Search

Porous pure SnO2 nanofibers (NFs) and La2O3 nanoparticles (NPs)-embedded porous SnO2 NFs were successfully synthesized via electrospinning followed by calcination. These materials were systematically evaluated as gas-sensing elements in metal-oxide-semiconductor (MOS) sensors. The La2O3 NPs embedded in porous SnO2 NFs demonstrated superior gas-sensing performance compared to pure SnO2 NFs. Specifically, the incorporation of La2O3 resulted in a 12-fold enhancement in gas-sensing response towards ethanol, significantly improving both sensitivity and selectivity by tuning the carrier concentration and modifying oxygen deficiencies and chemisorbed oxygen levels. Thus, La2O3 NPs embedded in SnO2 NFs present a promising strategy for the development of high-performance ethanol gas sensors. [ABSTRACT FROM AUTHOR]

Hydrogen sulfide (H2S) is a highly toxic and corrosive gas commonly found in industrial emissions and natural gas processing, posing serious risks to human health and environmental safety even at low concentrations. The early detection of H2S is therefore critical for preventing accidents and ensuring compliance with safety regulations. This study presents the development of porous ZnO/SnO2-nanocomposite gas sensors tailored for the ultrasensitive detection of H2S at sub-ppb levels. Utilizing a screen-printing method, we fabricated five different sensor compositions—ranging from pure SnO2 to pure ZnO—and characterized their structural and morphological properties through X-ray diffraction (XRD) and scanning electron microscopy (SEM). Among these, the SnO2/ZnO sensor with a composition-weight ratio of 3:4 demonstrated the highest response at 325 °C, achieving a low detection limit of 0.14 ppb. The sensor was evaluated for detecting H2S concentrations ranging from 5 ppb to 500 ppb under dry, humid air and N2 conditions. The relative concentration error was carefully calculated based on analytical sensitivity, confirming the sensor's precision in measuring gas concentrations. Our findings underscore the significant advantages of mixture nanocomposites in enhancing gas sensitivity, offering promising applications in environmental monitoring and industrial safety. This research paves the way for the advancement of highly effective gas sensors capable of operating under diverse conditions with high accuracy. [ABSTRACT FROM AUTHOR]

The influence of Eu doping (0.5, 1 and 2 mol.%) and annealing in an oxygen-deficient atmosphere on the structure and optical properties of SnO2 nanoparticles were investigated in relation to electronic structure. The X-ray diffraction (XRD) patterns revealed single-phase tetragonal rutile structure for both synthesized and annealed Eu-doped SnO2 samples, except for the annealed sample with 2 mol.% Eu. The results of X-ray photoelectron spectroscopy (XPS) emphasized that europium incorporated into the SnO2 host lattice with an oxidation state of 3+, which was accompanied by the formation of oxygen vacancies under cation substitution of tetravalent Sn. Moreover, XPS spectra showed the O/Sn ratio, which has been reduced under annealing for creating additional oxygen vacancies. The pulse cathodoluminescence (PCL) demonstrated the concentration dependence of Eu site symmetry. Combination of XRD, XPS and PCL revealed that Eu doping and following annealing induce strongly disordering of the SnO2 crystal lattice. Our findings provide new insight into the interaction of rare-earth metals (Eu) with host SnO2 matrix and new evidence for the importance of oxygen vacancies for optical and electronic structure formation. [ABSTRACT FROM AUTHOR]

We investigate the preparation of mesoscopic SnO2 nanoparticulate films using a Sn(IV) hydrate salt combined with a liquid pyrrolidone derivative to form a homogeneous precursor mixture for functional SnO2 nanomaterials. We demonstrate that N-methyl-2-pyrrolidone (NMP) plays a crucial role in forming uniform SnO2 films by both stabilizing the hydrolysis products of Sn(IV) sources and acting as a base liquid during nanoparticle growth. The hydrolysis of Sn(IV) was controlled by adjusting the reaction temperature to as low as 110 °C for 48 h. High-resolution TEM analysis revealed that highly crystalline SnO2 nanoparticles, approximately 3–5 nm in size, were formed. The SnO2 nanoparticles were deposited onto F-doped SnO2 glass and converted into dense particle films through heat treatments at 400 °C and 500 °C. This pyrrolidone-based nanoparticle synthesis enabled the production of not only crystallized SnO2 but also transparent and uniform films, most importantly by controlling the slow hydrolysis of Sn(IV) and polycondensation only with those two chemicals. These findings offer valuable insights for developing stable and uniform electron transport layers of SnO2 in mesoscopic solar cells, such as perovskite solar cells. [ABSTRACT FROM AUTHOR]

The organic pollutants discharged from industrial wastewater have caused serious harm to human health. The efficient photocatalytic degradation of organic pollutants under sunlight shows promise for industrial applications and energy utilization. In this study, a modified TiO2 photocatalyst doped with bismuth (Bi) and fluorine (F) and composited with SnO2 and SiO2 was prepared, and its performance for the degradation of Rhodamine B (RhB) under simulated sunlight was evaluated. Through the optimization of the doping levels of Bi and F, as well as the ratio of SnO2 and SiO2 to TiO2, the optimal catalyst reached degradation efficiency of 100% for RhB within 20 min under simulated sunlight, with a first-order reaction rate constant of 0.291 min−1. This value was 15, 41, 6.5, and 3.3 times higher than those of TiO2/SnO2, Bi/TiO2, Bi-TiO2/SnO2, and F/Bi-TiO2/SnO2, respectively. The active species detection showed that h+ was the most crucial active species in the process. The role of Bi and F addition and SnO2-SiO2 compositing was investigated by characterization. Bi formed a chemical bonding with TiO2 by doping into TiO2. The absorbance intensity in the UV and visible light regions was improved by SnO2 and F modification. Composite with SiO2 led to a larger surface area that allowed for more RhB adsorption sites. These beneficial modifications greatly enhanced the photocatalytic activity of the catalyst. [ABSTRACT FROM AUTHOR]

Metal oxide core–shell fibrous nanostructures are promising gas-sensitive materials for the detection of a wide variety of both reducing and oxidizing gases. In these structures, two dissimilar materials with different work functions are brought into contact to form a coaxial heterojunction. The influence of the shell material on the transportation of the electric charge carriers along these structures is still not very well understood. This is due to homo-, hetero- and metal/semiconductor junctions, which make it difficult to investigate the electric charge transfer using direct current methods. However, in order to improve the gas-sensing properties of these complex structures, it is necessary to first establish a good understanding of the electric charge transfer in ambient air. In this article, we present an impedance spectroscopy study of networked SnO2/Ga2O3 core–shell nanobelts in ambient air. Tin dioxide nanobelts were grown directly on interdigitated gold electrodes, using the thermal sublimation method, via the vapor–liquid–solid (VLS) mechanism. Two forms of a gallium oxide shell of varying thickness were prepared via halide vapor-phase epitaxy (HVPE), and the impedance spectra were measured at 189–768 °C. The bulk resistance of the core–shell nanobelts was found to be reduced due to the formation of an electron accumulation layer in the SnO2 core. At temperatures above 530 °C, the thermal reduction of SnO2 and the associated decrease in its work function caused electrons to flow from the accumulation layer into the Ga2O3 shell, which resulted in an increase in bulk resistance. The junction resistance of said core–shell nanostructures was comparable to that of SnO2 nanobelts, as both structures are likely connected through existing SnO2/SnO2 homojunctions comprising thin amorphous layers. [ABSTRACT FROM AUTHOR]

