Search

Multiple sclerosis (MS) is a chronic, autoimmune condition that primarily affects the myelin sheath covering the neurons of the central nervous system, including those of the brain and spinal cord. Although the etiology is not completely understood, various factors, such as genetic infections and environmental background, play a role in the pathogenesis. Repeated active episodes of MS characterized with marked inflammation results in the scarring of particular nerve segments, and eventually results in functional impairment over a period of time. Based on the clinical course of the disease, four clinical types of MS have been identified, with the relapsing-remitting type being the commonest. MS is known to occur more commonly in females in the age group of 20-40 years. Dysarthria, fatigue, muscle spasm, and numbness are the common presenting symptoms of MS. Diagnosis is generally achieved with MRI brain scans, showing demyelination plaques and lumbar puncture. Treatment of MS's acute phase includes high doses of corticosteroids; whereas preventive treatment of MS includes the prescription of immunosuppressive therapy, including biologics. A large group of MS patients present with oral manifestations, including dysphagia, dysarthria, temporomandibular joint (TMJ) disturbances, facial palsy, and chronic periodontal diseases. Other typical oral manifestations seen in MS patients include trigeminal neuralgia, paresthesia, or orofacial pain. Dental treatment and following drug prescription needs to be tailored to each patient, as there is a possibility of drug interactions. This paper presents a comprehensive, updated review of MS, with emphasis on oral manifestations and dental considerations. Additionally, it presents a case of a 40-year-old female diagnosed with MS that was presented to a dental hospital. The report discusses the oral manifestations and dental management.

Background and Objectives : Diagnostic evaluation with the aid of biomarkers has reached newer heights to assess disease activity. Salivary calcium, magnesium, and pH are one of the biochemical parameters which can be helpful in assessing the progression of periodontal disease. Smokers are at topnotch threat for having oral diseases, predominantly periodontal diseases. The aim of this study was to assess the salivary calcium, magnesium, and pH levels in smokers compared with non-smokers with chronic periodontitis. Materials and Methods : The current study was conducted on 210 individuals affected with generalized chronic periodontitis, with the age group between 25 and 55 years. Based on their smoking habit, an equal number of patients were categorized into two groups; namely, group I consisted of non-smokers and group II consisted of smokers. The clinical parameters that were measured included Plaque Index (PI), Gingival Index (GI), Probing Pocket Depth (PPD), and Clinical Attachment Loss (CAL). The biochemical variables that were evaluated in the current study included salivary calcium, magnesium, and pH using an AVL9180 electrolyte analyzer (Roche, Germany). The gathered data were analyzed with an unpaired t test was using SPSS 20.0. Results : A statistically significant higher PPD ( p < 0.01), CAL ( p < 0.05), and salivary calcium levels ( p < 0.001) were observed in the smokers' compared with their non-smoking counterparts. Among the biochemical parameters, calcium showed a significantly ( p < 0.001) higher level in smokers (5.79 ± 1.76) in contrast to non-smokers (3.87 ± 1.03). Additionally, a significant negative correlation ( p < 0.05) between calcium and PPD was observed in non-smokers, whereas a non-significant inverse relation ( p > 0.05) was seen in smokers. Conclusions : The present study indicates that the salivary calcium level can be a potential biochemical parameter to assess the progression of periodontal disease in smokers and non-smokers. Within the limitations of the current study, the salivary biomarkers appear to have an essential role in the identification and indication of the status of periodontal diseases.

