Search

The adoption of Industry 4.0 is attracting manufacturing companies, but the implementation barriers they expect to face, such as huge investment costs, and lack of skilled workers and infrastructure, make many of them hesitate to go through with implementation. The lack of a standardization approach also adds more difficulties in the implementation of advanced key technologies. Based on the design for the six sigma (DFSS) method, a new decision-making and implementation approach (DM&I) is proposed to address some implementation barriers and provide strategic guidance to implement the Industry 4.0 advanced key technologies. In this study, a systematic literature review was conducted to determine the impact of the implementation barriers for Industry 4.0 adoption. The DM&I approach has been applied in a bearing ring production line as a real case. The proposed method consists of two steps: decision-making, which consists of the define phase in determining the exact system weak point in order to reduce the improvement risk and system operation disturbance; the evaluate phase, which is the determining of the level of use of key technologies; the visualize phase, which is the stage of designing and modeling the proposed system and creating the virtual environment to simulate the system in real-time in order to support the improved decision-making process and avoid the fear of high costs; and then the optimize phase, where the optimal level of use of key technologies is determined. Then, the implementation phase consists of the develop phase, which encompasses the stage of physical system construction and hardware software development, followed by the validate phase and the integrate phase. These phases support infrastructure improvement. However, the proposed approach can be used by manufacturing companies to improve production efficacy and competitiveness. [ABSTRACT FROM AUTHOR]

Wear is one of the most common failures of hydrodynamic bearings. The main purpose of the present work was to investigate the effects of wear on lubrication performance and acquire efficient vibration signatures for fault diagnosis. In this paper, a finite element model (FEM) for a two-disk rotor supported on worn hydrodynamic bearings is presented in which the oil film force is evaluated by linear and nonlinear models. Numerical and experimental results indicate that the static and dynamic characteristics of the bearing are significantly changed by wear, leading to a drop in system critical speeds due to the deterioration of the constraint status provided by the bearings to the rotor. As the wear depth increases, the onset speed of oil whirl increases, while that of oil whip becomes lower, and large amplitudes of resonance and oil whip are more likely to be excited. More notably, all of the above vibration signatures in the y-direction are more sensitive to wear compared to those in the x-direction, which means that wear faults can be diagnosed by differences in vibration characteristics between the x- and y-directions. This research can provide a theoretical foundation and engineering guidance for the hydrodynamic bearing wear fault diagnosis. [ABSTRACT FROM AUTHOR]

The floating ring bearing (FRB) has been widely used in the field of high-speed rotating machinery such as turbochargers, aviation engines and so on, because of its simple structure, high efficiency and low power consumption. In order to obtain the best ratio between inter-oil clearance and shaft radius of the floating ring bearing necessitates the design reference of dimensional parameters for the design of floating ring bearings. This study, based on the transfer-matrix method, developed the dynamic model of the floating ring bearing-rotor system, and, using the Runge–Kutta analysis method for floating ring bearings, the influence of oil film relative clearance ratio of floating rings on rotor system stability was analyzed and studied. The optimum clearance ratio between inner oil film and the shaft of floating ring bearings is λ = 0.01. This research can provide some theoretical support for the design of parameters and fault diagnosis of rotor floating ring bearing systems. [ABSTRACT FROM AUTHOR]

The vibration of a planetary gearbox (PG) is complex and mutually modulated, which makes the weak features of incipient fault difficult to detect. To target this problem, a novel method, based on an adaptive order bispectrum slice (AOBS) and the fault characteristics energy ratio (FCER), is proposed. The order bispectrum (OB) method has shown its effectiveness in the feature extraction of bearings and fixed-shaft gearboxes. However, the effectiveness of the PG still needs to be explored. The FCER is developed to sum up the fault information, which is scattered by mutual modulation. In this method, the raw vibration signal is firstly converted to that in the angle domain. Secondly, the characteristic slice of AOBS is extracted. Different from the conventional OB method, the AOBS is extracted by searching for a characteristic carrier frequency adaptively in the sensitive range of signal coupling. Finally, the FCER is summed up and calculated from the fault features that were dispersed in the characteristic slice. Experimental data was processed, using both the AOBS-FCER method, and the method that combines order spectrum analysis with sideband energy ratio (OSA-SER), respectively. Results indicated that the new method is effective in incipient fault feature extraction, compared with the methods of OB and OSA-SER. [ABSTRACT FROM AUTHOR]

