Search

This paper uses the adaptive dynamic programming (ADP) method to achieve optimal trajectory tracking control for quadrotors. Relying on an established mathematical model of a quadrotor, the approximate optimal trajectory tracking control, which consists of the steady-state control input and the approximate optimal feedback control input, is designed for a nominal system. Considering the compound disturbances in position and attitude dynamic models, disturbance observers are introduced. The estimated values are used to design robust compensation inputs to suppress the effect of the compound disturbances for good trajectory tracking performance. Theoretically, the Lyapunov theorem demonstrates the stability of a closed-loop system. The robustness and effectiveness of the proposed controller are confirmed by the simulation results. [ABSTRACT FROM AUTHOR]

This paper presents a practical study on how to improve the ℋ ∞ performance and meet the input–output constraints of the two-degrees-of-freedom (DOF) flexible-joint manipulator system (FJMS) with parameter uncertainties and external disturbances. For this reason, a robust constrained moving-horizon ℋ ∞ controller is designed to improve the system ℋ ∞ performance while still satisfying the input–output constraints of the uncertain system. First, the uncertain controlled system model of the two-DOF FJMS is established via the Lagrange equation method, Spong's assumption, and the linear fractional transformation (LFT) technique. Then, the control requirements and input–output constraints of the uncertain system are transformed into the linear matrix inequality (LMI) via the theory of ℋ ∞ control and the full-block multiplier technique. Next, the LMI optimization problem refreshed by the current state is addressed at each sample moment with the idea of the moving-horizon control of the model predictive control (MPC), and the calculated gain is implemented to the nonlinear closed-loop system under the state feedback structure. The validity and feasibility of the designed control scheme is finally verified via the results of simulation experiments. [ABSTRACT FROM AUTHOR]

Nuclear safety has always been a focal point in the field of nuclear applications. Mobile robots carrying specific sensors for nuclear-radiation detection have become an alternative to manual detection. This work presents an autonomous α/β radiation mapping framework, using a mobile robot carrying a light detection and ranging (LiDAR) and a nuclear-radiation-detection sensor. The method employs simultaneous localization and mapping (SLAM) techniques and radiation-detection sensors. Cartographer is adopted as a demonstration example to map the unknown environment. Radiation data are obtained through the radiation detection sensor and projected onto the environment map after coordinate alignment. The color-coded radiation map is shown on the environment map according to the dose rate. The simulation and real-environment experiments in a robot-operating system (ROS) validate the effectiveness of the proposed method in different radiation scenarios for both indoor and outdoor environments. [ABSTRACT FROM AUTHOR]