Search

Molybdenum disulfide (MoS2), a typical layered material, has important applications in various fields, such as optoelectronics, catalysis, electronic devices, sensors, and supercapacitors. Extensive research has been carried out on few-layered MoS2 in the field of electrochemistry due to its large specific surface area, abundant active sites and short electron transport path. However, the preparation of few-layered MoS2 is a significant challenge. This work presents a simple one-pot hydrothermal method for synthesizing few-layered MoS2. Furthermore, it investigates the exfoliation effect of different amounts of sodium borohydride (NaBH4) as a stripping agent on the layer number of MoS2. Na+ ions, as alkali metal ions, can intercalate between layers to achieve the purpose of exfoliating MoS2. Additionally, NaBH4 exhibits reducibility, which can effectively promote the formation of the metallic phase of MoS2. Few-layered MoS2, as an electrode for supercapacitor, possesses a wide potential window of 0.9 V, and a high specific capacitance of 150 F g−1 at 1 A g−1. This work provides a facile method to prepare few-layered two-dimensional materials for high electrochemical performance. [ABSTRACT FROM AUTHOR]

Ionic electroactive polymer (iEAP) actuators are recognized as exceptional candidates for artificial muscle development, with significant potential applications in bionic robotics, space exploration, and biomedical fields. Here, we developed a new iEAP actuator utilizing high-purity single-walled carbon nanotubes (SWCNTs)-reinforced poly(3, 4-ethylenedioxythiophene)/poly(4-styrenesulfonate) (PEDOT: PSS, PP) hybrid electrodes and a Nafion/EMIBF4 ion-exchange membrane via a straightforward and efficient spray printing technique. The SWCNT/PP actuator exhibits significantly enhanced electric conductivity (262.9 S/cm) and specific capacitance (22.5 mF/cm2), benefitting from the synergistic effect between SWCNTs and PP. These improvements far surpass those observed in activated carbon aerogel bucky-gel-electrode-based actuators. Furthermore, we evaluated the electroactive behaviors of the SWCNT/PP actuator under alternating square-wave voltages (1–3 V) and frequencies (0.01–100 Hz). The results reveal a substantial bending displacement of 6.44 mm and a high bending strain of 0.61% (at 3 V, 0.1 Hz), along with a long operating stability of up to 10,000 cycles (at 2 V, 1 Hz). This study introduces a straightforward and efficient spray printing technique for the successful preparation of iEAP actuators with superior electrochemical and electromechanical properties as intended, which hold promise as artificial muscles in the field of bionic robotics. [ABSTRACT FROM AUTHOR]

Ti3C2Tx MXene, as a common two-dimensional material, has a wide range of applications in electrochemical energy storage. However, the surface forces of few-layer or monolayer Ti3C2Tx MXene lead to easy agglomeration, which hinders the demonstration of its performance due to the characteristics of layered materials. Herein, we report a facile method for preparing monolayer Ti3C2Tx MXene on nickel foam to achieve a self-supporting structure for supercapacitor electrodes under high electrostatic fields. Moreover, the specific capacitance varies with the deposition of different-concentration monolayer Ti3C2Tx MXene on nickel foam. As a result, Ti3C2Tx/NF has a high specific capacitance of 319 mF cm−2 at 2 mA cm−2 and an excellent long-term cycling stability of 94.4% after 7000 cycles. It was observed that the areal specific capacitance increases, whereas the mass specific capacitance decreases with the increasing loading mass. Attributable to the effect of the high electrostatic field, the self-supporting structure of the Ti3C2Tx/NF becomes denser as the concentration of the monolayer Ti3C2Tx MXene ink increases, ultimately affecting its electrochemical performance. This work provides a simple way to overcome the agglomeration problem of few-layer or monolayer MXene, then form a self-supporting electrode exhibiting excellent electrochemical performance. [ABSTRACT FROM AUTHOR]

