative mordants (the conventional Ferrous Sulphate (FeSO4) and a new bio-mordant, L-Cysteine (L-Cys)). Additionally, a novel gel-based Choline chloride (ChCl)/Lactic acid (LA) (1:2) deep eutectic solvent (DES) dyeing medium was studied to replace the organic solvents. Nylon fabrics dyed with 3.0% over the weight of the fiber (owf) L-Cys at pH = 8.3 had improved color fastness to washing, while the gel-based ChCl/LA (1:2) DES dyebath provided a better color fastness to light. Moreover, nylon fabrics under these conditions exhibited remarkable antimicrobial activity against Staphylococcus aureus (S. aureus) and Pseudomonas aeruginosa (P. aeruginosa). In conclusion, the utilization of the crude gel-based prodigiosin pigment demonstrates a distinct advantage in dyeing textile materials, aligning with the growing consumer demand for more eco-friendly and sustainable products. Additionally, the application of the natural reducing agent L-Cys, previously untested as a bio-mordant, in conjunction with the use of gel-based DES as a dyeing medium, has showcased improved colorimetric and antibacterial properties when applied to nylon that is dyed with the crude gel prodigiosin pigment. [ABSTRACT FROM AUTHOR]

Today, the global community is appreciating green technologies in the application of green products in textiles. The aim of the current study is to use a sustainable heating technique for the isolation of colorant from plant sources and to use eco-friendly anchors to improve the fastness of dyed fabrics with new shades. The current study used microwave radiation to isolate natural colorants from saffron (Crocus sativus) and safflower (Carthamus tinctorius L.) petals for polyamide (nylon) fabric dyeing. For this purpose, acidic extract and fabric were exposed to MW treatment for up to 6 min and employed at various conditions. To make the dyeing process sustainable, bio-mordants have been employed and compared with synthetic mordants. It has been found that 6 min is the optimal radiation time for the isolation of colorant to get good results onto irradiated polyamide (nylon) fabric when employed at 65 °C for 45 min containing 1 g/100 mL of table salt for saffron and 3 g/100 mL of table salt for safflower dyeing. For improving color strength and giving an acceptable rating of fastness, 7% of turmeric as a pre-bio mordant and 7% pomegranate as a post-mordant has given high results using saffron extract. Similarly, with safflower extract, 5% of turmeric as a pre-mordant and 5% of turmeric extracts as a post-mordant have given high results as compared to chemical mordants used. It is concluded that microwave treatment has a high potential for investigating the coloring efficacy of crocin-containing saffron petals and safflower petals as carthamin as a yellow natural dye for bio-mordanted polyamide fabrics. It is recommended that such tools for the isolation of colorant from new dye-producing plants should be used, whereas green mordants should be used to develop new colorfast shades to make process more green and sustainable. [ABSTRACT FROM AUTHOR]

Natural dye's poor affinity for cotton and poor fastness properties still hinder its applications in the textile industry. In this study, a doubled-layered chitosan coating was cured on cotton fabric to serve as bio-mordant and form a protective layer on it. Under the optimal treatment conditions, the maximum qe (adsorption amount) of the natural dye sodium copper chlorophyllin (SCC) calculated from the Langmuir isothermal model was raised from 4.5 g/kg to 19.8 g/kg. The dye uptake of the treated fabric was improved from 22.7% to 96.4% at 1% o.w.f. dye concentration. By a second chitosan layer cured on the dyed fabric via the cross-linking method, the wash fastness of the cotton fabric dyed with SCC can be improved from 3 to 5 (ISO 105 C-06). The natural source of the biopolymer material, chitosan, and its ability to biodegrade at end of life met with the initial objective of green manufacturing in applying natural dyes and natural materials to the textile industry. [ABSTRACT FROM AUTHOR]