Search

In order to better understand pore–throat structure characteristics, the coupling relationship between micropore–throat structure and macro reservoir quality and influencing factors caused by authigenic minerals were studied. Petrographic analyses, scanning electron microscopy (SEM), pressure-controlled mercury injection (PMI), nuclear magnetic resonance (NMR), and X-ray diffraction (XRD) were performed on a suite of tight reservoir samples from the Chang 8 Member of the Upper Triassic Yanchang Formation in the southwestern Ordos Basin, China. The results show that the pore–throat sizes obtained with the combination of PMI and NMR methods varied from nano- to microscale, revealing pore–throat sizes ranging from 0.001 μm to 70 μm, and showing that pore–throats with a radius larger than 1.0 μm are rare. Larger pore–throats with good connectivity (>rapex) account for a smaller part of the total pore volume, ranging from approximately 7.58% to 38.90% with an average of 22.77%, but account for more than 80% of contributions to permeability. The effective movable fluid porosity (φemp) measured by NMR, ranging from approximately 0.10% to 7.07% with an average of 2.56%, had a positive contribution to permeability. The contents of chlorite occurrence state, other than illite, are beneficial to pore–throat preservation. A new reservoir evaluation scheme of the Chang 8 reservoir is established. These research results provide a theoretical basis for the evaluation and development of tight sandstone oil and gas exploration. [ABSTRACT FROM AUTHOR]

Soil quality is an indicator of the ability to ensure ecological security and sustainable soil usage. The effects of long-term straw incorporation and different irrigation regimes on the yield and soil quality of paddy fields in cold regions remain unclear. This study established four treatments: controlled irrigation + continuous straw incorporation for 3 years (C3), controlled irrigation + continuous straw incorporation for 7 years (C7), flooded irrigation + continuous straw incorporation for 3 years (F3), and flooded irrigation + continuous straw incorporation for 7 years (F7). Analysis was conducted on the impact of various irrigation regimes and straw incorporation years on the physicochemical characteristics and quality of the soil. The soil quality index (SQI) for rice fields was computed using separate datasets for each treatment. The soil nitrate nitrogen, available phosphorus, soil organic carbon, and soil organic matter contents of the C7 were 93.51%, 5.80%, 8.90%, and 8.26% higher compared to C3, respectively. In addition, the yield of the C7 treatment was 5.18%, 4.89%, and 10.32% higher than those of F3, C3, and F7, respectively. The validity of the minimum data set (MDS) was verified by correlation, Ef and ER, which indicated that the MDS of all treatments were able to provide a valid evaluation of soil quality. The MDS based SQI of C7 was 11.05%, 11.97%, and 27.71% higher than that of F3, C3, and F7, respectively. Overall, long-term straw incorporation combined with controlled irrigation increases yield and soil quality in paddy fields in cold regions. This study provides a thorough assessment of soil quality concerning irrigation regimes and straw incorporation years to preserve food security and the sustainability of agricultural output. Additionally, it offers a basis for soil quality diagnosis of paddy fields in the Northeast China. [ABSTRACT FROM AUTHOR]

Inner fracture zones play a decisive role in the formation of high-quality reservoirs in buried hill reservoirs in covered metamorphic rock. Based on core, sidewall core, thin section, seismic, logging and reservoir physical property data, the fracture development characteristics of the Bozhong 13-2 block buried hill reservoir are described in detail and the controlling factors and the influence on reservoir quality are discussed. The results showed: (1) three groups of tectonic fractures developed in the study area—near-EW-striking, ENE-striking and nearly N–S-striking fractures—were controlled by the early Indosinian thrusting, the late Indosinian to early Yanshanian sinistral strike-slipping and the late Yanshanian late dextral strike-slipping in the Bohai Bay Basin, respectively. The ENE- and nearly-E-W-striking fractures are the most common, and the dip angles of the fractures are mostly between 35° and 75° and thus oblique. (2) The Indosinian-early Yanshanian was the main fracture-forming period, and the dextral strike-slip action in the late Yanshanian was the key to maintaining effective fractures. Imaging logging shows that 97.87% of the fractures are effective fractures. Based on thin section observation, 14.47% of the fractures are unmodified open fractures and 80.37% of the fractures are effective fractures due to reactivation. (3) The late Yanshanian strike-slip fault transformed the deformation adjustment zone formed by the early Indosinian thrust faulting and the core of the fold structure was more conducive to fracture development. The fracture density of a single well located within the deformation adjustment zone and at the core of the fold is between 0.93–1.49 m−1, the fracture density of a single well located only at the core of the fold is between 0.67–0.75 m−1 and that of a single well located at the wing of the fold is between 0.35–0.59 m−1. Diabase dike intrusions promoted the development of local fractures. (4) Fractures promote the migration and accumulation of oil and gas, and the fracture density in the oil layer is between 0.81–2.19 m−1. That in the nonoil layer is between 0.25–1.12 m−1. In addition, fractures not only provide storage space but also effectively improve the reservoir capacity of the inner fracture zones of buried hill reservoirs by concentrating dissolution. [ABSTRACT FROM AUTHOR]

