Search

The water–gas shift (WGS) reaction (CO + H2O ↔ CO2 + H2) plays an important role in the hydrogen economy because it is an effective way to reduce the carbon release to net-zero CO2 emissions. The general goal of this research is to develop nanosized oxo-rhenium catalyst formulations promoted by K and Co components for the WGS process. Rhenium, as a low-cost catalyst component, is a good choice compared to platinum group metals. A surface density of 2 Re atoms/nm2 on a γ-Al2O3 support as well as cobalt (3 wt.% CoO) and potassium (5 wt.% K2O) amounts were chosen to match the composition of our own active sour WGS KCoRe catalyst developed some years ago. An initial evaluation of the impact of replacing half of the rhenium with molybdenum, which is more affordable, was also studied. The purpose of this study is to explore the catalytic ability of CoRe, K-CoRe, CoReMo, and K-CoReMo formulations in the WGS reaction and elucidate the effect of a CO/Ar reaction mixture used in an activation–reduction pretreatment to form active catalyst structures. Oxo-K-Co-Re(Mo) entities formed in synthesized samples and their reducibility were analyzed via several physicochemical methods, such as N2 physisorption, PXRD, UV-vis DRS, and H2-TPR. In summary, the selected potassium- and cobalt-promoted Re-containing formulations have potential as catalysts for the classical WGS reaction. The selection of an appropriate procedure for activation–reduction, involving the reducing gas (CO or H2), temperature, and duration, was needed for tuning the K-CoRe catalyst's high activity for the WGS reaction with structural stability and longevity. [ABSTRACT FROM AUTHOR]

Yttrium-doped barium cerate (BCY15) was used as ceramic matrix to obtain Ni/BCY15 anode cermet for application in proton-conducting solid oxide fuel cells (pSOFC). Ni/BCY15 cermets were prepared in two different types of medium, namely deionized water (W) and anhydrous ethylene glycol (EG) using wet chemical synthesis by hydrazine. An in-depth analysis of anodic nickel catalyst was made aiming to elucidate the effect of anode tablets' preparation by high temperature treatment on the resistance of metallic Ni in Ni/BCY15-W and Ni/BCY15-EG anode catalysts. On purpose reoxidation upon high-temperature treatment (1100 °C for 1 h) in air ambience was accomplished. Detailed characterization of reoxidized Ni/BCY15-W-1100 and Ni/BCY15-EG-1100 anode catalysts by means of surface and bulk analysis was performed. XPS, HRTEM, TPR, and impedance spectroscopy measurements experimentally confirmed the presence of residual metallic Ni in the anode catalyst prepared in ethylene glycol medium. These findings were evidence of strong metal Ni network resistance to oxidation in anodic Ni/BCY15-EG. Enhanced resistance of the metal Ni phase contributed to a new microstructure of the Ni/BCY15-EG-1100 anode cermet getting more stable to changes that cause degradation during operation. [ABSTRACT FROM AUTHOR]

Structured hydrotalcite NiAl-HT material with Ni/Al atomic ratio of 2.5 was prepared by co-precipitation of Ni and Al nitrate precursors and then modified by the addition of 1 wt% Ce and/or 3 wt% Au species. The obtained materials, after calcination at 600 °C, were characterized by XRD, XPS and TPR. Their catalytic performance was tested through dry reforming of methane (DRM) and by the temperature-programmed surface reaction of methane (TPSR-CH4). Thermal gravimetry analysis (TGA) of the spent catalysts was performed to determine the amount of carbon accumulated during the reaction. The effects of the addition of cerium as a support promoter and gold as nickel promoter and the sequential addition of cerium and gold on the structural properties and on the catalytic efficiency were investigated. Under the severe condition of high space velocity (600,000 mL g−1 h−1), all the catalysts were quite active, with values of CH4 conversion between 67% and 74% at 700 °C. In particular, the combination of cerium and gold enhanced the CH4 conversion up to 74%. Both additives, individually and simultaneously, enhanced the nickel dispersion with respect to the unpromoted NiAl and favored the reducibility of the nickel. During DRM all the catalysts formed graphitic carbon, contributing to their deactivation. The lower carbon gasification temperature of the promoted catalysts confirmed a positive effect played by Ce and Au in assisting the formation of an easier-to-remove carbon. The positive effect was testified by the better stability of the Ce/NiAl with respect to the other catalysts. In the gold-containing samples, this effect was neutralized by Au diffusing towards the catalyst surface during DRM, masking the nickel active sites. TPSR-CH4 test highlighted different CH4 activation capability of the catalysts. Furthermore, the comparison of the deposited carbon features (amount and removal temperature) of the DRM and TPSR spent catalysts indicated a superior activation of CO2 by the Au/Ce/NiAl, to be related to the close interaction of gold and ceria enhancing the oxygen mobility in the catalyst lattice. [ABSTRACT FROM AUTHOR]

