Search

In recent years, urban floods have occurred frequently in China. Therefore, there is an urgent need to strengthen urban flood resilience. This paper proposed a hybrid multi-criteria group decision-making method to assess urban flood resilience based on heterogeneous data, group decision-making methodologies, the pressure-state–response model, and social–economic–natural complex ecosystem theory (PSR-SENCE model). A qualitative and quantitative indicator system is formulated using the PSR-SENCE model. Additionally, a new weighting method for indicators, called the synthesis weighting-group analytic hierarchy process (SW-GAHP), is proposed by considering both intrapersonal consistency and interpersonal consistency of decision-makers. Furthermore, an extensional group decision-making technology (EGDMT) based on heterogeneous data is proposed to evaluate qualitative indicators. The flexible parameterized mapping function (FPMF) is introduced for the evaluation of quantitative indicators. The normal cloud model is employed to handle various uncertainties associated with heterogeneous data. The evaluations for Beijing from 2017 to 2021 reveal a consistent annual improvement in urban flood resilience, with a 14.1% increase. Subsequently, optimization recommendations are presented not only for favorable indicators such as regional economic status, drainability, and public transportation service capacity but also for unfavorable indicators like flood risk and population density. This provides a theoretical foundation and a guide for making decisions about the improvement of urban flood resilience. Finally, our proposed method shows superiority and robustness through comparative and sensitivity analyses. [ABSTRACT FROM AUTHOR]

Atmospheric turbulence is a key factor contributing to data distortion in mid-to-long-range target observation tasks. Neural networks have become a powerful tool for dealing with such problems due to their strong ability to fit nonlinearities in the spatial domain. However, the degradation in data is not confined solely to the spatial domain but is also present in the frequency domain. In recent years, the academic community has come to recognize the significance of frequency domain information within neural networks. There remains a gap in research on how to combine dual-domain information to reconstruct high-quality images in the field of blind turbulence image restoration. Drawing upon the close association between spatial and frequency domain degradation information, we introduce a novel neural network architecture, termed Dual-Domain Removal Turbulence Network (DDRTNet), designed to improve the quality of reconstructed images. DDRTNet incorporates multiscale spatial and frequency domain attention mechanisms, combined with a dual-domain collaborative learning strategy, effectively integrating global and local information to achieve efficient restoration of atmospheric turbulence-degraded images. Experimental findings demonstrate significant advantages in performance for DDRTNet compared to existing methods, validating its effectiveness in the task of blind turbulence image restoration. [ABSTRACT FROM AUTHOR]

The real-time tracking of moving objects has extensive applications in various domains. Existing tracking methods typically utilize video image processing, but their performance is limited due to the high information throughput and computational requirements associated with processing continuous images. Additionally, imaging in certain spectral bands can be costly. This paper proposes a non-imaging real-time three-dimensional tracking technique for distant moving targets using single-pixel LiDAR. This novel approach involves compressing scene information from three-dimensional to one-dimensional space using spatial encoding modulation and then obtaining this information through single-pixel detection. A LiDAR system is constructed based on this method, where the peak position of the detected full-path one-dimensional echo signal is used to obtain the target distance, while the peak intensity is used to obtain the azimuth and pitch information of the moving target. The entire process requires minimal data collection and a low computational load, making it feasible for the real-time three-dimensional tracking of single or multiple moving targets. Outdoor experiments confirmed the efficacy of the proposed technology, achieving a distance accuracy of 0.45 m and an azimuth and pitch angle accuracy of approximately 0.03° in localizing and tracking a flying target at a distance of 3 km. [ABSTRACT FROM AUTHOR]

