Search

This paper investigates the reconfigurable intelligent surface (RIS)-aided uplink multicell massive multiple-input multiple-output (mMIMO) communication system with transceiver hardware impairments (THWIs), and the practical and feasible two-timescale scheme is used to design the phase shifts of the RIS. We consider the Rician channel model and use maximal-ratio combining (MRC) technology to process the received signal at the base stations (BS). The expression of the uplink achievable rate is derived and analyzed. Moreover, the genetic algorithm (GA) is used to optimize the phase shifts of the RIS to maximize the data rate. Finally, the accuracy of the derived results is verified. The simulation results show that appropriately increasing the number of RIS reflecting elements can compensate for the performance loss caused by inter-cell interference and THWIs and reduce the demand for BS antennas, which can significantly reduce the hardware costs at the BS. [ABSTRACT FROM AUTHOR]

The capture effect is a frequently observed phenomenon in vehicular ad hoc networks (VANETs) communication. When conflicts arise during time slot access, failure to access does not necessarily occur; instead, successful access may still be achieved. The capture effect can enhance the likelihood of multiple access and improve communication efficiency. The security of VANETs communication is undoubtedly the primary concern. One crucial approach to enhance security involves the design of an efficient and reliable medium access control (MAC) protocol. Taking into account both aspects, we propose a novel framed slotted Aloha (FSA) MAC protocol model. Firstly, we derive the closed-form expression for the capture probability in the Rician fading channel in this paper. Subsequently, we analyze how the number of vehicles and time slots influence the success probability of vehicle access channels as well as examine the impact of the capture effect on this success probability. Then, under constraints regarding vehicle access channel success probability, we derive optimal values for slot numbers, access times, and transmission power while proposing a comprehensive implementation method to ensure high access channel success probabilities. We verify both theoretical derivations and proposed methods through simulation experiments. [ABSTRACT FROM AUTHOR]

This paper studies the performance of location-based beamforming with the presence of artificial noise (AN). Secure transmission can be achieved using the location information of the user. However, the shape of the beam depends on the number of antennas used. When the scale of the antenna array is not sufficiently large, it becomes difficult to differentiate the performance between the legitimate user and eavesdroppers nearby. In this paper, we leverage AN to minimize the area near the user with eavesdropping risk. The impact of AN is considered for both the legitimate user and the eavesdropper. Closed-form expressions are derived for the expectations of the signal to interference plus noise ratios (SINRs) and the bit error rates. Then, a secure beamforming scheme is proposed to ensure a minimum SINR requirement for the legitimate user and minimize the SINR of the eavesdropper. Numerical results show that, even with a small number of antennas, the proposed beamforming scheme can effectively degrade the performance of eavesdroppers near the legitimate user. [ABSTRACT FROM AUTHOR]

Energy efficiency (EE) is the main target of wireless communication nowadays. In this paper, we investigate hybrid precoding (HP) and massive multiple-input multiple-output (MIMO) systems for a high-altitude platform (HAP). The HAP is an emerging solution operating in the stratosphere at an amplitude of up to 20–40 km to provide communication facilities that can achieve the best features of both terrestrial and satellite systems. The existing hybrid beamforming solution on a HAP requires a large number of high-resolution phase shifters (PSs) to realize analog beamforming and radio frequency (RF) chains associated with each antenna and achieve better performance. This leads to enormous power consumption, high costs, and high hardware complexity. To address such issues, one possible solution that has to be tweaked is to minimize the number of PSs and RFs or reduce their power consumption. This study proposes an HP sub-connected low-resolution bit PSs to address these challenges while lowering overall power consumption and achieving EE. To significantly reduce the RF chain in a massive MIMO system, HP is a suitable solution. This study further examined adaptive cross-entropy (ACE), a machine learning-based optimization that optimizes the achievable sum rate and energy efficiency in the Rician fading channel for HAP massive MIMO systems. ACE randomly generates several candidate solutions according to the probability distribution (PD) of the elements in HP. According to their sum rate, it adaptively weights these candidates' HP and improves the PD in HP systems by minimizing the cross-entropy. Furthermore, this work suggests energy consumption analysis performance evaluation to unveil the fact that the proposed technique based on a sub-connected low-bit PS architecture can achieve near-optimum EE and sum rates compared with the previously reported methods. [ABSTRACT FROM AUTHOR]

