Search

In this paper, experimental and numerical studies were conducted to differentiate solvent exsolution and liberation processes from different heavy oil–solvent systems in bulk phases and porous media. Experimentally, two series of constant-composition-expansion (CCE) tests in a PVT cell and differential fluid production (DFP) tests in a sandpacked model were performed and compared in the heavy oil–CO2, heavy oil–CH4, and heavy oil–C3H8 systems. The experimental results showed that the solvent exsolution from each heavy oil–solvent system in the porous media occurred at a higher pressure. The measured bubble-nucleation pressures (Pn) of the heavy oil–CO2 system, heavy oil–CH4 system, and heavy oil–C3H8 system in the porous media were 0.24 MPa, 0.90 MPa, and 0.02 MPa higher than those in the bulk phases, respectively. In addition, the nucleation of CH4 bubbles was found to be more instantaneous than that of CO2 or C3H8 bubbles. Numerically, a robust kinetic reaction model in the commercial CMG-STARS module was utilized to simulate the gas exsolution and liberation processes of the CCE and DFP tests. The respective reaction frequency factors for gas exsolution (rffe) and liberation (rffl) were obtained in the numerical simulations. Higher values of rffe were found for the tests in the porous media in comparison with those in the bulk phases, suggesting that the presence of the porous media facilitated the gas exsolution. The magnitudes of rffe for the three different heavy oil–solvent systems followed the order of CO2 > CH4 > C3H8 in the bulk phases and CH4 > CO2 > C3H8 in the porous media. Hence, CO2 was exsolved from the heavy oil most readily in the bulk phases, whereas CH4 was exsolved from the heavy oil most easily in the porous media. Among the three solvents, CH4 was also found most difficult to be liberated from the heavy oil in the DFP test with the lowest rffl of 0.00019 min−1. This study indicates that foamy-oil evolution processes in the heavy oil reservoirs are rather different from those observed from the bulk-phase tests, such as the PVT tests. [ABSTRACT FROM AUTHOR]

In this study, we conducted an extensive investigation into broadband near-infrared luminescence of Cr3+-doped Ca3Y2Ge3O12 garnet, employing first-principles calculations within the density functional theory framework. Our initial focus involved determining the site occupancy of Cr3+ activator ions, which revealed a pronounced preference for the Y3+ sites over the Ca2+ and Ge4+ sites, as evidenced by the formation energy calculations. Subsequently, the geometric structures of the excited states 2E and 4T2, along with their optical transition energies relative to the ground state 4A2 in Ca3Y2Ge3O12:Cr3+, were successfully modeled using the ΔSCF method. Calculation convergence challenges were effectively addressed through the proposed fractional particle occupancy schemes. The constructed host-referred binding energy diagram provided a clear description of the luminescence kinetics process in the garnet, which explained the high quantum efficiency of emission. Furthermore, the accurate prediction of thermal excitation energy yielded insights into the thermal stability of the compound, as illustrated in the calculated configuration coordinate diagram. More importantly, all calculated data were consistently aligned with the experimental results. This research not only advances our understanding of the intricate interplay between geometric and electronic structures, optical properties, and thermal behavior in Cr3+-doped garnets but also lays the groundwork for future breakthroughs in the high-throughput design and optimization of luminescent performance and thermal stability in Cr3+-doped phosphors. [ABSTRACT FROM AUTHOR]

Many non-traditional isotopes, such as chlorine, magnesium, calcium, etc., are widely used as groundwater tracers. A new sample processing protocol of purification and concentration for isotopic analysis is presented to overcome many of the major drawbacks of existing methods. Contemporary sample preparation often requires several laborious off-line procedures in a ultra clean laboratory prior to instrumental determination; additionally, interference ions in real samples are difficult to completely remove, especially when the concentration of those ions is equal to that of the target ions. The new protocol includes the following steps: (i) one-step purification using a newly developed isotopic preparative chromatograph (IPC) with a background suppressed mode to obtain extremely pure components that only have target ions and H2O; (ii) enrichment of the collected pure solution from the previous step using a newly developed ultra clean concentrator filled with high purity nitrogen; (iii) transforming the enriched target ion into suitable speciation inside the ultra clean concentrator; (iv) finally, sending the enriched solutions to a multi-collector inductively coupled-plasma mass-spectrometer (MC-ICP-MS) or thermal ionization mass spectrometer (TIMS). The present method was validated using certified reference materials and real samples for both chlorine and magnesium; the precision of chlorine ratio value was generally below 0.22‰ and that of Mg was below 0.12‰. This processing protocol provides a potential method for isotope sample preparation and analysis in a small number of geological samples with low concentrations of many other elements or compounds such as nitrate, sulfate, lithium, calcium, strontium, etc. [ABSTRACT FROM AUTHOR]

