Search

Foam mixers are classified as low-pressure and high-pressure types. Low-pressure mixers rely on agitator rotation, facing cleaning challenges and complex designs. High-pressure mixers are simple and require no cleaning but struggle with uneven mixing for high-viscosity substances. Traditionally, increasing the working pressure resolved this, but material quality limits it at higher pressures. To address the issues faced by high-pressure mixers when handling high-viscosity materials and to further improve the mixing performance of the mixer, this study focuses on a polyimide high-pressure mixer, identifying four design variables: impingement angle, inlet and outlet diameters, and impingement pressure. Using a Full Factorial Design of Experiments (DOE), the study investigates the impacts of these variables on mixing unevenness. Sample points were generated using Optimal Latin Hypercube Sampling—OLH. Combining the Sparrow Search Algorithm (SSA), Convolutional Neural Network (CNN), and Long Short-Term Memory Network (LSTM), the SSA-CNN-LSTM model was constructed for predictive analysis. The Whale Optimization Algorithm (WOA) optimized the model, to find an optimal design variable combination. The Computational Fluid Dynamics (CFD) simulation results indicate a 70% reduction in mixing unevenness through algorithmic optimization, significantly improving the mixer's performance. [ABSTRACT FROM AUTHOR]

Liquor has a complex system with high dimensional components. The trace components in liquor are varied and have low content and complex coordination relationships. This study aimed to solve the problem of reliance on smell and taste. Based on the characteristics of near-infrared spectrum response to hydrogen-containing groups, qualitative analysis was carried out in combination with machine learning technology. Firstly, an iterative adaptive weighted penalized least squares algorithm with spectral peak discrimination was used for baseline correction to effectively retain useful information in the feature absorption peaks. Then, the convolution smoothing algorithm was used to filter the noise, and the spectral curve smoothness was adjusted using the convolution window width. The near-infrared spectrum has a high dimension. Monte Carlo random sampling combined with an improved competitive adaptive reweighting method was used to evaluate the importance of spectral sampling points. According to the importance coefficient, the dimension of the spectral data set was optimized by using an exponential attenuation function through an iterative operation, and the data set with the smallest root-mean-square error was taken as the characteristic spectrum. The nonlinear separability of characteristic spectra was further improved by kernel principal component analysis. Finally, a liquor quality recognition model based on principal component analysis was established by using the hierarchical multiclass support vector machine method. Our key findings revealed that the prediction accuracy of the model reached 96.87% when the number of principal components was 5–12, with more than 95% of the characteristic information retained. These results demonstrated that this rapid nondestructive testing method resolved the challenge posed by relying on subjective sensory evaluation for liquor analysis. The findings provide a reliable analytical approach for studying substances with high-dimensional component characteristics. [ABSTRACT FROM AUTHOR]

3He is a splendid neutron detection material due to its high neutron reaction cross section, gaseous state, and nonelectronegative and nonpoisonous nature. With the worldwide problem of the "3He supply crisis" arising, boron-lined gaseous neutron detectors are being widely used in neutron detection to replace 3He neutron detectors. In this work, to reduce the scattering neutron background coming from the substrate of a boron-lined neutron detector in the application of neutron scattering, a new design of the boron-lined gaseous neutron detector composed of a boron-lined multichip converter and a multiwire proportional chamber was proposed. The electron drift efficiency matrix simulated by Garfield++ (Version 2023.4) and the values and positions of electron energy deposition simulated by Geant4 were obtained. The α, 7Li, and total charged particle energy deposition spectra were acquired via coupling calculations of the electron drift efficiency matrix and the values and positions of electron energy deposition, and the width of the slit was selected as 3 mm. The boron-lined multilayer converter neutron detector (BMCND) was tested using a 241Am–239Pu mixture α source, and the total count rate of α charged particles was measured as 599.5 s−1, which is 89% of the theoretical α particle emission rate of 672.9 s−1. The drift voltage experiments showed that 1200 V is enough to acquire a relatively ideal count, and a 2500 V drift voltage was confirmed, considering the higher count and instrument safety. We also performed the neutron detection experiments using a photo-neutron source, and a characteristic spectrum shape of "two stairs" was measured. When borated polyethylene was used to shield the BMCND, the detected total count decreased while keeping the characteristic spectrum shape, demonstrating that the BMCND was equipped with the ability to detect neurons, indicating that BMCNDs have the potential to be an outstanding 3He alternative neutron detector. [ABSTRACT FROM AUTHOR]

