Search

By reacting nitrilium derivative of the closo-dodecaborate anion, Bu4N[B12H11N≡CR] (where R = Me, Et, nPr, iPr, p-tolyl), with lithium aluminum hydride (LiAlH4), N-alkylammonium derivatives of the closo-dodecaborate anion, and Bu4N[B12H11NH2CH2R], were obtained. The reduction reaction procedure was optimized, achieving yields close to quantitative (90–95%). The structure of the compound Bu4N[B12H11NH2CH2CH3] was determined using X-ray structural analysis. It was found that substituting lithium aluminum hydride (LiAlH4) with sodium borohydride (NaBH4) leads to the same products but only upon heating, while the reaction with LiAlH4 proceeds at room temperature. [ABSTRACT FROM AUTHOR]

In this work, we studied lead(II) and cobalt(II) complexation of derivatives [2-B10H9O(CH2)2O(CH2)2N3]2− and [2-B10H9O(CH2)5N3]2− of the closo-decaborate anion containing pendant azido groups in the presence of 1,10-phenanthroline and 2,2′-bipyridyl. Mononuclear [PbL2{An}] and binuclear [Pb2L4(NO3)2{An}] lead complexes (where {An} is the N3-substituted boron cluster) were isolated and studied by IR spectroscopy and elemental analysis. The mononuclear lead(II) complex [Pb(phen)2[B10H9O(CH2)2O(CH2)2N3] and the binuclear lead(II) complex [Pb2(phen)4(NO3)2[B10H9O(CH2)5)N3] were determined by single-crystal X-ray diffraction. In complex [Pb2(phen)4(NO3)2[B10H9O(CH2)5)N3], the boron cluster is coordinated by the metal atom only via the 3c2e MHB bonds. In complex [Pb(phen)2[B10H9O(CH2)2O(CH2)2N3], the coordination environment of the metal includes BH groups of the boron cluster and the oxygen atom of the exo-polyhedral substituent. When the reaction was performed in a CH3CN/water mixture, the binuclear lead(II) complex [(Pb(bipy)NO3)(Pb(bipy)2NO3)(B10H9O(CH2)2O(CH2)2N3)]·CH3CN·H2O was isolated, where the boron cluster acts as a bridging ligand between lead atoms coordinated by the boron cage via the O atoms of the substituent and/or the BH groups. In the course of cobalt(II) complexation, the starting compound (Ph4P)2[B10H9O(CH2)5N3] was isolated and its structure was also determined by X-ray diffraction. Although a number of lead(II) complexes with coordinated N3 are known from the literature, no complexes with the boron cluster coordinated by the pendant N3 group involved in the metal coordination have been isolated. [ABSTRACT FROM AUTHOR]

The functionalization of copolyfluorenes containing dicyanophenanthrene units by closo-decaborate anion is described. Target copolyfluorenes were analyzed using SEM, UV-vis, luminescence, NMR, and Fourier-transform infrared (FTIR) spectroscopy. The effect of complexation with the closo-decaborate anion on the photophysical properties was studied both experimentally and theoretically. The PL data indicate an efficient charge transfer from fluorene to the dicyanophenanthrene units coordinated to the closo-decaborate. The coordination of closo-decaborate clusters to the nitrile groups of copolyfluorenes provides an important route to new materials for sensors and light-emitting devices while, at the same time, serving as a platform for further study of the nature of boron clusters. [ABSTRACT FROM AUTHOR]

A theoretical modelling of the interaction process between a protonated complex of carboxonium derivative [2,6-B10H8O2CCH3*Hfac]0 and acetonitrile molecule CH3CN was carried out. As a result of the process, a trisubstituted [B10H7O2CCH3(NCCH3)]0 derivative was formed. This reaction has an electrophile-induced nucleophilic substitution (EINS) mechanism. The main intermediates and transition states of the substitution process were established. As in the case of all previously investigated EINS processes, the key intermediate was an anion with a dihydrogen H2 fragment attached to one boron atom (B(H2) structure motif). The process of nucleophilic substitution can proceed on a different position of the cluster cage. The main potential pathways were assessed. It was established that substitution on the B4 position of the cluster cage was the most energetically favourable, and the [2,4,6-B10H7O2CCH3(NCCH3)]0 isomer was formed. [ABSTRACT FROM AUTHOR]

