Search

Merocyanines with embedded butadiene structure in a cyclohexane scaffold are readily obtained by consecutive three-component alkynylation-addition sequences in moderate to excellent yield. Moreover, employing pyrrolidine as an amine provides a pseudo four-component synthesis of related cyanines by carbonyl condensation of the heterocyclic amine in excellent yield. While the merocyanines are essentially nonluminescent, pentamethine cyanines show luminescence with low quantum yield. TDDFT calculations using various exchange correlation hybrid functionals in the gas phase and explicit continuum of dichloromethane underline that the lowest energy absorption bands are highly solvent dependent for a merocyanine and cyanine model. The blue-shifted deviation from the experimental spectra agrees with related merocyanine and cyanine systems. The lowest energy absorption band of merocyanines contains n-π* character, which rationalizes the absence of luminescence. [ABSTRACT FROM AUTHOR]

The reaction of 2,2-dimethylpropane-1,3-diamine (dmpn) with an excess of concentrated aqueous hydrochloric acid yielded colorless crystals of 2,2-dimethylpropane-1,3-diaminium dichloride, dmpnH2Cl2 (1), in addition to small amounts of a monohydrate, dmpnH2Cl2∙H2O (2). The compounds were studied via X-ray crystallography, IR and Raman spectroscopy, NMR spectroscopy and thermal analysis. Single crystal structure determinations on 1 and 2 showed that dmpnH2Cl2 exists in two polymorphic forms, 1a and 1b. The crystal structure of 1b showed to be much more complex than that of 1a. In the crystal structure of 2, four (dmpnH2)2+ cations and eight chloride anions form a cage constructed by N−H∙∙∙Cl hydrogen bonds. In the center of these cages water dimers with a O∙∙∙O distance of 2.776 (8) Å are present. In addition, a conformational analysis of the 2,2-dimethylpropane-1,3-diaminium cation was performed. The results are compared to the experimental findings of 1a, 1b, 2 and other related hydrogen bonded salt structures from the Cambridge crystallographic structure database (CCDC). Last, a topological classification of the solid-state structures of 1a and 2 was performed and the simplified topological networks are discussed. [ABSTRACT FROM AUTHOR]

The structural chemistry of a series of dpmaH (dpmaH = (dimethylphosphoryl)methanaminium) salts has been investigated using constructor graph representations to visualize structural dependencies, covering the majority of known dpmaH salts. It is shown that the structurally related α-aminomethylphosphinic acid can be integrated in the systematology of the dpmaH salts. Those dpmaH salts with counter anions that are weak hydrogen bond acceptors (CIO4-, SnCl62-, IrCl62-,I-) tend to form head-to-tail hydrogen bonded moieties purely consisting of dpmaH+ cations as the primarily structural motif. In structures with weak to very weak hydrogen bonds between the dpmaH+ cations and the counter anions, the anions fill the gaps in the structures. In salts with medium to strong hydrogen bond acceptor counter ions (Cl-, NO3-, PdCl42-), the predominant structural motif is a double head-to-tail hydrogen bonded (dpmaH+)2 dimer. These dimeric units form further NH ⋯ X hydrogen bonds to neighboring counter anions X, which results in one-dimensional and two-dimensional architectures. [ABSTRACT FROM AUTHOR]

The new phosphine oxide compound, (dimethylphosphoryl)methanaminium perchlorate, dpmaHClO4 (1), was synthesized by the reaction of (dimethylphosphoryl) methanamine (dpma) with concentrated perchloric acid. (Dimethylphosphoryl)methanaminium perchlorate (dimethylphosphoryl)methanamine solvate, dpmaHClO4•dpma (2) was obtained by the slow evaporation of an equimolar methanolic solution of 1 and dpma at room temperature. For both compounds, single-crystal X-ray structures, IR and Raman spectra are reported. The assignment of the spectroscopic data were supported by quantum chemical calculations at the B3LYP/6-311G(2d,p) level of theory. In 1, the dpmaH cations form polymeric, polar double-strands along [010] by head to tail connections via N--H--O hydrogen bonds. The perchlorate anions are located between these strands attached by one medium strong and two weaker un-bifurcated hydrogen bonds (monoclinic, centrosymmetric space group C2/c, a = 17.8796(5) Å, b = 5.66867(14) Å, c = 17.0106(5) Å, β = 104.788(3)°, V = 1666.9(1) ų, Z = 8, T = 293 K, R(F) [I > 2σ(I)] = 0.0391, wR(F²) [all] = 0.1113). In 2, besides the N--H--O hydrogen bonds, medium strong N--H--N hydrogen bonds are present. One dpmaH cation and the neutral dpma molecule are connected head to tail by two N--H--O hydrogen bonds forming a monocationic cyclic unit. These cyclic units are further connected by N--H--O and N--H--N hydrogen bonds forming polymeric, polar double-strands along [001]. The perchlorate anions fill the gaps between these strands, and each [ClO4]-- anion is weakly connected to the NH2 group by one N--H--O hydrogen bond (orthorhombic, non-centrosymmetric space group Pca21 (No. 29), a = 18.5821(5) Å, b = 11.4320(3) Å, c = 6.89400(17) Å, V = 1464.50(6) ų, Z = 4, T = 100 K, R(F) [I > 2σ(I)] = 0.0234, wR(F²) [all] = 0.0575). Both structures are structurally related, and their commonalities are discussed in terms of a graph-set analysis. [ABSTRACT FROM AUTHOR]