Magnetic resonance (MR) imaging is an important computer-aided diagnosis technique with rich pathological information. The factor of physical and physiological constraint seriously affects the applicability of that technique. Thus, computed tomography (CT)-based radiotherapy is more popular on account of its imaging rapidity and environmental simplicity. Therefore, it is of great theoretical and practical significance to design a method that can construct an MR image from the corresponding CT image. In this paper, we treat MR imaging as a machine vision problem and propose a multi-conditional constraint generative adversarial network (GAN) for MR imaging from CT scan data. Considering reversibility of GAN, both generator and reverse generator are designed for MR and CT imaging, respectively, which can constrain each other and improve consistency between features of CT and MR images. In addition, we innovatively treat the real and generated MR image discrimination as object re-identification; cosine error fusing with original GAN loss is designed to enhance verisimilitude and textural features of the MR image. The experimental results with the challenging public CT-MR image dataset show distinct performance improvement over other GANs utilized in medical imaging and demonstrate the effect of our method for medical image modal transformation. [ABSTRACT FROM AUTHOR]

Simple Summary: The variability of chlorophyll a yields per unit nitrogen (Chla/TN), or phosphorus (Chla/TP) and its influencing factors were evaluated in eutrophic shallow Lake Taihu, China. The results indicated warming and longer sunshine hours promoted Chla/TN and Chla/TP in winter months from 2005 to 2017, which may cause severer blooms in winter and spring. However, a more stable water column due to atmospheric stilling and water level elevation mainly led to the increasing Chla/TN and Chla/TP in remaining months from 2005 to 2017, allowing algae to grow better. The results also indicated that water stability promotes algal growth mainly due to improved light availability. As atmospheric stilling is an aspect of global climate changes, this study would affect future algal bloom mitigation efforts in shallow lakes worldwide. Algal blooms are environmental challenges confronting lakes worldwide and are significantly influenced by chlorophyll a yields per unit phosphorus (Chla/TP), or nitrogen (Chla/TN). Here, the influence of inter-annual hydrometeorological variations on Chla/TP and Chla/TN were evaluated in eutrophic shallow Lake Taihu, China. Our results demonstrated significant increases (p < 0.001) in both Chla/TN and Chla/TP from 2005 to 2017, and increased Chla yields during the winter months were mainly correlated with higher water temperature and longer sunshine hours, which may cause severer blooms in winter and spring. In remaining months from 2005 to 2017, typical associations between atmospheric stilling (or water level elevation) and higher Chla yields were observed. The results also indicate that atmospheric stilling and water level elevation significantly (p < 0.001) decreased background turbidity and promoted buoyant cyanobacterial biomass, alleviating phytoplankton light limitation. Given the subtropical location, eutrophic status, and high background turbidity of Lake Taihu, light may be the critical limiting factor for summer phytoplankton growth; thus, improved light availability would promote Chla yields until self-shading caused further light limitations. If the mechanism is general, promoting the effect of atmospheric stilling on annual peak Chla in shallow lakes may be greatly underestimated, and our finding will affect future bloom mitigation efforts in such systems. [ABSTRACT FROM AUTHOR]

