Search

The deep geological repository (DGR) system has been selected by most of the world's nuclear waste management organizations for the long-term disposal of radioactive wastes. The DGR mainly consists of a multi-barrier system—comprising the natural host rock and an engineered barrier system—to contain and isolate high-level radioactive waste, including used fuel containers (UFCs), to protect humans and the environment. Bentonite materials and host rock are the main components of the DGR's engineered and natural barrier system, respectively. It is crucial to understand the coupled behavior of bentonite and rock materials under various in situ conditions over long-term durations, as it supports safety assessments and enhances the overall safety level of DGR systems. This study presents a methodology for the numerical modeling of a hypothetical DGR using developed coupled models. The developed model was used to investigate the hydromechanical (HM) and thermomechanical (TM) response within the near-field (the area within a radius of 50 m near the UFC and multiple-barrier system) of a simplified hypothetical DGR, based on the proposed design concept of the Nuclear Waste Management Organization (NWMO) of Canada. The analysis results included the evolution of temperature, thermal stresses, saturation, and swelling pressure at different stages of the DGR system's lifetime. The results indicated that it could take up to 10,000 years to fully saturate the bentonite materials with a corresponding swelling pressure of 2.7 MPa associated with a decrease in the rock's strength/stress ratio near the placement room; however, the ratio did not indicate a significant system failure. Sensitivity analysis was also conducted to assess the impact of various parameters on the saturation time and the strength/stress ratio in a DGR. The results highlighted that saturation time was highly influenced by the permeability of both the rock formation and the bentonite, resulting in saturation times ranging from 500 to 20,000 years. Moreover, the strength/stress ratio was found to be sensitive to the model's parameters, particularly the maximum swelling pressure. The results of the TM analysis show that temperature development around the placement of rooms in a DGR is highly influenced by room spacing, with a lower factor of safety (FOS) as time and temperature progressed due to elevated temperature, while the rock remained stable over the 150-year analysis period. The inclusion of temperature-dependent mechanical properties produced negligible changes to the overall stability of the rock around the placement rooms of the DGR. [ABSTRACT FROM AUTHOR]

Expansive clays present serious issues in a variety of engineering applications, including roadways, light buildings, and infrastructure, because of their notable volume changes with varying moisture content. Tough weather conditions can lead to drying and shrinking, which alters expansive clays' hydro-mechanical properties and results in cracking. The hydro-mechanical behavior of Al-Ghatt expansive clay and the impact of wetting and drying cycles on the formation of surface cracks are addressed in this investigation. For four cycles of wetting and drying and three vertical stress levels, i.e., 50 kPa, 100 kPa, and 200 kPa, were investigated. The sizes and patterns of cracks were observed and classified. A simplified classification based on main track and secondary branch tracks is introduced. The vertical strain measure at each cycle, which showed swell and shrinkage, was plotted. The hydromechanical behavior of the clay, which corresponds to three levels of overburden stress as indicated by its swell potential and hydraulic conductivity was observed. It was found that at low overburden stresses of 50 kPa, the shrinkage is high and drops with increasing the number of cycles. Al-Ghatt clay's tendency to crack is significantly reduced or eliminated by the 200 kPa overburden pressure. The results of this work can be used to calculate the depth of a foundation and the amount of partial soil replacement that is needed. [ABSTRACT FROM AUTHOR]

Clayey soils exhibit significant volumetric changes in response to variations in water content. The swelling pressure of clayey soils is a critical parameter for evaluating the stability and performance of structures built on them, facilitating the development of appropriate design methodologies and mitigation strategies to ensure their long-term integrity and safety. We present a dataset comprising maximum swelling pressure values from 759 compacted soil samples, compiled from 16 articles published between 1994 and 2022. The dataset is classified into two main groups: 463 samples of natural clays and 296 samples of bentonite and bentonite mixtures, providing data on various types of soils and their properties. Different swelling test methods, including zero swelling, swell consolidation, restrained swell, double oedometer, free swelling, constant volume oedometer, UPC isochoric cell, isochoric oedometer and consolidometer, were employed to measure the maximum swelling pressure. The comprehensive nature of the dataset enhances its applicability for geotechnical projects. The dataset is a valuable resource for understanding the complex interactions between soil properties and swelling behavior, contributing to advancements in soil mechanics and geotechnical engineering. [ABSTRACT FROM AUTHOR]

