Search

In salt lake areas, the cast-in-situ concrete structure has been corroded by the combination of sulfate and chloride for a long time. The incorporation of basalt fiber materials into concrete helps to improve the durability of concrete. In this paper, experiments were conducted to study the corrosion deterioration mechanisms of basalt fiber-reinforced cast-in-situ concrete under sulfate, chloride, and combined attack. The appearance, size, mass, flexural, and compressive strength of specimens were investigated during the immersion period to determine the changes in the physical and mechanical properties of specimens. Moreover, the microstructure and mineral changes of specimens during the immersion period were observed by Scanning Electron Microscope (SEM), Energy Dispersive Spectrometer (EDS), X-ray diffraction (XRD), and Thermogravimetric (TG)/ Derivative Thermogravimetric (DTG) analyses. Results show that premixed chloride has a significant detrimental influence on the strength development of cast-in-situ concrete, with concrete powder spalling occurring on the surface of the specimen. Severe corrosion degradation of specimens occurs under the external sulfate and internal chloride combined attack, resulting in lower flexural and compressive strength. The compressive strength and flexural strength of the corroded specimens decreased by 15.4% and 24.8%, respectively, compared with the control group at 28 days. Moreover, premixed basalt fiber has a beneficial influence on cast-in-situ concrete. When the basalt fiber content is 0.5%, the flexural strength of the specimen is increased by 16.2%. The filling and bridging effect of basalt fiber alleviates the negative effects caused by corrosion. In addition, increasing fiber content is beneficial for enhancing its effectiveness when the fiber content is less than 0.5%. This paper provides a valuable reference for the application of basalt fiber-reinforced cast-in-situ concrete under the condition of sulfate-chloride compound corrosion.

Superoxide dismutase (SOD) is a class of enzymes that catalyze the disproportionation of superoxide anion radicals into hydrogen peroxide and oxygen. It can remove excessive free radicals in organisms and acts as a potent antioxidant, cleaning free radicals generated by radiation and protecting cells from oxidative damage. In this study, we obtained a MnSOD gene from the radiation-resistant bacterium Radiobacillus sp. (RsSOD) and constructed its recombinant expression vector through gene synthesis. The recombinant RsSOD protein was efficiently expressed using IPTG induction, and purified via repeated freezing and thawing, heating, and DEAE anion-exchange chromatography. The purified RsSOD exhibited an enzyme activity of 2072.5 U/mg. Furthermore, RsSOD was demonstrated to have robust resistance to high temperatures, acid, alkali, and artificial intestinal fluid. Further studies were performed to investigate the radiation resistance of RsSOD against ultraviolet (UV) irradiation in human corneal epithelial (HCE-T) cells. The results indicated that a low concentration of RsSOD (6.25 U/mL) could promote HCE-T cell proliferation and protect these cells from damage caused by both long-term and short-term UV exposure, effectively reducing apoptosis induced by short-term UV irradiation. These findings suggest that the RsSOD protein possesses significant anti-UV irradiation property and is expected to be a candidate for treating ocular radiation-related diseases.

Existing optimization research on the crankshaft heat treatment process is mostly based on one-sided considerations, and less consideration is given to the matching of multiple process parameters, leading to irrational designs of heat treatment. To address this problem, this work investigates the influence mechanisms of cooling speed, tempering temperature, and holding time on the performance evaluation indexes of the straightness, residual stress, and martensite content of a crankshaft based on the response surface method. The results showed that the order of influence of these three different process parameters on the performance evaluation index was cooling speed > holding time > tempering temperature, and the order of influence on the performance evaluation indexes under multifactorial process parameters was cooling speed-holding time > cooling speed-tempering temperature > holding time-tempering temperature. The optimal process parameters were a cooling speed of 1.4 times the cooling oil, a tempering temperature of 555 °C, and a holding time of 6 h, with the straightness of the crankshaft reduced by 9.9%, the surface stress increased by 6.7%, and the martensitic content increased by 7.2% after the process optimization. This work can provide new clues for optimizing the heat treatment process parameters of crankshafts.

The effect of the addition of alkali earth element Ca on the microstructure and mechanical properties of extruded AZ91-0.4Ce-xCa (x = 0, 0.4, 0.8, 1.2 wt.%) alloys was studied by using scanning electron microscopy, transmission electron microscopy, and tensile tests. The results showed that the addition of Ca could significantly refine the second phase and grain size of the extruded AZ91-0.4Ce alloy. The refinement effect was most obvious when 0.8 wt.% of Ca was added, and the recrystallized grain size was 4.75 μm after extrusion. The addition of Ca resulted in the formation of a spherical Al 2 Ca phase, which effectively suppressed the precipitation of the β-Mg 17 Al 12 phase, promoted dynamic recrystallization and grain refinement, impeded dislocation motion, and exerted a positive influence on the mechanical properties of the alloy. The yield strength (YS), ultimate tensile strength (UTS), and elongation (EL) of the AZ91-0.4Ce-0.8Ca alloy were 238.7 MPa, 338.3 MPa, and 10.8%, respectively.

Two bis-cyclometalated heteroleptic iridium complexes incorporating 1-phenylisoquinoline (piq) as the main cyclometalating ligand and 3-hydroxy-2-methyl-4-pyrone (ma) or 2-ethyl-3-hydroxy-4H-pyran-4-one (ema) as the auxiliary ligand, namely Ir(piq) 2 (ma) (Ir-1) and Ir(piq) 2 (ema) (Ir-2), were developed and applied as deep-red phosphors in organic light-emitting diodes (OLEDs). The two auxiliary ligands had similar influences on the photophysical, electrochemical, and electroluminescent properties of the iridium complexes. Ir(piq) 2 (ma) (Ir-1) showed better luminescence performance in a simple phosphorescent OLED compared to the traditional red iridium complex Ir(piq) 2 (acac) and exhibited a current efficiency of 9.39 cd A -1 (EQE of 12.09%). In contrast, Ir(piq) 2 (ema) exhibited an efficiency of 8.6 cd A -1 (EQE of 10.19%).

MCrAlY (M = Ni and/or Co) metallic coatings are essential for the protection of hot-end components against thermal and corrosion damage. Increasing the Al content is considered a feasible solution to improve the high-temperature performance of MCrAlY coatings. In this paper, the effects of high Al contents (12-20 wt.%) on the phase constituents and cast microstructures in MCrAlY alloys were studied by high-energy X-ray diffraction and electron microscopy techniques combined with phase equilibria calculations. High Al content improved the stability of β, σ, and α phases. Meanwhile, an evolution of the cast microstructure morphology from a dendrite structure to an equiaxed grain structure was observed. The thermal properties were analyzed, which were closely related to the phase constituents and solid-to-solid phase transitions at evaluated temperatures. This work is instructive for developing high-Al-content MCrAlY coatings for next-generation thermal barrier applications.

Control of the porous structure and particle size is essential for improving the properties of polysilsesquioxane (PSQ) microspheres. Herein, using the strategy combining inverse suspension polymerization, two-step sol-gel- and polymerization-induced phase separation processes, micron-sized thiol-containing macroporous PSQ (TMPSQ) microspheres with controllable morphologies, adjustable particle diameters (4.9-17.3 μm), and pore sizes (40-3774 nm) were prepared. The morphology and size of the TMPSQ microspheres were characterized by SEM. The mercury intrusion method was employed to analyze the porous structure of the microspheres. The effects of the composition of the sol-gel disperse phase, the mass ratio of the sol-gel disperse phase to the oil continuous phase (WR W/O ), and the Span 80 mass content in the oil continuous phase on the morphology, particle diameter and pore size of the TMPSQ microspheres were investigated. Results indicated that the composition of the sol-gel disperse phase determines the morphology and porous structure of the microspheres, and WR W/O and Span 80 content have remarkable impacts on the morphology and particle size of the microspheres. This study is beneficial to the design and fabrication of functional PSQ microspheres with desired properties and promising application prospects.