With the continuous growth in global energy demand, research and development of unconventional oil and gas reservoirs have become crucial in the field of energy. This study focuses on the Chang 3 reservoir of the Yanchang Formation in the Ordos Basin, Weibei Oilfield, China. This reservoir is a typical tight sandstone reservoir, and its microscopic pore structure and displacement mechanism are essential for the efficient development of tight oil. However, the reservoir faces challenges such as complex microscopic pore structures and unclear displacement mechanisms, which hinder the efficient development of tight oil. In light of these challenges, through various studies including core observation, high-pressure mercury injection tests, water flooding experiments, oil-water two-phase relative permeability measurements, and stress sensitivity experiments, it was found that the Chang 3 reservoir exhibits strong microscopic heterogeneity. The pore-throat distribution characteristics mainly present two types: single peak and double peak, with the double peak type being predominant. The reservoir was classified and evaluated based on these characteristics. The improved injection ratio and properties enhance oil displacement efficiency, but an increase in irreducible water saturation has a negative impact on efficiency. The stress sensitivity of the reservoir fluctuates between weak and strong, with permeability being sensitive to net confining pressure. It is recommended to pay particular attention to the stress-sensitivity characteristics during reservoir development. The research results provide a scientific basis for the optimized development of tight oil reservoirs in this region, promote the sustainable development of unconventional oil and gas resources, and have significant theoretical and practical implications. [ABSTRACT FROM AUTHOR]

Cucumber is an economically important vegetable crop, and the warts (composed of spines and Tubercules) of cucumber fruit are an important quality trait that influences its commercial value. WOX transcription factors are known to have pivotal roles in regulating various aspects of plant growth and development, but their studies in cucumber are limited. Here, genome-wide identification of cucumber WOX genes was performed using the pan-genome analysis of 12 cucumber varieties. Our findings revealed diverse CsWOX genes in different cucumber varieties, with variations observed in protein sequences and lengths, gene structure, and conserved protein domains, possibly resulting from the divergent evolution of CsWOX genes as they adapt to diverse cultivation and environmental conditions. Expression profiles of the CsWOX genes demonstrated that CsWOX9 was significantly expressed in unexpanded ovaries, especially in the epidermis. Additionally, analysis of the CsWOX9 promoter revealed two binding sites for the C2H2 zinc finger protein. We successfully executed a yeast one-hybrid assay (Y1H) and a dual-luciferase (LUC) transaction assay to demonstrate that CsWOX9 can be transcriptionally activated by the C2H2 zinc finger protein Tu, which is crucial for fruit Tubercule formation in cucumber. Overall, our results indicated that CsWOX9 is a key component of the molecular network that regulates wart formation in cucumber fruits, and provide further insight into the function of CsWOX genes in cucumber. [ABSTRACT FROM AUTHOR]

In this paper, a new simultaneous retrieval method of the SIRAW algorithm is introduced and carried out on FY3D/MERSI-II satellite images to obtain the aerosol optical thickness (AOT) and normalized water-leaving radiance (WLR) over the ocean. In order to improve the operation efficiency of SIRAW, a machine learning solver is developed to improve the speed of forward radiative transfer computation during retrieval. Ground-based measurement data from AERONET-OC and satellite products from VIIRS are used for comparative verification. The results show that the retrieved AOT and WLR from SIRAW are both in good agreement with those of AERONET-OC and VIIRS. Further, considering the degradation of the MERSI sensor, a new calibration scheme on 412 nm and 443 nm is adopted and an evaluation is carried out. Inter-comparison of derived WLR between MERSI and VIIRS indicates that the new calibration scheme could effectively improve the WLR retrieval accuracy of MERSI with better consistency to the official data of VIIRS. Therefore, this paper confirms that a simultaneous retrieval scheme combined with effective calibration coefficients can be used for high-precision retrieval of real aerosol and water-leaving radiation. [ABSTRACT FROM AUTHOR]