The continuous exposure of electromagnetic field (EMF) radiation from cell phone towers may possibly have an influence on public health. Each cell phone tower is unique in terms of number of antennas and its associated attributes; thus, the radiation exposure varies from one tower to another. Hence, a standardized method for quantifying the exposure is beneficial while studying the effects of radiation on the human population residing around the cell phone towers. A mere collection of data or human samples without understanding the cell phone tower differences may show study results such as an increase or decrease in biological parameters. Those changes may not be due to the effects of EMF radiation from cell phone towers but could be due to any other cause. Therefore, a comparative study was designed with the aim of quantifying and comparing the electric field strength (EF), magnetic field strength (MF) and power density (PD) on four sides of cell phone towers with varying numbers of antennas at 50 m and 100 m. Further, an attempt was made to develop a PD-based classification for facilitating research involving human biological samples. Through convenience sampling, sixteen cell phone towers were selected. With the use of coordinates, the geographic mapping of selected towers was performed to measure the distance between the towers. Based on the number of antennas, the cell phone towers were categorized into four groups which are described as group I with 1-5 antennas, group II comprising of 6-10 antennas, group III consisting of 11-15 antennas and group IV comprised of towers clustered with more than 15 antennas. The study parameters, namely the EF, MF and PD, were recorded on all four sides of the cell phone towers at 50 m and 100 m. One-way ANOVA was performed to compare the study parameters among study groups and different sides using the Statistical Package for the Social Sciences (SPSS) version 25.0. The mean MF in Group IV was 2221.288 ± 884.885 μA/m and 1616.913 ± 745.039 μA/m at 50 m and 100 m respectively. The mean PD in Group IV at 50 m was 0.129 ± 0.094 μW/cm 2 and 0.072 ± 0.061 μW/cm 2 at 100 m. There was a statistically significant ( p < 0.05) increase in the MF and PD at 50 m compared to 100 m among cell phone tower clusters with more than 15 antennas (Group IV). On the other hand, a non-significant increase in EF was observed at 50 m compared to 100 m in Group II and IV. The EF, MF and PD on all four sides around cell phone towers are not consistent with distance at 50 m and 100 m due to variation in the number of antennas. Accordingly, a PD-based classification was developed as low, medium and high for conducting research involving any biological sample based on quantile. The low PD corresponds to 0.001-0.029, medium to 0.03-0.099 and high to 0.1-0.355 (μW/cm 2 ). The PD-based classification is a preferred method over the sole criteria of distance for conducting human research as it measures the true effects of EMF radiation from the cell phone towers.

This study analyzes the evidence of the marginal discrepancy and internal adaptation of copings fabricated using three types of resin patterns with subtractive (milling) and additive technology (3D printing), as it is not widely reported. Working casts ( n = 15) were scanned and patterns were completed using computer-aided designing (CAD). Resin patterns were fabricated using the designed data and divided into three groups according to the method of fabrication of patterns: subtractive technology-CAD milled polymethyl methacrylate resin (Group-PMMA), additive technology [digital light processing (DLP) technique]-acrylonitrile-butadiene-styrene (ABS) patterns (Group-ABS), and polylactic acid (PLA) patterns (Group-PLA). Resin patterns were casted with Cobalt-Chromium (Co-Cr) alloy (lost wax technique). Internal and marginal gaps of the metal copings were analyzed with the replica technique under optical microscope. The Kruskal-Wallis test was used to compare values among the groups, and post hoc multiple tests confirmed the specific differences within the groups. The median marginal gap was least for CAD milled resin patterns, followed by PLA printed resin patterns and ABS printed resin patterns. There were significant differences between Group-PMMA and Group-PLA and Group-ABS ( p = 0.0001). There was no significant difference between Group-PLA and Group-ABS ( p = 0.899). The median internal gap was least for metal copings fabricated from Group-PLA, followed by Group-ABS and Group-PMMA. The differences were not statistically significant ( p = 0.638) for the internal gap. Full metal Co-Cr copings fabricated from the milled PMMA group had a better marginal fit, followed by the PLA and ABS printed groups. Copings fabricated with the PLA printed group had the best internal fit, though the values were statistically insignificant between the groups.

The success of endodontic treatment relies on both apical and coronal sealing. To achieve a good three-dimensional seal, the removal of the smear layer becomes mandatory. This study aims to assess the difference in debris accumulation and smear layer formation while using automated root canal irrigation and conventional syringe needle irrigation. Single-rooted human mandibular premolar teeth (n = 30) which were indicated for orthodontic extractions were selected. An endodontic access cavity was prepared, and a glide path was created. Based on the irrigation protocol decided upon for the study, the teeth were randomly allocated into three study groups, namely Group 1, where the manual syringe needle irrigation method was adopted; Group 2, in which automated root canal irrigation was undertaken; and Group 3, in which teeth remained un-instrumented as it was considered the Control group. The teeth were decoronated at the cement-enamel junction (CEJ) and were subjected for scanning electron microscopy (SEM) examination. Debris and smear layers were viewed in 1000× magnification and scored. A statistically significant (p < 0.05) lower mean debris and smear layer score (p < 0.05) was observed in both study groups when compared with the control group. However, no significant difference (p > 0.05) in the debris and smear layer was observed between the manual syringe needle irrigation and automated irrigation, although automated irrigation devices can be a potential alternative. The present study concluded that the efficacy of smear layer removal remained the same with both automated irrigation and manual syringe irrigation.