The recovery of valuable gold from wastewater is of great interest because of the widespread use of the precious metal in various fields and the pollution generated by gold-containing wastes in water. In this paper, a water-insoluble cross-linked adsorbent material (TE) based on cyanuric chloride (TCT) and ethylenediamine (EDA) was designed and used for the adsorption of Au(III) from wastewater. It was found that TE showed extremely high selectivity (D = 49,213.46) and adsorption capacity (256.19 mg/g) for Au(III) under acidic conditions. The adsorption rate remained above 90% eVen after five adsorption-desorption cycles. The adsorption process followed the pseudo-first-order kinetic model and the Freundlich isotherm model, suggesting that physical adsorption with a multilayer molecular overlay dominates. Meanwhile, the adsorption mechanism was obtained by DFT calculation and XPS analysis, and the adsorption mechanism was mainly the electrostatic interaction and electron transfer between the protonated N atoms in the adsorbent (TE) and AuCl 4 - , which resulted in the redox reaction. The whole adsorption process was the result of the simultaneous action of physical and chemical adsorption. In conclusion, the adsorbent material TE shows great potential for gold adsorption and recovery.

In response to the numerous challenges faced by traditional human pose recognition methods in practical applications, such as dense targets, severe edge occlusion, limited application scenarios, complex backgrounds, and poor recognition accuracy when targets are occluded, this paper proposes a YOLO-Pose algorithm for human pose estimation. The specific improvements are divided into four parts. Firstly, in the Backbone section of the YOLO-Pose model, lightweight GhostNet modules are introduced to reduce the model's parameter count and computational requirements, making it suitable for deployment on unmanned aerial vehicles (UAVs). Secondly, the ACmix attention mechanism is integrated into the Neck section to improve detection speed during object judgment and localization. Furthermore, in the Head section, key points are optimized using coordinate attention mechanisms, significantly enhancing key point localization accuracy. Lastly, the paper improves the loss function and confidence function to enhance the model's robustness. Experimental results demonstrate that the improved model achieves a 95.58% improvement in mAP50 and a 69.54% improvement in mAP50-95 compared to the original model, with a reduction of 14.6 M parameters. The model achieves a detection speed of 19.9 ms per image, optimized by 30% and 39.5% compared to the original model. Comparisons with other algorithms such as Faster R-CNN, SSD, YOLOv4, and YOLOv7 demonstrate varying degrees of performance improvement.

The recovery of Au(III) from solution using adsorbents in the form of granules or powders is challenging due to issues such as instability during the recovery process or mass loss caused by small particle size. This study introduces a PEI-TCT/PVDF composite membrane designed to intercept and capture Au(III) in wastewater. Experimental results demonstrated that the PEI-TCT/PVDF membrane exhibits a broad pH range (1-8) and a high retention efficiency for Au(III) of 97.8%, with a maximum adsorption capacity of 294.5 mg/g. The mechanism of Au(III) adsorption on the PEI-TCT/PVDF membrane was mainly through electrostatic adsorption, which caused AuCl 4 - to aggregate on the surface of the membrane and gradually reduced to Au 0 and Au + . Furthermore, the membrane can be entirely regenerated within 20 min and maintains its performance in subsequent adsorption cycles. This study highlights the potential of PEI-TCT/PVDF membranes for the recovery of precious Au(III).

We prepared AlGaN/GaN high electron mobility transistors (HEMTs) with GaN cap thicknesses of 0, 1, 3, and 5 nm and compared the material characteristics and device performances. It was found that the surface morphology of the epitaxial layer was effectively improved after the introduction of the GaN cap layer. With the increase of the GaN cap thickness, the carrier concentration (n s ) decreased and the carrier mobility (μ H ) increased. Although the drain saturation current (I dSat ) of the device decreased with the increasing GaN cap thickness, the excessively thin GaN layer was not suitable for the cap layer. The thicker GaN layer not only improved the surface topography of the epitaxial layer but also effectively improved the off-state characteristics of the device. The optimal cap thickness was determined to be 3 nm. With the introduction of the 3 nm GaN cap, the I dSat was not significantly reduced. However, both the off-state gate leakage current (I gLeak ) and the off-state leakage current (I dLeak ) decreased by about two orders of magnitude, and the breakdown voltage (BV) increased by about 70 V.

With the increase of hexavalent Cr(VI) wastewater discharged from industrial production, it seriously pollutes water bodies and poses a risk to human health. Adsorption is used as an effective means to treat Cr(VI), but its effectiveness is affected by pH, and the adsorption performance decreases when acidity is strong. Furthermore, research on the mechanism of Cr(VI) adsorption using DFT calculations needs to be developed. This study focuses on the development of magnetically responsive core-shell nano-ion imprinted materials (Fe 3 O 4 @GO@IIP) through magnetic separation and surface imprinting techniques. Characterization techniques including FT-IR, XRD, and EDS confirmed the core-shell nanostructure of Fe 3 O 4 @GO@IIP. Batch adsorption experiments and model simulations demonstrated the exceptional adsorption capacity of Fe 3 O 4 @GO@IIP for Cr(VI) in strongly acidic solutions (pH = 1), reaching a maximum of 89.18 mg/g. The adsorption mechanism was elucidated through XPS and DFT calculations, revealing that Fe 3 O 4 @GO@IIP operates through electrostatic interactions and chemical adsorption, with charge transfer dynamics quantified during the process. This research provides new insights for addressing Cr(VI) treatment in highly acidic environments.

The Al-Mn alloy heat exchanger fin production process includes a brazing treatment at s high temperature of 600 °C, in which coarse grains are preferred for their high resistance to deformation at elevated temperatures by decreasing the grain boundary sliding. In this study, Al-1.57Mn-1.57Zn-0.58Si-0.17Fe alloy foils cold rolled by 81.7% (1.1 mm in thickness) and 96.5% (0.21 mm in thickness) were annealed at 100-550 °C for 1 h to investigate their recrystallization behavior, grain sizes, and precipitates by increasing the annealing temperature, using micro-hardness measurement, electron back-scattered diffraction (EBSD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) techniques. The micro-hardness results showed that the recrystallization finishing temperatures for the two samples were almost the same, 323 ± 2 °C. The EBSD results showed that when the annealing temperature decreased from 550 to 400 °C, the recrystallized grain sizes of the two samples were nearly identical-both increased slightly. Further decreasing the annealing temperature from 400 to 330 °C caused the grain sizes to increase more, with the thinner foil sample having a more significant increase. The SEM and TEM observations showed that the micron-sized primary-phase remained unchanged during the annealing process. The nano-sized secondary phase precipitates formed during the hot-rolling process experienced a coarsening and dissolving process upon annealing. The particle size of the secondary phase increased from 32 nm to 44 nm and the area fraction decreased from 4.2% to 3.8%. The nucleation analysis confirmed that the large primary-phase could act as a nucleation site through particle stimulated nucleation (PSN) mode. The relatively dense secondary phase precipitates with small sizes at lower temperatures could provide higher Zener drag to the grain boundaries, leading to fewer nuclei and thereafter coarser grains. The coarsening of the recrystallized grains in the foils could be implemented through thickness reduction and/or precipitation processes to form densely distributed nano-sized precipitates.