As carbon dioxide (CO2) adsorbents, porous materials with high specific surface areas and abundant CO2-philic groups always exhibit high CO2 capacities. Based on this consensus, a category of oxygen-rich macroporous carbon foams was fabricated from macroporous resorcinol-formaldehyde resins (PRFs), which were obtained via an oil-in-water concentrated emulsion. By the active effect of potassium hydroxide (KOH) at high temperatures, the resultant carbon foams (ACRFs) possessed abundant micropores with rich oxygen content simultaneously. At the same time, most of the ACRFs could retain the marcoporous structure of their precursor. It is found that porosity of ACRFs was mainly determined by carbonization temperature, and the highest specific surface areas and total pore volume of ACRFs could reach 2046 m2/g and 0.900 cm3/g, respectively. At 273 K, ACRFs showed highest CO2 capacity as 271 mg/g at 1 bar and 91.5 mg at 15 kPa. Furthermore, it is shown that the ultra-micropore volume was mainly responsible for the CO2 capacities of ACRFs at 1 bar, and CO2 capacities at 15 kPa were mainly affected by the oxygen content. It is also found that the presence of macropores would accelerate ACRFs adsorbing CO2. This study provides ideas for designing a porous CO2 adsorbent. [ABSTRACT FROM AUTHOR]

Friction welding is a popular process for joining metal and polymer work pieces by rubbing them against each other. This way, friction heat is generated in a zone of the faying surfaces, thinner than 1 mm. After cooling down, the heated surfaces establish a tight and strong bond. To improve this joining process, a method is desirable allowing measuring generated temperature and shear stress in the zone between the joining work pieces. Unfortunately, this is a very difficult task because the welding zone cannot be accessed with a sensor without significantly altering the process and thereby the desired measurement results. This paper describes how shear stress and temperature change generated by rubbing polymer pieces in a friction welding machine have been measured between the faying surfaces by employing sensor foils from the piezoelectric and pyroelectric polymer polyvinylidene fluoride (PVDF). This way, heating and cooling rates, pressure rise of the pneumatic system, frequency rise of the starting machine, the duration of starting and stopping, the damping of the vibrations after the drive was stopped, and the stress generated by the pullback of the machine head have been measured. A careful characterization of the sensor was necessary to enable distinguishing the measured voltage due to straining, shearing and temperature change. [ABSTRACT FROM AUTHOR]

Toxoplasma gondii is an intracellular parasite that infects humans and other warm-blooded animals. Exosomes are endocytic-derived vesicles released by cells, representing an important mode of intercellular communication. In exosomes, specific molecules of proteins, lipids, and mRNAs or miRNAs have been detected, some of which are capable of transferring biologically active molecules to recipient cells. Dendritic cells (DCs) are the only antigen-presenting cells (APCs) that activate the initial immune response. In this study, high-throughput sequencing was used to analyze the exosomal miRNA profile of DC2.4 cells infected with Toxoplasma gondii for 28 h, compared with those of uninfected DC2.4 cells. Differential exosomal miRNAs (DEmiRs) from these two cell groups were analyzed. Through high-throughput sequencing, 3434 DEmiRs were obtained, and 12 stably enriched DEmiRNAs were verified by Reverse Transcription-quantitative Polymerase Chain Reaction (RT-qPCR) and selected for further analysis. The target genes of these 12 miRNAs were predicted with online analysis software and subjected to bioinformatics analyses including protein–protein interaction (PPI) network analysis, key driver analysis (KDA), gene ontology (GO) enrichment, and Kyoto encyclopedia of genes and genomes (KEGG) pathway analysis. These DEmiRs were found to be associated with a variety of biological processes and signaling pathways involved in host ubiquitin system, innate immunity, biosynthesis, and transferase activity and could be potential biomarkers for T. gondii infection. [ABSTRACT FROM AUTHOR]

Human bocavirus 1 (HBoV1) infects well-differentiated (polarized) human airway epithelium (HAE) cultured at an air-liquid interface (ALI). In the present study, we applied next-generation RNA sequencing to investigate the genome-wide transcription profile of HBoV1, including viral mRNA and small RNA transcripts, in HBoV1-infected HAE cells. We identified novel transcription start and termination sites and confirmed the previously identified splicing events. Importantly, an additional proximal polyadenylation site (pA)p2 and a new distal polyadenylation site (pA)dREH lying on the right-hand hairpin (REH) of the HBoV1 genome were identified in processing viral pre-mRNA. Of note, all viral nonstructural proteins-encoding mRNA transcripts use both the proximal polyadenylation sites [(pA)p1 and (pA)p2] and distal polyadenylation sites [(pA)d1 and (pA)dREH] for termination. However, capsid proteins-encoding transcripts only use the distal polyadenylation sites. While the (pA)p1 and (pA)p2 sites were utilized at roughly equal efficiency for proximal polyadenylation of HBoV1 mRNA transcripts, the (pA)d1 site was more preferred for distal polyadenylation. Additionally, small RNA-seq analysis confirmed there is only one viral noncoding RNA (BocaSR) transcribed from nt 5199–5340 of the HBoV1 genome. Thus, our study provides a systematic and unbiased transcription profile, including both mRNA and small RNA transcripts, of HBoV1 in HBoV1-infected HAE-ALI cultures. [ABSTRACT FROM AUTHOR]

