Search

Located on the southeastern periphery of the Tibetan Plateau, the Xianshuihe fault (XSHF) is an active left-lateral strike-slip fault renowned for its frequent and intensive seismic activities. This highlights the necessity of employing advanced geodetic methodologies to precisely evaluate the fault kinematics and seismic hazard potential along this fault. Among these techniques, interferometric synthetic aperture radar (InSAR) stands out for its high spatial resolution and regular revisit intervals, enabling accurate mapping of interseismic deformation associated with fault motion. However, the precision of InSAR in measuring deformation encounters several challenges, particularly artifacts stemming from phase unwrapping errors and atmospheric phase delays. In this study, we utilize ascending and descending Sentinel-1 InSAR images spanning from January 2017 to January 2023 to drive the line-of-sight (LOS) mean crustal velocities associated with the XSHF with emphasis on phase unwrapping errors and atmospheric delay corrections. Then, the reliability of the derived LOS velocities is assessed using independent observations from the Global Navigation Satellite System (GNSS). The inferred fault slip rate along the XSHF shows significant along-strike variations, gradually decreasing from ~11.1 mm/yr at the Luhuo section to ~6.6 mm/yr at the Kangding section and then sharply increasing to ~13.0 mm/yr towards its eastern terminus at the Moxi section. The fault locking depth shows similar along-strike variations, decreasing from ~19.5 km in the northwestern part to ~4.8 km at the Kangding section, before increasing to 19.6 km at the Moxi segment. Notably, apparent surface fault creeping, characterized by a slip rate of ~2.7 mm/yr, is observed at the Kangding segment, likely resulting from postseismic slip following the 2014 Mw 6.3 Kangding earthquake. [ABSTRACT FROM AUTHOR]

The Pamir, situated in central Asia, is a result of the ongoing northward advance of the Indian continent, leading to compression of the Asian landmass. While geodetic and seismic data typically indicate that the most significant deformation in Pamir is along its northern boundary, an Mw 7.2 earthquake on 7 December 2015 and an Mw 6.8 earthquake on 23 February 2023 have occurred in the remote interior of Pamir. These two Mw ≥ 6.5 earthquakes, with good observations of satellite synthetic aperture radar data, provide a rare opportunity to gain insights into rupture mechanics and deformation patterns in this challenging-to-reach region. Here, we utilize spaceborne synthetic aperture radar data to determine the seismogenic faults and finite slip models for these two earthquakes. Our results reveal that the 2015 earthquake ruptured a ~88 km long, left-lateral strike-slip fault that dips to northwest. The rupture of the 2015 earthquake extended to the ground surface over a length of ~50 km with a maximum slip of ~3.5 m. In contrast, the 2023 earthquake did not rupture the ground surface, with a maximum slip of ~2.2 m estimated at a depth of ~9 km. Notably, the seismogenic fault of the 2015 earthquake does not align with the primary strand of the Sarez–Karakul fault system (SKFS), and the 2023 earthquake occurred on a previously unmapped fault. The well-determined seismogenic faults for the 2015 and 2023 earthquakes, along with the SKFS and other distributed faults in the region, suggest the existence of a wide shear zone extending from south to north within the central Pamir. [ABSTRACT FROM AUTHOR]

The M w 7.6 Chi-Chi earthquake struck central western Taiwan in 1999. The rupture was complex with several dislocations along the 100-km long Chelungpu thrust fault. Revisiting this earthquake is a challenge, as the precision and coverage of the data sets available are quite poor. Furthermore, the topographic and vegetation coverage complexity of the area prevents coherent radar images. In this paper, radar and optical images, and terrestrial geodetic measurements, were utilised to study the fault. The Particle Swarm Optimization and Okada Inversion (PSOKINV) geodetic inversion package was used with the generalized Akaike's Bayesian Information Criterion (gABIC) to precisely determine the slip distribution and relative weighting of datasets. Differences in results using the data sets jointly or separately (e.g., under-estimation due to InSAR, inconsistencies in SPOT offsets, smoother slip distribution with gABIC weighting) are observable. Most of the energy was released in the northern part of the fault, where the strike veers toward the east, and mainly at depths less than 4 km. The PSOKINV-gABIC approach is viable for the study of complicated cases such as the Chi-Chi earthquake and can significantly benefit the weight determination and physical realism of the fault geometry. [ABSTRACT FROM AUTHOR]

Rapid population growth combined with recent drought events and decades of political instability have left the residents of Kabul facing water scarcity, significantly relying on groundwater. Groundwater overexploitation might have induced various magnitudes of ground subsidence, however, to date, no comprehensive study of ground subsidence in Kabul has been conducted. In this study, we investigated the spatio-temporal evolution of ground deformation phenomena and its main governing processes in Kabul from 2014 to 2019 using C-Band Sentinel-1 derived Interferometric Synthetic Aperture Radar (InSAR) time-series from both ascending and descending orbits to extract the two-dimensional (2D) surface displacement field. Four subsidence bowls were distinguished with highly variable spatial extents and deformation magnitudes over four separate aquifer basins, with the maximum value of −5.3 cm/year observed in the Upper Kabul aquifer basin. A wavelet analysis suggests that there is a strong correlation between the groundwater level variations and subsidence. Investigation of hydrogeological data further reveals that the observed subsidence could be attributed to the presence of highly compressible clayey soils. This detailed space-borne regional survey provides new insights into the main governing mechanism of land subsidence in Kabul and may direct better mitigation plans of potential hazards. [ABSTRACT FROM AUTHOR]

The 2019 Mw 7.5 New Ireland earthquake occurred at an equatorial area where the dense vegetation prevents remote sensing techniques such as C- or X-band interferometric synthetic aperture radar (SAR) from acquiring coherent phase measurements. Therefore, in this paper, multiple remote sensing techniques including the L-band interferometric SAR, the range and azimuth offset tracking of SAR intensities, and the offset tracking of optical images were employed to map its co-seismic deformation field and to determine the slip distribution. The surface rupture was clearly and consistently captured by all offset observations, with the ground fault trace striking at an angel of 315° and extending over 10 km. An iterative weighting strategy based on the residual root mean square of inversions using individual datasets was developed to determine the relative weight of each dataset, allowing for the joint inversion of the fault geometry, the refinement of the dip angle, and the determination of the best fitting slip distribution. The resultant model indicates a nearly left-lateral strike-slip motion on the Weitin fault that ruptured to the surface with a maximum slip of 6.10 m, occurring at a depth of ~10 km, and a geodetic moment release of 1.03 × 1020 Nm, corresponding to a magnitude of Mw 7.31. The distribution of aftershocks shows about 70% of aftershocks were located in the area with increased Coulomb failure stress and few aftershocks in the subduction zone to the south of the Weitin fault were triggered by this event. [ABSTRACT FROM AUTHOR]