Expansive soils pose significant challenges to structural integrity, primarily due to volumetric changes that can lead to detrimental consequences and substantial economic losses. This study delves into the intricate dynamics of expansive soils through loaded swelling pressure experiments conducted under diverse conditions, encompassing variations in the sand content, initial dry unit weight, and initial degree of saturation. The findings underscore the pronounced influence of these factors on soil swelling. To address these challenges, a novel method leveraging machine learning prediction models is introduced, offering an efficient and cost-effective framework to mitigate potential hazards associated with expansive soils. Employing advanced algorithms such as decision tree regression (DTR), random forest regression (RFR), gradient boosting regression (GBR), extreme gradient boosting (XGBoost), support vector regression (SVR), and artificial neural networks (ANN) in the Python software 3.11 environment, this study aims to predict the optimal applied stress and dry unit weight required for soil swelling mitigation. Results reveal that XGBoost and ANN stand out for their precision and superior metrics. While both performed well, ANN demonstrated exceptional consistency across training and testing phases, making it the preferred choice. In the tested dataset, ANN achieved the highest R-squared values (0.9917 and 0.9954), lowest RMSE (7.92 and 0.086), and lowest MAE (5.872 and 0.0488) for predicting optimal applied stress and dry unit weight, respectively. [ABSTRACT FROM AUTHOR]

Bamboo is a plant with various applications. As a natural, renewable material that exhibits good mechanical performance, it seems to be an interesting alternative to wood, which has become a scarce and expensive commodity. However, comprehensive knowledge of its properties is necessary to maximise its potential for various industrial purposes. The swelling behaviour of bamboo is one of the features that has not yet been sufficiently investigated. Therefore, in this research, we aimed to measure and analyse the swelling pressure and kinetics of bamboo blocks. The results show that similar to wood, the swelling kinetics of bamboo depend on its density: the denser the tissue, the higher the maximum swelling value recorded. The maximum tangential swelling measured was about 5%–6%, which is lower than the value for the most commonly used wood species. Swelling pressure ranged from 1.16 MPa to 1.39 MPa, depending on the bamboo density: the denser the sample, the shorter the time required to reach maximum swelling pressure. Like in wood, the smallest linear increase in size due to swelling was observed in the longitudinal direction (0.71%). However, opposite to wood, more pronounced swelling was recorded in the radial direction (over 7%) than in the tangential direction (nearly 6%). The results show that bamboo's swelling behaviour makes it a good material for use in variable humidity conditions, being more favourable than the unmodified wood of many species. [ABSTRACT FROM AUTHOR]

The findings revealed that the addition of nanoalginate and lime had distinct effects on various soil properties. Specifically, the liquid limit (LL) and plastic limit (PL) decreased when sodium nanoalginate and lime were added, while the plasticity index (PI) and shrinkage limit (SL) increased. Furthermore, the soil classification was altered when sodium alginate and lime were introduced to the control soil. Regarding the standard Proctor test, it was observed that adding sodium nanoalginate increased the maximum dry density and reduced the optimal moisture content, whereas lime had the opposite effect by decreasing the maximum dry density and increasing the optimal moisture content. The free swelling and swelling pressure tests indicated that the incorporation of sodium nanoalginate and lime reduced both free swelling and swelling pressure. The most significant reduction was observed in the sample containing 7% sodium nanoalginate and 5% lime. Additionally, the study highlighted the influence of processing time, showing that an increase in the curing time led to a decrease in free swelling and swelling pressure in samples mixed with 3% sodium nanoalginate and lime. The XRD test showed that adding sodium nanoalginate reduced primary minerals, forming SAH, while lime reduced quartz and calcite, creating CSH. Overall, the results suggest that sodium nanoalginate can be a more environmentally friendly alternative to lime for soil stabilization projects. [ABSTRACT FROM AUTHOR]