Diabetes nephropathy (DN) is the leading cause of end-stage renal disease (ESRD) worldwide, and podocyte injury is the central contributor to the progression of DN. Despite the emerging evidence that has established the importance of podocyte endoplasmic reticulum (ER) stress in the pathogenesis of DN, abnormal protein O-GlcNAcylation is also augmented. Currently, the mechanism associating these two hyperglycemia-induced disorders remains poorly understood. This study intended to elucidate whether ER stress drives hyper-protein O-GlcNAcylation to cause podocyte injury in DN. We used both type 1 and type 2 DN models to confirm the occurrence of ER stress and excessive protein O-GlcNAcylation, and then podocyte purification was also conducted for further investigation. Nephroseq V5 data were mined and in vitro studies were applied to reveal the involvement of ER stress and hyper-O-GlcNAcylation in podocyte injury. Our results indicated that ER stress was induced in both type 1 and type 2 DN, and the human RNA-seq data from Nephroseq V5 showed that O-GlcNAcylation-related genes were significantly upregulated in the DN patients. We further demonstrated that ER stress occurred prior to hyper-O-GlcNAc modification and that pharmacologically inhibited protein O-GlcNAcylation can help decrease the podocyte apoptosis induced by hyperglycemia. Together, these discoveries will aid in uncovering the activation of the ER stress–O-GlcNAcylation axis in podocyte injury under DN, which will help open up new therapeutic approaches for preventing DN progression. [ABSTRACT FROM AUTHOR]

Asperulosidic acid is a bioactive iridoid isolated from Hedyotis diffusa Willd. with anti-inflammatory and renal protective effects. However, its mechanism on renal interstitial fibrosis has not been elucidated yet. The present study aims to explore whether asperulosidic acid could retard renal fibrosis by reducing the circulating indoxyl sulfate (IS), which is a uremic toxin and accelerates chronic kidney disease progression by inducing renal fibrosis. In this paper, a unilateral ureteral obstruction (UUO) model of Balb/C mice was established. After the mice were orally administered with asperulosidic acid (14 and 28 mg/kg) for two weeks, blood, liver and kidney were collected for biochemical, histological, qPCR and Western blot analyses. Asperulosidic acid administration markedly reduced the serum IS level and significantly alleviated the histological changes in glomerular sclerosis and renal interstitial fibrosis. It is noteworthy that the mRNA and protein levels of the organic anion transporter 1 (OAT1), OAT3 and hepatocyte nuclear factor 1α (HNF1α) in the kidney were significantly increased, while the mRNA expressions of cytochrome P450 2e1 (Cyp2e1) and sulfotransferase 1a1 (Sult1a1) in the liver were not altered after asperulosidic acid administration. These results reveal that asperulosidic acid could accelerate the renal excretion of IS by up-regulating OATs via HNF1α in UUO mice, thereby alleviating renal fibrosis, but did not significantly affect its production in the liver, which might provide important information for the development of asperulosidic acid. [ABSTRACT FROM AUTHOR]