We performed an electrochromic investigation to optimize the composition of reactive magnetron-sputtered mixed layers of zinc oxide and tin oxide (ZnO-SnO2). Deposition experiments were conducted as a combinatorial material synthesis approach. The binary system for the samples of SnO2-ZnO represented the full composition range. The coloration efficiency (CE) was determined for the mixed oxide films with the simultaneous measurement of layer transmittance, in a conventional three-electrode configuration, and an electric current was applied by using organic propylene carbonate electrolyte cells. The optical parameters and composition were measured and mapped by using spectroscopic ellipsometry (SE). Scanning Electron Microscopy (SEM) and Energy-Dispersive X-ray Spectroscopy (EDS) measurements were carried out to check the SE results, for (TiO2-SnO2). Pure metal targets were placed separately from each other, and the indium–tin-oxide (ITO)-covered glass samples and Si-probes on a glass holder were moved under the two separated targets (Zn and Sn) in a reactive argon–oxygen (Ar-O2) gas mixture. This combinatorial process ensured that all the compositions (from 0 to 100%) were achieved in the same sputtering chamber after one sputtering preparation cycle. The CE data evaluated from the electro-optical measurements plotted against the composition displayed a characteristic maximum at around 29% ZnO. The accuracy of our combinatorial approach was 5%. [ABSTRACT FROM AUTHOR]

Polycrystalline SnO2-HfO2 nanolaminated thin films were grown by atomic layer deposition (ALD) on SiO2/Si(100) and TiN substrates at 300 °C. The samples, when evaluated electrically, exhibited bipolar resistive switching. The sample object with a stacked oxide layer structure of SnO2 | HfO2 | SnO2 | HfO2 additionally exhibited bidirectional threshold resistive switching properties. The sample with an oxide layer structure of HfO2 | SnO2 | HfO2 displayed bipolar resistive switching with a ratio of high and low resistance states of three orders of magnitude. Endurance tests revealed distinguishable differences between low and high resistance states after 2500 switching cycles. [ABSTRACT FROM AUTHOR]

Wide-bandgap tin oxide ( SnO 2 ) thin-films are frequently used as an electron-transporting layers in perovskite solar cells due to their superior thermal and environmental stabilities. However, its crystallization by conventional thermal methods typically requires high temperatures and long periods of time. These post-processing conditions severely limit the choice of substrates and reduce the large-scale manufacturing capabilities. This work describes the intense-pulsed-light-induced crystallization of SnO 2 thin-films using only 500 μ s of exposure time. The thin-films' properties are investigated using both impedance spectroscopy and photoconductivity characteristic measurements. A Nyquist plot analysis establishes that the process parameters have a significant impact on the electronic and ionic behaviors of the SnO 2 films. Most importantly, we demonstrate that light-induced crystallization yields improved topography and excellent electrical properties through enhanced charge transfer, improved interfacial morphology, and better ohmic contact compared to thermally annealed (TA) SnO 2 films. [ABSTRACT FROM AUTHOR]

Furfural, an important biobased compound, can be synthesized through the chemocatalytic conversion of D-xylose and hemicelluloses from lignocellulose. It has widespread applications in the production of valuable furans, additives, resins, rubbers, synthetic fibers, polymers, plastics, biofuels, and pharmaceuticals. By using barley hulls (BHs) as biobased support, a heterogeneous biochar Sn-NUS-BH catalyst was created to transform corncob into furfural in cyclopentyl methyl ether–H2O. Sn-NUS-BH had a fibrous structure with voids, a large comparative area, and a large pore volume, which resulted in more catalytic active sites. Through the characterization of the physical and chemical properties of Sn-NUS-BH, it was observed that the Sn-NUS-BH had tin dioxide (Lewis acid sites) and a sulfonic acid group (Brønsted acid sites). This chemocatalyst had good thermostability. At 170 °C for 20 min, Sn-NUS-BH (3.6 wt%) was applied to transform 75 g/L of corncob with ZnCl2 (50 mM) to generate furfural (80.5% yield) in cyclopentyl methyl ether–H2O (2:1, v/v). This sustainable catalytic process shows great promise in the transformation of lignocellulose to furfural using biochar-based chemical catalysts. [ABSTRACT FROM AUTHOR]

The development of a sensor capable of selectively detecting hydrogen levels in the environment holds immense importance for ensuring the safer utilization of hydrogen energy. In this study, a hydrogen sensor made of Ce-doped single-layer graphene (SLG)/SnO2 composite material was fabricated using a hydrothermal method. The study examined the impact of varying Ce doping concentrations on the hydrogen sensing capabilities of the SLG/SnO2 matrix. The results show that the SLG/SnO2 hydrogen sensor doped with 2 mol% Ce demonstrated optimal performance at a humidity of 20%. It operated most efficiently at 250 °C, with a response of 2.49, representing a 25.75% improvement over the undoped sample. The response/recovery times were 0.46/3.92 s, which are 54.9% shorter than those of the undoped sample. The enhancement in hydrogen sensitivity stems from the synergistic effect of Ce and SLG, which facilitates the coexistence of n–n and p–n heterojunctions, thereby increasing carrier mobility and refining grain structure. Analysis via X-ray photoelectron spectroscopy (XPS) reveals that Ce increases the material's oxygen vacancy concentration, enhancing its hydrogen sensitivity. Ce-doped SLG/SnO2, with its robust hydrogen sensitivity, represents one of the leading candidates for future hydrogen gas sensors. [ABSTRACT FROM AUTHOR]

Interfacial engineering is of great concern in photovoltaic devices. Metal halide perovskite solar cells (PSCs) have garnered much attention due to their impressive development in power conversion efficiencies (PCEs). Benefiting from high electron mobility and good energy-level alignment with perovskite, aqueous SnO2 as an electron transport layer has been widely used in n-i-p perovskite solar cells. However, the interfacial engineering of an aqueous SnO2 layer on PSCs is still an obscure and confusing process. Herein, we proposed the preparation of n-i-p perovskite solar cells with different concentrations of SnO2 as electron transport layers and achieved optimized PCE with an efficiency of 20.27%. I Interfacial engineering with regard to the SnO2 layer is investigated by observing the surface morphology, space charge-limited current (SCLC) with the use of an electron-only device, and time-resolved photoluminescence (TRPL) of perovskite films. [ABSTRACT FROM AUTHOR]

Tin dioxide (SnO2) is a low-cost and high-capacity anode material for lithium-ion batteries, but the fast capacity fading significantly limits its practical applications. Current research efforts have focused on preparing sophisticated composite structures or optimizing functional binders, both of which increase material manufacturing costs. Herein, we utilize pristine and commercially available SnO2 nanopowders and enhance their cycling performance by simply narrowing the potential range and optimizing electrolytes. Specifically, a narrower potential range (0–1 V) mitigates the capacity fading associated with the conversion reaction, whereas an ether-based electrolyte further suppresses the volume expansion related to the alloy reaction. Consequently, this SnO2 anode delivers a promising battery performance, with a high capacity of ~650 mAhg−1 and stable cycling for 100 cycles. Our work provides an alternative approach to developing high-capacity and long-cycling metal oxide anode materials. [ABSTRACT FROM AUTHOR]

Tin dioxide (SnO2) is an important transparent conductive oxide (TCO), highly desirable for its use in various technologies due to its earth abundance and non-toxicity. It is studied for applications such as photocatalysis, energy harvesting, energy storage, LEDs, and photovoltaics as an electron transport layer. Elemental doping has been an established method to tune its band gap, increase conductivity, passivate defects, etc. In this study, we apply density functional theory (DFT) calculations to examine the electronic and optical properties of SnO2 when doped with members of the oxygen family, namely S, Se, and Te. By calculating defect formation energies, we find that S doping is energetically favourable in the oxygen substitutional position, whereas Se and Te prefer the Sn substitutional site. We show that S and Se substitutional doping leads to near gap states and can be an effective way to reduce the band gap, which results in an increased absorbance in the optical part of the spectrum, leading to improved photocatalytic activity, whereas Te doping results in several mid-gap states. [ABSTRACT FROM AUTHOR]