The non-toxic inorganic antimicrobial agents iodine (I2) and copper (Cu) are interesting alternatives for biocidal applications. Iodine is broad-spectrum antimicrobial agent but its use is overshadowed by compound instability, uncontrolled iodine release and short-term effectiveness. These disadvantages can be reduced by forming complex-stabilized, polymeric polyiodides. In a facile, in-vitro synthesis we prepared the copper-pentaiodide complex [Cu(H2O)6(12-crown-4)5]I6 · 2I2, investigated its structure and antimicrobial properties. The chemical structure of the compound has been verified. We used agar well and disc-diffusion method assays against nine microbial reference strains in comparison to common antibiotics. The stable complex revealed excellent inhibition zones against C. albicans WDCM 00054, and strong antibacterial activities against several pathogens. [Cu(H2O)6(12-crown-4)5]I6 · 2I2 is a strong antimicrobial agent with an interesting crystal structure consisting of complexes located on an inversion center and surrounded by six 12-crown-4 molecules forming a cationic substructure. The six 12-crown-4 molecules form hydrogen bonds with the central Cu(H2O)6. The anionic substructure is a halogen bonded polymer which is formed by formal I5− repetition units. The topology of this chain-type polyiodide is unique. The I5− repetition units can be understood as a triodide anion connected to two iodine molecules. [ABSTRACT FROM AUTHOR]

A series of novel 3- and 5-biaryl-substituted isoxazoles was prepared by a rapid microwave-assisted four-component three-step synthesis: concatenating Sonogashira coupling, cyclocondensation, and Suzuki coupling in a one-pot fashion. The Pd-catalyst was successfully employed in the sense of a sequentially catalyzed process, i.e., without the addition of further catalyst loading. Biaryl-substituted isoxazoles with donor–acceptor decoration possess remarkable photophysical properties, such as high fluorescence quantum yields in solution up to ΦF = 0.86 and large Stokes shifts up to 10,000 cm−1. The experimental absorption and emission characteristics can be reproduced and rationalized by computations on the DFT (density functional theory) and TDDFT (time-dependent density functional theory) level of theory. [ABSTRACT FROM AUTHOR]

(3-Ammonio-2,2-dimethylpropyl)carbamate dihydrate was synthesised. The title compound was characterised by single crystal X-ray diffraction and IR-/Raman-spectroscopy. It has been demonstrated that amixture of dilute acetic acid and 2,2-dimethyl-1,3-diaminopropane is able to capture CO2 spontaneously from the atmosphere. An intramolecular hydrogen bond stabilises the conformation of the ylide-type title molecule. Intermolecular hydrogen bonds between all moieties connect them to a strand-type chain structure. [ABSTRACT FROM AUTHOR]

Two new polymorphs of the phase-change material sodium acetate were characterized by single-crystal X-ray diffraction. A tetragonal form was found first. It converted to a orthorhombic form after measurement of a single crystal of the tetragonal form at 100 K and subsequent warming to ambient temperature. Hirshfeld surface fingerprint plots show the different packing environments of the two new compared to the two known orthorhombic polymorphs Forms I and II. The accuracy and precision of the structures were improved compared to conventional independent atom model refinement through the use of aspherical scattering factors of the invariom database. We think that the layered nature of all sodium acetate forms, and the thereby limited (“quantized”) availability of vibrational modes, is related to the phenomenon of supersaturation, which is connected to its phase-change properties. [ABSTRACT FROM AUTHOR]