Simple Summary: Eutrophication and global warming have caused acute hypoxia in aquatic ecosystems. However, Propsilocerus akamusi depends on great hypoxia tolerance to become a dominant species in eutrophic lakes, but the mechanism of this hypoxia tolerance is unclear. Thus, we combined physiological indicators and histomorphology observations with metabolome–transcriptome analysis to explore the mechanism comprehensively. The results showed that hypoxia tolerance mainly relies on apoptosis, energy metabolism, and an antioxidant mechanism. P. akamusi derives its energy from glycogen metabolism, lipid metabolism, protein digestion and absorption, and the glyoxydate cycle. Lactate is the end product of glycogen degradation, and HIF-1 plays an important role in promoting glycogenolysis in acute hypoxic conditions. However, ethanol probably originates from symbiodinium and, together with hydrogen peroxide, stimulates the elevation of catalase (CAT) activity and induced apoptosis. Understanding the processes that enable P. akamusi to survive lengthy periods of hypoxia in eutrophic lakes might provide a scientific reference for assessing toxicity and favoring policies to reduce their impact on the environment. Plenty of freshwater species, especially macroinvertebrates that are essential to the provision of numerous ecosystem functions, encounter higher mortality due to acute hypoxia. However, within the family Chironomidae, a wide range of tolerance to hypoxia/anoxia is displayed. Propsilocerus akamusi depends on this great tolerance to become a dominant species in eutrophic lakes. To further understand how P. akamusi responds to acute hypoxic stress, we used multi-omics analysis in combination with histomorphological characteristics and physiological indicators. Thus, we set up two groups—a control group (DO 8.4 mg/L) and a hypoxic group (DO 0.39 mg/L)—to evaluate enzyme activity and the transcriptome, metabolome, and histomorphological characteristics. With blue–black chromatin, cell tightness, cell membrane invagination, and the production of apoptotic vesicles, tissue cells displayed typical apoptotic features in the hypoxic group. Although lactate dehydrogenase (LDH), alcohol dehydrogenase (ADH), catalase (CAT), and Na+/K+ -ATPase (NKA) activities were dramatically enhanced under hypoxic stress, glycogen content, and superoxide dismutase (SOD) activities were significantly reduced compared to the control group. The combined analysis of the transcriptome and metabolome, which further demonstrated, in addition to carbohydrates, including glycogen, the involvement of energy metabolism pathways, including fatty acid, protein, trehalose, and glyoxylate cycles, provided additional support for the aforementioned findings. Lactate is the end product of glycogen degradation, and HIF-1 plays an important role in promoting glycogenolysis in acute hypoxic conditions. However, we discovered that the ethanol tested under hypoxic stress likely originates from the symbiodinium of P. akamusi. These results imply that some parameters related to energy metabolism, antioxidant enzyme activities, and histomorphological features may be used as biomarkers of eutrophic lakes in Chironomus riparius larvae. The study also provides a scientific reference for assessing toxicity and favoring policies to reduce their impact on the environment. [ABSTRACT FROM AUTHOR]

We used an in vitro model of the human brain immune microenvironment to simulate hypoxic-ischemic brain injury (HIBI) and treatment with human umbilical cord mesenchymal stem cells (hUMSCs) to address the transformation barriers of gene differences between animals and humans in preclinical research. A co-culture system, termed hNAME, consisted of human hippocampal neurons (N), astrocytes (A), microglia (M), and brain microvascular endothelial cells (E). Flow cytometry measured the apoptosis rates of neurons and endothelial cells. hNAME-neurons and endothelial cells experienced more severe damage than monolayer cells, particularly after 48 h and 24 h of reoxygenation (OGD48/R24). Western blotting identified neuroinflammatory response markers, including HIF-1α, C1q, C3, TNF-α, and iNOS. Inflammatory factors originated from the glial chamber rather than the neurons and vascular endothelial chambers. A gradual increase in the release of inflammatory factors was observed as the OGD and reoxygenation times increased, peaking at OGD48/R24. The hNAME value was confirmed in human umbilical cord mesenchymal stem cells (hUMSCs). Treatment with hUMSCs resulted in a notable decrease in the severity of neuronal and endothelial cell damage in hNAME. The hNAME is an ideal in vitro model for simulating the immune microenvironment of the human brain because of the interactions between neurons, vessels, astrocytes, and microglia. [ABSTRACT FROM AUTHOR]