Polar coding and sparse code multiple access (SCMA) are key technologies for 5G mobile communication, the joint design of them has a great significance to improve the overall performance of the transmitter-receiver symmetric wireless communication system. In this paper, we firstly propose a pruning iterative joint detection and decoding algorithm (PI-JDD) based on the confidence stability of resource nodes. Branches to be updated are dynamically pruned to avoid redundant iterative, which is able to reduce 24~50% complexity while achieving the approximate error performance of traditional serial joint iterative detection and decoding algorithm S-JIDD. Then, to further reduce the bit error rate (BER) of the receiver, a cyclic redundancy check (CRC) termination mechanism is added at the end of each joint iteration to avoid the convergence error caused by decoding deviation. Simulation results show that the addition of an early stopping criterion can achieve a remarkable performance gain compared with the S-JIDD algorithm. More importantly, the combined algorithm of the two proposed schemes can reduce the computational complexity while achieving better error performance. [ABSTRACT FROM AUTHOR]

Strain-hardening cementitious composite (SHCC) has the obvious advantages of excellent material properties such as its high tensile and compressive strengths, high tensile strain capacity, and excellent durability against multi-cracking performance with very fine crack widths. In particular, the multi-cracking performance of SHCC during structural utilization is obviously reduced compared to that of SHCC in uniaxial tension tests using dumbbell-shaped specimens of small size. The corresponding tensile strain capacity of SHCC during structural utilization is, thus, significantly decreased compared to that of SHCC in uniaxial tension tests. However, the reduction in the ductility of SHCC during structural utilization has not been sufficiently understood, and further study is required. This paper presents an experimental investigation into the ductility variation of flexural-failed and shear-failed SHCC members as well as the ductility improvement of SHCC members with steel reinforcement compared with that of SHCC in uniaxial tension tests using small-sized specimens. This study focuses on not only the decrease in the crack elongation performance of the SHCC material during structural utilization but also the increase in the crack elongation performance of SHCC members with steel reinforcement. The results demonstrate that the crack elongation performance of flexural-failed and shear-failed SHCC members is significantly reduced compared to that of SHCC in the uniaxial tension tests. Moreover, it was confirmed that steel reinforcement can effectively improve the SHCC member, increasing the strain-hardening capacity and multi-cracking performance. The load-carrying capacity of the flexural-failed SHCC member with steel reinforcement seemed to increase linearly with an increase in the reinforcement ratio, accompanied by an increase in the distribution of multiple fine cracks in the flexural-failed SHCC member with steel reinforcement. [ABSTRACT FROM AUTHOR]

Single-layer tunnel lining using shotcrete has the significant advantages of reducing the tunnel excavation volume and saving construction materials, which has been gradually applied in tunnel construction. The high-performance concretes are generally adopted in single-layer tunnel lining for enhancing the bearing capacity of the tunnel lining, whereas the single-layer tunnel lining may still induce damages due to the adverse conditions such as shallow buried depth of the tunnel, and further study related to its application condition is thus required. This paper presents a study of the single-layer tunnel lining with shotcrete employed for supporting the large-span tunnel, in which the reinforcement ribs are also adopted in the single-layer lining for improving the lining stiffness and strength. The study is implemented using numerical simulation, focusing on the safety and performance variation of the single-layer tunnel lining influenced from the varied lining thicknesses and shallow buried depths of the tunnel. The results shows that the single-layer tunnel lining has the obvious advantage of toughness in significantly absorbing large deformation of surrounding rocks and improving the ability to resist lining cracking. The results also demonstrate that the single-layer tunnel lining with shotcrete and reinforcement ribs can safely support the large-span tunnel, in which the stability and safety of the large-span tunnel are confirmed from both the tunnel deformation and lining stresses. Moreover, the factors related to both the lining thickness and shallow buried depth of the tunnel have great influence on the single-layer tunnel lining with shotcrete and reinforcement ribs, in which the insufficient lining thickness and excessive shallow buried depth of the tunnel can induce the damages of the single-layer tunnel lining due to shotcrete stresses exceeding its strength. This study provides some references of employing the single-layer tunnel lining with shotcrete and reinforcement ribs for supporting large-span tunnel. [ABSTRACT FROM AUTHOR]

