Search

In order to solve the problem of conventional energy shortages, a non-resonant impact piezoelectric energy capture device using a (polyvinylidene fluoride) piezoelectric film at low frequency is proposed, and related theoretical analysis and experimental studies are conducted. The device has a simple internal structure, is green and easy to miniaturize, and is capable of harvesting energy at low frequencies to supply energy to micro and small electronic devices. First, to verify the feasibility of the device, the structure of the experimental device is modeled and dynamically analyzed. Then the modal, stress–strain, and output voltage of the piezoelectric film are simulated and analyzed using COMSOL Multiphysics simulation software. Finally, the experimental prototype is built according to the model, and the experimental platform is constructed to test the relevant performance. The experimental results show that the output power produced by the capturer varies within a certain range when the capturer is excited externally. With an external excitation force of 30 N, a piezoelectric film bending amplitude of 60°, and a piezoelectric film size of 45 × 80 mm, the resulting output power voltage is 21.69 V, the output current is 0.07 mA, and the output power is 1.5176 mW. This experiment verifies the feasibility of the energy capturer and provides a new idea for powering electronic components. [ABSTRACT FROM AUTHOR]

Fiber-reinforced flexible pipes are subjected to large axial tension loads in deep-water applications, which may result in the excessive deformation of the pipes. Owing to the anisotropy of the composite materials, accurately describing the tensile behavior of these pipes is difficult. Theoretical, numerical, and experimental methods are employed in this study to investigate the mechanical characteristics of a glass fiber-reinforced unbonded flexible pipe under axial tensile loads. Based on the load–strain relationship of each pipe layer, analytical equations considering the effect of anisotropy and radial deformation are first proposed to calculate the axial tensile stiffness of the pipe. A detailed numerical model is established to simulate the tensile behavior of the pipe. A prototype test is performed on a 4500 mm long sample using a tensile testing machine. The leading roles of outer tensile reinforcement layers in axial tensile capacity are illustrated by the strain energy of the pipe layers obtained by the numerical model. Subsequently, a comparison analysis of the mean fiber direction strains of the selected sections are performed between numerical and experimental results, which validates the numerical model. Additionally, the stress distributions of different pipe layers are discussed based on the results of the numerical analysis. Finally, the comparison of axial tensile stiffness results validates the accuracy of the analytical model considering radial deformation. This study proposes effective theoretical and numerical models to predict the tensile behavior of a fiber-reinforced flexible pipe, which provides useful references for the design and structural analysis of these pipes. [ABSTRACT FROM AUTHOR]