Reconfigurable intelligent surface (RIS) has been envisioned as one of the promising solutions for enhancing signal transmissions in high-speed communications (HSC). In this paper, we present a time-varying channel model with distance-dependent Rician factors for the RIS-assisted HSC. Our model not only contains Rayleigh components and Doppler shift (DS) terms but also distance-dependent Rician factors, for characterizing time-varying features. In particular, we show that when the vehicle is far from the base station and the RIS, the channel contains only Rayleigh fading. However, when they are close enough, the channel can be considered as a light-of-sight channel. Based on the proposed model, it is proven that using RIS phase shift optimization, the DS of the cascaded links can be aligned with the DS of the direct link; and if the direct link is blocked, the DS can be removed entirely. Furthermore, we derive the closed-form expressions for the ergodic spectral efficiency and the outage probability of the proposed system. Besides, it is observed that the deployment strategy also affects the system performance. Simulation results validate all analyses. [ABSTRACT FROM AUTHOR]

In this paper, we consider a multiple reconfigurable intelligent surface (RIS)-assisted system using positioning information (PI) to explore the potential of Doppler effect mitigation and spectral efficiency (SE) enhancement in high-speed communications (HSC) in the presence of hardware impairments (HWI). In particular, we first present a general multi-RIS-assisted system model for HSC with HWI. Then, based on PI, different phase shift optimization strategies are designed and compared for maximizing SE, eliminating Doppler spread, and maintaining a very low delay spread. Moreover, we compare the performance of different numbers of RISs with HWI in terms of SE and delay spread. Finally, we extend our channel model from line-of-sight to the Rician channel to demonstrate the effectiveness and robustness of our proposed scheme. Numerical results reveal that the HWI of RISs increases the delay spread, but has no impact on Doppler shift and spread. Additionally, the multiple RIS system not only suffers a more severe delay spread, but is limited in SE due to the HWI. When the number of RISs increases from 2 to 16, the range of average spectral efficiency and delay spread are from 4 to 4.6 Bit/s/Hz and from 0.7 μs to 2.5 μs, respectively. In contrast to conventional RIS-assisted systems that require channel estimation, the proposed PI-based RIS system offers simplicity without compromising effectiveness and robustness in both SE enhancement and Doppler mitigation. [ABSTRACT FROM AUTHOR]

This paper investigates the outage performance of simultaneous wireless information and power transfer (SWIPT)-enabled relay networks with the decode-and-forward relaying protocol, where the effect of the energy triggering threshold at the relay on the system performance is considered. The closed-form expressions of the system outage probability and throughput are derived in Rician channel fading. Monte Carlo Simulation method is used to verify the accuracy of the derived closed-form expressions. The effects of some system parameters on the system performances are discussed via simulations, which show that the system outage probability increases with the increase of the minimum transmission rate required by the users and also decreases with the increase of the energy conversion efficiency. Besides, the system throughput increaseswith the increment of the transmit power of the source node, as well as the energy conversion efficiency. Additionally, the outage performance of the system with the equal two-hop distance is better than that of the system with unequal two-hop distance. [ABSTRACT FROM AUTHOR]

