Search

Cellulosic ethanol is the key technology to alleviate the pressure of energy supply and climate change. However, the ethanol production process, which is close to industrial production and has a high saccharification rate and ethanol yield, still needs to be developed. This study demonstrates the effective conversion of poplar wood waste into fuel-grade ethanol. By employing a two-step pretreatment using sodium chlorite (SC)-dilute sulfuric acid (DSA), the raw material achieved a sugar conversion rate exceeding 85% of the theoretical value. Under optimized conditions, brewing yeast co-utilizing C6/C5 enabled a yield of 35 g/L ethanol from 10% solid loading delignified poplar hydrolysate. We increased the solid loading to enhance the final ethanol concentration and optimized both the hydrolysis and fermentation stages. With 20% solid loading delignified poplar hydrolysate, the final ethanol concentration reached 60 g/L, a 71.4% increase from the 10% solid loading. Our work incorporates the pretreatment, enzymatic hydrolysis, and fermentation stages to establish a simple, crude poplar waste fuel ethanol process, expanding the range of feedstocks for second-generation fuel ethanol production. [ABSTRACT FROM AUTHOR]

Apple wood waste (AWW), mainly tree trucks, is collectible lignocellulosic biomass from orchard rotation. The biorefinery of AWW is challenging because of the hard and dense structure. In the present work, chemical composition determination and microstructure observation was performed for the first time on AWW. Alkali-preimpregnation-assisted soda cooking (APSC) was developed to separate cellulose a pulp and lignin from AWW. APSC attained pulp yield of 34.2% at 23% NaOH, showing a 13.2% improvement compared to conventional soda cooking (SC). Fiber length analysis showed APSC-AWW pulp consisted mainly of medium and short fibers, which means blending with long-fibered pulp to enhance the physical strength of pulp sheets. A blend of APSC-AWW pulp and long-fibered pulp in the proportion of 80:20 attained comparable physical strength to hardwood kraft pulp. ASPC-AWW lignin was separated from spent liquor by acidification and then purified by dialysis desalination. The purified ASPC-AWW lignin showed a weight-average molecular weight of 4462 g/mol, similar to softwood kraft lignin but more uniform. Structural analysis revealed that ASPC-AWW lignin was composed of a syringyl unit (S), guaiacyl unit(G), and p-hydroxyphenyl unit (H), and an S unit was dominant with an S/G/H ratio of 74.5:18.2:7.3. It is believed the utilization of fruit tree wood waste as the feedstock of biorefinery is attractive to countries without sufficient forestry resources. Furthermore, the developed APSC is based on conventional SC, which ensures the feasibility of an industrial application. [ABSTRACT FROM AUTHOR]

The present work describes the preparation of nano-lignin particles from calcium lignosulfonate (CL). The nano-lignin was fabricated from colloidal lignin–polyacrylamide complexes via self-assembly. The sizes of the nano-lignin particles were examined by dynamic light scattering (DLS) and scanning electron microscopy (SEM). The results indicated that the average particle size of the prepared nano-lignin was approximately 100 nm. In addition, the obtained nano-lignin exhibited enhanced fluorescence intensity when compared with the original lignin, which might represent a potential application of this nano-particle product. [ABSTRACT FROM AUTHOR]