Appropriate irrigation schedules could minimize the existing imbalance between agricultural water supply and crop water requirements (ETc), which is severely impacted by climate change. In this study, different hydrological years (a wet year, normal year, dry year, and an extremely dry year) in Heilongjiang Province were calculated by hydrological frequency methods. Then, the single crop coefficient method was used to calculate the maize ETc, based on the daily meteorological data of 26 meteorological stations in Heilongjiang Province from 1960 to 2020. Afterward, the CROPWAT model was used to calculate the effective precipitation (Pe) and irrigation water requirement (Ir), and formulate the irrigation schedules of maize in Heilongjiang Province under different hydrological years. The results showed that ETc and Ir decreased first and then increased from west to east. The Pe and crop water surplus deficit index increased first and then decreased from west to east in Heilongjiang Province. Meanwhile, the average values of the Ir in were 171.14 mm, 232.79 mm, 279.08 mm, and 334.47 mm in the wet year, normal year, dry year, and extremely dry year, respectively. Heilongjiang Province was divided into four irrigation zones according to the Ir of different hydrological years. Last, the irrigation quotas for the wet year, normal year, dry year, and extremely dry year were 0~180 mm, 20~240 mm, 60~300 mm, and 80~430 mm, respectively. This study provides reliable support for maize irrigation practices in Heilongjiang Province, China. [ABSTRACT FROM AUTHOR]

Nonlinear mapping is an essential and common demand in online systems, such as sensor systems and mobile phones. Accelerating nonlinear mapping will directly speed up online systems. Previously the authors of this paper proposed a Dendrite Net (DD) with enormously lower time complexity than the existing nonlinear mapping algorithms; however, there still are redundant calculations in DD. This paper presents a DD with an acceleration module (AC) to accelerate nonlinear mapping further. We conduct three experiments to verify whether DD with AC has lower time complexity while retaining DD's nonlinear mapping properties and system identification properties: The first experiment is the precision and identification of unary nonlinear mapping, reflecting the calculation performance using DD with AC for basic functions in online systems. The second experiment is the mapping precision and identification of the multi-input nonlinear system, reflecting the performance for designing online systems via DD with AC. Finally, this paper compares the time complexity of DD and DD with AC and analyzes the theoretical reasons through repeated experiments. Results: DD with AC retains DD's excellent mapping and identification properties and has lower time complexity. Significance: DD with AC can be used for most engineering systems, such as sensor systems, and will speed up computation in these online systems. [ABSTRACT FROM AUTHOR]

Phototheranostics that concurrently integrates accurate diagnosis (e.g., fluorescence and photoacoustic (PA) imaging) and in situ therapy (e.g., photodynamic therapy (PDT) and photothermal therapy (PTT)) into one platform represents an attractive approach for accelerating personalized and precision medicine. The second near-infrared window (NIR-II, 1000–1700 nm) has attracted considerable attention from both the scientific community and clinical doctors for improved penetration depth and excellent spatial resolution. NIR-II agents with a PDT property as well as other functions are recently emerging as a powerful tool for boosting the phototheranostic outcome. In this minireview, we summarize the recent advances of photodynamic NIR-II aggregation-induced emission luminogens (AIEgens) for biomedical applications. The molecular design strategies for tuning the electronic bandgaps and photophysical energy transformation processes are discussed. We also highlight the biomedical applications, such as image-guided therapy of both subcutaneous and orthotopic tumors, and multifunctional theranostics in combination with other treatment methods, including chemotherapy and immunotherapy; and the precise treatment of both tumor and bacterial infection. This review aims to provide guidance for PDT agents with long-wavelength emissions to improve the imaging precision and treatment efficacy. We hope it will provide a comprehensive understanding about the chemical structure–photophysical property–biomedical application relationship of NIR-II luminogens. [ABSTRACT FROM AUTHOR]

The migration of plasticizers such as nitroglycerin seriously affects the storage and working safety of rocket systems. In this work, hydroxy-terminated polybutadiene (HTPB) liner composites with the cross-linked structure were prepared by cross-linking isocyanate functionalized graphene oxide (IGO) with HTPB to prevent the migration of high energy plasticizers in the propellant. IGO was uniformly dispersed in the matrix as reinforcement and cross-linker, providing good migration resistance and ablation resistance for the liner composites. Compared with pure HTPB, the migration resistance of the liner with 0.5 wt% IGO increased by 18.94%, 16.33% and 15.34% at 25 °C, 60 °C and 90 °C, respectively. In addition, the ablation resistance of the HTPB liner was improved by the addition of IGO. The improved anti-migration properties come from the special laminar structure of IGO and the dense molecular chains network of the cross-linked composites. [ABSTRACT FROM AUTHOR]