Rheumatoid arthritis (RA) is a chronic autoimmune disease that leads to deformities and disabilities in patients. Conventional treatment focuses on delaying progression; therefore, new treatments are necessary. The present study reported a novel ionic liquid transdermal platform for efficient RA treatment, and the underlying mechanism was elucidated using FTIR, 1 H-NMR, Raman, XPS, and molecular simulations. The results showed that the reversibility of the semi-ionic hydrogen bonding facilitated high drug loading and enhanced drug permeability. Actarit's drug loading had an approximately 11.34-times increase. The in vitro permeability of actarit and ketoprofen was improved by 5.46 and 2.39 times, respectively. And they had the same significant effect in vivo. Furthermore, through the integration of network pharmacology, Western blotting (WB), and radiology analyses, the significant osteoprotective effects of SIHDD-PSA (semi-ionic H-bond double-drug pressure-sensitive adhesive transdermal patch) were revealed through the modulation of the JAK-STAT pathway. The SIHDD-PSA significantly reduced paw swelling and inflammation in the rat model, and stimulatory properties evaluation confirmed the safety of SIHDD-PSA. In conclusion, these findings provide a novel approach for the effective treatment of RA, and the semi-ionic hydrogen bonding strategy contributes a new theoretical basis for developing TDDS.

Polysilsesquioxane (PSQ) microspheres have shown promise in many fields, but previous studies about porous PSQ microspheres are scarce. Herein, we fabricated novel micron-sized thiol-functional polysilsesquioxane (TMPSQ) microspheres with open and interconnected macropores by combining inverse suspension polymerization with two-step sol-gel and polymerization-induced phase separation processes, without using phase-separation-promoting additives or sacrificial templates. The chemical composition of the TMPSQ microspheres was confirmed using FTIR and Raman spectroscopy. The morphology of the TMPSQ microspheres was characterized using SEM and TEM. TGA was employed to test the thermal stability of the TMPSQ microspheres. Mercury intrusion porosimetry and nitrogen adsorption-desorption tests were performed to investigate the pore structure of the TMPSQ microspheres. The results showed that the TMPSQ microspheres had open and interconnected macropores with a pore size of 839 nm, and the total porosity and intraparticle porosity reached 70.54% and 43.21%, respectively. The mechanism of porous generation was proposed based on the morphological evolution observed using optical microscopy. The macropores were formed through the following four steps: phase separation (spinodal decomposition), coarsening, gelation, and evaporation of the solvent. The macropores can facilitate the rapid mass transfer between the outer and inner spaces of the TMPSQ microspheres. The TMPSQ microspheres are promising in various fields, such as catalyst supports and adsorbents.

High-efficient separation of (bio)microparticles has important applications in chemical analysis, environmental monitoring, drug screening, and disease diagnosis and treatment. As a label-free and high-precision separation scheme, dielectrophoresis (DEP) has become a research hotspot in microparticle separation, especially for biological cells. When processing cells with DEP, relatively high electric conductivities of suspending media are sometimes required to maintain the biological activities of the biosample, which results in high temperature rises within the system caused by Joule heating. The induced temperature gradient generates a localized alternating current electrothermal (ACET) flow disturbance, which seriously impacts the DEP manipulation of cells. Based on this, we propose a novel design of the (bio)microparticle separator by combining DEP with ACET flow to intensify the separation process. A coupling model that incorporates electric, fluid flow, and temperature fields as well as particle tracking is established to predict (bio)microparticle trajectories within the separator. Numerical simulations reveal that both ACET flow and DEP motion act in the same plane but in different directions to achieve high-precision separation between particles. This work provides new design ideas for solving the very tricky Joule heating interference in the DEP separation process, which paves the way for further improving the throughput of the DEP-based (bio)microparticle separation system.

Brain tumor segmentation using neural networks presents challenges in accurately capturing diverse tumor shapes and sizes while maintaining real-time performance. Additionally, addressing class imbalance is crucial for achieving accurate clinical results. To tackle these issues, this study proposes a novel N-shaped lightweight network that combines multiple feature pyramid paths and U-Net architectures. Furthermore, we ingeniously integrate hybrid attention mechanisms into various locations of depth-wise separable convolution module to improve efficiency, with channel attention found to be the most effective for skip connections in the proposed network. Moreover, we introduce a combination loss function that incorporates a newly designed weighted cross-entropy loss and dice loss to effectively tackle the issue of class imbalance. Extensive experiments are conducted on four publicly available datasets, i.e., UCSF-PDGM, BraTS 2021, BraTS 2019, and MSD Task 01 to evaluate the performance of different methods. The results demonstrate that the proposed network achieves superior segmentation accuracy compared to state-of-the-art methods. The proposed network not only improves the overall segmentation performance but also provides a favorable computational efficiency, making it a promising approach for clinical applications.

(1) Background: Avian influenza has attracted widespread attention because of its severe effect on the poultry industry and potential threat to human health. The H9N2 subtype of avian influenza viruses was the most prevalent in chickens, and there are several commercial vaccines available for the prevention of the H9N2 subtype of avian influenza viruses. However, due to the prompt antigenic drift and antigenic shift of influenza viruses, outbreaks of H9N2 viruses still continuously occur, so surveillance and vaccine updates for H9N2 subtype avian influenza viruses are particularly important. (2) Methods: In this study, we constructed a stable Chinese hamster ovary cell line (CHO) to express the H9 hemagglutinin (HA) protein of the major prevalent H9N2 strain A/chicken/Daye/DY0602/2017 with genetic engineering technology, and then a subunit H9 avian influenza vaccine was prepared using the purified HA protein with a water-in-oil adjuvant. (3) Results: The results showed that the HI antibodies significantly increased after vaccination with the H9 subunit vaccine in specific-pathogen-free (SPF) chickens with a dose-dependent potency of the immunized HA protein, and the 50 μg or more per dose HA protein could provide complete protection against the H9N2 virus challenge. (4) Conclusions: These results indicate that the CHO expression system could be a platform used to develop the subunit vaccine against H9 influenza viruses in chickens.

Adaptive cruise control and autonomous lane-change systems represent pivotal advancements in intelligent vehicle technology. To enhance the operational efficiency of intelligent vehicles in combined lane-change and car-following scenarios, we propose a coordinated decision control model based on hierarchical time series prediction and deep reinforcement learning under the influence of multiple surrounding vehicles. Firstly, we analyze the lane-change behavior and establish boundary conditions for safe lane-change, and divide the lane-change trajectory planning problem into longitudinal velocity planning and lateral trajectory planning. LSTM network is introduced to predict the driving states of surrounding vehicles in multi-step time series, combining D3QN algorithm to make decisions on lane-change behavior. Secondly, based on the following state between the ego vehicle and the leader vehicle in the initial lane, as well as the relationship between the initial distance and the expected distance with the leader vehicle in the target lane, with the primary objective of maximizing driving efficiency, longitudinal velocity is planned based on driving conditions recognition. The lateral trajectory and conditions recognition are then planned using the GA-LSTM-BP algorithm. In contrast to conventional adaptive cruise control systems, the DDPG algorithm serves as the lower-level control model for car-following, enabling continuous velocity control. The proposed model is subsequently simulated and validated using the NGSIM dataset and a lane-change scenarios dataset. The results demonstrate that the algorithm facilitates intelligent vehicle lane-change and car-following coordinated control while ensuring safety and stability during lane-changes. Comparative analysis with other decision control models reveals a notable 17.58% increase in driving velocity, underscoring the algorithm's effectiveness in improving driving efficiency.