Ethanol sensors have found extensive applications across various industries, including the chemical, environmental, transportation, and healthcare sectors. With increasing demands for enhanced performance and reduced energy consumption, there is a growing need for developing new ethanol sensors. Micro-electromechanical system (MEMS) devices offer promising prospects in gas sensor applications due to their compact size, low power requirements, and seamless integration capabilities. In this study, SnO2-TiO2 nanocomposites with varying molar ratios of SnO2 and TiO2 were synthesized via ball milling and then printed on MEMS chips for ethanol sensing using electrohydrodynamic (EHD) printing. The study indicates that the two metal oxides dispersed evenly, resulting in a well-formed gas-sensitive film. The SnO2-TiO2 composite exhibits the best performance at a molar ratio of 1:1, with a response value of 25.6 to 50 ppm ethanol at 288 °C. This value is 7.2 times and 1.8 times higher than that of single SnO2 and TiO2 gas sensors, respectively. The enhanced gas sensitivity can be attributed to the increased surface reactive oxygen species and optimized material resistance resulting from the chemical and electronic effects of the composite. [ABSTRACT FROM AUTHOR]

The n-type semiconductor SnO2 with a wide band gap (3.6 eV) is massively used in gas-sensitive materials, but pure SnO2 still suffers from a high operating temperature, low response, and tardy responding speed. To solve these problems, we prepared small-sized pure SnO2 using hydrothermal and freeze-drying methods (SnO2-FD) and compared it with SnO2 prepared using a normal drying method (SnO2-AD). The sensor of SnO2-FD had an ultra-high sensitivity to NO2 at 100 °C with excellent selectivity and humidity stability. The outstanding gas sensing properties are attributed to the modulation of energy band structure and the increased carrier concentration, making it more accessible for electron exchange with NO2. The excellent gas sensing properties of SnO2-FD indicate its tremendous potential as a NO2 sensor. [ABSTRACT FROM AUTHOR]

In this study, we successfully synthesized a Pd-doped SnO2 (Pd-SnO2) material with a flower-like hierarchical structure using the solvothermal method. The material's structural proper-ties were characterized employing techniques such as XRD, XPS, FESEM and HRTEM. A gas sensor fabricated from the 2.0 mol% Pd-SnO2 material demonstrated exceptional sensitivity (Ra/Rg = 106) to 100 ppm ethanolamine at an operating temperature of 150 °C, with rapid response/recovery times of 10 s and 12 s, respectively, along with excellent linearity, selectivity, and stability, and a detection limit down to 1 ppm. The superior gas-sensing performance is attributed to the distinctive flower-like hierarchical architecture of the Pd-SnO2 and the lattice distortions introduced by Pd doping, which substantially boost the material's sensing characteristics. Further analysis using density functional theory (DFT) has revealed that within the Pd-SnO2 system, Sn exhibits strong affinities for O and N, leading to high adsorption energies for ethanolamine, thus enhancing the system's selectivity and sensitivity to ethanolamine gas. This research introduces a novel approach for the efficient and rapid detection of ethanolamine gas. [ABSTRACT FROM AUTHOR]

The effects of Au addition on the acetone response of Cu2O-added porous SnO2 (pr-Cu2O-SnO2) powders, which were synthesized by ultrasonic spray pyrolysis employing polymethyl methacrylate microspheres as a template, were investigated in this study. The 3.0 wt% Au-added pr-Cu2O-SnO2 sensor showed the largest acetone response among all sensors. In addition, the magnitude of the acetone response was much larger than those of the ethanol and toluene responses. The catalytic activities of these gases over Au-added pr-Cu2O-SnO2 powders were also examined to clarify the key factors affecting their acetone-sensing properties. The Au addition increased the complete oxidation activity of all gases, and the complete oxidation activity of acetone was much higher than those of ethanol and toluene. These results indicate that the oxidation behavior during the gas-diffusion process in the sensitive Au-added pr-Cu2O-SnO2 layer of the sensors is quite important in enhancing the acetone-sensing properties. [ABSTRACT FROM AUTHOR]

This study investigates the influence of synthesis methods and electrode geometry on the physico-chemical properties of 5%Gd-doped SnO2. Two distinct synthesis routes, co-precipitation and hydrothermal growth, were employed, resulting in powders denoted as SnO2: Gd 5%-CP and SnO2: Gd 5%-HT. Morpho-structural and textural analyses reveal a uniform morphology consisting of quasi-spherical nanoparticles with dimensions of ~6 nm and mesoporosity for CP and a non-uniform morphology with larger nanoparticles of ~42 nm, with irregular shapes and macroporosity for the HT sample, respectively. The powders were deposited onto alumina substrates equipped with platinum interdigital electrodes with alternative gaps of 200 μm and 100 μm. The back-side heater allows for variation in the temperature of the layer. Sensing properties assessed under in-field-like atmospheres simulated by a computer-controlled Gas Mixing System reveal higher sensitivity to methane compared to carbon dioxide. Although the sensor signals did not differ quantitatively, they exhibited distinct saturation tendencies with an increasing methane concentration, attributed to the morpho-structure and porosity induced by the synthesis method. Differentiation was achieved by varying the interdigital gap of the electrodes, highlighting different sensor signals and conduction mechanisms, determined by the specific size of the crystallites. [ABSTRACT FROM AUTHOR]

This study presents a straightforward and cost-effective method to enhance the photoelectrochemical (PEC) water-splitting performance of α-Fe2O3 (F), SnO2 (S), and α-Fe2O3 decorated with SnO2 quantum dots (FS) photoanodes in a NaOH electrolyte. The FS electrode demonstrated a notable improvement in PEC efficiency within the electrolyte. In particular, the generated charges of the FS anode in the NaOH electrolyte reached approximately 12.01 mA cm−2 under illumination, indicating that the developed heterostructures effectively enhanced kinetics, leading to improved separation of induced carrier pairs. This active carrier-pair separation mechanism contributed considerably to the increased PEC activity in the 0.1 M NaOH electrolyte. The reduction in the bandgap of FS increased its absorption capability in visible light, which further enhanced the current density. Furthermore, the reduction in electrolyte resistance (9.71 Ω), internal resistance (20.19 Ω), charge transfer resistance (3.21 kΩ), Tafel slope (45.5 mV dec-1), limiting current density (−2.09 mA cm−2), and exchange current density (−3.68 mA cm−2) under illumination at the interface enhanced the charge density of FS. Further, a strong interaction among photoanode nanostructures significantly enhances PEC activity by improving efficient charge separation and transport, reducing recombination rates, and enabling quicker movement of charge carriers to the electrode/electrolyte interface. Thus, this study provides an effective approach to increasing the PEC activity of heterostructures. [ABSTRACT FROM AUTHOR]

A new approach for the thermal reduction of tin dioxide (SnO2) in the carbon/sodium sulfite (Na2SO3) system is demonstrated. The process of tin smelting was experimentally optimized by adjusting the smelting temperature and amounts of the chemical components used for the thermal reduction of SnO2. The numbers obtained are consistent with the thermodynamic characteristics of the system and molar fractions of reactants derived from the proposed mechanism of the SnO2 thermal reduction process. They reveal that the maximum yield of tin is obtained if masses of C, Na2SO3 and SnO2 are approximately in the ratio 1:2:3 and the temperature is set to 1050 °C. The key role in the suggested mechanism is the thermal decomposition of Na2SO3. It was deduced from the available experimental data that the produced sulfur dioxide undergoes carbothermic reduction to carbonyl sulfide—an intermediate product involved in the bulk reduction of SnO2. Replacing sodium sulfite with sodium sulfate, sodium sulfide and even elemental sulfur practically terminated the production of metallic tin. The kinetic analysis was focused on the determination of the reaction orders for the two crucial reactants involved in the smelting process. [ABSTRACT FROM AUTHOR]