Resin-bonded fixed dental prostheses (RBFDP) are minimally invasive alternatives to traditional full-coverage fixed partial dentures as they rely on resin cements for retention. This study compared and evaluated the tensile bond strength of three different resin-bonded bridge designs, namely, three-unit fixed-fixed, two-unit cantilever single abutment, and three-unit cantilever double-abutted resin-bonded bridge. Furthermore, the study attempted to compare the tensile bond strengths of the Maryland and Rochette types of resin-bonded bridges. Based on the inclusion and exclusion criteria, a total of seventy-five extracted maxillary incisors were collected and later were mounted on the acrylic blocks. Three distinct resin-bonded metal frameworks were designed: three-unit fixed-fixed (n = 30), two-unit cantilever single abutment (n = 30), and a three-unit cantilever double abutment (n = 30). The main groups were further divided into two subgroups based on the retainer design such as Rochette and Maryland. The different prosthesis designs were cemented to the prepared teeth. Later, abutment preparations were made on all specimens keeping the preparation as minimally invasive and esthetic oriented. Impression of the preparations were made using polyvinyl siloxane impression material, followed by pouring cast using die stone. A U-shaped handle of 1.5 mm diameter sprue wax with a 3 mm hole in between was attached to the occlusal surface of each pattern. The wax patterns were sprued and cast in a cobalt-chromium alloy. The castings were cleaned by sandblasting, followed by finishing and polishing. Lastly, based on the study group, specimens for Rochette bridge were perforated to provide mechanical retention between resin cement and metal, whereas the remaining 15 specimens were sandblasted on the palatal side to provide mechanical retention (Maryland bridge). In order to evaluate the tensile bond strength, the specimens were subjected to tensile forces on a universal testing machine with a uniform crosshead speed. The fixed-fixed partial prosthesis proved superior to both cantilever designs, whereas the single abutment cantilever design showed the lowest tensile bond strength. Maryland bridges uniformly showed higher bond strengths across all framework designs. Within the limitations of this study, the three-unit fixed-fixed design and Maryland bridges had greater bond strengths, implying that they may demonstrate lower clinical failure than cantilever designs and Rochette bridges.

The essential factor in determining the preservation of restoration is the marginal seal. Restoring cervical lesions with a resin composite has always been a challenge. Composite resins with various viscosities and different bonding systems are being researched to reduce the microleakage. Confocal laser scanning microscopy (CLSM) is the latest non-destructive technique for visualizing the microleakage. Objectives: To evaluate and compare the microleakage of Universal Flo composite resin (G-aenial) using etch and rinse adhesive system ER-2 steps (Adper Single Bond 2), self-etch adhesive system SE-1 step (G-Bond), and self-adhesive flowable composite resin (Constic) in Class V cavities using a confocal laser scanning microscope. Materials and Method : Class V cavities were prepared on 27 caries-free human extracted premolar teeth on the buccal and lingual surfaces with standardized dimensions of 2 mm height, width 4 mm, and a depth of 2 mm. After the cavity preparation, all teeth were randomly divided into three groups, namely Group-I: G-aenial Universal Flo with Single Bond 2 ( n = 9 teeth); Group-II: G- aenial Universal Flo with G-Bond ( n = 9 teeth), and Group-III: Constic ( n = 9 teeth). The prepared and restored specimens were then subjected to thermocycling for 500 cycles in a water bath at 5 °C and 55 °C with a dwelling time of 30 s. The specimens were placed in 0.6% aqueous rhodamine dye for 48 h. Sectioning was carried out bucco-lingually and specimens were evaluated for microleakage under a confocal laser scanning microscope. Results: There was a significant difference ( p = 0.009) in microleakage when comparing total etch and rinse, specifically between Adper Single Bond 2 ER-2 steps (fifth generation) and self-adhesive flowable composite resin, which is Constic. There was more microleakage in the self-etch bonding agent, particularly G-Bond, SE-1 step (seventh generation), when compared to ER-2 steps (fifth generation bonding agent); however, the results were not statistically significant ( p = 0.468). The self-adhesive flowable composite resin showed more microleakage than SE-1 step and ER-2 steps. Conclusions: None of the adhesive systems tested were free from microleakage. However, less microleakage was observed in the total etch and rinse, especially Adper Single Bond 2 (ER-2 steps), than the self-etch adhesive system SE-1 step and self-adhesive flowable composite resin. Clinical significance : Constant research and technological advancements are taking place in dentin adhesives to improve the marginal seal. This has led to the evolution of total acid-etching dentin bonding agents termed as etch and rinse (ER)-2 steps (fifth generation dentin bonding agents) and self-etching (SE) 2 steps, and SE-1 step dentin bonding agents termed as the sixth and seventh generation bonding agents, respectively.