Alzheimer's disease (AD) is currently the most common neurodegenerative disease. Glycogen synthase kinase 3β (GSK-3β) is a pivotal factor in AD pathogenesis. Recent research has demonstrated that plant miRNAs exert cross-kingdom regulation on the target genes in animals. Gastrodia elata ( G. elata ) is a valuable traditional Chinese medicine that has significant pharmacological activity against diseases of the central nervous system (CNS). Our previous studies have indicated that G. elata -specific miRNA plays a cross-kingdom regulatory role for the NF- κ B signaling pathway in mice. In this study, further bioinformatics analysis suggested that Gas-miR36-5p targets GSK-3β. Through western blot, RT-qPCR, and assessments of T-AOC, SOD, and MDA levels, Gas-miR36-5p demonstrated its neuroprotective effects in an AD cell model. Furthermore, Gas-miR36-5p was detected in the murine brain tissues. The results of the Morris water maze test and western blot analysis provided positive evidence for reversing the learning deficits and hyperphosphorylation of Tau in AD mice, elucidating significant neuroprotective effects in an AD model following G. elata RNA administration. Our research emphasizes Gas-miR36-5p as a novel G. elata -specific miRNA with neuroprotective properties in Alzheimer's disease by targeting GSK-3β. Consequently, our findings provide valuable insights into the cross-kingdom regulatory mechanisms underlying G. elata -specific miRNA, presenting a novel perspective for the treatment of Alzheimer's disease.

A novel Al-Mg-Si aluminum alloy with the addition of the micro-alloying element Er and Zr that was promptly quenched after extrusion has been studied. The solid solution and aging treatment of the novel alloy are studied by observing the microstructure, mechanical properties, and strengthening mechanism. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) techniques are employed to examine the changes in the microstructure resulting from various solid solution treatments and aging treatments. The best strengthening effect can be achieved when the solubility of the MgSi phase and precipitate β″ (Mg 2 Si phase) is at their maximum. The addition of Er and Zr elements promotes the precipitation of the β″ phase and makes the b″ phase more finely dispersed. The aging strengthening of alloys is a comprehensive effect of the dislocation cutting mechanism and bypass mechanism, the joint effect of diffusion strengthening of Al 3 (Er,Zr) particles and the addition of Er and Zr elements promoting the precipitation strengthening of β″ phases. In this paper, by adding Er and Zr elements and exploring the optimal heat treatment system, the yield strength of the alloy reaches 437 MPa and the tensile strength reaches 453 MPa after solid solution treatment at 565 °C/30 min and aging at 175 °C/10 h.

Tunable fiber lasers have the advantages of good beam quality, high integration, and adjustable output wavelength, and they are widely used in fields such as optical fiber communication and optical fiber sensing. The fiber filter is one of the key components of tunable fiber lasers. Among the various filters currently used, multimode interference filters have the advantages of simple structure, convenient implementation, flexible tuning methods, and convenient spectral range design. The structures of multimode interference filters based on multimode fibers, no-core fibers, multi-core fibers, tapered fibers, and other special fibers are introduced in this paper. The working principles and tuning methods are analyzed and the research progress of tunable fiber lasers based on these filters is summarized. Finally, the development trend of tunable fiber lasers based on multimode interference filters is discussed. The rapid development and applications of multimode interference filters can help improve the performance of continuous and pulse lasers as well as promote the practicality of tunable fiber lasers.

Depression and sleep disturbances are highly prevalent health problems that have been suggested to be associated with vitamin D deficiency. This study investigated whether sleep disturbances affect the association between vitamin D and depressive symptoms. A total of 425 patients with depression were included in this study. Spearman correlation coefficients were chosen to assess the relation between vitamin D concentrations and depressive symptomatology (according to the PHQ-9 and HAMD-17 scores). The GLM Mediation Model in the Medmod module for data analysis in Jamovi 2.2.5 was used to analyze the mediation models for sleep disturbances. Vitamin D concentrations were significantly correlated with PHQ-9 and HAMD-17 scale scores. In addition, item 3 was suggested to have a mediating effect between vitamin D and depressive symptoms in the mediating model of PHQ-9, and item 4 was suggested to have a mediating effect between vitamin D and depressive symptoms in the mediating model of HAMD-17. Sleep disturbances (especially difficulty falling asleep) are mediators between vitamin D and depressive symptoms, suggesting that increasing vitamin D levels at the right time to regulate sleep disturbances may improve depression symptoms, yet further research is necessary.

Designing high-performance materials for the detection or removal of toxic decomposition gases of sulfur hexafluoride is crucial for both environmental monitoring and human health preservation. Based on first-principles calculations, the adsorption performance and gas-sensing properties of unsubstituted phthalocyanine (H 2 Pc) and H 2 Pc doped with 4d transition metal atoms (TM = Tc and Ru) towards five characteristic decomposition components (HF, H 2 S, SO 2 , SOF 2 , and SO 2 F 2 ) were simulated. The findings indicate that both the TcPc and RuPc monolayers are thermodynamically and dynamically stable. The analysis of the adsorption energy indicates that H 2 S, SO 2 , SOF 2 , and SO 2 F 2 underwent chemisorption on the TcPc monolayer. Conversely, the HF molecules were physisorbed through interactions with H atoms. The chemical adsorption of H 2 S, SO 2 , and SOF 2 occurred on the RuPc monolayer, while the physical adsorption of HF and SO 2 F 2 molecules was observed. Moreover, the microcosmic mechanism of the gas-adsorbent interaction was elucidated by analyzing the charge density differences, electron density distributions, Hirshfeld charges, and density of states. The TcPc and RuPc monolayers exhibited excellent sensitivity towards H 2 S, SO 2 , and SOF 2 , as evidenced by the substantial alterations in the band gaps and work functions of the TcPc and RuPc nanosheets. Our calculations hold significant value for exploring the potential chemical sensing applications of TcPc and RuPc monolayers in gas sensing, with a specific focus on detecting sulfur hexafluoride., Competing Interests: The authors declare no conflict of interest.

The nucleation and growth processes of pure Fe/pure Al intermetallic compounds (IMCs) during heat treatment at 380 °C and 520 °C were observed through in situ scanning electron microscopy (SEM). The size of the IMCs were statistically analyzed using image analysis software. The types and distribution of IMCs were characterized using transmission electron microscopy (TEM) and electron backscattering diffraction (EBSD). The results showed that: at 380 °C, the primary phase of the Fe/Al composite intermetallic compounds was Fe 4 Al 13 , formed on the Fe side and habituated with Fe. The IMC was completely transformed from the initial Fe 4 Al 13 to the most stable Fe 2 Al 5 , and the Fe 2 Al 5 was the habitus with Fe during the process of holding at 380 °C for 15 min to 60 min. At 380 °C, the initial growth rate of the IMC was controlled by reaction, and the growth rate of the thickness and horizontal dimensions was basically the same as 0.02-0.17 μm/min. When the IMC layer thickness reached 4.5 μm, the growth rate of the thickness changed from reaction control to diffusion control and decreased to 0.007 μm/min. After heat treatment at 520 °C (≤20 min), the growth of IMC was still controlled by the reaction, the horizontal growth rate was 0.53 μm/min, the thickness growth rate was 0.23 μm/min, and the main phase of the IMC was the Fe 2 Al 5 phase at 520 °C/20 min.