Increased levels and detrimental effects of volatile organic compounds (VOCs) stimulate research efforts to develop catalysts with high efficiency in complete hydrocarbon oxidation. This work is focused on the complete oxidation of benzene as a probe reaction for VOCs elimination over alumina-supported CuO-CeO2 mixed oxide promoted by gold. The benzene molecule is the most stable among the aromatic hydrocarbons with toxic and often carcinogenic effects known as BTEX (benzene, toluene, ethylbenzene, and xylenes) owing to the symmetry and stability of the benzene ring. Use of low-cost materials as support is an appropriate strategy aimed at improving catalyst economic profitability. The effect of the Cu-Ce ratio, namely 2:1 and 1:5, and the role of supported gold in the catalyst performance were evaluated. Analysis of the impact of support composition in benzene oxidation was based on sample characterization by textural measurements, PXRD, EPR spectroscopy, and the TPR technique. Special attention was paid to the disturbed symmetry of the ceria crystallographic structure by defects formation and its implication for the catalytic activity. Gold on alumina-supported binary oxide catalysts exhibited a significantly higher activity than promoted supported monometallic oxides. The best performance of the Au/Cu-Ce 1:5 sample was related to the highest concentration of paramagnetic Cu2+ ions and the best copper species dispersion evidenced by PXRD, EPR, and TPR results. The catalyst achieved stable total oxidation to CO2 and water by 94% benzene conversion at 250 °C, thus implying the potential of this composition in developing efficient catalytic materials for atmospheric pollutant abatement. [ABSTRACT FROM AUTHOR]

Formaldehyde (HCHO) is recognized as one of the most emitted indoor air pollutants with high detrimental effect on human health. Significant research efforts are focused on HCHO removal to meet emission regulations in an effective and economically profitable way. For over three decades, the unique electronic properties and catalytic abilities of nano-gold catalysts continue to be an attractive research area for the catalytic community. Recently, we reported that mechanochemical mixing is a relevant approach to the preparation of Co-Ce mixed oxides with high activity in complete benzene oxidation. A trend of higher surface defectiveness, in particular, oxygen vacancies, caused by close interaction between cobalt oxide and cerium oxide phases, was observed for a mixed oxide composition of 70 wt.% Co3O4 and 30 wt.% CeO2. These results directed further improvement by promotion with gold and optimization of mixed oxide composition, aiming for the development of an efficient catalyst for room temperature HCHO abatement. Support modification with potassium was studied; however, the K addition caused less enhancement of HCHO oxidation activity than expected. This motivated the preparation of new carrier material. In addition to Co3O4-CeO2 mixed metal oxides with preset ratio, γ-Al2O3 intentionally containing 33% boehmite and shortly named Al2O3-b was used for synthesis. Analysis of the role of support composition in HCHO oxidation was based on the characterization of nano-gold catalysts by textural measurements, XRD, HRTEM, XPS, and TPR techniques. Gold supported on mechanochemically treated Co3O4-CeO2-Al2O3-b (50 wt.% Al2O3-b) exhibited superior activity owing to high Ce3+ and Co3+ surface amounts and the most abundant oxygen containing species with enhanced mobility. This catalyst achieved oxidation to CO2 and H2O by 95% HCHO conversion at room temperature and 100% at 40 °C, thus implying the potential of this composition in developing efficient catalytic materials for indoor air purification. [ABSTRACT FROM AUTHOR]