A comprehensive study focused on the preparation of disubstituted carboxonium derivatives of closo-decaborate anion [2,6-B10H8O2CC6H5]− was carried out. The proposed synthesis of the target product was based on the interaction between the anion [B10H11]− and benzoic acid C6H5COOH. It was shown that the formation of this product proceeds stepwise through the formation of a mono-substituted product [B10H9OC(OH)C6H5]−. In addition, an alternative one-step approach for obtaining the target derivative is postulated. The structure of tetrabutylammonium salts of carboxonium derivative ((C4H9)4N)[2,6-B10H8O2CC6H5] was established with the help of X-ray structure analysis. The reaction pathway for the formation of [2,6-B10H8O2CC6H5]− was investigated with the help of density functional theory (DFT) calculations. This process has an electrophile induced nucleophilic substitution (EINS) mechanism, and intermediate anionic species play a key role. Such intermediates have a structure in which one boron atom coordinates two hydrogen atoms. The regioselectivity for the process of formation for the 2,6-isomer was also proved by theoretical calculations. Generally, in the experimental part, the simple and available approach for producing disubstituted carboxonium derivative was introduced, and the mechanism of this process was investigated with the help of theoretical calculations. The proposed approach can be applicable for the preparation of a wide range of disubstituted derivatives of closo-borate anions. [ABSTRACT FROM AUTHOR]

The preparation of novel nitrilium derivatives of closo-dodecaborate anion [B12H11NCR]−, R = n-C3H7, i-C3H7, 4-C6H4CH3, 1-C10H7 is described. Target compounds were obtained in good yields (up to 73%). The synthesis of target borylated nitrilium derivatives was characterised by the simplicity of the chemical apparatus and the absence of the necessity for the purification of desired compounds. The crystal structures of previously obtained [B12H11NCCH3]− and novel [B12H11NCC3H7]− were established with the help of X-ray structure analysis. DFT-analysis of several nitrilium derivatives [B12H11NCR]−, R = CH3, C3H7, 4-CH3C6H4 was carried out. The main peculiarities of the C≡N bond of the exo-polyhedral substituent were revealed in terms of bond lengths, bond orders and atomic charges. The LUMO orbitals of the systems considered were examined for understanding of the electrophilic nature of the nitrilium derivatives of the closo-dodecaborate anion. [ABSTRACT FROM AUTHOR]

A theoretical investigation of mono-methyl derivatives of closo-borate anions of the general form [BnHnCH3]2– (n = 6, 10, 12) and monocarboranes [HCBnHnCH3]− (n = 5, 9, 11) was carried out. An analysis of the main bonding descriptors of exo-polyhedral B–C bonds was performed using the QTAIM (quantum theory of "Atoms in Molecules"), ELF (electron localisation function), NBOs (natural bond orbitals) analyses and several other approaches for the estimation of B–C bond orders (viz. Laplacian bond order (LBO), fuzzy bond order (FBO) and Mayer and Wiberg formalisms). Based on the data obtained on electron density descriptors, it can be concluded that orbital interaction increases with increasing boron cluster size. The present investigation provides a better understanding of exo-polyhedral B–C bond phenomena in boron cluster systems. The data obtained can be used to estimate B–C bond strength, which can be useful for studies devoted to the synthesis and properties of boron cluster systems. [ABSTRACT FROM AUTHOR]

A new series of compounds based on perbrominated disubstituted sulfonium derivatives of the closo-decaborate anion (n-Bu4N)[2-B10Br9SR2] (R = n-Pr, i-Pr, n-Bu, n-C8H17, n-C12H25, n-C18H37) was obtained, characterised by modern physicochemical methods of analysis. According to the results of an X-ray diffraction study, some of the anions and solvate molecules were disordered. The cations (n-Bu4N)+ and anions [2-B10Br9SR2]− were associated via C-H...Br and H...H contacts. In addition, Br...Br interactions between anions were revealed. The role of these contacts was analysed in terms of Hirshfeld surface analysis, QTAIM theory and the NCI method using quantum chemical calculations. An increase in the size of the alkyl R moiety led to significant strengthening of the total energy of H...H interactions. In the case of R = -n-C18H37, a parallel mutual orientation of alkyl moieties was established that was similar to the packing of salts of fatty acids. The nature of C-H...Br and Br...Br interionic interactions was found to be attractive, in contrast to the repulsive nature of intermolecular Br...Br interactions. [ABSTRACT FROM AUTHOR]