Metaheuristics are incapable of analyzing robot problems without being enhanced, modified, or hybridized. Enhanced metaheuristics reported in other works of literature are problem-specific and often not suitable for analyzing other robot configurations. The parameters of standard particle swarm optimization (SPSO) were shown to be incapable of resolving robot optimization problems. A novel algorithm for robot kinematic analysis with enhanced parameters is hereby presented. The algorithm is capable of analyzing all the known robot configurations. This was achieved by studying the convergence behavior of PSO under various robot configurations, with a view of determining new PSO parameters for robot analysis and a suitable adaptive technique for parameter identification. Most of the parameters tested stagnated in the vicinity of strong local minimizers. A few parameters escaped stagnation but were incapable of finding the global minimum solution, this is undesirable because accuracy is an important criterion for robot analysis and control. The algorithm was trained to identify stagnating solutions. The algorithm proposed herein was found to compete favorably with other algorithms reported in the literature. There is a great potential of further expanding the findings herein for dynamic parameter identification. [ABSTRACT FROM AUTHOR]

The dynamic coefficients identification of journal bearings is essential for instability analysis of rotation machinery. Aiming at the measured displacement of a single location, an improvement method associated with the Kalman filter is proposed to estimate the bearing dynamic coefficients. Firstly, a finite element model of the flexible rotor-bearing system was established and then modified by the modal test. Secondly, the model-based identification procedure was derived, in which the displacements of the shaft at bearings locations were estimated by the Kalman filter algorithm to identify the dynamic coefficients. Finally, considering the effect of the different process noise covariance, the corresponding numerical simulations were carried out to validate the preliminary accuracy. Furthermore, experimental tests were conducted to confirm the practicality, where the real stiffness and damping were comprehensively identified under the different operating conditions. The results show that the proposed method is not only highly accurate, but also stable under different measured locations. Compared with the conventional method, this study presents a more than high practicality approach to identify dynamic coefficients, including under the resonance condition. With high efficiency, it can be extended to predict the dynamic behaviour of rotor-bearing systems.

The planetary gearbox is at the heart of most rotating machinery. The premature failure and subsequent downtime of a planetary gearbox not only seriously affects the reliability and safety of the entire rotating machinery but also results in severe accidents and economic losses in industrial applications. It is an important and challenging task to accurately detect failures in a planetary gearbox at an early stage to ensure the safety and reliability of the mechanical transmission system. In this paper, a novel method based on wavelet packet energy (WPE) and modulation signal bispectrum (MSB) analysis is proposed for planetary gearbox early fault diagnostics. First, the vibration signal is decomposed into different time-frequency subspaces using wavelet packet decomposition (WPD). The WPE is calculated in each time-frequency subspace. Secondly, the relatively high energy vectors are selected from a WPE matrix to obtain a reconstructed signal. The reconstructed signal is then subjected to MSB analysis to obtain the fault characteristic frequency for fault diagnosis of the planetary gearbox. The validity of the proposed method is carried out through analyzing the vibration signals of the test planetary gearbox in two fault cases. One fault is a chipped sun gear tooth and the other is an inner-race fault in the planet gear bearing. The results show that the proposed method is feasible and effective for early fault diagnosis in planetary gearboxes.

Small cracks are common defects in steel and often lead to catastrophic accidents in industrial applications. Various nondestructive testing methods have been investigated for crack detection; however, most current methods focus on qualitative crack identification and image processing. In this study, eddy current pulsed thermography (ECPT) was applied for quantitative crack detection based on derivative analysis of temperature variation. The effects of the incentive parameters on the temperature variation were analyzed in the simulation study. The crack profile and position are identified in the thermal image based on the Canny edge detection algorithm. Then, one or more trajectories are determined through the crack profile in order to determine the crack boundary through its temperature distribution. The slope curve along the trajectory is obtained. Finally, quantitative analysis of the crack sizes was performed by analyzing the features of the slope curves. The experimental verification showed that the crack sizes could be quantitatively detected with errors of less than 1%. Therefore, the proposed ECPT method was demonstrated to be a feasible and effective nondestructive approach for quantitative crack detection., Competing Interests: The authors declare no conflict of interest.