This research enhances ethanol sensing with Fe-doped tetragonal SnO2 films on glass, improving gas sensor reliability and sensitivity. The primary objective was to improve the sensitivity and operational efficiency of SnO2 sensors through Fe doping. The SnO2 sensors were synthesized using a flexible and adaptable method that allows for precise doping control, with energy-dispersive X-ray spectroscopy (EDX) confirming homogeneous Fe distribution within the SnO2 matrix. A morphological analysis showed a surface structure ideal for gas sensing. The results demonstrated significant improvement in ethanol response (1 to 20 ppm) and lower temperatures compared to undoped SnO2 sensors. The Fe-doped sensors exhibited higher sensitivity, enabling the detection of low ethanol concentrations and showing rapid response and recovery times. These findings suggest that Fe doping enhances the interaction between ethanol molecules and the sensor surface, improving performance. A mathematical model based on diffusion in porous media was employed to further analyze and optimize sensor performance. The model considers the diffusion of ethanol molecules through the porous SnO2 matrix, considering factors such as surface morphology and doping concentration. Additionally, the choice of electrode material plays a crucial role in extending the sensor's lifespan, highlighting the importance of material selection in sensor design. [ABSTRACT FROM AUTHOR]

Extensive research on organic solar cells (OSCs) over the past decade has led to efficiency improvements exceeding 18%. Enhancing the efficacy of binary organic solar cells involves multiple factors, including the strategic selection of materials. The choice of donor and acceptor materials, which must exhibit complementary absorption spectra, is crucial. Additionally, optimizing the solar cell structure, such as adjusting the thickness of layers and incorporating hole-transporting layers, can further increase efficiency. In this study, we simulated three different novels within the use of the inorganic SnO2 on the OSCs within this specific arrangement of structures using a drift-diffusion model: direct and inverted binary; direct ternary configurations of OSCs, specifically ITO/PEDOT: PSS/PM6:L8-BO/SnO2/Ag, ITO/SnO2/PM6:L8-BO/PEDOT: PSS/Ag; and FTO/PEDOT: PSS/PM6:D18:L8-BO/SnO2/Ag. These structures achieved power conversion efficiencies (PCE) of 18.34%, 18.37%, and 19.52%, respectively. The direct ternary device achieved an important Voc of 0.89 V and an FF of 82.3%, which is high in comparison with other simulated results in the literature. Our research focused on the role of SnO2 as an inorganic electron transport layer in enhancing efficiency in all three configurations. We also evaluated the properties of these structures by simulating external quantum efficiency (EQE), which results in a broadened absorption spectrum from 380 nm to 900 nm for both binary and ternary devices. Furthermore, we measured the spectral distribution of absorbed photons, and photo-charge extraction by linearly increasing voltage (photo-CELIV) to assess charge extraction and generation rates as well as charge mobility. These measurements help establish a robust model for practical application. [ABSTRACT FROM AUTHOR]

Magnesium and its alloys are attractive temporary implants due to their biocompatibility and biodegradability. Moreover, Mg has good mechanical and osteoinductive properties. But magnesium and Mg alloys have one significant disadvantage: poor corrosion resistance in a physiological environment. Hence, a deposition of various layers on the surface of Mg alloys seems to be a good idea. The purpose of the article is to analyze the structure and morphology of two MgCa2Zn1 and MgCa2Zn1Gd3 alloys coated by SnO2 ALD (atomic layer deposition) films of various thickness. The studies were performed using scanning electron microscopy (SEM), X-ray fluorescence (XRF), and an X-ray diffractometer. The corrosion activity of the thin films and substrate alloys in a chloride-rich Ringer's solution at 37 °C was also observed. The corrosion tests that include electrochemical, immersion measurements, and electrochemical impedance spectroscopy (EIS) were evaluated. The results indicated that SnO2 had a heterogeneous crystal structure. The surfaces of the thin films were rough with visible pores. The corrosion resistance of SnO2 measured in all corrosion tests was higher for the thicker films. The observations of corrosion products after immersion tests indicated that they were lamellar-shaped and mainly contained Mg, O, Ca, and Cl in a lower concentration. [ABSTRACT FROM AUTHOR]

This review details both the conventional and emerging methods of extracting tin from cassiterite. The emerging methods reviewed include sulphuric acid leaching of SnO, cooling crystallization of SnO, sulphide leaching, alkaline leaching, and dry chlorination. From these methods, the conventional approach (direct reduction smelting) stands out as the sole method that is suitable for industrial application, with none of the emerging ones being promising enough to be a contender. The thermodynamics involved in the hydrometallurgical extraction of tin from the mineral are also discussed. Δ G o values calculated at 25 °C for the reduction–dissolution of SnO2 using reducing gases revealed feasibility only when carbon monoxide was used. An indication of the possible species produced during the hydrolysis of the oxide of the metal (SnO2 and SnO) as a function of pH (ranging from −2 to 14 and 0 to 14 for SnO2 and SnO, respectively) was noted and highlighted to link a Pourbaix diagram generated from literature data. This diagram suggests that the solubility of SnO2 in both strongly acidic and alkaline media is possible, but with a small dissolution window in each. The purification and recovery routes of the various processing techniques were then envisaged. [ABSTRACT FROM AUTHOR]

Acetone is a biomarker found in the expired air of patients suffering from diabetes. Therefore, early and accurate detection of its concentration in the breath of such patients is extremely important. We prepared Tin(IV) oxide (SnO2) nanospheres via hydrothermal treatment and then decorated them with bimetallic PtAu nanoparticles (NPs) employing the approach of in situ reduction. The topology, elemental composition, as well as crystal structure of the prepared materials were studied via field emission scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, and X-ray diffraction. The findings revealed that bimetallic PtAu-decorated SnO2 nanospheres (PtAu/SnO2) were effectively synthesized as well as PtAu NPs evenly deposited onto the surface of the SnO2 nanospheres. Pure SnO2 nanospheres and PtAu/SnO2 sensors were prepared, and their acetone gas sensitivity was explored. The findings demonstrated that in comparison to pristine SnO2 nanosphere sensors, the sensors based on PtAu/SnO2 displayed superior sensitivity to acetone of 0.166–100 ppm at 300 °C, providing a low theoretical limit of detection equal to 158 ppm. Moreover, the PtAu/SnO2 sensors showed excellent gas response (Ra/Rg = 492.3 to 100 ppm), along with fast response and recovery (14 s/13 s to 10 ppm), good linearity of correlation, excellent repeatability, long-term stability, and satisfactory selectivity at 300 °C. This improved gas sensitivity was because of the electron sensitization of the Pt NPs, the chemical sensitization of the Au NPs, as well as the synergistic effects of bimetallic PtAu. The PtAu/SnO2 sensors have considerable potential for the early diagnosis and screening of diabetes. [ABSTRACT FROM AUTHOR]