The alkylation of benzene with methanol can effectively generate high-value-added toluene and xylene out of surplus benzene, which is now achieved primarily using solid acids like H-ZSM-5 zeolites as catalysts. In this work, two H-ZSM-5 samples with distinct framework aluminum (AlF) distributions, but otherwise quite similar textural and acidic properties, have been prepared by employing tetrapropylammonium hydroxide (TPAOH) and n-butylamine (NBA) as organic structure-directing agents (OSDAs). Systematical investigations demonstrate that AlF is preferentially located at the intersections in MFI topology when TPAOH is adopted. In contrast, less AlF is positioned therein as NBA is utilized. Density functional theory (DFT) calculations reveal that the transition-state complexes cannot be formed in the straight and sinusoidal channels due to their much smaller sizes than the dynamic diameters of transition states, whereas there are adequate spaces for the formation of transition states at the intersections. Benefitting from abundant AlF at the intersections, which provides more acid sites therein, H-ZSM-5 synthesized from TPAOH is more active relative to the counterpart obtained from NBA. At a WHSV of 4 h−1 and 400 °C, the former catalyst gives a 52.8% conversion, while the latter one affords a 45.9% conversion. Both catalysts display close total selectivity towards toluene and xylene (ca. 84%). This study provides an efficient way to regulate the distribution of acid sites, thereby enhancing the catalytic performance of H-ZSM-5 zeolite in the titled reaction. [ABSTRACT FROM AUTHOR]

A novel fluorine-containing water-repellent agent (OFAE-SA-BA) was designed and synthesized by emulsion copolymerization, which was used to replace the commercial long fluorocarbon chain water-repellent agent. To improve water repellency, the intermediate and monomer containing two short fluoroalkyl chains were successfully synthesized and characterized by 1H NMR, 13C NMR and FT-IR, respectively. After being treated by the water-repellent agent, the surface chemical composition, molecular weight, thermal stability, surface morphology, wetting behavior, and durability of the modified cotton fabrics were characterized using X-ray photoelectron spectrophotometry (XPS), gel permeation chromatography (GPC), thermal degradation (TG), scanning electron microscopy (SEM), and video-based contact angle goniometry, respectively. The cotton fabric demonstrated water contact angle of 154.1°, both the water and oil repellency rating were grade 4. The durability of water repellency of the treated fabrics only decreased slightly after 30 times, which represented very good washing durability. The finishing agent did not affect the whiteness of the fabric. [ABSTRACT FROM AUTHOR]

Background: Few studies have explored the correlation between asthma medication and features on HRCT images. We aim to analyse the differences and temporal changes of lung function and airway resistance in asthma with diverse HRCT phenotypes in a short period after inhalation of budesonide/formoterol. Method: This observational study recruited 55 adult patients with varying severities of asthma. We performed detailed airway metrics measurements of chest CT scans, such as airway wall thickness (WT), wall area percentage (WA%), wall thickness percentage (T/OR), and airways with an inner perimeter of 10 mm (Pi10). The effect of lung structural features on asthma medication response was explored according to the WA% and T/OR twelve hours post-drug administration. Using multivariable regression models, we then assessed the influence of WA% on lung function. Results: WA% (p < 0.001) and T/OR (p < 0.001) significantly increased in asthma than in healthy control subjects. Compared to mild asthma, airway walls were further thickened (WA%, p = 0.023; T/OR: p = 0.029) and associated with lumen narrowing (Pi10, p = 0.055) in moderate to severe asthma. WA% and T/OR correlated well with lung function (FEV1, FVC, MMEF, and PEF) and airway resistance (R5, R20, Rp, and Fres). Regression analysis showed that MEF25 decreased with increasing age and WA% (R2 = 0.58, p < 0.001). Patients with thickened airway walls experienced a maximal increase in FVC, FEV1, and PEF at 2 h (p < 0.001) and a maximal decrease of R5, Z5, and Rp at 2 h (p < 0.001) in those with a thickened airway pattern. Conclusions: Asthma patients with different bronchial wall thicknesses exhibited variable lung function changes. Specifically, patients with thick airway wall patterns were more sensitive to inhaled budesonide in the short term. [ABSTRACT FROM AUTHOR]