This systematic review aimed to compare the efficacy of herbal agents with ethylene diamine tetraacetic acid (EDTA) in removing the smear layer during root canal instrumentation. The research question in the present study was to assess: "Is there a significant difference in reducing smear layer comparing EDTA and herbal agents?" Electronic databases (PubMed, Scopus, and Web of Science) were searched from their start dates to April 2022 using strict inclusion and exclusion criteria, and reviewed following PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) 2020 guidelines. Only in vitro studies comparing herbal agents with EDTA were included in the current systematic review. Two reviewers independently assessed the included articles. A total of 625 articles were obtained from an electronic database. Eighteen papers were included for review of the full text, out of which, ten papers were excluded because they did not meet the inclusion criteria. Finally, eight articles were included in the systematic review. The present systematic review considered only in vitro studies; hence, the result cannot be completely translated to strict clinical conditions. The results of the present systematic review have shown that quixabeira, morindacitrifolia, oregano extract, and neem show better smear layer removal compared to other herbal agents, whereas they showed reduced smear layer removal when compared with EDTA. Although, it was seen that most of the included studies did not report a high quality of evidence. Hence, the present systematic review concludes that herbal agents have reported to show inferior smear layer removal when compared to EDTA. Thus, as far as herbal based alternatives are concerned, there is no highest level of evidence to state its real benefit when used as a chelating root canal irrigant.

This meta-analysis aimed to compare Marfan syndrome (MFS) patients with non-MFS populations based on orofacial health status to combine publicly available scientific information while also improving the validity of primary study findings. A comprehensive search was performed in the following databases: PubMed, Google Scholar, Scopus, Medline, and Web of Science, for articles published between 1 January 2000 and 17 February 2022. PRISMA guidelines were followed to carry out this systematic review. We used the PECO system to classify people with MFS based on whether or not they had distinctive oral health characteristics compared to the non-MFS population. The following are some examples of how PECO is used: P denotes someone who has MFS; E stands for a medical or genetic assessment of MFS; C stands for people who do not have MFS; and O stands for the orofacial characteristics of MFS. Using the Newcastle-Ottawa Quality Assessment Scale, independent reviewers assessed the articles' methodological quality and extracted data. Four case-control studies were analyzed for meta-analysis. Due to the wide range of variability, we were only able to include data from at least three previous studies. There was a statistically significant difference in bleeding on probing and pocket depth between MFS and non-MFS subjects. MFS patients are more prone to periodontal tissue inflammation due to the activity of FBN1 and MMPs. Early orthodontic treatment is beneficial for the correction of a narrow upper jaw and a high palate, as well as a skeletal class II with retrognathism of the lower jaw and crowding of teeth.