Detecting transportation pipeline leakage points within chemical plants is difficult due to complex pathways, multi-dimensional survey points, and highly dynamic scenarios. However, hexapod robots' maneuverability and adaptability make it an ideal candidate for conducting surveys across different planes. The path-planning problem of hexapod robots in multi-dimensional environments is a significant challenge, especially when identifying suitable transition points and planning shorter paths to reach survey points while traversing multi-level environments. This study proposes a Particle Swarm Optimization (PSO)-guided Double Deep Q-Network (DDQN) approach, namely, the PSO-guided DDQN (PG-DDQN) algorithm, for solving this problem. The proposed algorithm incorporates the PSO algorithm to supplant the traditional random selection strategy, and the data obtained from this guided approach are subsequently employed to train the DDQN neural network. The multi-dimensional random environment is abstracted into localized maps comprising current and next level planes. Comparative experiments were performed with PG-DDQN, standard DQN, and standard DDQN to evaluate the algorithm's performance by using multiple randomly generated localized maps. After testing each iteration, each algorithm obtained the total reward values and completion times. The results demonstrate that PG-DDQN exhibited faster convergence under an equivalent iteration count. Compared with standard DQN and standard DDQN, reductions in path-planning time of at least 33.94% and 42.60%, respectively, were observed, significantly improving the robot's mobility. Finally, the PG-DDQN algorithm was integrated with sensors onto a hexapod robot, and validation was performed through Gazebo simulations and Experiment. The results show that controlling hexapod robots by applying PG-DDQN provides valuable insights for path planning to reach transportation pipeline leakage points within chemical plants. [ABSTRACT FROM AUTHOR]

Lithium-ion batteries (LIBs) have been widely used for electric vehicles owing to their high energy density, light weight, and no memory effect. However, their health management problems remain unsolved in actual application. Therefore, this paper focuses on battery capacity as the key health indicator and proposes a data-driven method for capacity prediction. Specifically, this method mainly utilizes Convolutional Neural Network (CNN) for automatic feature extraction from raw data and combines it with the Bidirectional Long Short-Term Memory (BiLSTM) algorithm to realize the capacity prediction of LIBs. In addition, the sparrow search algorithm (SSA) is used to optimize the hyper-parameters of the neural network to further improve the prediction performance of original network structures. Ultimately, experiments with a public dataset of batteries are carried out to verify and evaluate the effectiveness of capacity prediction under two temperature conditions. The results show that the SSA-CNN-BiLSTM framework for capacity prediction of LIBs has higher accuracy compared with other original network structures during the multi-battery cycle experiments. [ABSTRACT FROM AUTHOR]

The velocity model is one of the main factors affecting the accuracy of microseismic event localization. This paper addresses the issue of the low accuracy of microseismic event localization in tunnels and, combined with active-source technology, proposes a "source–station" velocity model. The velocity model assumes that the velocity from the source to each station is different, and it can greatly improve the accuracy of the time-difference-of-arrival algorithm. At the same time, for the case of multiple active sources, the MLKNN algorithm was selected as the velocity model selection method through comparative testing. The results of numerical simulation and laboratory tests in the tunnel showed that the average location accuracy of the "source–station" velocity model was improved compared with that of the isotropic velocity and sectional velocity models, with numerical simulation experiments improving accuracy by 79.82% and 57.05% (from 13.28 m and 6.24 m to 2.68 m), and laboratory tests in the tunnel improving accuracy by 89.26% and 76.33% (from 6.61 m and 3.00 m to 0.71 m). The results of the experiments showed that the method proposed in this paper can effectively improve the location accuracy of microseismic events in tunnels. [ABSTRACT FROM AUTHOR]