Perovskite solar cells (PSCs) have attracted considerable interest owing to their low processing costs and high efficiency. A crucial component of these devices is the electron transport layer (ETL), which plays a key role in extracting and transmitting light-induced electrons, modifying interfaces, and adjusting surface energy levels. This minimizes charge recombination in PSCs, a critical factor in their performance. Among the various ETL materials, titanium dioxide (TiO2) and tin dioxide (SnO2) stand out due to their excellent electron mobility, suitable band alignment, high transparency, and stability. TiO2 is widely used because of its appropriate conduction band position, easy fabrication, and favorable charge extraction properties. SnO2, on the other hand, offers higher electron mobility, better stability under UV illumination, and lower processing temperatures, making it a promising alternative. This paper summarizes the latest advancements in the research of electron transport materials, including material selection and a discussion of electron collection. Additionally, it examines doping techniques that enhance electron mobility and surface modification technologies that improve interface quality and reduce recombination. The impact of these parameters on the performance and passivation behavior of PSCs is also examined. Technological advancements in the ETL, especially those involving TiO2 and SnO2, are currently a prominent research direction for achieving high-efficiency PSCs. This review covers the current state and future directions in ETL research for PSCs, highlighting the crucial role of TiO2 and SnO2 in enhancing device performance. [ABSTRACT FROM AUTHOR]

In this study, we prepared the SnO2/ZnFe2O4 (SZ) composite magnetic photocatalyst via a two-step hydrothermal method. Structural and performance analyses revealed that SZ-5 with a ZnFe2O4 mass ratio of 5% (SZ-5) exhibited optimal photocatalytic activity, achieving a 72.6% degradation rate of Rhodamine B (RhB) solution within 120 min. SZ-5 consisted of irregular nano blocks of SnO2 combined with spherical nanoparticles of ZnFe2O4, with a saturated magnetization intensity of 1.27 emu/g. Moreover, the specific surface area of SnO2 loaded with ZnFe2O4 increased, resulting in a decreased forbidden bandwidth and expanded light absorption range. The construction of a Z-type heterojunction structure between SnO2 and ZnFe2O4 facilitated the migration of photogenerated charges, reduced the recombination rate of electron-hole pairs, and enhanced electrical conductivity. During the photocatalytic reaction, RhB was degraded by·OH, O2−, and h+, in which O2− played a major role. [ABSTRACT FROM AUTHOR]

Gd/Fe-SnO2 nanopowders as novel photocatalysts for the active removal of Rose Bengal dye and methyl parathion pesticide were synthesized with a low-cost coprecipitation route. The X-ray diffraction analysis of SnO2, Sn0.96Gd0.02Fe0.02O2 and Sn0.94Gd0.02Fe0.04O2 nanopowders proved the formation of a tetragonal phase of tin oxide with average crystallite sizes in the range of 13–18 nm. The Fourier transform infrared (FTIR) spectra of all samples displayed the characteristic absorption bands of SnO2. The nanopowder of the pure SnO2 sample, as seen in its transmission electron microscope (TEM) image, contains spherical-like particles of variable sizes. The TEM images of the Sn0.96Gd0.02Fe0.02O2 and Sn0.94Gd0.02Fe0.04O2 powders revealed the synthesis of fine spherical nanoparticles. Based on the TEM images, the average particle size of the pure, (Gd, 2 wt% Fe) and (Gd, 4 wt% Fe) codoped SnO2 nanopowders was estimated to be 14, 10 and 12 nm, respectively. After the addition of (Gd, 2 wt% Fe) and (Gd, 4 wt% Fe) to the SnO2 structure, the band gap energy of SnO2 was reduced from 3.4 eV to 2.88 and 2.82 eV, respectively. Significantly, the Sn0.96Gd0.02Fe0.02O2 nanocatalyst exhibited a high removal efficiency of 98 and 96% for Rose Bengal dye and methyl parathion pesticide after activation by sunlight for 35 and 48 min, respectively. Furthermore, this catalyst has shown perfect mineralization as well as high stability properties for the treatment of Rose Bengal dye and methyl parathion pesticide. These results suggest the suitability of the Sn0.96Gd0.02Fe0.02O2 nanocatalyst for the treatment of agriculture and industrial effluent under sunlight light energy. [ABSTRACT FROM AUTHOR]

In this study, femtosecond (FS) laser irradiation with different laser energy densities of 138, 276, and 414 mJ/cm2 is applied to SnO2-nanowire (NW) gas sensors, and the effect of the FS laser irradiation on the gas sensor response toward toluene (C7H8) gas is investigated. The FS laser irradiation causes oxygen deficiency in the SnO2 NWs and forms SnO and SnOx. Moreover, an embossing surface with multiple nano-sized bumps is created on the SnO2 NW surface because of the FS laser irradiation. The FS laser-irradiated SnO2-NW gas sensor exhibits superior sensing performance compared with the pristine SnO2-NW gas sensor. Moreover, the FS laser energy density significantly affects gas-sensing performance, and the highest sensor response is achieved by the gas sensor irradiated at 138 mJ/cm2. The long-term stability test of the laser-irradiated SnO2-NW gas sensor is performed by comparing fresh and 6-month-old gas sensors in different gas concentrations and relative humidity levels. Comparable gas-sensing behaviors are examined between the fresh and 6-month-old gas sensor, and this verifies the robustness of the laser-irradiated SnO2-NW gas sensor. [ABSTRACT FROM AUTHOR]

In this work, we have studied the microstructure and unusual ferromagnetic behavior in epitaxial tin dioxide (SnO2) films implanted with 40 keV Co+ ions to a high fluence of 1.0 × 1017 ions/cm2 at room or elevated substrate temperatures. The aim was to comprehensively understand the interplay between cobalt implant distribution, crystal defects (such as oxygen vacancies), and magnetic properties of Co-implanted SnO2 films, which have potential applications in spintronics. We have utilized scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), vibrating sample magnetometry (VSM), differential thermomagnetic analysis (DTMA), and ferromagnetic resonance (FMR) to investigate Co-implanted epitaxial SnO2 films. The comprehensive experimental investigation shows that the Co ion implantation with high cobalt concentration induces significant changes in the microstructure of SnO2 films, leading to the appearance of ferromagnetism with the Curie temperature significantly above the room temperature. We also established a strong influence of implantation temperature and subsequent high-temperature annealing in air or under vacuum on the magnetic properties of Co-implanted SnO2 films. In addition, we report a strong chemical effect of ethanol on the FMR spectra. The obtained results are discussed within the model of two magnetic layers, with different concentrations and valence states of the implanted cobalt, and with a high content of oxygen vacancies. [ABSTRACT FROM AUTHOR]

The development of low-cost and low-power gas sensors for reliable NO2 gas detection is important due to the highly toxic nature of NO2 gas. Herein, initially, SnO2 nanowires (NWs) were synthesized through a simple vapor–liquid–solid growth mechanism. Subsequently, different amounts of SnO2 NWs were composited with MoS2 nanosheets (NSs) to fabricate SnO2 NWs/MoS2 NS nanocomposite gas sensors for NO2 gas sensing. The operation of the sensors in self-heating mode at 1–3.5 V showed that the sensor with 20 wt.% SnO2 (SM-20 nanocomposite) had the highest response of 13 to 1000 ppb NO2 under 3.2 V applied voltage. Furthermore, the SM-20 nanocomposite gas sensor exhibited high selectivity and excellent long-term stability. The enhanced NO2 gas response was ascribed to the formation of n-n heterojunctions between SnO2 NWs and MoS2, high surface area, and the presence of some voids in the SM-20 composite gas sensor due to having different morphologies of SnO2 NWs and MoS2 NSs. It is believed that the present strategy combining MoS2 and SnO2 with different morphologies and different sensing properties is a good approach to realize high-performance NO2 gas sensors with merits such as simple synthesis and fabrication procedures, low cost, and low power consumption, which are currently in demand in the gas sensor market. [ABSTRACT FROM AUTHOR]