The interest in the use of green-mediated synthesis of nanoparticles (NPs) is shown to have increased due to their biocompatibility and reduction of overall production costs. The current study aimed to evaluate a novel nanocomposite (NC) prepared by using a combination of zinc oxide, silver and chitosan with lemon extract as a cross-linking agent and assessed its antimicrobial effectiveness against Enterococcus faecalis (E. faecalis). The NPs and NC were prepared individually using a modification of previously established methods. Ananalys is of the physiochemical properties of the NC was conducted using ultraviolet-visible spectroscopy (UV-Vis) (Shimadzu Corporation, Kyoto, Japan). and transmission electron microscopy (TEM) imaging(HR-TEM; JEOL Ltd., Akishima-shi, Japan. The microbial reduction with this novel NC was evaluated by measuring the minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) using a tube assay analytic technique. A time-kill assay analysis was conducted to evaluate the kinetic potential against E. faecalis at different time intervals. The novel NC showed a homogenous nanoparticle size under TEM imaging and under UV-Vis established an absorption range of 350−420 nm making it similar to its individual counterparts. The MIC and MIB were measured at 62.5 ± 20 mg/L (p < 0.05) and 250 ± 72 mg/L (p < 0.05), respectively. A time-kill assay analysis for the NC showed 5 h was required to eradicate E. faecalis. Based on the achieved results, it was seen that the novel NC using a combination of silver, zinc oxide and chitosan showed improved antimicrobial action against E. faecalis compared with its individual components under laboratory conditions. A complete eradication of 108 log units of E. faecalis at 250 mg/L occurred after a total of 5 h. These preliminary results establish the use of lemon extract-mediated silver, zinc and chitosan-based NC had an antibacterial effectiveness against E. faecalis similar to the individual counterparts used for its production under laboratory conditions.

E-learning has completely transformed how people teach and learn, particularly in the last three pandemic years. This study evaluated the effectiveness of additional procedure-specific video demonstrations through E-learning in improving the knowledge and practical preclinical skills acquisition of undergraduate dental students in comparison with live demonstration only. A randomized controlled trial was conducted for the second-year dental students in the College of Dentistry, Jouf University, to evaluate the impact of E-learning-assisted videos on preclinical skill competency levels in operative dentistry. After a brief introduction to this study, the second-year male and female students voluntarily participated in the survey through an official college email. Fifty participants were enrolled in the study after obtaining informed consent. The participants were randomly divided into two groups, twenty-five each. The control group (Group A) was taught using traditional methods, and the intervention group (Group B) used E-learning-assisted educational videos and traditional techniques. An objective structured practical examination (OSPE) was used to assess both groups. The faculty members prepared a structured, standardized form to evaluate students. After OSPE, statistical analysis was done to compare the grades of OSPE between Group A and Group B. Logistic regression analysis was done to express the effect of components of the OSPE on gender, cumulative gross point average (CGPA), Group A and Group B. The results showed a significant difference in the experimental groups after the intervention (p < 0.000). The simulator position parameter demonstrated that the participants had a significant competence level after the intervention by procedure-specific videos (p < 0.000) and an exponential value of 6.494. The participants taught by E-learning-assisted procedure-specific videos and traditional teaching strategies demonstrated an enhanced learning and skill competency level than participants who used only traditional teaching strategies.

A vital feature of conservative dentistry is the adhesion of the restorative material to the tooth structure for restoration of the tooth substance lost due to dental decay, trauma, or dental imperfections. In a perfect world, a restorative material should generate a lasting adhesion by bonding the restoration with tooth tissues. The ingress of micro-organisms, oral fluids, molecules, and ions through microscopic spaces due to faulty adhesion between restoration and tooth structure is known as microleakage. This study is focuses on the evaluation of adhesive failures between the restorative materials. In the past, studies have focused more on the bonding potential of a restorative material with the tooth surface. Therefore, there is need to carry out a study that compares the microleakage between resin-based restorative materials in a sandwich manner with and without the intermediate bonding layer after immersion in 2% methylene blue dye at different time intervals. The restorative materials used were composite Ceram X Mono plus (DENTSPLY) and Z350 (3M ESPE), Vitremer resin modified glass ionomer cement (RMGIC) (3M ESPE), smart dentine replacement SDR (3M ESPE), Bond NT (DENTSPLY), and Universal Bond (3M ESPE). A light emitting diode (LED) was used to cure the specimens. Artificial saliva was used as a storage medium for the specimens. Thermocycling of specimens was carried out at 500 cycles/30 s and 1000 cycles/30 s. The world health organization (WHO) grading tool for microleakage was used to analyze fluid ingress in the specimens through disclosing by 2% methylene blue dye. The statistical analysis was carried out with one-way analysis of variance (ANOVA) and Tukey post hoc test, keeping the level of significance at p ≤ 0.05. In Grade 0 = 85 samples, Grade 1 = 10 samples, Grade 2 = 7 samples, Grade 3 = 16 samples, and in Grade 4 = 2 samples were identified. This study describes that no microleakage was observed in SDR and resin composite groups as compared to Vitremer and resin composite groups.

