Search

The aspect of resonant vibrations due to pedestrian movement is of great significance in engineering practice. Therefore, understanding the variations in the natural frequency of bridge structures under varying positions of additional mass is of particular interest. This paper presents a procedure for the straightforward determination of the natural frequencies of a beam pedestrian bridge for various positions of pedestrians or a service vehicle based on derived analytical solutions. The calculation takes into account the inertial effects of the additional load mass, modeled as either uniformly distributed or concentrated. The importance of additional load mass effects on the fundamental frequency of a beam pedestrian bridge and its dynamic response to a moving pedestrian load is demonstrated on a bridge example. The proposed solutions are also applicable to other girder system structures with uniform mass and stiffness along their span. [ABSTRACT FROM AUTHOR]

The issue of the cut-off splicing of an additional fiber-reinforced polymer (FRP) bar in the near-surface mounted (NSM) technique for reinforced concrete (RC) beam strengthening exposed dominantly to bending is insufficiently investigated. A possible solution of this issue is a new proposed technique: a double-strap joint. It implies the widening of the groove at the cut-off location and the symmetrical installing of additional supplements of FRP reinforcement. In this research, beam strength has been determined for the following cases: additional NSM FRP reinforcement without a cut-off, with a cut-off, and without overlapping, and with different lengths of splice overlapping. A nonlinear analysis based on the finite element method (FEM) has been applied. The length of the cut-off splice of the additional FRP reinforcement with glass fibers (GFRP) was 20Ø, 40Ø, and 60Ø. The validation of the numerical model and a comparison of the results were conducted by using the authors' experiments. It has been shown that, in the case of a cut-off of NSM GFRP bars, a significant loss in strengthening efficiency occurs, and that, with an increase in the overlapping length, this loss decreases. An overlapping length of 60Ø provides full strengthening. An efficiency assessment was carried out via the use of a parametric study, varying the FRP bar material type and its diameter for a constant splicing length. [ABSTRACT FROM AUTHOR]

Featured Application: The proposed semi-analytical solution is proved as reliable for determining the force–displacement relation of the vertical components of the innovative steel seismic energy dissipation device described in the paper, and also for any engineering problem involving behavior of non-prismatic cantilever beams with a circular cross-section under bending. A solution for the elastoplastic deflection of cantilever beams with linearly variable circular cross-section loaded by shear force at the free end, which is suitable for practical use, has not yet been developed. A semi-analytical solution for such a problem is proposed in this paper. The solution involves beams made of homogenous and isotropic materials with bilinear elastoplastic strain hardening behavior. The Bernoulli–Euler formula is used for determining the elastic deflection. However, for the plastic domain of material behavior, the differential equation of beam bending does not have a solution in closed form. Therefore, an incremental procedure for determining the curvature of the plastified region of the beam is suggested. Deflection of the cantilever beam is calculated via integration of the approximated function of the beam curvature. The proposed semi-analytical solution is validated using experimental results of the seismic energy dissipation device components which have been selected as a sample of a real engineering system. Also, validation is done via finite element analysis of six different cantilever beam models with varying geometric and material characteristics. A satisfying agreement between the proposed semi-analytical results and the subsequent experimental and numerical results is herein achieved, confirming its reliability. [ABSTRACT FROM AUTHOR]

Strengthening of concrete structures is applied as a solution for various deterioration problems in civil engineering practice. This also refers to the structures made of self-compacting concrete (SCC), which is increasingly in use, but there is a lack of research in this field. This paper presents an experimental analysis of flexural behavior of reinforced concrete (RC) continuous beams made of SCC, strengthened with fiber reinforced polymer (FRP) materials (glass (GFRP) and carbon (CFRP) bars, CFRP laminates), by the use of near surface mounted (NSM) and externally bonded (EB) methods. Six two-span continuous beams of a total length of 3200 mm, with the span between supports of 1500 mm and 120/200 mm cross section, were subjected to short-term load and tested. The displacements of beams and the strains in concrete, steel reinforcement, FRP bars and tapes were recorded until failure under a monotonically increasing load. The ultimate load capacities of the strengthened beams were enhanced by 22% to 82% compared to the unstrengthened control beam. The ductility of beams strengthened with GFRP bars was satisfactory, while the ductility of beams strengthened with CFRP bars and tapes was very small, so the failure modes of these beams were brittle. [ABSTRACT FROM AUTHOR]

Self-compacting concrete (SCC) is a type of concrete that is placed in the formwork under its own weight. Although there are many studies showing the behavior of SCC beams, most relate to the behavior of simple supported beams. Unlike those, this is a study of continuous beams made of SCC aimed to analyze their flexural performance as well as to confirm the possibility of using nonlinear finite element analysis (FEA) in the design of such structural elements. An experimental study of three two-span continuous beams of a total length of 3400 mm, with the span between supports of 1600 mm, with 150/200 mm cross section made of SCC exposed to short-term loading, was carried out. The parameter that varied is the percentage of tensile reinforcement, with values of 0.65, 0.86 and 0.94 being selected. As all analyzed beams have shown a satisfactory load-bearing capacity and stiffness, the research confirmed the possibility of using SCC in continuous beams in civil engineering practice. Using Abaqus/Standard software, a nonlinear numerical model is proposed, which is validated and verified against experimental research, as there is only a 5% difference in the numerically calculated ultimate load compared to the experimentally measured values. [ABSTRACT FROM AUTHOR]