A typical deep geological repository (DGR) design consists of a multi-barrier system, including the natural host rock and the engineered barrier system. Understanding the swelling behavior of bentonite-based sealing materials (BBSM), as a candidate material for the engineered barrier system, is crucial for DGR's long-term safety. In this study, a hydromechanical (HM) column-type test was designed to model the hydration of BBSM from the underground water and determine the resulting swelling pressure in vertical and radial directions. Five hydration tests were carried out on identical compacted samples of 70% bentonite and 30% sand (70-30 bentonite-sand) mixtures with a dry density of 1.65 g/cm3 for varied durations of hydration, between 1 day and 120 days. The experiments were performed parallel to the compaction direction. Following each HM column-type test, the advancement of the wetting front was determined for each test. After 120 days, 56,339 mm3 of water infiltrated the sample and the wetting front reached over 50% of the sample height. The evolution of axial swelling pressure revealed an initial increase in swelling pressure with time in all tests, followed by a reduction in the rate at later times. After early stages of swelling, radial sensors showed an increase in swelling pressure. After 120 days, the radial pressure sensor closest to the hydration front showed 52% more radial pressure than the axial swelling pressure. [ABSTRACT FROM AUTHOR]

Phyllite soil and red clay belong to the soils that negatively impact the engineering performance of railway subgrade and may cause subgrade bulges, uneven subgrade settlement, and other subgrade distresses. In order to make full use of these two soils, a collaborative improvement plan was proposed. A series of tests were conducted to analyze the synergistic effects of lime and red clay on the improvement of phyllite soil. The tests included the no loading swelling ratio, swelling pressure, consolidation, and direct shear tests. Additionally, scanning electron microscopy was used to investigate the role of lime and red clay in soil improvement. The test results show that a red clay ratio of 60% + lime content of 3% is the optimal composite improvement scheme. The scheme led to a 93% reduction in the no loading swelling ratio and an 88% reduction in swelling pressure. Additionally, cohesion, the internal friction angle, and the compression modulus increased by 345%, 73%, and 373%. Red clay and lime had weak synergistic improvement effects on the no loading swelling ratio, the swelling pressure, and the internal friction angle of phyllite soil, that is, the synergistic improvement effect of red clay and lime was less than the sum of the single improvement effect but greater than the single improvement effect. Red clay and lime had a strong synergistic improvement effect on the cohesion and the compression modulus of phyllite, that is, the synergistic improvement effect of red clay and lime was greater than the sum of the single improvement effect. The microstructure analysis test results show that red clay can fill the pores of phyllite soil and improve its immediate strength. Through hardening and cementation, lime can enhance the strength of phyllite soil as well as address the issue of the reduced engineering properties of phyllite soil and red clay when exposed to water. Red clay and lime promote each other's reactions and have a synergistic improvement effect on phyllite soil. [ABSTRACT FROM AUTHOR]

The swelling pressure of bentonite changes dramatically due to diffused nuclear radiation heat and underground osmosis, causing the failure of the buffer isolation layer in deep geological repositories for the disposal of high-level radioactive waste. A detailed overview of the relevant research results on the swelling pressure variation of bentonite under thermo-chemical effects is presented in this paper. The results showed that the values of the swelling pressure obtained by different test methods are dissimilar. The swelling pressure of bentonite decreased with the increasing pore solution concentration; nevertheless, the effect of temperature on the swelling pressure is still controversial. At the micro-level, crystal layer swelling and double- layer swelling are generally considered to be the main factors affecting the swelling pressure; the pore structure and water distribution of bentonite will change owing to thermo-chemical effects. At the macro-level, involving intergranular stress, a mechanical parameter was proposed to explain the mechanism of the changes in the swelling pressure of bentonite. Finally, future research directions for the study of the evolution of bentonite swelling properties under thermo-chemical effects are proposed, based on the current research results. [ABSTRACT FROM AUTHOR]