Neutron imaging is an effective nondestructive testing (NDT) technique widely applied to detect structural defects and the enrichment of nuclear fuel elements due to its high penetration and nuclide-sensitive properties. Since the fuel element pellet is sealed in the cladding, the transmission imaging result is a superposition of the two parts. Therefore, the attenuation of neutrons by the cladding is interference that must be considered in the enrichment analysis. It is necessary to extract and separate cladding and pellets using an edge extraction method. However, the low neutron cross-section of the cladding material (e.g., aluminum and zirconium) leads to poor grayscale contrast at the cladding edge in the imaging result, and the intensity of the cladding edge is significantly lower than that of the pellet edge. In addition, affected by the noise from the imaging environment, the boundaries of targets are further blurred, making edge detection more challenging. Traditional detection algorithms extract the weak edges of cladding incompletely, and the results are discontinuous, with obvious edge breaks and missing areas. This paper proposes a method to extract edges in neutron images based on phase congruency (PC). This study utilized the classical perceptual field model to improve contrast at weak edges. The enriched edge map was generated using our PC model from six directions, allowing more weak edges to be detected accurately. The non-maximum suppression ensured precise localization and avoided edge breaks. Furthermore, the edge results were optimized by eliminating noise through morphological operations. The experimental results demonstrate that the proposed method effectively detects the weak edges of the cladding, is superior in accuracy and integrity to traditional detection, and is able to obtain stable and reliable results with different materials of neutron images. The edge integrity improved by 64.1%, and the edge localization accuracy reached 94.3%. The extracted edge information is useful in the next stage of the high-precision enrichment analysis. [ABSTRACT FROM AUTHOR]

In digital nuclear spectroscopy, trapezoidal shaping is widely used. Compared with traditional CR-RC4 semi-Gaussian shaping, it has a better energy resolution and higher counting rates, but does not void the pulse pile-up in the case of extreme counting rates. In this paper, a new recursive algorithm is proposed that can improve the anti-pile-up ability, and is easy to implement in any DSP-based processor that is used in any digital pulse shaping filter section. The complete deduction and simulation are presented in this paper. [ABSTRACT FROM AUTHOR]

Cs2LiYCl6: Ce3+ (CLYC) is a dual-mode gamma-neutron scintillator with a medium gamma-ray resolution and pulse-shape discrimination (PSD) capability. The PSD performance of CLYC is greatly weakened when coupled with silicon photomultipliers (SiPMs) because of SiPMs' low detection efficiency for the ultrafast Core-Valence-Luminescence (CVL) component under gamma excitation. In our previous work, the PSD Figure-of-Merit (FoM) value was optimized to 2.45 at the gamma-equivalent energy region of the thermal neutron by using the charge comparison method. However, this value was reduced to 1.37 at the lower gamma-equivalent energy region of more than 325 keV, and neutrons were difficult to distinguish from gamma rays. Hence, new algorithms should be studied to improve the PSD performance at low gamma-equivalent energy regions. Convolutional Neural Networks (CNNs) have excellent image recognition capabilities, and thus, neutron and gamma-ray waveforms can be discriminated by their characteristics through a known training set. In this study, neutron and gamma-ray waveforms were measured with a 137Cs source and moderated 252Cf source via an SiPM array-coupled CLYC detector and divided into two groups: training and PSD testing. The CNN training set comprised 137Cs characteristic gamma-ray waveforms and thermal neutron waveforms that were discriminated by the charge comparison method from the training group. A CNN with two convolution-pooling layers was designed to accomplish PSD with the test group. The PSD FoM value of the CNN method was calculated to be 37.20 at the gamma-equivalent energy region of more than 325 keV. This result was much higher than that of the charge comparison method, indicating that neutrons and gamma rays could be better distinguished with the CNN method, especially at low gamma-equivalent energy regions. [ABSTRACT FROM AUTHOR]