Simple Summary: FLASH radiotherapy is a treatment technique of interest that involves radiation delivered at ultra-high dose rates >100 times faster than traditional radiation therapy, which has been shown to spare radiation damage to normal tissue but maintain tumor control capabilities. Proton therapy uses spread-out proton Bragg peaks to reduce radiation dose to normal tissue by directing the highest dose of radiation to the tumor volume. In this study, irradiation of the whole abdomen of mice was performed with proton beams at FLASH dose rates in order to investigate the normal tissue sparing capabilities of the spread-out Bragg peak compared to the entrance region of the proton depth dose curve. Ultra-high dose rate FLASH proton radiotherapy (F-PRT) has been shown to reduce normal tissue toxicity compared to standard dose rate proton radiotherapy (S-PRT) in experiments using the entrance portion of the proton depth dose profile, while proton therapy uses a spread-out Bragg peak (SOBP) with unknown effects on FLASH toxicity sparing. To investigate, the biological effects of F-PRT using an SOBP and the entrance region were compared to S-PRT in mouse intestine. In this study, 8–10-week-old C57BL/6J mice underwent 15 Gy (absorbed dose) whole abdomen irradiation in four groups: (1) SOBP F-PRT, (2) SOBP S-PRT, (3) entrance F-PRT, and (4) entrance S-PRT. Mice were injected with EdU 3.5 days after irradiation, and jejunum segments were harvested and preserved. EdU-positive proliferating cells and regenerated intestinal crypts were quantified. The SOBP had a modulation (width) of 2.5 cm from the proximal to distal 90%. Dose rates with a SOBP for F-PRT or S-PRT were 108.2 ± 8.3 Gy/s or 0.82 ± 0.14 Gy/s, respectively. In the entrance region, dose rates were 107.1 ± 15.2 Gy/s and 0.83 ± 0.19 Gy/s, respectively. Both entrance and SOBP F-PRT preserved a significantly higher number of EdU + /crypt cells and percentage of regenerated crypts compared to S-PRT. Moreover, tumor growth studies showed no difference between SOBP and entrance for either of the treatment modalities. [ABSTRACT FROM AUTHOR]

Background: Radiotherapy treatment planning is increasingly automated and knowledge-based planning has been shown to match and sometimes improve upon manual clinical plans, with increased consistency and efficiency. In this study, we benchmarked a novel prototype knowledge-based intensity-modulated proton therapy (IMPT) planning solution, against three international proton centers. Methods: A model library was constructed, comprising 50 head and neck cancer (HNC) manual IMPT plans from a single center. Three external-centers each provided seven manual benchmark IMPT plans. A knowledge-based plan (KBP) using a standard beam arrangement for each patient was compared with the benchmark plan on the basis of planning target volume (PTV) coverage and homogeneity and mean organ-at-risk (OAR) dose. Results: PTV coverage and homogeneity of KBPs and benchmark plans were comparable. KBP mean OAR dose was lower in 32/54, 45/48 and 38/53 OARs from center-A, -B and -C, with 23/32, 38/45 and 23/38 being >2 Gy improvements, respectively. In isolated cases the standard beam arrangement or an OAR not being included in the model or being contoured differently, led to higher individual KBP OAR doses. Generating a KBP typically required <10 min. Conclusions: A knowledge-based IMPT planning solution using a single-center model could efficiently generate plans of comparable quality to manual HNC IMPT plans from centers with differing planning aims. Occasional higher KBP OAR doses highlight the need for beam angle optimization and manual review of KBPs. The solution furthermore demonstrated the potential for robust optimization. [ABSTRACT FROM AUTHOR]

Dopant-segregated source/drain contacts in a p-channel Schottky-barrier metal-oxide semiconductor field-effect transistor (SB-MOSFET) require further hole Schottky barrier height (SBH) regulation toward sub-0.1 eV levels to improve their competitiveness with conventional field-effect transistors. Because of the solubility limits of dopants in silicon, the requirements for effective hole SBH reduction with dopant segregation cannot be satisfied using mono-implantation. In this study, we demonstrate a potential solution for further SBH tuning by implementing the dual implantation of boron (B) and aluminum (Al) in combination with microwave annealing (MWA). By using such a method, not only has the lowest hole SBH ever with 0.07 eV in NiSi/n-Si contacts been realized, but also the annealing duration of MWA was sharply reduced to 60 s. Moreover, we investigated the SBH tuning mechanisms of the dual-implanted diodes with microwave annealing, including the dopant segregation, activation effect, and dual-barrier tuning effect of Al. With the selection of appropriate implantation conditions, the dual implantation of B and Al combined with the MWA technique shows promise for the fabrication of future p-channel SB-MOSFETs with a lower thermal budget. [ABSTRACT FROM AUTHOR]