Swelling soil leads to many types of constructional damages, deformations, and failures in the constructions' roads, shoulders, and foundations. Depending on the amount of swell, they can be insignificant, moderate, or massive. This paper presents a method for swelling soil stabilization by adding rice husk powder (RHP) in variable percentages of 0, 5, 10, 15, 20, and 25 by weight of dry soil. The properties of swelling soil stabilization were investigated by various lab tests such as consistency limits (plastic limit, liquid limit, and plasticity index), swelling potential, swelling pressure, free swelling, and free swell index. The swelling soil was also mineralogically examined using X-ray diffraction of clay mineralogy. This stabilization reduced the plasticity from 56% (extremely high plasticity) to 4.5% (low plasticity). Swelling potential (S) and swelling pressure (SP) decreased by 48% to 45.5, 44.7, and 34.6%, from 1003 kN/m2 to 800, 653, and 489 kN/m2 for the partial replacement of the soil by 5%, 10%, and 15% RHP, respectively. The results show that the present approach is very efficient for improving the swelling soil properties and that the optimal amount of added RHP of the swelling soil is 15%. It will also be a database aimed at reducing construction risks in the future. [ABSTRACT FROM AUTHOR]

Featured Application: Adopting enzyme induced calcite precipitation technique to reduce swell, permeability and contaminant remediation of soils. Soil treatment methods to cope with ever-growing demands of construction industry and environmental aspects are always explored for their suitability in different in-situ conditions. Of late, enzyme induced calcite precipitation (EICP) is gaining importance as a reliable technique to improve soil properties and for contaminant remediation scenarios. In the present work, swelling and permeability characteristics of two native Indian cohesive soils (Black and Red) are explored. Experiments on the sorption and desorption of multiple heavy metals (Cd, Ni and Pb) onto these soils were conducted to understand the sorptive response of the heavy metals. To improve the heavy metal retention capacity and enhance swelling and permeability characteristics, the selected soils were treated with different enzyme solutions. The results revealed that EICP technique could immobilize the heavy metals in selected soils to a significant level and reduce the swelling and permeability. This technique is contaminant selective and performance varies with the nature and type of heavy metal used. Citric acid (C6H8O7) and ethylene diamine tetra-acetic acid (EDTA) were used as extractants in the present study to study the desorption response of heavy metals for different EICP conditions. The results indicate that calcium carbonate (CaCO3) precipitate deposited in the voids of soil has the innate potential in reducing the permeability of soil up to 47-fold and swelling pressure by 4-fold at the end of 21 days of curing period. Reduction in permeability and swell, following EICP treatment can be maintained with one time rinsing of the treated soil in water to avoid dissolution of precipitated CaCO3. Outcomes of this study have revealed that EICP technique can be adopted on selected native soils to reduce swelling and permeability characteristics followed by enhanced contaminant remediation enabling their potential as excellent landfill liner materials. [ABSTRACT FROM AUTHOR]

Bentonites are considered to be the most suitable materials for the multibarrier system of high-level radioactive waste repositories. Since BCV bentonite has been proved to be an ideal representative of Czech Ca-Mg bentonites in this respect, it has been included in the Czech Radioactive Waste Repository Authority (SÚRAO) buffer and backfill R&D programme. Detailed knowledge of processes in the material induced by thermal loading provides invaluable assistance regarding the evolution of the material under repository conditions. Samples of both original BCV 2017 bentonite and the same material thermally treated at 200 °C were characterised by means of chemical analysis, powder X-ray diffraction, infrared spectroscopy, thermal analysis, cation exchange capacity, specific surface area (BET) measurements, the determination of the swell index, the liquid limit, the swelling pressure and water retention curves. The smectite in BCV 2017 bentonite comprises Ca-Mg montmorillonite with a significant degree of Fe3+ substitution in the octahedral sheet. Two main transformation processes were observed following heating at 200 °C over 27 months, the first of which comprised the dehydration of the montmorillonite and the subsequent reduction of the 001 basal distance from 14.5 Å (the original BCV 2017) to 9.8 Å, thus indicating the absence of water molecules in the interlayer space. The second concerned the dehydration and partial dehydroxylation of goethite. With the exception of the dehydration of the interlayer space, the PXRD and FTIR study revealed the crystallochemical stability of the montmorillonite in BCV 2017 bentonite under the selected experimental conditions. The geotechnical tests indicated no major changes in the mechanical properties of the thermally treated BCV 2017 bentonite, as demonstrated by the similar swelling pressure values. However, the variation in the swell index and the gradual increase in the liquid limit with the wetting time indicated a lower hydration rate. The retention curves consistently showed the lower retention capacity of the thermally treated samples, thus indicating the incomplete re-hydration of the thermally treated BCV 2017 exposed to air humidity and the difference in its behaviour compared to the material exposed to liquid water. [ABSTRACT FROM AUTHOR]