Active reconfigurable intelligent surface (ARIS) has sparked more attention due to its capability to overcome the impact of double fading. This paper introduces using an ARIS to aid non-orthogonal multiple access (NOMA) communications over cascade Rician fading channels, where the direct links between the base station and users are seriously blocked. By applying ARIS, it can amplify the superposed signals to overcome the double pass loss effect caused by passive RIS. Both ARIS and NOMA can have synergistic impacts on sixth-generation communication systems. New approximated and asymptotic expressions in terms of outage probability and ergodic data rate of the k-th user are deduced for ARIS-NOMA systems. Based on asymptotic analytical results, we further calculate the diversity order and high signal-to-noise ratio slope of the k-th user. Finally, the system throughput of ARIS-NOMA is discussed in the delay-constrained transmission mode. Monte Carlo numerical results are performed to verify that: (1) the outage behaviors of ARIS-NOMA are better than that of ARIS-assisted orthogonal multiple access (OMA); (2) as the impact of thermal noise caused by ARIS becomes larger, the communication performance from the base station to ARIS, then to users, becomes worse; (3) the ARIS-NOMA systems have the ability to provide the improved ergodic data rate relative to ARIS-OMA. [ABSTRACT FROM AUTHOR]

With the rapid development and evolvement of unmanned aerial vehicle (UAV) technology, UAV aided wireless communication technology has been widely studied recently. In this paper, a buffer aided multi-UAV relaying network is investigated to assist blocked ground communication. According to the mobility and implementation flexibility of UAV relays, it is assumed that the communication link between air-to-ground is the Rician fading channel. On the basis of information causality, we derive the state change of the information in the buffer of UAV relays and maximize the end-to-end average throughput by join the relay selection, UAV transmit power, and UAV trajectory optimization. However, the considered problem is a mixed integer non-convex optimization problem, and therefore, it is difficult to solve directly with general optimization methods. In order to make the problem tractable, an efficient iterative algorithm based on the block coordinate descent and the successive convex optimization techniques is proposed. The convergence of the proposed algorithm will be verified analytically at the end of this paper. The simulation results show that by alternately optimizing the relay selection, UAV transmit power, and UAV trajectory, the proposed algorithm is able to achieve convergence quickly and significantly improve the average throughput, as compared to other benchmark schemes. [ABSTRACT FROM AUTHOR]

In order to develop wireless sensor networks, which are defined by the IEEE 802.15.4 specification, researchers are considering low-power wide-area networks (LPWAN) due to their advantages of being long range, low power, low cost, and highly mobile. The issue of mobility is covered in the IEEE 802.15.4g standard for supporting a smart utility network (SUN), which is mainly controlled by orthogonal frequency-division multiplexing (OFDM) modulation. In a high mobility scenario, inter-carrier interference is a primary factor in reducing the performance of OFDM transmissions due to the destruction of the subcarrier component's orthogonality. This paper analyzes the mobility effect in multi-rate multi-regional orthogonal frequency-division multiplexing (MR-OFDM) for low-power wide-area networks in general, and the SUN MR-OFDM system in particular. As mentioned in standard 802.15.4 2015, IEEE 802.15.4g MR-OFDM is one of the low-power wide-area (LPWA) technologies in which energy optimization problems are of first priority. We are especially interested in simple technologies that provide high efficiency. Therefore, we propose a highly adaptive method that uses the cyclic prefix to mitigate the mobility effect in real time. At a symbol frames interval of 120 us, the Doppler shift effect from the mobility of the MR-OFDM system adapted smoothly. This is not the best method to mitigate Doppler shift but it is a simple method that suits the LPWA network. The proposed scheme clearly simulated the mobility of the MR-OFDM system, and had the advantage of using a cyclic-prefix with a bit error rate performance through Additive White Gaussian Noise (AWGN) and the Rician channel of Matlab. [ABSTRACT FROM AUTHOR]

Framed slotted aloha (FSA) is a multiple access protocol widely used in wireless communication for its simplicity and effectivity. The theoretical maximum channel utilization of FSA is approximately equal to 0.37 irrespective of the capture effect. In fact, the capture effect is a common phenomenon in wireless communication, which can increase the channel utilization. In this paper, we derive the closed-form expressions of capture probabilities under Rayleigh, Rician and Nakagami-m fading channels, respectively, and further give the optimal frame length which maximizes the channel utilization in the FSA-based networks. The numerical results are given for indicating the capture probabilities under different fading channels and their impacts on the optimal frame length and the maximum channel utilization. [ABSTRACT FROM AUTHOR]