The creation of effective supercapacitor materials is still a priority in the quest to improve energy storage technology. Herein, we present a novel nanocomposite composed of carbon nanoparticles (CNPs) and colloidal SnO2 quantum dots (c-SQDs) or colloidal SnO2 ultrasmall nanoparticles, synthesized through a facile sonochemical-assisted hydrothermal approach. The XRD and XPS analyses confirmed the successful synthesis and composition of the CNP/c-SQD nanocomposite. Morphology studies revealed a well-dispersed morphology with intimate interfacial interactions between the CNPs and c-SQDs. Specifically, the nanocomposite exhibited a high specific capacitance of 569 F/g at a current density of 1 A/g, surpassing conventional carbon-based supercapacitors. Furthermore, the nanocomposite displayed excellent stability with 99% capacity retention after 5000 cycles, indicative of its superior cyclability. These results underscore the potential of the CNP/c-SQD nanocomposite as a promising electrode material for high-performance supercapacitor applications, offering enhanced charge storage capacity, stability, and cyclability. This study contributes to the advancement of energy storage technologies, paving the way for the development of efficient and sustainable electrochemical energy storage devices. [ABSTRACT FROM AUTHOR]

This research successfully synthesized SnO2@ZnIn2S4 composites for photocatalytic tap water splitting using a rapid two-step microwave-assisted synthesis method. This study investigated the impact of incorporating a fixed quantity of SnO2 nanoparticles and combining them with various materials to form composites, aiming to enhance photocatalytic hydrogen production. Additionally, different weights of SnO2 nanoparticles were added to the ZnIn2S4 reaction precursor to prepare SnO2@ZnIn2S4 composites for photocatalytic hydrogen production. Notably, the photocatalytic efficiency of SnO2@ZnIn2S4 composites is substantially higher than that of pure SnO2 nanoparticles and ZnIn2S4 nanosheets: 17.9-fold and 6.3-fold, respectively. The enhancement is credited to the successful use of visible light and the facilitation of electron transfer across the heterojunction, leading to the efficient dissociation of electron–hole pairs. Additionally, evaluations of recyclability demonstrated the remarkable longevity of SnO2@ZnIn2S4 composites, maintaining high levels of photocatalytic hydrogen production over eight cycles without significant efficiency loss, indicating their impressive durability. This investigation presents a promising strategy for crafting and producing environmentally sustainable SnO2@ZnIn2S4 composites with prospective implementations in photocatalytic hydrogen generation. [ABSTRACT FROM AUTHOR]

Tin oxide (SnO2) has been recognized as one of the beneficial components in the electron transport layer (ETL) of lead–halide perovskite solar cells (PSCs) due to its high electron mobility. The SnO2-based thin film serves for electron extraction and transport in the device, induced by light absorption at the perovskite layer. The focus of this paper is on the heat treatment of a nanoaggregate layer of single-nanometer-scale SnO2 particles in combination with another metal-dopant precursor to develop a new process for ETL in PSCs. The combined precursor solution of Li chloride and titanium(IV) isopropoxide (TTIP) was deposited onto the SnO2 layer. We varied the heat treatment conditions of the spin-coated films comprising double layers, i.e., an Li/TTIP precursor layer and SnO2 nanoparticle layer, to understand the effects of nanoparticle interconnection via sintering and the mixing ratio of the Li-dopant on the photovoltaic performance. X-ray diffraction (XRD) and high-resolution transmission electron microscopy (HR-TEM) measurements of the sintered nanoparticles suggested that an Li-doped solid solution of SnO2 with a small amount of TiO2 nanoparticles formed via heating. Interestingly, the bandgap of the Li-doped ETL samples was estimated to be 3.45 eV, indicating a narrower bandgap as compared to that of pure SnO2. This observation also supported the formation of an SnO2/TiO2 solid solution in the ETL. The utilization of such a nanoparticulate SnO2 film in combination with an Li/TTIP precursor could offer a new approach as an alternative to conventional SnO2 electron transport layers for optimizing the performance of lead–halide perovskite solar cells. [ABSTRACT FROM AUTHOR]

We investigated the electronic structure of Mg-, Si-, and Zn-doped four-faceted [001]- and [110]-oriented SnO2 nanowires using first-principles calculations based on the linear combination of atomic orbitals (LCAO) method. This approach, employing atomic-centered Gaussian-type functions as a basis set, was combined with hybrid density functional theory (DFT). Our results show qualitative agreement in predicting the formation of stable point defects due to atom substitutions on the surface of the SnO2 nanowire. Doping induces substantial atomic relaxation in the nanowires, changes in the covalency of the dopant–oxygen bond, and additional charge redistribution between the dopant and nanowire. Furthermore, our calculations reveal a narrowing of the band gap resulting from the emergence of midgap states induced by the incorporated defects. This study provides insights into the altered electronic properties caused by Mg, Si, and Zn doping, contributing to the further design of SnO2 nanowires for advanced electronic, optoelectronic, photovoltaic, and photocatalytic applications. [ABSTRACT FROM AUTHOR]

Proton-exchange-membrane hydrogen fuel cells (PEMFCs) are an important energy device for achieving a sustainable hydrogen society. Carbon-based catalysts used in PEMFCs' cathode can degrade significantly during operation-voltage shifts due to the carbon deterioration. The longer lifetime of the system is necessary for the further wide commercialization of PEMFCs. Therefore, carbon-free catalysts are required for PEMFCs. In this study, highly crystallized conducting Sb-doped SnO2 (Sb-SnO2) nanoparticles (smaller than 7 nm in size) were synthesized using an ozone-assisted hydrothermal synthesis. Pt nanoparticles were loaded on Sb-SnO2 supporting particles by polyol method to be "Pt/Sb-SnO2 catalyst". The Pt/Sb-SnO2 catalyst showed a high oxygen reduction reaction (ORR) mass activity (178.3 A g−1-Pt @ 0.9 V), compared to Pt/C (149.3 A g−1-Pt @ 0.9 V). In addition, the retention ratio from the initial value of electrochemical surface area (ECSA) during 100,000-voltage cycles tests between 1.0 V and 1.5 V, Pt/SnO2 and Pt/Sb-SnO2 catalyst exhibited higher stability (90% and 80%), respectively, than that of Pt/C catalyst (47%). Therefore, the SnO2 and Sb-SnO2 nanoparticles synthesized using this new ozone-assisted hydrothermal method are promising as carbon-free catalyst supports for PEMFCs. [ABSTRACT FROM AUTHOR]

Novel flake-like Ni1−xSnxO2 particles were successfully prepared by template-free hydrothermal synthesis. The prepared samples were investigated for their properties by different characterization techniques. Scanning micrographs showed that the obtained particles consisted of nanoflakes. The X-ray diffraction results of the Ni1−xSnxO2 revealed the formation of mixed-phase Ni/SnO2 having the typical tetragonal structure of SnO2, and the cubic structure of Ni in a nanocrystalline nature. The doping with Ni had a certain influence on the host's lattice structure of SnO2 at different doping concentrations. Confirmation of the functional groups and the elements in the nanomaterials was accomplished using FTIR and EDS analyses. The electrochemical performance analysis of the prepared nanomaterials were carried out with the help of the CV, GCD, and EIS techniques. The specific capacitance of the synthesized nanomaterials with different concentrations of Ni dopant in SnO2 was analyzed at different scanning rates. Interestingly, a 5% Ni-doped SnO2 nanocomposite exhibited a maximum specific capacitance of 841.85 F g−1 at 5 mV s−1 in a 6 M KOH electrolyte. Further, to boost the electrochemical performance, a redox additive electrolyte was utilized, which exhibited a maximum specific capacitance of 2130.33 at 5 mV s−1 and an excellent capacitance retention of 93.22% after 10,000 GCD cycles. These excellent electrochemical characteristics suggest that the Ni/SnO2 nanocomposite could be utilized as an electrode material for high-performance supercapacitors. [ABSTRACT FROM AUTHOR]