Bentonites from the 10th Khutor deposit (Republic of Khakassia, Russia) are considered a potential buffer material for isolation of radioactive waste in the crystalline rocks of Yeniseyskiy site (Krasnoyarskiy region). This study presents the results of a series of permeameter experiments with bentonite compacted to dry densities of 1.4, 1.6, and 1.8 g/cm3, saturated and permeated by the artificial groundwater from Yeniseyskiy Site. Permeation was conducted at hydraulic gradients of 180–80,000 m/m to simulate potential hydraulic conditions in the early post-closure phase of a deep geological repository (DGR). The respective swelling pressures of 0.8 ± 0.3, 2.2 ± 0.6, and 6.3 ± 0.3 MPa and permeabilities of (27 ± 15) × 10−20, (3.4 ± 0.8) × 10−20, and (0.96 ± 0.26) × 10−20 m2 were observed for the hydraulic gradient of 2000 m/m, which is recommended for the determination of undisturbed swelling pressures and permeabilities in permeameter experiments. Upon incremental increases in the hydraulic gradient, swelling pressures at all densities and permeability at the density of 1.8 g/cm3 remained unchanged, whereas permeabilities at 1.4 and 1.6 g/cm3 decreased overall by a factor of approximately 5 and 1.7, respectively. Seepage-induced consolidation and/or reorganisation of bentonite microstructure are considered possible reasons for these decreases. [ABSTRACT FROM AUTHOR]

Considering the relevance of clay mineral-bearing geomaterials in landslide/mass movement hazard assessment, various engineering projects for resource development, and stability evaluation of underground space utilization, it is important to understand the permeability of these clay mineral-based geomaterials. However, only a few quantitative data have been reported to date regarding the effects of the clay mineral type and hydraulic gradient on the permeability of clay mineral materials. This study was conducted to investigate the permeability of clay mineral materials based on the clay mineral type, under different hydraulic gradient conditions, through a constant-pressure permeability test. Comparative tests have revealed that the difference in the types of clay mineral influences the swelling pressure and hydraulic conductivity. In addition, it has been found that the difference in water pressure (hydraulic gradient) affects the hydraulic conductivity of clay mineral materials. The hydraulic conductivity has been found to be closely associated with the specific surface area of the clay mineral material. Furthermore, the hydraulic conductivity value measured is almost consistent with the value calculated theoretically using the Kozeny–Carman equation. Moreover, the hydraulic conductivity is also found to be closely associated with the hydrogen energy, calculated from the consistency index of clay. This result suggests that the hydraulic conductivity of clay mineral materials can be estimated based on the specific surface area and void ratio, or consistency index of clay. [ABSTRACT FROM AUTHOR]

Superabsorbent polymers (SAPs) are used in agriculture and environmental engineering to increase soil water retention. Under such conditions, the swelling pressure of the SAP in soil affects water absorption by SAP, and soil structure. The paper presents the results of swelling pressure of three cross-linked copolymers of acrylamide and potassium acrylate mixed at the ratios of 0.3%, 0.5% and 1.0% with coarse sand and loamy sand. The highest values of swelling pressure were obtained for the 1% proportion, for coarse sand (79.53 kPa) and loamy sand (78.23 kPa). The time required to reach 90% of swelling pressure for each type of SAP differs. Samples of coarse sand mixed with SAP K2 in all concentrations reached 90% of total swelling pressure in 100 min, while the loamy sand mixtures needed only about 60 min. The results were the basis for developing a model for swelling pressure of the superabsorbent and soil mixtures, which is a fully stochastic model. The conducted research demonstrated that the course of pressure increase depends on the available pore capacity and the grain size distribution of SAPs. The obtained results and the proposed model may be applied everywhere where mixtures of SAPs and soils are used to improve plant vegetation conditions. [ABSTRACT FROM AUTHOR]