Quality identification of multi-component mixtures is essential for production process control. Artificial sensory evaluation is a conventional quality evaluation method of multi-component mixture, which is easily affected by human subjective factors, and its results are inaccurate and unstable. This study developed a near-infrared (NIR) spectral characteristic extraction method based on a three-dimensional analysis space and establishes a high-accuracy qualitative identification model. First, the Norris derivative filtering algorithm was used in the pre-processing of the NIR spectrum to obtain a smooth main absorption peak. Then, the third-order tensor robust principal component analysis (TRPCA) algorithm was used for characteristic extraction, which effectively reduced the dimensionality of the raw NIR spectral data. Finally, on this basis, a qualitative identification model based on support vector machines (SVM) was constructed, and the classification accuracy reached 98.94%. Therefore, it is possible to develop a non-destructive, rapid qualitative detection system based on NIR spectroscopy to mine the subtle differences between classes and to use low-dimensional characteristic wavebands to detect the quality of complex multi-component mixtures. This method can be a key component of automatic quality control in the production of multi-component products. [ABSTRACT FROM AUTHOR]

A new first break picking for three-component (3C) vertical seismic profiling (VSP) data is proposed to improve the estimation accuracy of first arrivals, which adopts gesture detection calibration and polarization analysis based on the eigenvalue of the covariance matrix. This study aims at addressing the problem that calibration is required for VSP data using the azimuth and dip angle of geophones, due to the direction of geophones being random when applied in a borehole, which will further lead to the first break picking possibly being unreliable. Initially, a gesture-measuring module is integrated in the seismometer to rapidly obtain high-precision gesture data (including azimuth and dip angle information). Using re-rotating and re-projecting using earlier gesture data, the seismic dataset of each component will be calibrated to the direction that is consistent with the vibrator shot orientation. It will promote the reliability of the original data when making each component waveform calibrated to the same virtual reference component, and the corresponding first break will also be properly adjusted. After achieving 3C data calibration, an automatic first break picking algorithm based on the autoregressive-Akaike information criterion (AR-AIC) is adopted to evaluate the first break. Furthermore, in order to enhance the accuracy of the first break picking, the polarization attributes of 3C VSP recordings is applied to constrain the scanning segment of AR-AIC picker, which uses the maximum eigenvalue calculation of the covariance matrix. The contrast results between pre-calibration and post-calibration using field data show that it can further improve the quality of the 3C VSP waveform, which is favorable to subsequent picking. Compared to the obtained short-term average to long-term average (STA/LTA) and the AR-AIC algorithm, the proposed method, combined with polarization analysis, can significantly reduce the picking error. Applications of actual field experiments have also confirmed that the proposed method may be more suitable for the first break picking of 3C VSP. Test using synthesized 3C seismic data with low SNR indicates that the first break is picked with an error between 0.75 ms and 1.5 ms. Accordingly, the proposed method can reduce the picking error for 3C VSP data., Competing Interests: The authors declare no conflict of interest.

Wireless sensor networks (WSNs) have been widely used to collect valuable information in Structural Health Monitoring (SHM) of bridges, using various sensors, such as temperature, vibration and strain sensors. Since multiple sensors are distributed on the bridge, accurate time synchronization is very important for multi-sensor data fusion and information processing. Based on shape of the bridge, a spanning tree is employed to build linear topology WSNs and achieve time synchronization in this paper. Two-way time message exchange (TTME) and maximum likelihood estimation (MLE) are employed for clock offset estimation. Multiple TTMEs are proposed to obtain a subset of TTME observations. The time out restriction and retry mechanism are employed to avoid the estimation errors that are caused by continuous clock offset and software latencies. The simulation results show that the proposed algorithm could avoid the estimation errors caused by clock drift and minimize the estimation error due to the large random variable delay jitter. The proposed algorithm is an accurate and low complexity time synchronization algorithm for bridge health monitoring.