Over the past three decades, China has seen aerosol levels substantially surpass the global average, significantly impacting regional climate. This study investigates the long-term and seasonal variations of aerosols in the Huai River Basin (HRB) using MODIS, CALIOP observations from 2007 to 2021, and ground-based measurements. A notable finding is a significant decline in the annual mean Aerosol Optical Depth (AOD) across the HRB, with MODIS showing a decrease of approximately 0.023 to 0.027 per year, while CALIOP, which misses thin aerosol layers, recorded a decrease of about 0.016 per year. This downward trend is corroborated by improvements in air quality, as evidenced by PM2.5 measurements and visibility-based aerosol extinction coefficients. Aerosol decreases occurred at all heights, but for aerosols below 800 m, with an annual AOD decrease of 0.011. The study also quantifies the long-term trends of five major aerosol types, identifying Polluted Dust (PD) as the predominant frequency type (46%), which has significantly decreased, contributing to about 68% of the total AOD reduction observed by CALIOP (0.011 per year). Despite this, Dust and Polluted Continental (PC) aerosols persist, with PC showing no clear trend of decrease. Seasonal analysis reveals aerosol peaks in summer, contrary to surface measurements, attributed to variations in the Boundary Layer (BL) depth, affecting aerosol distribution and extinction. Furthermore, the study explores the influence of seasonal wind patterns on aerosol type variation, noting that shifts in wind direction contribute to the observed changes in aerosol types, particularly affecting Dust and PD occurrences. The integration of satellite and ground measurements provides a comprehensive view of regional aerosol properties, highlighting the effectiveness of China's environmental policies in aerosol reduction. Nonetheless, the persistence of high PD and PC levels underscores the need for continued efforts to reduce both primary and secondary aerosol production to further enhance regional air quality. [ABSTRACT FROM AUTHOR]

Nowadays, AC charging piles are widely used, and with the increasing number of charging piles, the harmonic pollution generated by them becomes more serious and affects the power quality of the grid. Aiming at the problem of harmonic control of the single-phase AC charging pile, it is decided to apply the active filter technology. The single-phase parallel active filter (PAPF) is selected according to the characteristics of the charging pile. The single harmonic detection method is studied based on instantaneous reactive power theory, and a new adaptive low-pass filter with fixed-step size is proposed to improve the performance of harmonic detection by combining the least mean square (LMS) and the least fourth-order moment (LMF) adaptive algorithms. The PAPF control part adopts the composite control strategy of inner and outer loop combined with repetitive control to complete the voltage stabilization control, harmonic tracking, and compensation. Based on MATLAB/SIMULINK, the output waveforms of the low-pass filter link are simulated and analyzed, and the prototype experiment is carried out. The results verify that the algorithm can improve the performance of harmonic detection. Finally, the single-phase PAPF system simulation is established and the harmonic compensation capability of system is analyzed by the Fast Fourier Transform (FFT). The results demonstrate that single-phase PAPF can effectively manage harmonics and the total harmonic distortion (THD) is reduced to less than 5%. [ABSTRACT FROM AUTHOR]

Fourier ptychography imaging technology is a method developed in recent years to achieve high-resolution imaging. In the traditional macro Fourier ptychography technology, the scanning method when the camera captures low-resolution images mostly uses the rectangular linear grid format. These acquired images contain a small amount of complementary information, and a large number of low-resolution images are needed to achieve high-resolution imaging. Redundant measurements will extend the sampling and reconstruction time, and require more computing resources. In this paper, we propose to obtain the target image spectral energy distribution by pre-sampling. And according to the energy distribution, we use irregular and non-uniform sampling modes to restore the target image. With the same number of samples and same reconstruction time, higher resolution imaging can be achieved compared with traditional methods. Simulation and experimental studies are carried out in this paper, and the results confirm the effectiveness of the proposed methods. Compared with the traditional sampling mode, the two sampling modes proposed in this paper increase the resolution from 4.49 lp/mm to 5.66 lp/mm and 5.04 lp/mm respectively. [ABSTRACT FROM AUTHOR]

For ground-based lidars in atmospheric observation, their data acquisition unit and control unit usually work independently. They usually require the cooperation of large-volume, high-power-consumption Industrial Personal Computer (IPC). However, the space-borne lidar has high requirements on the stability and integration of the acquisition control system. In this paper, a new data acquisition and lidar control system (DALCS) was developed based on System-on-Chip Field-Programmable Gate Array (SoC FPGA) technology. It can be used in lidar systems with high repetition rate and photon-counting mode and has functions such as data storage, laser control, automatic collimation, wireless communication, and fault self-test. DALCS has two working modes: in online mode, the echo data collected by DALCS are transmitted to the computer for display in real-time and then stored with the current time as the file name; in offline mode, the data are stored in local non-volatile memory, which can be read remotely and can work autonomously when there is no IPC. The test results showed that in the frequency range of 0–70 M, the counting linearity of DALCS reached 0.9999, and the maximum relative error between the DALCS card and the standard signal source was 0.211%. The comparison results showed that the correlation coefficient between DALCS and MCS-PCI was as high as 0.99768. The DALCS was placed in a self-developed lidar sensor system for continuous observation, and the system worked stably under different weather conditions. The range-squared-corrected signal profiles obtained from the observations reflect the spatial and temporal distribution characteristics of aerosols and clouds well. This provides scheme verification and experimental support for the development of space-borne lidar data acquisition and control system. [ABSTRACT FROM AUTHOR]