The present study aimed to evaluate if commonly used endodontic irrigants such as 3% sodium hypochlorite (NaOCl, Prime Dental, Thane, India), 2% chlorhexidine (CHX, Sigma-Aldrich Co., St. Louis, MO, USA), and 17% ethylenediaminetetraacetic acid (EDTA, Meta-Biomed Co. Ltd., Cheongju-si, South Korea) influenced the setting time and metal composition of different base endodontic sealers on exposure. AH Plus (Dentsply De Trey GmbH, Konstanz, Germany), Sealapex (SybronEndo, Orange, CA, USA), mineral trioxide aggregate (MTA) Fillapex (Angelus Soluções Odontológicas, Londrina, Brazil), and Tubli-Seal (Kerr Dental, Orange, CA, USA) were selected as the different base representatives of endodontic sealers. These sealers were exposed to 3% NaOCl, 2% CHX, and 17% EDTA, and the individual setting time of the sealers was analyzed. The samples were analyzed for heavy metal elements such as chromium (Cr), nickel (Ni), cobalt (Co), cadmium (Cd), arsenic (As), mercury (Hg), lead (Pb), and beryllium (Be) by using inductively coupled plasma mass spectrometry (ICP-MS) analysis. For statistical analysis, one-way ANOVA and post hoc Tukey's tests were used. All selected sealers showed variation in setting time post-exposure to different irrigants. MTA Fillapex had the shortest mean setting time (215.7 min, post-exposure at 187.3 min) ( p < 0.05). Mean setting time was also affected for AH Plus (479.6 min, post-exposure at 423.9 min) ( p < 0.05) and Tubli-Seal (514.7 min, post-exposure at 465.2 min) ( p < 0.05). Sealapex showed the maximum reduction of setting time (864.8 min, post-exposure at 673.4 min) ( p < 0.05). All tested sealers showed heavy metals (Cr, Ni, Co, Cd, As, Hg, and Pb) in their composition, and the quantities were influenced by interaction with different irrigants. The heavy metal Be was not seen in any of the samples. Sealapex showed the longest setting time in comparison to other test sealers. Heavy metals were most present in Sealapex, followed by AH Plus, Tubli-Seal, and MTA Fillapex. MTA Fillapex was seen to have the shortest setting time, and heavy metal composition was least affected on interaction with different commonly used endodontic irrigants. Further, this study provides significant insight into the influence of different endodontic irrigants on interaction with different base endodontic sealers, which has not been reported previously, and future studies should emphasize endodontic irrigant-sealer interactions and their possible effects in the long run.

Esthetics, improved colour stability and ease of contour have made photo-activated resin based restorative materials being widely used in routine dental clinical practice. Perhaps improper and inadequate polymerization of resin based composite material might lead to elution of monomer. Thus, the aim of the current study was to quantify the monomer elution from three resin composites. The intended analysis was made using high performance liquid chromatography (HPLC) at two different time periods. Three different materials that were investigated in the current study included Swiss Tech resin composite (Group A), Ceram X (Group B) and Beautifil Injectable composite (Group C). Ten cylindrical samples were fabricated in each study group. In 75% wt of ethanol, the samples were ingressed immediately and stored at room temperature. A 0.5 mL of the samples was assessed at pre-defined time intervals at 24 h and 7th day. Later, assessment of the samples was performed with HPLC and the data was analyzed using statistical test. Bisphenol A-glycidyl methacrylate (Bis-GMA), Triethylene glycol dimethacrylate (TEGDMA), 2-hydroxyethyl methacrylate (HEMA) and Urethane dimethacrylate (UDMA) were quantified in the samples. When analyzing the release monomer, it was found that at the end of 24 h Bis-GMA was eluted more in the injectable resin composite whereas, TEGDMA was eluted from Swiss Tech and Ceram X resin composites. At the end of the 7th day it was evident that Bis-GMA was eluted maximum in all the three resin composites. Thus, monomer release was found to be evident among all three resin composites and it is of utmost important to be assessed in routine clinical practice.