Material innovation plays a very important role in technological progress and industrial development. Traditional experimental exploration and numerical simulation often require considerable time and resources. A new approach is urgently needed to accelerate the discovery and exploration of new materials. Machine learning can greatly reduce computational costs, shorten the development cycle, and improve computational accuracy. It has become one of the most promising research approaches in the process of novel material screening and material property prediction. In recent years, machine learning has been widely used in many fields of research, such as superconductivity, thermoelectrics, photovoltaics, catalysis, and high-entropy alloys. In this review, the basic principles of machine learning are briefly outlined. Several commonly used algorithms in machine learning models and their primary applications are then introduced. The research progress of machine learning in predicting material properties and guiding material synthesis is discussed. Finally, a future outlook on machine learning in the materials science field is presented.

Eriocheir sinensis is traditionally a native high-value crab that is widely distributed in eastern Asia, and the precocity is considered the bottleneck problem affecting the development of the industry. The precocious E. sinensis is defined as a crab that reaches complete sexual maturation during the first year of its lifespan rather than as normally in the second year. However, the exact regulatory mechanisms underlying the precocity are still unclear to date. This study is the first to explore the mechanism of precocity with transcriptome-metabolome association analysis between the precocious and normal sexually mature E. sinensis . Our results indicated that the phenylalanine metabolism (map00360) and neuroactive ligand-receptor interaction (map04080) pathways play an important role in the precocity in the ovary of E. sinensis . In map00360, the predicted aromatic-L-amino-acid decarboxylase and 4-hydroxyphenylpyruvate dioxygenase isoform X1 genes and the phenethylamine, phenylethyl alcohol, trans-2-hydroxycinnamate, and L-tyrosine metabolites were all down-regulated in the ovary of the precocious E. sinensis . The map04080 was the common KEGG pathway in the ovary and hepatopancreas between the precocious and normal crab. In the ovary, the predicted growth hormone secretagogue receptor type 1 gene was up-regulated, and the L-glutamate metabolite was down-regulated in the precocious E. sinensis . In the hepatopancreas, the predicted forkhead box protein I2 gene and taurine metabolite were up-regulated and the the L-glutamate metabolite was down-regulated in the precocious crab. There was no common pathway in the testis. Numerous common pathways in the hepatopancreas between male precocious and normal crab were identified. The specific amino acids, fatty acids and flavorful nucleotide (inosine monophosphate (MP), cytidine MP, adenosine MP, uridine MP, and guanosine MP) contents in the hepatopancreas and gonads further confirmed the above omics results. Our results suggest that the phenylalanine metabolism may affect the ovarian development by changing the contents of the neurotransmitter and tyrosine. The neuroactive ligand-receptor interaction pathway may affect the growth by changing the expressions of related genes and affect the umami taste of the gonads and hepatopancreas through the differences of L-glutamate metabolite in the precocious E. sinensis . The results provided valuable and novel insights on the precocious mechanism and may have a significant impact on the development of the E. sinensis aquaculture industry.

Image dehazing based on convolutional neural networks has achieved significant success; however, there are still some problems, such as incomplete dehazing, color deviation, and loss of detailed information. To address these issues, in this study, we propose a multi-scale dehazing network with dark channel priors (MSDN-DCP). First, we introduce a feature extraction module (FEM), which effectively enhances the ability of feature extraction and correlation through a two-branch residual structure. Second, a feature fusion module (FFM) is devised to combine multi-scale features adaptively at different stages. Finally, we propose a dark channel refinement module (DCRM) that implements the dark channel prior theory to guide the network in learning the features of the hazy region, ultimately refining the feature map that the network extracted. We conduct experiments using the Haze4K dataset, and the achieved results include a peak signal-to-noise ratio of 29.57 dB and a structural similarity of 98.1%. The experimental results show that the MSDN-DCP can achieve superior dehazing compared to other algorithms in terms of objective metrics and visual perception.

The hot deformation behavior of Al-Zn-Mg-Er-Zr alloy was investigated through an isothermal compression experiment at a strain rate ranging from 0.01 to 10 s -1 and temperature ranging from 350 to 500 °C. The constitutive equation of thermal deformation characteristics based on strain was established, and the microstructure (including grain, substructure and dynamic precipitation) under different deformation conditions was analyzed. It is shown that the steady-state flow stress can be described using the hyperbolic sinusoidal constitutive equation with a deformation activation energy of 160.03 kJ/mol. Two kinds of second phases exist in the deformed alloy; one is the η phase, whose size and quantity changes according to the deformation parameters, and the other is spherical Al 3 (Er, Zr) particles with good thermal stability. Both kinds of particles pin the dislocation. However, with a decrease in strain rate or increase in temperature, η phases coarsen and their density decreases, and their dislocation locking ability is weakened. However, the size of Al 3 (Er, Zr) particles does not change with the variation in deformation conditions. So, at higher deformation temperatures, Al 3 (Er, Zr) particles still pin dislocations and thus refine the subgrain and enhance the strength. Compared with the η phase, Al 3 (Er, Zr) particles are superior for dislocation locking during hot deformation. A strain rate ranging from 0.1 to 1 s -1 and a deformation temperature ranging from 450 to 500 °C form the safest hot working domain in the processing map.

Around 11% of all known gene lesions causing human genetic diseases are nonsense mutations that introduce a premature stop codon (PTC) into the protein-coding gene sequence. Drug-induced PTC readthrough is a promising therapeutic strategy for treating hereditary diseases caused by nonsense mutations. To date, it has been found that more than 50 small-molecular compounds can promote PTC readthrough, known as translational readthrough-inducing drugs (TRIDs), and can be divided into two major categories: aminoglycosides and non-aminoglycosides. This review summarizes the pharmacodynamics and clinical application potential of the main TRIDs discovered so far, especially some newly discovered TRIDs in the past decade. The discovery of these TRIDs brings hope for treating nonsense mutations in various genetic diseases. Further research is still needed to deeply understand the mechanism of eukaryotic cell termination and drug-induced PTC readthrough so that patients can achieve the greatest benefit from the various TRID treatments.

Non-muscle-invasive bladder cancer (NMIBC) is a common tumor of the urinary system. Given its high rates of recurrence, progression, and drug resistance, NMIBC seriously affects the quality of life and limits the survival time of patients. Pirarubicin (THP) is a bladder infusion chemotherapy drug recommended by the guidelines for NMIBC. Although the widespread use of THP reduces the recurrence rate of NMIBC, 10-50% of patients still suffer from tumor recurrence, which is closely related to tumor resistance to chemotherapy drugs. This study was performed to screen the critical genes causing THP resistance in bladder cancer cell lines by using the CRISPR/dCas9-SAM system. Thus, AKR1C1 was screened. Results showed that the high expression of AKR1C1 could enhance the drug resistance of bladder cancer to THP both in vivo and in vitro. This gene could reduce the levels of 4-hydroxynonenal and reactive oxygen species (ROS) and resist THP-induced apoptosis. However, AKR1C1 did not affect the proliferation, invasion, or migration of the bladder cancer cells. Aspirin, which is an AKR1C1 inhibitor, could help reduce the drug resistance caused by AKR1C1. After receiving THP treatment, the bladder cancer cell lines could upregulate the expression of the AKR1C1 gene through the ROS/KEAP1/NRF2 pathway, leading to resistance to THP treatment. Using tempol, which is an inhibitor of ROS, could prevent the upregulation of AKR1C1 expression.