Despite the importance of cell wall diffusion to nearly all aspects of wood utilization, diffusion mechanisms and the detailed effects of moisture remain poorly understood. In this perspective, we introduce and employ approaches established in polymer science to develop a phenomenological framework for understanding the effects of moisture on diffusion in unmodified wood cell walls. The premise for applying this polymer-science-based approach to wood is that wood polymers (cellulose, hemicelluloses, and lignin) behave like typical solid polymers. Therefore, the movement of chemicals through wood cell walls is a diffusion process through a solid polymer, which is in contrast to previous assertions that transport of some chemicals occurs via aqueous pathways in the cell wall layers. Diffusion in polymers depends on the interrelations between free volume in the polymer matrix, molecular motions of the polymer, diffusant dimensions, and solubility of the diffusant in the polymer matrix. Because diffusion strongly depends on whether a polymer is in a rigid glassy state or soft rubbery state, it is important to understand glass transitions in the amorphous wood polymers. Through a review and analysis of available literature, we conclude that in wood both lignin and the amorphous polysaccharides very likely have glass transitions. After developing and presenting this polymer-science-based perspective of diffusion through unmodified wood cell walls, suggested directions for future research are discussed. A key consideration is that a large difference between diffusion through wood polymers and typical polymers is the high swelling pressures that can develop in unmodified wood cell walls. This pressure likely arises from the hierarchical structure of wood and should be taken into consideration in the development of predictive models for diffusion in unmodified wood cell walls. [ABSTRACT FROM AUTHOR]

Wood, a complex hierarchical material, continues to be widely used as a resource to meet humankind's material needs, in addition to providing inspiration for the development of new biomimetic materials. However, for wood to meet its full potential, researchers must overcome the challenge of understanding its fundamental moisture-related properties across its many levels of hierarchy spanning from the molecular scale up to the bulk wood level. In this perspective, a review of recent research on wood moisture-induced swelling and shrinking is presented from the molecular level to the cellular scale. Numerous aspects of swelling and shrinking in wood remain poorly understood, sub-cellular phenomena in particular, because it can be difficult to study them experimentally. Here, we discuss recent research endeavors at each of the relevant length scales, including the molecular, cellulose elementary fibril, secondary cell wall layer nanostructure, cell wall, cell, and cellular levels. At each length scale, we provide a discussion on the current knowledge and suggestions for future research. The potential impacts of moisture-induced swelling pressures on experimental observations of swelling and shrinking in wood at different length scales are also recognized and discussed. [ABSTRACT FROM AUTHOR]

Expansive soil shows dual swell–shrink which is not suitable for construction. Several mitigating techniques exist to counteract the problem promulgated by expansive clayey soils. This paper explored the potential mecho-chemical reinforcement of expansive clayey soil to mitigate the effect of upward swelling pressure and heave. The polypropylene fiber is randomly distributed in the soil for mechanical stabilization, and the industrial residual silica fume is used as a chemical stabilizer. The experimental analysis was made in three phases which involved tests on mechanically-reinforced expansive soil, using randomly distributed polypropylene fibers with different percentages (0.25%, 0.50%, and 1.00%), and which were 12 mm length. The second phase of experiments was carried out on chemical stabilized expansive soil with different percentages (2%, 4%, and 8%) of silica, and the next phase of the experiment focused on the combination of mecho-chemical stabilization of the expansive soil with different combinations of silica (i.e., 2%, 4%, and 8%) and polypropylene fibers (i.e., 0.25%, 0.50%, and 1.00%). Maximum dry density (MDD), optimum moisture content (OMC), liquid limit (LL), plastic limit (PL), plastic index (PI), grain size, and constant volume swelling pressure tests were performed on unreinforced and reinforced expansive soil, to investigate the effects of polypropylene fiber and silica fume on the engineering properties of expansive clayey soil. The experimental results illustrate that the inclusion of polypropylene fiber has a significant effect on the upward swelling pressure and expansion property of expansive soil. The reduction in the upward swelling pressure and expansion is a function of fiber content. These results also indicated that the use of silica fume caused a reduction in upward swelling potential, and its effect was considerably more than the influence of fiber. [ABSTRACT FROM AUTHOR]