Boron neutron capture therapy (BNCT) has been recognized as a very promising approach for cancer treatment. In the case of osteosarcoma, boron-containing scaffolds can be a powerful tool to combine boron delivery to the tumor cells and the repair of postoperative bone defects. Here we describe the fabrication and characterization of novel biodegradable polymer composites as films and 3D-printed matrices based on aliphatic polyesters containing closo-borates (CB) for BNCT. Different approaches to the fabrication of composites have been applied, and the mechanical properties of these composites, kinetics of their degradation, and the release of closo-borate have been studied. The most complex scaffold was a 3D-printed poly(ε-caprolactone) matrix filled with CB-containing alginate/gelatin hydrogel to enhance biocompatibility. The results obtained allowed us to confirm the high potential of the developed composite materials for application in BNCT and bone tissue regeneration. [ABSTRACT FROM AUTHOR]

The process of protonation of [2,6-B10H8O2CCH3]− was investigated both theoretically and experimentally. The most suitable conditions for protonation of the derivative [2,6-B10H8O2CCH3]− were found. The process of protonation was carried out in the presence of an excess of trifluoromethanesulfonic acid CF3SO3H at room temperature in dichloromethane solution. The structure of the resulting complex [2,6-B10H8O2CCH3*Hfac]0 was established using NMR data and the results of DFT calculations. An additional proton atom Hfac was found to be localized on one of the facets that was opposite the boron atom in a substituted position, and which bonded mainly with one apical boron atom. The main descriptors of the B-Hfac bond were established theoretically using QTAIM and NBO approaches. In addition, the mechanism of [2,6-B10H8O2CCH3]− protonation was investigated. [ABSTRACT FROM AUTHOR]

As a result of our study on the interaction between the octahydrotriborate anion with nucleophiles (Nu = THF, Ph3P, Ph2P-(CH2)2-PPh2 (dppe), Ph3As, Et3N, PhNH2, C5H5N, CH3CN, Ph2CHCN)) in the presence of a wide range of Lewis acids (Ti(IV), Hf(IV), Zr(IV), Al, Cu(I), Zn, Mn(II), Co(II) halides and iodine), a number of substituted derivatives of the octahydrotriborate anion [B3H7Nu] are obtained. It is found that the use of TiCl4, AlCl3, ZrCl4, HfCl4, CuCl and iodine leads to the highest product yields. In this case, it is most likely that the reaction proceeds through the formation of an intermediate [B3H7-HMXnx], which was detected by NMR spectroscopy. The structures of [Ph3P·B3H7] and [PhNH2·B3H7] were determined by X-ray diffraction. [ABSTRACT FROM AUTHOR]

In the present work, a convenient and straightforward approach to the preparation of borylated amidines based on the closo-dodecaborate anion [B12H11NCCH3NHR]−, R=H, Alk, Ar was developed. This method has two stages. A nitrile derivative of the general form [B12H11NCCH3]− was obtained, using a modified technique, in the first stage. On the second stage the resulting molecular system interacted with primary amines to form the target amidine products. This approach is characterised by a simple chemical apparatus, mild conditions and high yields of the final products. The mechanism of the addition of amine to the nitrile derivative of the closo-dodecaborate anion was studied, using quantum-chemical methods. The interaction between NH3 and [B12H11NCCH3]− ammonia was chosen as an example. It was found that the structure of the transition state determines the stereo-selectivity of the process. A study of the biological properties of borylated amidine sodium salts indicated that the substances had low toxicity and could accumulate in cancer cells in significant amounts. [ABSTRACT FROM AUTHOR]