Background: There is a high correlation between the risk of major depressive disorder (MDD) and adverse childhood experiences (ACEs) such as adverse parenting (AP). While there appears to be an association between ACEs and changes in brain structure and function, there have yet to be multimodal neuroimaging studies of associations between parenting style and brain developmental changes in MDD patients. To explore the effect of AP on brain structure and function. Methods: In this cross-sectional study, 125 MDD outpatients were included in the study and divided into the AP group and the optimal parenting (OP) group. Participants completed self-rating scales to assess depressive severity, symptoms, and their parents' styles. They also completed magnetic resonance imaging within one week of filling out the instruments. The differences between groups of gender, educational level, and medications were analyzed using the chi-squared test and those of age, duration of illness, and scores on scales using the independent samples t -test. Differences in gray matter volume (GMV) and resting-state functional connectivity (RS-FC) were assessed between groups. Results: AP was associated with a significant increase in GMV in the right superior parietal lobule (SPL) and FC between the right SPL and the bilateral medial superior frontal cortex in MDD patients. Limitations: The cross-cultural characteristics of AP will result in the lack of generalizability of the findings. Conclusions: The results support the hypothesis that AP during childhood may imprint the brain and affect depressive symptoms in adulthood. Parents should pay attention to the parenting style and avoid a style that lacks warmth.

Schizothorax biddulphi is an endemic fish distributed only in southern Xinjiang, China. Due to overfishing, water conservancy facilities, and other factors, as well as inherent biological limitations, resource recovery is quite difficult. For endangered fish with slow growth, late sexual maturity, and insufficient natural population supplementation, large-scale artificial reproduction and breeding are important for restoring resources. Therefore, it is urgent to optimize the reproductive regulation methods of the fish. The kiss1 gene is a key regulator of the reproductive regulation cascade, and identifying and analyzing the role of kiss1 are important for further elucidating the reproductive mechanism of S. biddulphi . To understand the characteristics of the kiss1 of S. biddulphi , the full-length cDNA sequence of kiss1 was obtained in this study, and its tissue expression specificity and association with phenotypic traits were analyzed in male fish. The full-length cDNA sequence of kiss1 in S. biddulphi was 658 bp, with an ORF of 327 bp, and encoded a 108-amino acid, unstable protein. Homology results indicated that kiss1 was highly conserved. qPCR showed kiss1 expression in different tissues in male S. biddulphi , with the highest expression in the gonads, followed by muscle, and significantly lower expression in the swim bladder, pituitary gland, heart, hypothalamus, gill, fin, liver, eye, and mid-kidney. qPCR revealed three SNP loci in the exonic region of kiss1. The c.3G>T locus was significantly correlated ( p < 0.05) with gonad mass and the maturation coefficient in S. biddulphi . These results will help uncover the reproductive endocrinology network of S. biddulphi , improve artificial breeding technology for fish, and unveil new directions for breeding excellent strains of S. biddulphi and molecular marker-assisted breeding.

Point cloud registration is the basis of real-time environment perception for robots using 3D LiDAR and is also the key to robust simultaneous localization and mapping (SLAM) for robots. Because LiDAR point clouds are characterized by local sparseness and motion distortion, the point cloud features of coal mine roadway environments show a weak texture and degradation. Therefore, for these environments, the traditional point cloud registration method to register directly will lead to problems, such as a decline in registration accuracy, z-axis drift, and map ghosting. To solve the above problems, we propose a point cloud registration method based on IMU preintegration with the sensor characteristics of LiDAR and IMU. The system framework of this method mainly consists of four modules: IMU preintegration, point cloud preprocessing, point cloud frame matching and point cloud registration. First, IMU sensor data are introduced, and IMU linear interpolation is used to correct the motion distortion in LiDAR scanning, and the IMU preintegration error function is constructed. Second, the point cloud segmentation is performed using the ground segmentation method of RANSAC to provide additional ground constraints for the z-axis displacement and to remove the unstable flawed points from the point cloud. On this basis, the LiDAR point cloud registration error function is constructed by extracting the feature corner points and feature plane points. Finally, the Gaussian Newton solution is used to optimize the constraint relationship between the LiDAR odometry frames to minimize the error function, complete the LiDAR point cloud registration and better estimate the position and pose of the mobile robot. The experimental results show that compared with the traditional point cloud registration method, the proposed method has a higher point cloud registration accuracy, success rate and computational efficiency. The LiDAR odometry constructed using this method can better reflect the authenticity of the robot trajectory and has higher trajectory accuracy and smaller absolute position and pose error.

In the current study, the interaction of minocycline hydrochloride (MC) and trypsin (TRP) was studied using fluorescence spectroscopy, synchronous fluorescence spectroscopy, three-dimensional fluorescence spectroscopy, UV-Vis spectroscopy, and molecular docking simulation techniques. The results show that the fluorescence quenching of trypsin at different degrees can be caused by minocycline hydrochloride at different temperatures. According to the Stern-Volmer equation, the fluorescence quenching type was static quenching. By calculating critical distance, we concluded that there is a possibility of non-radiative energy transfer between minocycline hydrochloride and trypsin. The effect of minocycline hydrochloride on the secondary structure of trypsin was demonstrated using ultraviolet spectroscopy. Synchronous fluorescence spectroscopy showed that minocycline hydrochloride could bind to tryptophan residues in trypsin, resulting in corresponding changes in the secondary structure of trypsin. Three-dimensional fluorescence spectroscopy showed that minocycline hydrochloride had a particular effect on the microenvironment of trypsin that led to changes in the secondary structure of trypsin. The molecular docking technique demonstrated that the binding of minocycline hydrochloride and trypsin was stable. Circular dichroism showed that the secondary structure of trypsin could be changed by minocycline hydrochloride.

The glucose regulated protein (GRP78) is an important chaperone for various environmental and physiological stimulations. Despite the importance of GRP78 in cell survival and tumor progression, the information regarding GRP78 in silkworm Bombyx mori L. is poorly explored. We previously identified that GRP78 expression was significantly upregulated in the silkworm Nd mutation proteome database. Herein, we characterized the GRP78 protein from silkworm B. mori (hereafter, BmGRP78). The identified BmGRP78 protein encoded a 658 amino acid residues protein with a predicted molecular weight of approximately 73 kDa and comprised of two structural domains, a nucleotide-binding domain (NBD) and a substrate-binding domain (SBD). BmGRP78 was ubiquitously expressed in all examined tissues and developmental stages by quantitative RT-PCR and Western blotting analysis. The purified recombinant BmGRP78 (rBmGRP78) exhibited ATPase activity and could inhibit the aggregating thermolabile model substrates. Heat-induction or Pb/Hg-exposure strongly stimulated the upregulation expression at the translation levels of BmGRP78 in BmN cells, whereas no significant change resulting from BmNPV infection was found. Additionally, heat, Pb, Hg, and BmNPV exposure resulted in the translocation of BmGRP78 into the nucleus. These results lay a foundation for the future identification of the molecular mechanisms related to GRP78 in silkworms.