Single-pixel imaging (SPI) is a new type of imaging technology that uses a non-scanning single-pixel detector to image objects and has important application prospects and value in many fields. Most of the modulators currently used in SPI systems are digital micromirror device (DMD) modulators, which use a higher frequency for binary modulation than other alternatives. When modulating grayscale information, the modulation frequency is significantly reduced. This paper conducts research on multiple discrete objects in a scene and proposes using binary patterns to locate and image these objects. Compared with the existing methods of using gray patterns to locate and image multiple objects, the method proposed in this paper is more suitable for DMD-type SPI systems and has wider applicability and greater prospects. The principle of the proposed method is introduced, and the effectiveness of the method is experimentally verified. The experimental results show that, compared to traditional SPI methods, the number of patterns required by the proposed method is reduced by more than 85%. [ABSTRACT FROM AUTHOR]

Cloud is an important factor that affects weather and climate, and the vertical distribution of cloud determines its role in the atmospheric radiation transfer process. In this paper, the characteristics of different cloud types and their vertical cloud base height distributions over Eastern China are investigated with a four-year 2B-CLDCLASS-LIDAR product. The intercomparison of cloud base height distribution from ground-based lidar, CloudSat and CALIPSO measurements was studied with observations over the Hefei and Jinhua areas. The 2B-CLDCLASS-LIDAR product has the potential to uncover geographical and seasonal changes in cloud base height distribution over the Hefei area and Jinhua area, which may be beneficial for local climate models, although the CPR on CloudSat suffers from surface clutter or blind-zones. The results show that for non-precipitation cloud over the defined region (Eastern China), the occurrence frequencies of altocumulus, stratocumulus, and cirrus clouds are 29.4%, 21.0%, and 18.9%, respectively. The vertical occurrence frequencies of their cloud base heights are 0.5–8.5 km, below 3.5 km, and 5.5–17.0 km. The precipitation clouds are dominated by nimbostratus (48.4%), cumulus (17.9%), and deep convective clouds (24.2%), and their cloud base heights are all below 3.0 km. The cloud base height distributions have large differences below 3 km between the satellite measurement and ground-based measurement over Hefei site. Between the Hefei site and Jinhua site, the difference in cloud base height distribution measured by ground-based lidar is in good agreement with that measured by satellite over their matched grid boxes. Over the Hefei site, the vertical occurrence frequencies of cloud base height measured by ground-based lidar are higher than the satellite measurement within 0–0.5 km during all the seasons. It is suggested that more cloudy days may result from the sufficient water vapor environment in Hefei. In summer, the occurrence frequency of the cloud base height distribution at a height of 0–2.0 km is lower than other seasons over Jinhua city, which may be associated with the local weather system. Over the Jinhua site, the difference in seasonal cloud base height distribution based on satellite is in good agreement with that based on ground-based lidar. However, it does not appear over Hefei site. Thus, a multi-platform observation of cloud base height seems to be one of the essential ways for improvement in the observation of cloud macroscopic properties. [ABSTRACT FROM AUTHOR]

A compact isotope ratio laser spectrometry (IRLS) instrument was developed for simultaneous measurements of the D/H, 18O/16O and 17O/16O isotope ratios in water by laser absorption spectroscopy at 2.73 μm. Special attention is paid to the spectral data processing and implementation of a Kalman adaptive filtering to improve the measurement precision. Reduction of up to 3-fold in standard deviation in isotope ratio determination was obtained by the use of a Fourier filtering to remove undulation structure from spectrum baseline. Application of Kalman filtering enables isotope ratio measurement at 1 s time intervals with a precision (<1‰) better than that obtained by conventional 30 s averaging, while maintaining a fast system response. The implementation of the filter is described in detail and its effects on the accuracy and the precision of the isotope ratio measurements are investigated.