Search

In food packaging, smart indicator films based on natural resources have greatly attracted researchers to minimize the environmental issues as well as to satisfy consumer preferences for food safety. In this research, pH-sensitive films were prepared using purple-fleshed sweet potato starch (SPS) and sweet potato peel (SPP). Two categories of the film (i) SPS and (ii) SPS/SPP, were fabricated via solvent casting technique, incorporating different concentrations of commercial purple sweet potato anthocyanin (CA) at 0%, 1%, 1.5%, and 2% (w/v) and the physicochemical, mechanical, thermal, and morphological properties of the films were investigated. The thickness, water solubility, and swelling degree of the films increased with the increment of CA, whereas there were no significant changes in the water content (WC) of the films. Water vapor permeability (WVP) was decreased for SPS films while statistically similar for SPS/SPP films. The addition of CA reduced the tensile strength (TS) and tensile modulus (TM) yet increased the elongation at break (EaB) of the films as compared to films without CA. The FTIR results confirmed the immobilization of anthocyanin into the film. In SEM images, roughness in the surfaces of the CA-associated films was observed. A reduction of thermal stability was found for the films with anthocyanin except for the SPS/SPP CA 2% film. Furthermore, the CA-associated films showed a remarkable color response when subjected to pH buffers (pH 1 to 12) and successfully monitored chicken freshness. The fastest color migration was observed in acidic conditions when the films were immersed into aqueous, acidic, low fat, and fatty food simulants. The findings of this work demonstrated that the developed pH indicator films have the potential to be implemented as smart packaging to monitor food freshness and quality for safe consumption. [ABSTRACT FROM AUTHOR]

Food packaging has seen a growth in the use of materials derived from renewable resources such as poly(lactic acid) (PLA). However, the initial costs to produce bioplastics are typically high. Tropical fruit waste as naturally sourced fibres, such as jackfruit skin, can be used as a cost-reducing filler for PLA. The main objective in this study is to fabricate a low-cost natural fibre-reinforced polymer that potentially applies in packaging with the aid of bleaching treatment. The treatment shows a rougher surface fibre in Scanning electron microscopy (SEM) micrographs and it is expected to have better mechanical locking with the matrix, and this is found similar with a Fourier-transform infrared spectroscopy (FTIR) analysis. Unfortunately, fibre insertion does find low tensile performances, yet bleached-fibre composites improved its performance significantly. A similar situation was found in the thermal characterization where a low-thermal stability natural fibre composite has lower thermal behaviour and this increased with bleaching treatment. Besides, bleached-fibre composites have a longer service period. Besides, a 15 wt% thymol insertion inhibits the growth of Gram-positive bacteria in the composites and the non-treated fibre composite has better thymol effects. The 30 wt% of the bleached-fibre insertion composite has a high potential to reduce the cost of bioplastic products with minimum alterations of overall performances. [ABSTRACT FROM AUTHOR]