RNA-binding proteins (RBPs) are key regulators of transcription and translation, with highly dynamic spatio-temporal regulation. They are usually involved in the regulation of RNA splicing, polyadenylation, and mRNA stability and mediate processes such as mRNA localization and translation, thereby affecting the RNA life cycle and causing the production of abnormal protein phenotypes that lead to tumorigenesis and development. Accumulating evidence supports that RBPs play critical roles in vital life processes, such as bladder cancer initiation, progression, metastasis, and drug resistance. Uncovering the regulatory mechanisms of RBPs in bladder cancer is aimed at addressing the occurrence and progression of bladder cancer and finding new therapies for cancer treatment. This article reviews the effects and mechanisms of several RBPs on bladder cancer and summarizes the different types of RBPs involved in the progression of bladder cancer and the potential molecular mechanisms by which they are regulated, with a view to providing information for basic and clinical researchers.

An inflammatory response after an aneurysmal subarachnoid hemorrhage (aSAH) has always been in the spotlight. However, few studies have compared the prognostic impact of inflammatory biomarkers. Moreover, why these inflammatory biomarkers contribute to a poor prognosis is also unclear. We retrospectively reviewed aSAH patients admitted to our institution between January 2015 and December 2020. The 90-day unfavorable functional outcome was defined as a modified Rankin scale (mRS) of ≥ 3. Independent inflammatory biomarker-related risk factors associated with 90-day unfavorable outcomes were derived from a forward stepwise multivariate analysis. Receiver operating characteristic curve analysis was conducted to identify the best cut-off value of inflammatory biomarkers. Then, patients were divided into two groups according to each biomarker's cut-off value. To eliminate the imbalances in baseline characteristics, propensity score matching (PSM) was carried out to assess the impact of each biomarker on in-hospital complications. A total of 543 patients were enrolled in this study and 96 (17.7%) patients had unfavorable 90-day outcomes. A multivariate analysis showed that the white blood cell (WBC) count, the systemic inflammation response index, the neutrophil count, the neutrophil-to-albumin ratio, the monocyte count, and the monocyte-to-lymphocyte ratio were independently associated with 90-day unfavorable outcomes. The WBC count showed the best predictive ability (area under the curve (AUC) = 0.710, 95% CI = 0.652-0.769, p < 0.001). After PSM, almost all abnormal levels of inflammatory biomarkers were associated with a higher incidence of pneumonia during hospitalization. The WBC count had the strongest association with poor outcomes. Similar to nearly all other inflammatory biomarkers, the cause of poor prognosis may be the higher incidence of in-hospital pneumonia.

To provide carbon steel a long-term corrosion protection effect in NaCl solutions with different pH values, based on poly-acrylamide ( PAM ) and oleate imidazoline ( OIM ), a solid corrosion inhibitor with the properties of pH-controlled release was synthesized. SEM, FTIR and TGA results indicated that the OIM inhibitors were successfully loaded into PAM hydrogel with a high OIM encapsulation content (39.64 wt.%). The OIM release behavior from the hydrogel structure has two stages, quick release and sustained release. The pH of solutions could affect the initial release kinetics of OIM inhibitors and the diffusion path in the hydrogel structure. Weight loss measurement of L80 steel in different pH solutions with OIM@PAM proved the inhibitor responsive release mechanism and anticorrosion performance. The inhibition efficiency of OIM@PAM can maintain over 80% after long-term immersion in a harsh corrosive environment (pH 3), which is much higher than the inhibition efficiency of OIM@PAM in a moderate corrosive solution.

The hot compression experiment of homogenized Al-5.2Mg-0.6Mn-0.29Zn-0.16Er-0.12Zr alloy was carried out by the Gleeble-3500 thermal simulation testing system. The deformation behavior in temperatures of 350~500 ℃ and deformation rates of 0.01~10 s -1 was studied. The relationship between stress and strain rate and deformation temperature was analyzed. The constitutive equation of alloy high-temperature deformation was constructed by the Zener-Hollomon method, and the hot working diagram with the true strain of 0.2 and 0.5 was constructed according to the dynamic material model. The research results show that flow stress has a positive correlation with strain rate and a negative correlation with temperature. The steady flow stress during deformation can be described by a hyperbolic sinusoidal constitutive equation. Adding Er and Zr into Al-Mg alloy can not only refine grains and strengthen precipitation but also form a core-shell Al 3 (Er, Zr) phase. In the deformation process, Al 3 (Er, Zr) precipitates can pin dislocations and inhibit dynamic recrystallization (DRX). Dynamic recovery (DRV) is dominant during hot deformation. The mechanism of dynamic recovery is dislocation motion. At high temperatures, Al 3 (Er, Zr) can also inhibit grain coarsening. The average hot deformation activation energy of the alloy is 203.7 kJ/mol. This high activation energy can be due to the pinning effect of Er and Zr precipitates. The processing map of the alloy was analyzed and combined with the observation of microstructure, the hot deformation instability zone of the alloy was determined, and the suitable process parameters for hot deformation were obtained, which were 450~480 °C, and the strain rate is 0.01~0.09 s -1 .

Bladder cancer remains one of the most common malignant tumors that threatens human health worldwide. It imposes a heavy burden on patients and society due to the high medical costs associated with its easy metastasis and recurrence. Although several treatment options for bladder cancer are available, their clinical efficacy remains unsatisfactory. Therefore, actively exploring new drugs and their mechanisms of action for the clinical treatment of bladder cancer is very important. Scabertopin is one of the major sesquiterpene lactones found in Elephantopus scaber L. Sesquiterpene lactones are thought to have fairly strong anti-cancer efficacy. However, the anticancer effect of sesquiterpenoid scabertopin on bladder cancer and its mechanism are still unclear. The aim of this study is to evaluate the antitumor activity of scabertopin in bladder cancer and its potential molecular mechanism in vitro. Our results suggest that scabertopin can induce RIP1/RIP3-dependent necroptosis in bladder cancer cells by promoting the production of mitochondrial reactive oxygen species (ROS), inhibit the expression of MMP-9 by inhibiting the FAK/PI3K/Akt signaling pathway, and ultimately inhibit the migration and invasion ability of bladder cancer cells. At the same time, we also demonstrated that the half-inhibition concentration (IC50) of scabertopin on various bladder cancer cell lines (J82, T24, RT4 and 5637) is much lower than that on human ureteral epithelial immortalized cells (SV-HUC-1). The above observations indicate that scabertopin is a potential therapeutic agent for bladder cancer that acts by inducing necroptosis and inhibiting metastasis.

Since the outbreak of the novel coronavirus disease 2019 (COVID-19) in 2019, many countries have successively developed a variety of vaccines against severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). However, with the continuous spread of SARS-CoV-2, it has evolved several variants; as a result, prevention and control of the pandemic of SARS-CoV-2 has become more important. Among these variants, the Omicron variant has higher transmissibility and immune escape ability and is the main variant causing a large number of COVID-19 breakthrough infection, thus, presenting new challenges to pandemic prevention and control. Hence, we review the biological characteristics of the Omicron variant and discuss the current status and possible mechanism of breakthrough infection caused by the Omicron variant in order to provide insights into the prevention and control of the pandemic of SARS-CoV-2.

