Search

The deformation characteristics and instability patterns of rotational landslides are complicated. Such landslides are large and occur continuously, seriously threatening people's lives. We used interferometry synthetic aperture radar (InSAR), digital elevation models of difference (DODs), numerical simulations, and other techniques for analyzing the topographic changes, surface deformation and movement process before, during and after a landslide. Based on the high-resolution terrain data before and after the landslide, the topographic changes were analyzed, and the active zone of the landslide was identified. The areas of the topographic changes were mainly located on the main scarp, toe and secondary landslides. The topographic changes were influenced by rainfall and rill erosion. The geomorphologically-guided InSAR interpretation method was applied to explore the displacement pattern. The deformation area in the middle of the landslide coincided with the secondary landslides. A time-series InSAR analysis revealed the dynamic evolution of the deformation before and after the landslide. Based on its evolution, the simulated landslide process included the main landslide and three secondary landslides. Based on the displacement of the longitudinal ground surface profiles, the displacement characteristics and kinematic behavior were summarized and compared with those of a single rotational landslide and multiple rotational landslides. The single rotational landslide had obvious secondary and progressive characteristics, developing into multiple rotational landslides triggered by conditions such as rainfall. [ABSTRACT FROM AUTHOR]

The integration of data from different sources can be very helpful in understanding the mechanism, the geometry, the kinematic, and the area affected by complex instabilities, especially when the available geotechnical information is limited. In this work, the suitability of different techniques for the study of a deep-seated landslide affecting a bridge in Alcoy (Spain) is evaluated. This infrastructure presents such severe damage that has rendered the bridge unusable, which prevents normal access to an important industrial area. Differential SAR Interferometry (DInSAR) and terrestrial Light Detection and Ranging (LiDAR) remote sensing techniques have been combined with ground displacement monitoring techniques, such as inclinometers and conventional geological and geotechnical investigation, electrical-seismic tomography, damage, and topographic surveys, to determine the boundaries, mechanism, and kinematics of the landslide. The successful case study that is illustrated in this work highlights the potential and the need for integrating multi-source data for the optimal management of complex landslides and the effective design of remedial measurements. [ABSTRACT FROM AUTHOR]