Nowadays, metal oxide semiconductor gas sensors have diverse applications ranging from human health to smart agriculture with the development of Internet of Things (IoT) technologies. However, high operating temperatures and an unsatisfactory detection capability (high sensitivity, fast response/recovery speed, etc.) hinder their integration into the IoT. Herein, a ternary heterostructure was prepared by decorating WO3 nanoplates with Au and SnO2 nanoparticles through a facial photochemical deposition method. This was employed as a sensing material for 3-hydroxy-2-butanone (3H-2B), a biomarker of Listeria monocytogenes. These Au/SnO2–WO3 nanoplate-based sensors exhibited an excellent response (Ra/Rg = 662) to 25 ppm 3H-2B, which was 24 times higher than that of pure WO3 nanoplates at 140 °C. Moreover, the 3H-2B sensor showed an ultrafast response and recovery speed to 25 ppm 3H-2B as well as high selectivity. These excellent sensing performances could be attributed to the rich Au/SnO2–WO3 active interfaces and the excellent transport of carriers in nanoplates. Furthermore, a wireless portable gas sensor equipped with the Au/SnO2–WO3 nanoplates was assembled, which was tested using 3H-2B with known concentrations to study the possibilities of real-time gas monitoring in food quality and safety. [ABSTRACT FROM AUTHOR]

We present a theoretical investigation on the wide-band-gap semiconductor WO   3 in its room-temperature monoclinic structure. We carried out density functional theory and GGA-1/2 calculations on the bulk phase and the most stable (001) surface of the material, either in their stoichiometric form or in the presence of oxygen vacancies at various concentrations. Concerning the bulk phase, our results show how the inclusion of these defects correctly reproduces the intrinsic n-type doping of the material. The system is also found to be magnetic at reasonably high defect concentrations. As for the surface, the presence of vacancies gives rise to a magnetic behavior, whose features depend on the relative arrangement of native point defects. Oxygen vacancies are also responsible for additional tungsten oxidation states in both bulk and surface. Based on these results, we provide a rationale for the interpretation of most experimental data of this material and, possibly, other widespread transition metal oxides with similar properties and applications such as ReO   3 , TiO   2 , and SnO   2 . [ABSTRACT FROM AUTHOR]

SnO2-based gas sensors have been widely synthesized and used for the detection of various hazardous gases. However, the use of doped SnO2 in sensing applications has recently attracted increased interest due to the formation of a synergistic effect between the dopant and the host. Moreover, in the case of a surface acoustic wave (SAW) sensor, the piezoelectric material used in the fabrication of the sensor plays a crucial role in defining the response of the SAW sensor. As a ferroelectric material, barium strontium titanate (Ba0.6Sr0.4TiO3) has recently been studied due to its intriguing dielectric and electromechanical properties. Its high acoustic velocity and coupling coefficient make it a promising candidate for the development of acoustic devices; however, its use as a piezoelectric material in SAW sensors is still in its infancy. In this paper, we present the design, fabrication and validation of an indium doped SnO2-based SAW gas sensor on Ba0.6Sr0.4TiO3 thin film for room temperature (RT) applications. Pulsed laser deposition was used to deposit thin films of Ba0.6Sr0.4TiO3 and indium-doped SnO2. Different characterization techniques were employed to analyze the morphology and crystallization of the films. The performance of the fabricated sensor was validated by exposing it to different concentrations of ethanol and then analyzing the recorded frequency shift. The sensor exhibited fast response (39 s) and recovery (50 s) times with a sensitivity of 9.9 MHz/Δ. Moreover, the sensor had good linear response and reproducibility. The fabricated indium-doped SnO2-based SAW gas sensor could be suitable for practical room temperature applications. [ABSTRACT FROM AUTHOR]

This study employs a simple and cost-effective technique to enhance the photoelectrochemical (PEC) water-splitting performance of melamine cyanaurate microrods (M), SnO2 nanostructures (S), and melamine cyanaurate microrods decorated with SnO2 quantum dots (MS) by optimizing NaOH and Na2SO3 electrolytes. Notably, the MS electrode demonstrates a remarkable improvement in PEC efficiency in Na2SO3 solution associated with NaOH solution. Specifically, the induced currents of the MS anode in the Na2SO3 electrolyte are approximately 6.28 mAcm−2 more than those observed in the NaOH electrolyte solution. It is revealed that SO 3 2 − anions effectively consume the holes, leading to improved separation of the generated charge pairs. This effective charge separation mechanism significantly contributes to the enhanced PEC performance observed in Na2SO3 electrolytes. The findings of this study suggest a capable approach for improving the PEC activity of the materials through the careful optimization of the supported electrolytes. [ABSTRACT FROM AUTHOR]

Organic dyes in natural waters jeopardize human health. Whether semiconductor materials can effectively degrade dyes has become a challenge for scientific research. Based on this, this study rationally prepared different nanocomposites to remove organic dyes effectively. Pure SnO2 quantum dots, ZnO nanosheets, and SnO2/ZnO (ZS) binary nanocomposites are prepared using the hydrothermal method. Subsequently, SnO2/ZnO@GO (ZSG) ternary composites containing different amounts of GO, i.e., ZSG-5, ZSG-15, and ZSG-25, are synthesized by an ultrasonic water bath method, in which ZS was coupled with GO to form Z-type heterojunctions. The ZSG-15 ternary composites exhibited excellent photocatalytic activity for the degradation of rhodamine B by simulating sunlight. The test results show that the degradation rate of ZSG-15 is about 7.6 times higher than ZnO. The increase in photocatalytic activity is attributed to the synergistic effect of SnO2 and GO to improve the separation efficiency of photogenerated carriers in ZnO. Notably, the large specific surface area of GO increases the reactive sites. Compared with binary nanocomposites, ZSG-15 broadens the response range to light while further accelerating the electron transport rate and improving the photoelectric stability. [ABSTRACT FROM AUTHOR]

Resistive gas sensors, which are widely used for the detection of various toxic gases and vapors, can be fabricated in planar and tubular configurations by the deposition of a semiconducting sensing layer over an insulating substrate. However, their deposition parameters are not often optimized to obtain the highest sensing results. Here, we have investigated the effect of deposition variables on the H2 gas sensing performance of commercially available SnO2 particles on tubular alumina substrate. Utilizing a tubular alumina substrate equipped with gold electrodes, we varied the number of deposited layers, rotational speed of the substrate, and number of rotations of the substrate on the output of the deposited sensor in terms of response to H2 gas. Additionally, the effect of annealing temperatures (400, 500, 600, and 700 °C for 1 h) was investigated. According to our findings, the optimal conditions for sensor fabrication to achieve the best performance were the application of one layer of the sensing material on the sensor with ten rotations and a rotation speed of 7 rpm. In addition, annealing at a lower temperature (400 °C) resulted in better sensor performance. The optimized sensor displayed a high response of ~12 to 500 ppm at 300 °C. This study demonstrates the importance of optimization of deposition parameters on tubular substrates to achieve the best gas sensing performance, which should be considered when preparing gas sensors. [ABSTRACT FROM AUTHOR]