The interaction of hafnium(IV) salts (oxide-dichloride, chloride, and bromide) with nitrilotriacetic acid (NTA), diethylenetriamminepentaacetic acid (DTPA), 1,2-diaminocyclohexanetetraacetic acid (CDTA), 1,3-dipropylmino-2-hydroxy N,N,N′,N′-tetraacetic acid (dpta), and N-(2-hydroxyethyl)ethylenediamine triacetic acid (HEDTA) has been studied. The corresponding complexes Na2[Hf(NTA)2]·3H2O (1), Na[HfDTPA]·3H2O (2), [HfCDTA(H2O)2] (3), and Na[Hf2(dpta)2]·7.5H2O·0.5C2H5OH (4) have been isolated and characterized and their structures have been determined by single crystal X-ray diffraction. Biological studies of [HfCDTA(H2O)2] have shown that in 5% glucose solution this complex has low toxicity and good contrasting ability. [ABSTRACT FROM AUTHOR]

This study has focused on the structure, bonding, and reactivity analysis of closo-borate anions [BnHn]2− (n = 5–12). Several descriptors of B–H interactions have been calculated. It has been found that the values of electron density and total energy at bond critical point are the most useful descriptors for investigation of B–H interactions. Using results from the descriptor analysis, one may conclude that orbital interactions in [BnHn]2− increase with increasing the boron cluster size. Several approaches to estimate atomic charges have been applied. Boron atoms in apical positions have more negative values of atomic charges as compared with atoms from equatorial positions. The mean values of boron and hydrogen atomic charges tend to be more positive with the increasing of boron cluster size. Global and local reactivity descriptors using conceptual density functional theory (DFT) theory have been calculated. Based on this theory, the closo-borate anions [BnHn]2− (n = 5–9) can be considered strong and moderate electrophiles, while the closo-borate anions [BnHn]2− (n = 10–12) can be considered marginal electrophiles. Fukui functions for electrophilic attack have been calculated. Fukui functions correlate well with atomic charges of the closo-borate anions. Boron atoms in apical positions have the most positive values of Fukui functions. [ABSTRACT FROM AUTHOR]

This work is devoted to the search for new antiherpes simplex virus type 1 (HSV-1) drugs among synthetic tetrapyrroles and to an investigation of their antiviral properties under nonphotodynamic conditions. In this study, novel amphiphilic 5,10,15,20-tetrakis(4-(3-pyridyl-n-propanoyl)oxyphenyl)porphyrin tetrabromide (3a), 5,10,15,20-tetrakis(4-(6-pyridyl-n-hexanoyl)oxyphenyl)porphyrin tetrabromide (3b) and known 5,10,15,20-tetrakis(1-methyl-4-pyridinio)porphyrin tetraiodide (TMePyP) were synthesized, and their dark antiviral activity in vitro against HSV-1 was studied. The influence of porphyrin's nanosized delivery vehicles based on Pluronic F127 on anti-HSV-1 activity was estimated. All the received compounds 3a, 3b and TMePyP showed virucidal efficiency and had an effect on viral replication stages. The new compound 3b showed the highest antiviral activity, close to 100%, with the lowest concentration, while the maximum TMePyP activity was observed with a high concentration; porphyrin 3a was the least active. The inclusion of the synthesized compounds in Pluronic F-127 polymeric micelles had a noticeable effect on antiviral activity only at higher porphyrin concentrations. Action of the received compounds differs by influence on the early or later reproduction stages. While 3a and TMePyP acted on all stages of the viral replication cycle, porphyrin 3b inhibited viral replication during the early stages of infection. The resulting compounds are promising for the development of utilitarian antiviral agents and, possibly, medical antiviral drugs. [ABSTRACT FROM AUTHOR]

The novel members of the 1,2-diboraoxazoles family have been obtained. In the present work, we have carried out the intramolecular ring-closure reaction of borylated iminols of general type [B10H9N=C(OH)R]− (R = Me, Et, nPr, iPr, tBu, Ph, 4-Cl-Ph). This process is conducted in mild conditions with 83–87% yields. The solid-state structures of two salts of 1,2-diboraoxazoles were additionally investigated by X-ray crystallography. In addition, the phenomena of bonding interactions in the 1,2-diboraoxazole cycles have been theoretically studied by the Quantum Theory of Atoms in Molecules analysis. Several local and integral topological properties of the electron density involved in these interactions have been computed. [ABSTRACT FROM AUTHOR]