The oral cavity is an intricate environment subjected to various chemical, physical, and thermal injuries. The effectiveness of the local and systemically administered drugs is limited mainly due to their toxicities and poor oral bioavailability that leads to the limited effectiveness of the drugs in the target tissues. To address these issues, nanoparticle drug delivery systems based on metals, liposomes, polymeric particles, and core shells have been developed in recent years. Nano drug delivery systems have applications in the treatment of patients suffering from temporomandibular joint disorders such as preventing degeneration of cartilage in patients suffering from rheumatoid arthritis and osteoarthritis and alleviating the pain along with it. The antibacterial dental applications of nano-drug delivery systems such as silver and copper-based nanoparticles include these agents used to arrest dental caries, multiple steps in root canal treatment, and patients suffering from periodontitis. Nanoparticles have been used in adjunct with antifungals to treat oral fungal infections such as candida albicans in denture wearers. Acyclovir being the most commonly used antiviral has been used in combination with nanoparticles against an array of viral infections such as the herpes simplex virus. Nanoparticles based combination agents offer more favorable drug release in a controlled manner along with efficient delivery at the site of action. This review presents an updated overview of the recently developed nanoparticles delivery systems for the management of temporomandibular joint disorders along with the treatment of different oral infections.

The methodologies applicable for the evaluation of periodontal associated diseases are constantly evolving to provide quick, realistic, and scientifically proven results. Trends in the past followed a clinical evaluation of periodontal tissues and radiographic-based reports that formed the foundation for detection of diseases involving the structures supporting the teeth. As the confines and limitations of conventional strategies became obvious over the passage of time, hand in hand variety of techniques have evolved and experimentally justified. These improvisations are based on an improved understanding of the periodontal-pathogenic cascade. Periodontal pathogenesis and a paradigm shift from disease understanding to disease prevention and treatment entail few prerequisites that demand the objectivity of diagnostics procedure that includes sensitivity and specificity along with an explanation of the intensity of the disease, Gingival crevicular fluid an oral bio-fluid resides in the close proximity with gingival tissues have been widely used to understand and differentiate the periodontal health and diseased status. The biomarkers present in the GCF can be a reliable tool to detect the minute changes seen in the disease processes. The GCF consists of various host and bacterial-derived products as well as biomarkers which in turn can be evaluated for the diagnosis, prognosis as well as management of the periodontal disease. Thus, the review aims at describing GCF as a potential oral biofluid helpful in differentiating periodontal health and disease status.

The detection of pulp stone in a patient suffering from undiagnosed systemic diseases can be an early diagnostic indicator. Thus, the aim of the study was to assess the prevalence of pulp stones in the Saudi Arabian population with cardiovascular diseases and diabetes mellitus. In a retrospective study, we included cone-beam computed tomography (CBCT) scans of 73 patients with cardiovascular disease and 76 patients with diabetes mellitus as group I and II, respectively. Group III comprised of CBCT scan of 80 healthy controls. From a total of 229 scans, 4807 teeth were screened for pulp stones throughout the arches. A chi-square test was used for comparing the prevalence of pulp stones among the groups. Univariable and multivariable analysis was done to evaluate the independent risk indicators for pulp stones. The tooth-wise prevalence of pulp stones in group I, II, and III was found to be 16.65%, 9.01%, and 3.86%, respectively. Patient-wise ( p < 0.01) and tooth-wise ( p < 0.01) prevalence was recorded significantly highest in the cardiovascular group followed by the diabetic group. The control group had the least prevalence. Significantly ( p < 0.01) higher number of pulp stones were found in cardiovascular patients with age > 50 years compared to other groups. Similarly, a significantly increased number of pulp stones were seen in the 1st molar ( p < 0.05) and the maxillary jaw ( p < 0.05) of patients with cardiovascular diseases. Subjects with cardiovascular disease and diabetes were found to have 2.94 times ( p < 0.001; CI 1.54-3.10) and 1.81 times ( p < 0.01; CI 0.48-2.06) higher risk of having pulp stones in comparison to healthy subjects. The first molar has 2.20 times ( p < 0.001; CI 0.84-2.45) increased the risk of having pulp stones compared to other tooth types. Systemic disease such as cardiovascular disease and diabetes mellitus poses a higher risk for the development of pulp stones. Among the systemic disease group, patients in the cardiovascular group showed a higher risk for pulp stones and also reported the maximum number of pulp stones compared to the diabetic and healthy subjects., Competing Interests: The authors declare no conflict of interest.