Previous studies have shown that undoped and doped SnO2 thin films have better optical and electrical properties. This study aims to investigate the thermoelectric properties of two distinct semiconducting oxide thin films, namely SnO2 and F-doped SnO2 (FTO), by the nebulizer spray pyrolysis technique. An X-ray diffraction study reveals that the synthesized films exhibit a tetragonal structure with the (200) preferred orientation. The film structural quality increases from SnO2 to FTO due to the substitution of F− ions into the host lattice. The film thickness increases from 530 nm for SnO2 to 650 nm for FTO films. Room-temperature electrical resistivity decreases from (8.96 ± 0.02) × 10−2 Ω·cm to (4.64 ± 0.01) × 10−3 Ω·cm for the SnO2 and FTO thin films, respectively. This is due to the increase in the carrier density of the films, (2.92 ± 0.02) × 1019 cm−3 (SnO2) and (1.63 ± 0.03) × 1020 cm−3 (FTO), caused by anionic substitution. It is confirmed that varying the temperature (K) enhances the electron transport properties. The obtained Seebeck coefficient (S) increases as the temperature is increased, up to 360 K. The synthesized films exhibit the S value of −234 ± 3 μV/K (SnO2) and −204 ± 3 μV/K (FTO) at 360 K. The estimated power factor (PF) drastically increases from ~70 (μW/m·K2) to ~900 (μW/m·K2) for the SnO2 and FTO film, respectively. [ABSTRACT FROM AUTHOR]

To produce highly efficient and repeatable perovskite solar cells (PSCs), comprehending interfacial loss and developing approaches to ameliorate interfacial features is essential. Nonradiative recombination at the SnO2–perovskite interface in SnO2-based perovskite solar cells (PSCs) leads to significant potential loss and variability in device performance. To improve the quality of the SnO2 electron transport layer, a novel polymer-doped SnO2 matrix, specifically using polyacrylic acid, was developed. This matrix is formed by spin-coating a SnO2 colloidal solution that includes polymers. The polymer aids in dispersing nanoparticles within the substrate and is evenly distributed in the SnO2 solution. As a result of the polymer addition, the density and wetting properties of the SnO2 layer substantially improved. Subsequently, perovskite-based photovoltaic devices comprising SnO2 and Spiro-OMeTAD layers and using (FAPbI3)0.97(MAPbBr3)0.03 perovskite are constructed. These optimized devices exhibited an increased efficiency of 17.2% when compared to the 15.7% power conversion efficiency of the control device. The incorporation of polymers in the electron transport layer potentially enables even better performance in planar perovskite solar cells. [ABSTRACT FROM AUTHOR]

Metallic transition-metal dichalcogenides are emerging as promising electrode materials for applications such as 2D electronic devices owing to their good electrical conductivity. In this study, a high-performance humidity sensor based on NbTe2 electrode material and an indium-doped SnO2 thin film sensing layer was fabricated using a pulsed laser deposition system. The morphology, structural, elemental compositions, and electrical properties of the as-deposited samples were characterized. Additionally, the humidity sensing response of the fabricated sensor with In-doped SnO2 (8:92 wt%) sensing film was evaluated in a wide range of relative humidity at room temperature. The results demonstrated that the humidity sensor based on In-doped SnO2 exhibited a high sensitivity of 103.1 Ω/%RH, fast response and recovery times, a low hysteresis value, good linearity, and repeatability. In addition, the sensor had good long-term stability, with a variation in impedance of less than 3%. The results indicated that the humidity sensor could be suitable for practical humidity sensing applications. [ABSTRACT FROM AUTHOR]

Tin oxide (SnO2) is a technologically important semiconductor with versatile applications. In particular, attention is being paid to nanostructured SnO2 materials for use as a part of the constituents in perovskite solar cells (PSCs), an emerging renewable energy technology. This is mainly because SnO2 has high electron mobility, making it favorable for use in the electron transport layer (ETL) in these devices, in which SnO2 thin films play a role in extracting electrons from the adjacent light-absorber, i.e., lead halide perovskite compounds. Investigation of SnO2 solution synthesis under diverse reaction conditions is crucial in order to lay the foundation for the cost-effective production of PSCs. This research focuses on the facile catalyst-free synthesis of single-nanometer-scale SnO2 nanocrystals employing an aromatic organic ligand (as the structure-directing agent) and Sn(IV) salt in an aqueous solution. Most notably, the use of an aromatic amino acid ester hydrochloride salt—i.e., phenylalanine methyl ester hydrochloride (denoted as L hereafter)—allowed us to obtain an aqueous precursor solution containing a higher concentration of ligand L, in addition to facilitating the growth of SnO2 nanoparticles as small as 3 nm with a narrow size distribution, which were analyzed by means of high-resolution transmission electron microscopy (HR-TEM). Moreover, the nanoparticles were proved to be crystallized and uniformly dispersed in the reaction mixture. The environmentally benign, ethanol-based SnO2 nanofluids stabilized with the capping agent L for the Sn(IV) ions were also successfully obtained and spin-coated to produce a SnO2 nanoparticle film to serve as an ETL for PSCs. Several SnO2 ETLs that were created by varying the temperature of nanoparticle synthesis were examined to gain insight into the performance of PSCs. It is thought that reaction conditions that utilize high concentrations of ligand L to control the growth and dispersion of SnO2 nanoparticles could serve as useful criteria for designing SnO2 ETLs, since hydrochloride salt L can offer significant potential as a functional compound by controlling the microstructures of individual SnO2 nanoparticles and the self-assembly process to form nanostructured SnO2 thin films. [ABSTRACT FROM AUTHOR]

Recently, metal halide perovskite-based top cells have shown significant potential for use in inexpensive and high-performance tandem solar cells. In state-of-the-art p-i-n perovskite/Si tandem devices, atomic-layer-deposited SnO2 has been widely used as a buffer layer in the top cells because it enables conformal, pinhole-free, and highly transparent buffer layer formation. In this work, the effects of various electrical properties of SnO2 and C60 layers on the carrier transport characteristics and the performance of the final devices were investigated using a numerical simulation method, which was established based on real experimental data to increase the validity of the model. It was found that the band alignment at the SnO2/C60 interface does, indeed, have a significant impact on the electron transport. In addition, as a general design rule, it was suggested that at first, the conduction band offset (CBO) between C60 and SnO2 should be chosen so as not to be too negative. However, even in a case in which this CBO condition is not met, we would still have the means to improve the electron transport characteristics by increasing the doping density of at least one of the two layers of C60 and/or SnO2, which would enhance the built-in potential across the perovskite layer and the electron extraction at the C60/SnO2 interface. [ABSTRACT FROM AUTHOR]

The aim of this work was to biosynthesize SnO2-decorated ZnO (ZT) nanocomposites (NCs) of different Sn content (10, 20, and 30 mol%), namely, ZT10, ZT20, and ZT30, using Olea europaea leaf aqueous extract-based phytocompounds as nanoparticle facilitating agents for application as effective photocatalyst in the removal of dyes from polluted water. The obtained ZT NCs were characterized using various techniques, including FTIR, XRD, TGA, TEM, EDS, UV–Vis, PL, and BET surface area. X-ray diffraction patterns show that rutile SnO2 and hexagonal ZnO coexist in the composites, and their crystallite size (D) is affected by the SnO2 ratio; the obtained D-values were 17.24, 19.07, 13.99, 6.45, and 12.30 nm for ZnO, SnO2, ZT10, ZT20, and ZT30, respectively. The direct band gaps of the ZT heterostructure increase with increasing SnO2 ratio (band gap = 3.10, 3.45, 3.14, 3.17, and 3.21 eV, respectively). TEM spectroscopy revealed nanorod and spherical grain morphologies of the composites, while EDS confirmed the elemental composition, the element ratio, and the composite's purity. All catalysts exhibit type III isotherm with macropore structure. The photocatalytic efficiency against cationic (methylene blue (MB), rhodamine B (RB)), and anionic (methyl orange (MO)) dyes, under sunlight, was optimal with ZT20. The results revealed almost complete degradation at 55, 65, and 55 min, respectively. Hence, it is evident that incorporating SnO2 improves the photocatalyst's performance, with an apparent optimal enhancement at 20 mol% Sn decorating ZT NCs. More interestingly, the catalyst stability and activity remained unaffected even after four activating cycles. [ABSTRACT FROM AUTHOR]