Featured Application: Design of well performing and cost-effective mono and bimetallic Pd—Au catalysts for complete benzene oxidation. The protection of environment and human health stimulates intensive research for abatement of volatile organic compounds (VOCs) in the atmosphere. Complete catalytic oxidation is an efficient, environmentally friendly and economically feasible method for elimination of VOCs. This study aims to design high performing and cost-effective catalytic formulations by exploration of appropriate and economically viable supports. Alumina-supported ceria (30 wt.%) and Y2O3 (1 wt.%)-doped ceria were prepared by mechanical mixing and were used as support of mono Au (2 wt.%) and Pd (1 wt.%) and bimetallic Pd-Au catalysts. The characterization by textural measurements, X-ray powder diffraction (PXRD), X-ray photoelectron spectroscopy (XPS), EPR (electron paramagnetic resonance) and temperature-programmed reduction (TPR) was carried out in order to clarify the relationship between catalyst composition, textural, structural and surface properties, reducibility and catalytic performance for complete benzene oxidation. Among all studied catalysts, Pd-based catalysts exhibited the best combustion activity. In particular, monometallic Pd on alumina supported Y-doped ceria attained 100% of complete benzene conversion at 180 °C. These catalytic materials have potential to meet stringent emission regulations in an economical and effective way. [ABSTRACT FROM AUTHOR]

Gold (3 wt. %) catalysts on Y-doped (1, 2.5, 5 and 7.5 wt. % Y2O3) ceria supports prepared by coprecipitation (CP) or impregnation (IM) were studied in complete benzene oxidation (CBO). A low-extent Y modification was chosen to avoid ordering of oxygen vacancies. The samples were characterized by XRD, TGA, XPS and TPR techniques. A positive role of air pretreatment at 350 °C as compared to 200 °C was established for all Y-containing catalysts and it was explained by cleaning the active sites from carbonates. The oxygen supply cannot be considered as a limiting step for benzene oxidation except for the high 7.5%-doped samples, as suggested by TGA and TPR data. On the basis of XPS results of fresh and used in CBO catalysts, the presence of cationic gold species does not seem important for high CBO activity. The gold catalyst on an IM support with 1% Y-doping exhibited the best performance. A 100% benzene conversion was achieved only over this catalyst and Au/ceria, while it was not reached even at 300 °C over all other studied catalysts. Gold and ceria particle agglomeration or coke formation should be excluded as a possible reason, and the most probable explanation could be associated with the importance of the benzene activation stage. [ABSTRACT FROM AUTHOR]

Considerable efforts to reduce the harmful emissions of volatile organic compounds (VOCs) have been directed towards the development of highly active and economically viable catalytic materials for complete hydrocarbon oxidation. The present study is focused on the complete benzene oxidation as a probe reaction for VOCs abatement over Co3O4-CeO2 mixed oxides (20, 30, and 40 wt.% of ceria) synthesized by the more sustainable, in terms of less waste, less energy and less hazard, mechanochemical mixing of cerium hydroxide and cobalt hydroxycarbonate precursors. The catalysts were characterized by BET, powder XRD, H2-TPR, UV resonance Raman spectroscopy, and XPS techniques. The mixed oxides exhibited superior catalytic activity in comparison with Co3O4, thus, confirming the promotional role of ceria. The close interaction between Co3O4 and CeO2 phases, induced by mechanochemical treatment, led to strained Co3O4 and CeO2 surface structures. The most significant surface defectiveness was attained for 70 wt.% Co3O4-30 wt.% CeO2. A trend of the highest surface amount of Co3+, Ce3+ and adsorbed oxygen species was evidenced for the sample with this optimal composition. The catalyst exhibited the best performance and 100% benzene conversion was reached at 200 °C (relatively low temperature for noble metal-free oxide catalysts). The catalytic activity at 200 °C was stable without any products of incomplete benzene oxidation. The results showed promising catalytic properties for effective VOCs elimination over low-cost Co3O4-CeO2 mixed oxides synthesized by simple and eco-friendly mechanochemical mixing. [ABSTRACT FROM AUTHOR]