This paper works on building an effective massive multi-input multi-output (MIMO) relay system by increasing the achievable sum rate and energy efficiency. First, we design a two-hop massive MIMO relay system instead of a one-hop system to shorten the distance and create a Line-of-Sight (LOS) path between relays. Second, we apply Rician channels between relays in this system. Third, we apply low-resolution Analog-to-Digital Converters (ADCs) at both relays to quantize signals, and apply Amplify-and-Forward (AF) and Maximum Ratio Combining (MRC) to the processed signal at relay R 1 and relay R 2 correspondingly. Fourth, we use higher-order statistics to derive the closed-form expression of the achievable sum rate. Fifth, we derive the power scaling law and achieve the asymptotic expressions under different power scales. Last, we validate the correctness of theoretical analysis with numerical simulation results and show the superiority of the two-hop relay system over the one-hop relay system. From both closed-form expressions and simulation results, we discover that the two-hop system has a higher achievable sum rate than the one-hop system. Besides, the energy efficiency in the two-hop system is higher than the one-hop system. Moreover, in the two-hop system, when quantization bits q   =   4 , the achievable sum rate converges. Therefore, deploying low-resolution ADCs can improve the energy efficiency and achieve a fairly considerable achievable sum rate. [ABSTRACT FROM AUTHOR]

Full-duplex (FD) is a promising technology for increasing the spectral efficiency of next-generation wireless communication systems. A major technical challenge in enabling FD in a real network is to remove the self-interference (SI) caused by simultaneous transmission and reception at the transceiver, and the SI cancellation performance depends significantly on the estimation accuracy of the SI channel. In this study, we proposed a novel partial SI channel training method for minimizing the residual SI power for FD massive multiple-input multiple-output (MIMO) systems. Based on an SI channel training framework under a limited training overhead, using the proposed scheme, the BS estimates only a part of the SI channel vectors, while skipping the channel training for the other remaining SI channel vectors by using their last estimates. With this partial training framework, the proposed scheme finds the optimal partial SI channel training strategy for pilot allocation to minimize the expected residual SI power, considering the time-varying Rician fading channel model for the SI channel. Therefore, the proposed scheme can improve the sum-rate performance compared with other simple partial training schemes for FD massive MIMO systems under a limited training overhead. Numerical results confirm the effectiveness of the proposed scheme for FD massive MIMO systems compared with the full training scheme, as well as other partial training schemes. [ABSTRACT FROM AUTHOR]

Non-orthogonal multiple access (NOMA) system can meet the demands of ultra-high data rate, ultra-low latency, ultra-high reliability and massive connectivity of user devices (UE). However, the performance of the NOMA system may be deteriorated by the hardware impairments. In this paper, the joint effects of in-phase and quadrature-phase imbalance (IQI) and imperfect successive interference cancellation (ipSIC) on the performance of two-way relay cooperative NOMA (TWR C-NOMA) networks over the Rician fading channels are studied, where two users exchange information via a decode-and-forward (DF) relay. In order to evaluate the performance of the considered network, analytical expressions for the outage probability of the two users, as well as the overall system throughput are derived. To obtain more insights, the asymptotic outage performance in the high signal-to-noise ratio (SNR) region and the diversity order are analysed and discussed. Throughout the paper, Monte Carlo simulations are provided to verify the accuracy of our analysis. The results show that IQI and ipSIC have significant deleterious effects on the outage performance. It is also demonstrated that the outage behaviours of the conventional OMA approach are worse than those of NOMA. In addition, it is found that residual interference signals (IS) can result in error floors for the outage probability and zero diversity orders. Finally, the system throughput can be limited by IQI and ipSIC, and the system throughput converges to a fixed constant in the high SNR region. [ABSTRACT FROM AUTHOR]