The pandemic of Coronavirus disease (COVID-19) has emerged as a global catastrophe that is plaguing mankind. In the past eight months since the world discovered about COVID-19, we learned a lot about server acute respiratory syndrome coronavirus 2 (SARS CoV-2) and perhaps there is much more to discover and understand about the virus. With the current understanding of the disease, we assume it will remain in an active state of transmission and progression among the community for a long time. Thus, it is advisable to adopt the disease's prevention protocol in our daily and work routine. During this pandemic patient requiring dental treatment cannot be neglected and the role of dental imaging is crucial in delivering treatment. Hence, this article attempts to provide an evidence-based compilation about the mode of transmission and clinical features of COVID-19. It also throws light on the potential source of disease transmission in the dental radiology setting. In addition, it suggests preventive measures to curb the infection and infrastructural model of the clinical setting that will assist in achieving control over the disease transmission. This article intends to project a strategy about protocols, infrastructure, and daily activities in a dental radiology office that institutions can adopt with modifications according to their local scenario.

Coronavirus disease (COVID-19) has emerged as a pandemic. The updated knowledge and a positive attitude of health care professionals (HCPs) towards fighting any pandemic is the key to success. Thus, the present study aims to assess the knowledge and attitude of HCPs towards COVID-19 in the Kingdom of Saudi Arabia (KSA). A cross-sectional study was conducted across the KSA, covering its five geographical regions with a non-probability quota sample. Twenty-nine, close-ended questions evaluating the knowledge and attitude domain were included in the questionnaire. It was developed with the help of Qualtrics software and circulated among the HCPs through the electronic mode. We analyzed data from about 1040 HCPs using the statistical package of social sciences (SPSS) v.21. All variables were presented in number and percentages. Univariate and multivariate logistic regression was performed to explore the odds ratio (OR) and adjusted odds ratio (aOR) of independent variables for inadequate knowledge and attitude. Considering the "good" level of the respective domain, the HCPs have displayed better knowledge (48.2%) over attitude (33.8%). Female (aOR: 1.55; 95% CI: 1.15-2.09; p = 0.004), Diploma degree (aOR: 2.51; 95% CI: 1.64-3.83; p < 0.001), 7-10 years' experience (aOR: 1.47; 95% CI: 1.01-2.15; p = 0.045) were at higher risk of having inadequate knowledge compared to their contemporaries. Among the sources, the Ministry of Health (MOH) website was the most popular source of information (76%). The knowledge and attitude of HCPs regarding COVID-19 was similar across all the regions of KSA. However, the continuing education program is warranted to fill the potential gap in knowledge for HCPs in higher-risk groups., Competing Interests: The authors declare no conflict of interest.

Diabetes mellitus is known to compromise the various aspects of homeostasis, including the immune response and the composition of oral microflora. One of the oral manifestations of diabetes mellitus is tooth loss and the survival rate of dental implants chosen as a treatment modality for its rehabilitation is controversial. The current study aims to evaluate and compare the failure rate of dental implants between well-controlled diabetic and healthy patients. A retrospective study of case-control design was conceptualized with 121 well-controlled diabetic and 136 healthy individuals. Records of subjects who had undergone oral rehabilitation with dental implants between the periods of January 2013 to January 2016 were retrieved. Post-operative evaluation was carried out for all patients for about three years to assess the immediate and long-term success of the procedure. From a total of 742 dental implants, 377 were placed in well-controlled diabetic patients (case group) and 365 in healthy subjects (control group). A comparable (9.81%), but non-significant ( p = 0.422) failure rate was found in the case group in comparison to the control group (9.04%). A non-significant ( p = 0.392) raised number (4.98%) of failure cases were reported among females in comparison to males (4.44%). In respect to arch, the mandibular posterior region was reported as the highest failure cases (3.09%; p = 0.411), with 2.29% of cases reported in the mandibular anterior ( p = 0.430) and maxillary posterior ( p = 0.983) each. The maxillary anterior region was found to have the least number (1.75%; p = 0.999) of failure cases. More (4.98%; p = 0.361) cases were reported to fail during the functional loading stage in contrast to osseointegration (4.44%; p = 0.365). A well-controlled diabetic status does not impose any additional risk for individuals undergoing dental implant therapy.