A novel Al-Cu-Zr alloy is designed in this paper, which provides a method for further improving the strength of Al-Cu alloys. In this paper, the addition of the micro-alloying element Zr in Al-Cu alloy was studied. The effect of aging treatment on the mechanical properties and precipitation behavior of the alloy was studied. With the addition of Zr, Al 3 Zr phases were formed in the alloy, which acts as obstacles to dislocation motion. In addition, Al 3 Zr phases can be used as the nucleation site of θ' phases to promote precipitation. All this can improve the strength of Al-Cu alloys. After one-step aging, corresponding to the highest hardness, the largest amount of θ' phases were observed in the alloy matrix. By contrast, after two-step aging, the θ' phases were finer, and a large amount of Guinier-Preston (GP) zones formed during the pre-aging step, which were transformed into denser and finer θ' phases in the secondary aging step. After the same solution treatment (540 °C/12 h), undergoing 120 °C/4 h + 175 °C/10 h two-step aging, the ultimate tensile strength, yield strength, and elongation of the Al-Cu-Zr alloy were 398.7 MPa, 313.3 MPa, and 7.9%, respectively., Competing Interests: The authors declare no conflict of interest.

Cu/Zn superoxide dismutase (SOD1) plays a key role in the maintenance of cellular reactive oxygen species (ROS) homeostasis as an antioxidant enzyme. We recently found that SOD1 is involved in the regulation of gene expression in response to changes in cellular ROS levels by binding to DNA-specific sequences. Moreover, the SOD1 binding to DNA was observed to be redox-dependent in solutions. Thus, we examined the redox-dependent DNA binding of SOD1 by multiple measurements, including small-angle X-ray scattering (SAXS), indicating the redox-dependent formation of a DNA-SOD1 complex in solutions. The redox-dependent formation of the DNA-SOD1 complex could underlie the SOD1 regulation of gene expression.

With the increasingly serious environmental problems, coordinating the relationship between the environment and economic development has become a crucial task for developing countries, especially China. This paper studies the role of eco-industrial parks (EIPs) in the emissions of carbon dioxide and sulfur dioxide in China with the difference-in-difference (DID) approach by focusing on the entire process of EIPs' establishment-upgrading provincial development zones (DZs) to national DZs and then transforming national DZs into EIPs. Besides, we examined the heterogeneous effect of the different transformations from national economic and technological development zones (ETZs) or national high-tech zones (HTZs) to EIPs. In addition, we studied the spatial spillover effects of EIPs and their paths with the spatial difference-in-difference (SDID) method. The results show that neither provincial DZs nor national DZs can significantly reduce sulfur dioxide and carbon dioxide emissions. Only when national DZs are transformed into EIPs can they be reduced significantly. However, the different transformations from the HTZs and ETZs to EIPs have different effects on emissions. Moreover, EIPs have technology spillovers and demonstration effects on surrounding areas. Therefore, EIPs can reduce emissions in the surrounding areas. The results indicate that, in order to achieve high-quality development and coordinate the relationship between environment and economic development, we should take positive steps to promote the transformation of DZs into EIPs.

We designed and synthesized an asymmetric non-fullerene small molecule acceptor (NF-SMA) IDT-TNIC with an A-D-π-A structure, based on an indacenodithiophene (IDT) central core, with a unidirectional non-fused alkylthio-thiophene (T) π-bridge, and 2-(3-oxo-2,3-dihydro-1H-cyclopenta[b]naphthalen-1-ylidene)malononitrile (NIC) extended terminal groups. IDT-TNIC molecules still maintain a good coplanar structure, which benefits from the non-covalent conformational locks (NCL) between O···S and S···S. The asymmetric structure increases the molecular dipole moment, and the extended terminal group broadens the absorption of the material, resulting in an excellent photovoltaic performance of IDT-TNIC. The photovoltaic device, based on PBDB-T:IDT-TNIC, exhibits an energetic PCE of 11.32% with a high V oc of 0.87 V, high J sc of 19.85 mA cm -2 , and a low energy loss of 0.57 eV. More importantly, IDT-TNICs with asymmetric structures show a superior property compared to symmetric IDT-Ns. The results demonstrate that it is an effectual strategy to enhance the properties of asymmetric A-D-π-A-based NF-SMAs with non-fused NCL π-bridges and extended terminal groups.

Spatter is an inherent, unpreventable, and undesired phenomenon in laser powder bed fusion (L-PBF) additive manufacturing. Spatter behavior has an intrinsic correlation with the forming quality in L-PBF because it leads to metallurgical defects and the degradation of mechanical properties. This impact becomes more severe in the fabrication of large-sized parts during the multi-laser L-PBF process. Therefore, investigations of spatter generation and countermeasures have become more urgent. Although much research has provided insights into the melt pool, microstructure, and mechanical property, reviews of spatter in L-PBF are still limited. This work reviews the literature on the in situ detection, generation, effects, and countermeasures of spatter in L-PBF. It is expected to pave the way towards a novel generation of highly efficient and intelligent L-PBF systems.

An effective method was developed to improve the interfacial interaction between Mutiwalled carbon nanotubes (MWCNTs) and epoxy matrix. The performance of thermal conductivity and strength of the epoxy vitrimer were enhanced by polydopamine (PDA) coating. Polydopamine is a commonly used photothermal agent, which of course, was effective in modifying MWCNTs used in photoresponsive epoxy resin. The surface temperature of the epoxy composite with 3% MWCNTs@PDA fillers added increased from room temperature to 215 °C in 48 s. The metal-catechol coordination interactions formed between the catechol groups of PDA and Zn 2+ accelerated the stress relaxation of epoxy vitrimer. Moreover, the shape memory, repairing, and recycling of epoxy vitrimer were investigated. Therefore, dopamine coating is a multifunctional approach to enhance the performance of epoxy vitrimer.

Aquaculture environment plays important roles in regulating the growth, morphology, nutrition, and flavor of aquatic products. The present study investigated growth, morphology, nutrition, and flavor formation in largemouth bass (Micropterus salmoides) cultured in the ponds with (EM group) and without (M group) the submerged macrophytes (Elodea nuttallii). Fish in the EM group showed a significantly greater body length, higher growth rate, and lower hepatosomatic index than those in the M group (p< 0.05). Moreover, compared with fish in the M group, those in the EM group showed improved muscle quality with significantly elevated levels of crude protein, total free and hydrolysable amino acids, and polyunsaturated fatty acids (p < 0.05). Specifically, certain amino acids related to flavor (Glu, Asp, Ala, and Arg) and valuable fatty acids (C18:2, C18:3n3, C20:3n3, and C22:6) were more abundant in the EM group (p < 0.05). In addition, the levels of 19 volatile (p < 0.05) were significantly higher in the EM group than in the M group. Therefore, E. nuttallii significantly improved growth, morphological traits, nutritional components, and characteristic flavor in largemouth bass, indicating the superior nutritional value and palatability of fish cultured with submerged macrophytes.

As a complementary and symbiotic agro-ecological cycle system, a nature-based integrated rice-fish-duck farming ecosystem was developed in the Honghe Hani Rice Terraces. The main research objective was to evaluate the ecosystem services based on case studies of the Hani integrated rice-fish-duck terraced farming system and determine its potential and its importance as an ecological asset. We developed a valuation model to assess the value of the integrated farming system based on the three aspects of provisioning, regulation and maintenance, and cultural services; we selected eight groups and 10 indictors to evaluate the ecosystem services of the integrated ecosystem in Honghe Hani Rice Terraces was 3.316 billion CNY, of which the provisioning service value was 1.76 billion CNY, the regulation and maintenance service value was 1.32 billion CNY, and the cultural services value was 230.85 million CNY. The evaluation will be useful as a theoretical reference for poverty alleviation policy makers in similar poverty-stricken areas, enabling them to better protect and promote this mode of farming and further promote the protection of the natural environment and cultural heritage alongside the sustainable development of natural resources and human well-being.