Strain-hardening cementitious composites (SHCC) are an attractive construction material with obvious advantages of large strain capacity and high strength, as well as excellent workability and easy processing using conventional equipment. Moreover, SHCC can be designed with varied mix proportions in order to satisfy various requirements and expectations to overcome the shortages of existing construction materials. However, the behavior of SHCC in the structural application is varied from that of SHCC material, which is reviewed and presented in this paper, focusing on the flexural and shear behavior of the SHCC member and the SHCC layer used for strengthening reinforced concrete (RC). The reviewed results demonstrate that both the zero-span tensile behavior of the stress concentration and the uniaxial tensile behavior of the bending effect can influence the crack propagation patterns of multiple fine cracks in the SHCC strengthening layer, in which the crack distribution within the SHCC layer is limited near the existing crack in the RC substrate member in the zero-span tensile behavior. Moreover, the crack propagation patterns of the SHCC strengthening layer are changed with varied layer thicknesses, and the SHCC strengthening layer, even with a small thickness, can significantly increase the shear load carrying capacity of the shear strengthened RC member. This work provides the foundations for promoting SHCC material in the structural application of repairing or retrofitting concrete structures. [ABSTRACT FROM AUTHOR]

The development of low-cost electrode materials with enhanced activity and favorable durability for hydrogen evolution reactions (HERs) is a great challenge. MoS2 is an effective electrocatalyst with a unique layered structure. In addition, aluminosilica shells can not only provide more hydroxyl groups but also improve the durability of the catalyst as a protective shell. Herein, we have designed a hard-template route to synthesize porous yolk–shell MoS2@void@Aluminosilica microspheres in a NaAlO2 solution. The alkaline solution can directly etch silica (SiO2) hard templates on the surface of MoS2 microspheres and form a porous aluminosilica outer shell. The electrocatalytic results confirm that the MoS2@void@Aluminosilica microspheres exhibit higher electrocatalytic activity for HERs with lower overpotential (104 mV at the current density of −10 mA cm−2) and greater stability than MoS2 microspheres. The superior electrocatalytic activity of MoS2@void@Aluminosilica microspheres is attributed to the unique structure of the yolk@void@shell geometric construction, the protection of the aluminosilica shell, and the greater number of active sites offered by their nanosheet subunits. The design of a unique structure and new protection strategy may set up a new method for preparing other excellent HER electrocatalytic materials. [ABSTRACT FROM AUTHOR]

This paper investigates the energy-efficient communications and user capacity in the cognitive multiple input multiple output (MIMO) symmetric system of underlay mode. The advantage of the improved energy efficiency provided by the orthogonal slot allocation for time division multiple access (TDMA) has a side effect of restricting the number of users accessing the system. To tackle the above problem, this paper proposes a nonorthogonal time resource allocation method with sparse code multiple access (SCMA), which allows one to convert the orthogonal slot units of TDMA into non-orthogonal shared slot units for multiple secondary users (SUs). The method of adding virtual users is adopted, wherein each SU is treated as multiple SUs who occupy a shared unit, to facilitate the packet access. Finally, the greedy algorithm is applied to optimize the time slot allocation of unoccupied shared slot units. The simulation results show that SCMA-based nonorthogonal slot allocation can reduce not only the energy consumption by nearly 40%, but also the average power interference from SUs to primary users by nearly 2 dB if their number is relatively high. Moreover, in the case of satisfying the rate requirement of the users, the system user capacity increased by more than 50%. [ABSTRACT FROM AUTHOR]

With the aim of profitable conversion of carbon dioxide (CO2) in an efficient, economical, and sustainable manner, we developed a CuBr/ionic liquid (1-butyl-3-methylimidazolium acetate) catalytic system that could efficiently catalyze the three-component reactions of propargylic alcohols, 2-aminoethanols, and CO2 to produce 2-oxazolidinones and α-hydroxy ketones. Remarkably, this catalytic system employed lower metal loading (0.0125–0.5 mol%) but exhibited the highest turnover number (2960) ever reported, demonstrating its excellent activity and sustainability. Moreover, our catalytic system could efficiently work under 1 atm of CO2 pressure and recycle among the metal-catalyzed systems. [ABSTRACT FROM AUTHOR]