Precision medicine requires highly sensitive and specific diagnostic strategies with high spatiotemporal resolution. Accurate detection and monitoring of endogenously generated biomarkers at the very early disease stage is of extensive importance for precise diagnosis and treatment. Aggregation-induced emission luminogens (AIEgens) have emerged as a new type of excellent optical agents, which show great promise for numerous biomedical applications. In this review, we highlight the recent advances of AIE-based probes for detecting reactive species (including reactive oxygen species (ROS), reactive nitrogen species (RNS), reactive sulfur species (RSS), and reactive carbonyl species (RCS)) and related biomedical applications. The molecular design strategies for increasing the sensitivity, tuning the response wavelength, and realizing afterglow imaging are summarized, and theranostic applications in reactive species-related major diseases such as cancer, inflammation, and vascular diseases are reviewed. The challenges and outlooks for the reactive species-activatable AIE systems for disease diagnostics and therapeutics are also discussed. This review aims to offer guidance for designing AIE-based specifically activatable optical agents for biomedical applications, as well as providing a comprehensive understanding about the structure–property application relationships. We hope it will inspire more interesting researches about reactive species-activatable probes and advance clinical translations. [ABSTRACT FROM AUTHOR]

YABBY transcription factors play important roles in plant growth and development. However, little is known about YABBY genes in Cucurbitaceae. Here, we identified 59 YABBY genes from eight cucurbit species, including cucumber (C. sativus L.), melon (C. melon L.), watermelon (C. lanatus), wax gourd (B. hispida), pumpkin (C. maxima), zucchini (C. pepo L.), silver-seed gourd (C. argyrosperma), and bottle gourd (L. siceraria). The 59 YABBY genes were clustered into five subfamilies wherein the gene structures and motifs are conserved, suggesting similar functions within each subfamily. Different YABBY gene numbers in eight cucurbit species indicated that gene loss or duplication events exist in an evolutionary process across Cucurbitaceae. The cis-acting elements analysis implied that the YABBYs may be involved in plant development, and phytohormone, stress, and light responses. Importantly, YABBY genes exhibited organ-specific patterns in expression in cucumber. Furthermore, a gene CsaV3_6G038650 was constitutively expressed at higher levels at different fruit development stages and might play a crucial role in cucumber fruit development. Collectively, our work will provide a better understanding for further function identifications of YABBY genes in Cucurbitaceae. [ABSTRACT FROM AUTHOR]

In recent years, the problem of underdetermined blind source separation (UBSS) has become a research hotspot due to its practical potential. This paper presents a novel method to solve the problem of UBSS, which mainly includes the following three steps: Single source points (SSPs) are first screened out using the principal component analysis (PCA) approach, which is based on the statistical features of signal time-frequency (TF) points. Second, a mixing matrix estimation method is proposed that combines Ordering Points To Identify the Clustering Structure (OPTICS) with an improved potential function to directly detect the number of source signals, remove noise points, and accurately calculate the mixing matrix vector; it is independent of the input parameters and offers great accuracy and robustness. Finally, an improved subspace projection method is used for source signal recovery, and the upper limit for the number of active sources at each mixed signal is increased from m − 1 to m. The unmixing process of the proposed algorithm is symmetrical to the actual signal mixing process, allowing it to accurately estimate the mixing matrix and perform well in noisy environments. When compared to previous methods, the source signal recovery accuracy is improved. The method's effectiveness is demonstrated by both theoretical and experimental results. [ABSTRACT FROM AUTHOR]

The liquid crystal-based method is a new technology developed for flow visualizations and measurements at microscale with great potentials. It is the priority to study the flow characteristics before implementation of such a technology. A numerical analysis has been applied to solve the simplified dimensionless two-dimensional Leslie–Ericksen liquid crystal dynamic equation. This allows us to analyze the coupling effect of the LC's director orientation and flow field. We will be discussing two classic shear flow cases at microscale, namely Couette and Poiseuille flow. In both cases, the plate drag speed in the state of Couette flow are varied as well as the pressure gradients in Poiseuille flow state are changed to study their effects on the flow field distributions. In Poiseuille flow, with the increase of applied pressure gradient, the influence of backflow significantly affects the flow field. Results show that the proposed method has great advantages on measurement near the wall boundaries which could complement to the current adopted flow measurement technique. The mathematical model proposed in this article could be of great potentials in the development of the quantitatively flow measurement technology. [ABSTRACT FROM AUTHOR]

The liquid crystal-based method is a new technology developed for flow visualizations and measurements at microscale with great potentials. It is the priority to study the flow characteristics before implementation of such a technology. A numerical analysis has been applied to solve the simplified dimensionless two-dimensional Leslie-Ericksen liquid crystal dynamic equation. This allows us to analyze the coupling effect of the LC's director orientation and flow field. We will be discussing two classic shear flow cases at microscale, namely Couette and Poiseuille flow. In both cases, the plate drag speed in the state of Couette flow are varied as well as the pressure gradients in Poiseuille flow state are changed to study their effects on the flow field distributions. In Poiseuille flow, with the increase of applied pressure gradient, the influence of backflow significantly affects the flow field. Results show that the proposed method has great advantages on measurement near the wall boundaries which could complement to the current adopted flow measurement technique. The mathematical model proposed in this article could be of great potentials in the development of the quantitatively flow measurement technology.