Supported gold on co-precipitated nanosized NiAl layered double hydroxides (LDHs) was studied as an effective catalyst for medium-temperature water–gas shift (WGS) reaction, an industrial catalytic process traditionally applied for the reduction in the amount of CO in the synthesis gas and production of pure hydrogen. The motivation of the present study was to improve the performance of the Au/NiAl catalyst via modification by CeO2. An innovative approach for the direct deposition of ceria (1, 3 or 5 wt.%) on NiAl-LDH, based on the precipitation of Ce3+ ions with 1M NaOH, was developed. The proposed method allows us to obtain the CeO2 phase and to preserve the NiAl layered structure by avoiding the calcination treatment. The synthesis of Au-containing samples was performed through the deposition–precipitation method. The as-prepared and WGS-tested samples were characterized by X-ray powder diffraction, N2-physisorption and X-ray photoelectron spectroscopy in order to clarify the effects of Au and CeO2 loading on the structure, phase composition, textural and electronic properties and activity of the catalysts. The reduction behavior of the studied samples was evaluated by temperature-programmed reduction. The WGS performance of Au/NiAl catalysts was significantly affected by the addition of CeO2. A favorable role of ceria was revealed by comparison of CO conversion degree at 220 °C reached by 3 wt.% CeO2-modified and ceria-free Au/NiAl samples (98.8 and 83.4%, respectively). It can be stated that tuning the properties of Au/NiAl LDH via CeO2 addition offers catalysts with possibilities for practical application owing to innovative synthesis and improved WGS performance. [ABSTRACT FROM AUTHOR]

The water-gas shift (WGS) reaction is a well-known industrial process used for the production of hydrogen. During the last few decades, it has attracted renewed attention due to the need for high-purity hydrogen for fuel-cell processing systems. The aim of the present study was to develop a cost-effective and catalytically efficient formulation that combined the advantageous properties of transition metal oxides and gold nanoparticles. Alumina-supported copper- manganese mixed oxides were prepared by wet impregnation. The deposition-precipitation method was used for the synthesis of gold catalysts. The effect of the Cu:Mn molar ratio and the role of Au addition on the WGS reaction's performance was evaluated. Considerable emphasis was put on the characterization of the as-prepared and WGS-tested samples by means of a number of physicochemical methods (X-ray powder diffraction, high-resolution transmission electron microscopy, electron paramagnetic resonance, X-ray photoelectron spectroscopy, and temperature-programmed reduction) in order to explain the relationship between the structure and the reductive and WGS behavior. Catalytic tests revealed the promotional effect of gold addition. The best performance of the gold-promoted sample with a higher Cu content, i.e., a Cu:Mn molar ratio of 2:1 might be related to the beneficial role of Au on the spinel decomposition and the highly dispersed copper particle formation during the reaction, thus, ensuring the presence of two highly dispersed active metallic phases. High-surface-area alumina that was modified with a surface fraction of Cu–Mn mixed oxides favored the stabilization of finely dispersed gold particles. These new catalytic systems are very promising for practical applications due to their economic viability because the composition mainly includes alumina (80%). [ABSTRACT FROM AUTHOR]

Mono metallic and bimetallic Pd (1 wt. %)–Au (3 wt. %) catalysts were prepared using two ceria supports doped with 1 wt. % Y2O3. Yttrium was added by impregnation or co-precipitation. The catalyst synthesis was carried out by deposition–precipitation method, with sequential deposition–precipitation of palladium over previously loaded gold in the case of the bimetallic samples. The obtained materials, characterized by X-ray powder diffraction (XRD), High resolution transmission electron microscopy (HRTEM), X-ray photoelectron spectroscopy (XPS), and temperature programmed reduction (TPR) techniques, were tested in the complete benzene oxidation (CBO). The results of the characterization analyses and the catalytic performance pointed to a close relationship between structural, redox, and catalytic properties of mono and bimetallic catalysts. Among the monometallic systems, Pd catalysts were more active as compared to the corresponding Au catalysts. The bimetallic systems exhibited the best combustion activity. In particular, over Pd–Au supported on Y-impregnated ceria, 100% of benzene conversion towards total oxidation at the temperature of 150 °C was obtained. Comparison of surface sensitive XPS results of fresh and spent catalysts ascertained the redox character of the reaction. [ABSTRACT FROM AUTHOR]