A comprehensive study focused on the preparation of disubstituted carboxonium derivatives of closo -decaborate anion [2,6-B 10 H 8 O 2 CC 6 H 5 ] - was carried out. The proposed synthesis of the target product was based on the interaction between the anion [B 10 H 11 ] - and benzoic acid C 6 H 5 COOH. It was shown that the formation of this product proceeds stepwise through the formation of a mono-substituted product [B 10 H 9 OC(OH)C 6 H 5 ] - . In addition, an alternative one-step approach for obtaining the target derivative is postulated. The structure of tetrabutylammonium salts of carboxonium derivative ((C 4 H 9 ) 4 N)[2,6-B 10 H 8 O 2 CC 6 H 5 ] was established with the help of X-ray structure analysis. The reaction pathway for the formation of [2,6-B 10 H 8 O 2 CC 6 H 5 ] - was investigated with the help of density functional theory (DFT) calculations. This process has an electrophile induced nucleophilic substitution (EINS) mechanism, and intermediate anionic species play a key role. Such intermediates have a structure in which one boron atom coordinates two hydrogen atoms. The regioselectivity for the process of formation for the 2,6-isomer was also proved by theoretical calculations. Generally, in the experimental part, the simple and available approach for producing disubstituted carboxonium derivative was introduced, and the mechanism of this process was investigated with the help of theoretical calculations. The proposed approach can be applicable for the preparation of a wide range of disubstituted derivatives of closo -borate anions.

The process of protonation of [2,6-B 10 H 8 O 2 CCH 3 ] - was investigated both theoretically and experimentally. The most suitable conditions for protonation of the derivative [2,6-B 10 H 8 O 2 CCH 3 ] - were found. The process of protonation was carried out in the presence of an excess of trifluoromethanesulfonic acid CF 3 SO 3 H at room temperature in dichloromethane solution. The structure of the resulting complex [2,6-B 10 H 8 O 2 CCH 3 *H fac ] 0 was established using NMR data and the results of DFT calculations. An additional proton atom H fac was found to be localized on one of the facets that was opposite the boron atom in a substituted position, and which bonded mainly with one apical boron atom. The main descriptors of the B-H fac bond were established theoretically using QTAIM and NBO approaches. In addition, the mechanism of [2,6-B 10 H 8 O 2 CCH 3 ] - protonation was investigated.

As a result of our study on the interaction between the octahydrotriborate anion with nucleophiles (Nu = THF, Ph 3 P, Ph 2 P-(CH 2 ) 2 -PPh 2 (dppe), Ph 3 As, Et 3 N, PhNH 2 , C 5 H 5 N, CH 3 CN, Ph 2 CHCN)) in the presence of a wide range of Lewis acids (Ti(IV), Hf(IV), Zr(IV), Al, Cu(I), Zn, Mn(II), Co(II) halides and iodine), a number of substituted derivatives of the octahydrotriborate anion [B 3 H 7 Nu] are obtained. It is found that the use of TiCl 4 , AlCl 3 , ZrCl 4 , HfCl 4 , CuCl and iodine leads to the highest product yields. In this case, it is most likely that the reaction proceeds through the formation of an intermediate [B 3 H 7 -HMXn x ], which was detected by NMR spectroscopy. The structures of [Ph 3 P·B 3 H 7 ] and [PhNH 2 ·B 3 H 7 ] were determined by X-ray diffraction.

In the present work, a convenient and straightforward approach to the preparation of borylated amidines based on the closo -dodecaborate anion [B 12 H 11 NCCH 3 NHR]-, R=H, Alk, Ar was developed. This method has two stages. A nitrile derivative of the general form [B 12 H 11 NCCH 3 ] - was obtained, using a modified technique, in the first stage. On the second stage the resulting molecular system interacted with primary amines to form the target amidine products. This approach is characterised by a simple chemical apparatus, mild conditions and high yields of the final products. The mechanism of the addition of amine to the nitrile derivative of the closo -dodecaborate anion was studied, using quantum-chemical methods. The interaction between NH 3 and [B 12 H 11 NCCH 3 ] - ammonia was chosen as an example. It was found that the structure of the transition state determines the stereo-selectivity of the process. A study of the biological properties of borylated amidine sodium salts indicated that the substances had low toxicity and could accumulate in cancer cells in significant amounts.