Search

Metasurface absorbers (MSAs) are of significant importance in a wide range of applications, such as in the field of stealth technology. Nevertheless, conventional designs demonstrate limited flexible characteristics and a lack of transparency, hence constraining their suitability for certain radar stealth applications. This study introduces a novel MSA operating in the broad microwave range, which exhibits both optical transparency and flexibility. The structure consists of a flexible substrate made of polyvinyl chloride (PVC), along with a resistive film composed of indium tin oxide (ITO). The proposed structure exhibits the ability to effectively absorb over 90% of the energy carried by incident electromagnetic (EM) waves across the frequency range of 9.85–41.76 GHz within an angular range of 0° to 60°. In addition, to assess the efficacy of the absorption performance, an examination of the radar cross-section (RCS) characteristics is conducted. The results indicate a reduction of over 10 dB across the aforementioned broad frequency spectrum, regardless of the central angle. [ABSTRACT FROM AUTHOR]

With the rapid development of terahertz radar technology, the electromagnetic device for terahertz radar cross-section (RCS) reduction is worth investigating. However, the existing research concentrates on the RCS reduction metasurface with fixed performance working in the microwave band. This paper proposes a terahertz dynamic coding metasurface integrated with vanadium dioxide (VO2) for dual-polarized, dual-band, and wide-angle RCS reduction. The simulation result indicates that by switching the state of the VO2 between insulator and metal, the metasurface can realize the effective RCS reduction at 0.18 THz to 0.24 THz and 0.21 THz to 0.39 THz under the left-handed and right-handed circularly polarized incident waves. When the polar and azimuth angles of the incident wave vary from 0° to 40° and 0° to 360° respectively, this metasurface can maintain a 10 dB RCS reduction. This work has potential value in the terahertz stealth field. [ABSTRACT FROM AUTHOR]

Modern stealth application systems require integrated meta-devices to operate effectively and have gained significant attention recently. This research paper proposes a 1-bit coding metasurface (CM) design. The fundamental component of the proposed CM is integrated to convert linearly polarized incoming electromagnetic waves into their orthogonal counterpart within frequency bands of 12.37–13.03 GHz and 18.96–32.37 GHz, achieving a polarization conversion ratio exceeding 99%. Furthermore, it enables linear-to-circular polarization conversion from 11.80 to 12.29, 13.17 to 18.44, and 33.33 to 40.35 GHz. A second element is produced by rotating a fundamental component by 90°, introducing a phase difference of π (pi) between them. Both elements are arranged in an array using a random aperiodic coding sequence to create a 1-bit CM for reducing the radar cross-section (RCS). The planar structure achieved over 10 dB RCS reduction for polarized waves in the frequency bands of 13.1–13.8 GHz and 20.4–30.9 GHz. A prototype was fabricated and tested, with the experimental results showing a good agreement with the simulated outcomes. The proposed design holds potential applications in radar systems, reflector antennas, stealth technologies, and satellite communication. [ABSTRACT FROM AUTHOR]

Traditional stealth technologies all have their problems such as high cost and large thickness. To solve the problems, we used novelty checkerboard metasurface in stealth technology. Checkerboard metasurface does not have as high conversion efficiency as radiation converters, but it has many advantages such as small thickness and low cost. So it is expected to overcome the problems of traditional stealth technologies. Unlike other checkerboard metasurfaces, we improved it further by using two types of polarization converter units to be arranged in turn to form a hybrid checkerboard metasurface. Because the checkerboard metasurface composed of one type of polarization converter units can have a relatively wide radar cross-section (RCS) reduction in bandwidth when two types of polarization converter units are arranged in turn to form a hybrid checkerboard metasurface and mutual compensation of the two polarization converter units can broaden RCS reduction band further. Therefore, by designing the metasurface to be independent from the polarization, the effect of RCS reduction can be insensitive to the polarization of the incoming EM waves. The experiment and simulation results showed the value of this proposed hybrid checkerboard metasurface for RCS reduction. Mutual compensation of the units is a new attempt in the field of checkerboard metasurfaces for stealth technology and proved to be effective. [ABSTRACT FROM AUTHOR]

An ultra wideband (UWB) radar cross-section (RCS) reduction metasurface has received attention in recent years. However, the majority of the research has concentrated on the physics and design of planar surfaces, which do not meet the standards of modern aerodynamics and aesthetics. In this paper, we offer a sophisticated strategy for designing a metasurface that can conform to the shape of any object, even those of moderate curvature, and can also achieve UWB RCS reduction by combining absorption, polarization conversion, and diffusion mechanisms. Firstly, an absorbing-polarization converter is designed, composed of a square patch with a truncated diagonal strip and ring. A thin Rogers RT/Duroid 5880 dielectric substrate layer is used in the structure, which is also appropriate for conformal conditions. The substrate layer and the ground plane are separated by an air gap to enhance the polarization conversion bandwidth (PCBW). For normal incident electromagnetic (EM) waves, the PCBW ranges from 10.8 to 31.3 GHz with polarization conversion ratio (PCR) values greater than 0.9 dB. Up to a 45 ∘ oblique incidence angle over the aforementioned band, the PCR efficiency is well maintained. Then, the optimized coding metasurface is formed by the Pancharatnam–Berry (PB) phase, consisting of meta-atoms "0" and "1" of the same size but different orientations, to realize the concept of cross-polarization diffusion. A theoretical investigation has been performed to analyze the RCS reduction performance of planar as well as conformal cylindrical surfaces. The results show that more than 10 dB of RCS reduction is experienced over UWB (10.8–31.3 GHz) for planar metasurfaces under linearly and circularly polarized incidence waves. Furthermore, the RCS reduction for cylindrical surfaces can be achieved in a similar frequency band above 10 dB up to an angle of 90 ∘ . It can be deduced that our proposed flexible metasurface can be used as an absorber or a polarization converter and provide broadband RCS reduction, which is essential for multi-function and conformal stealth applications. [ABSTRACT FROM AUTHOR]

This study aimed to investigate the compact 1-bit coding metamaterial design with various conventional and cuboid shapes by analysing the bistatic scattering patterns as well as the monostatic radar cross-section for microwave applications. The construction of this metamaterial design depends on binary elements. For example, 1-bit coding metamaterial comprises two kinds of unit cell to mimic both coding particles such as '0' and '1' with 0° and 180° phase responses. This study adopted a 1 mm × 1 mm of epoxy resin fibre (FR-4) substrate material, which possesses a dielectric constant of 4.3 and tangent loss of 0.025, to construct both elements for the 1-bit coding metamaterial. All simulations were performed using the well-known Computer Simulation Technology (CST) software. The elements were selected via a trial-and-error method based on the phase response properties of the designs. On the other hand, the phase response properties from CST software were validated through the comparison of the phase response properties of both elements with the analytical data from HFSS software. Clear closure was obtained from these findings, and it was concluded that the proposed conventional coding metamaterial manifested the lowest RCS values with an increasing number of lattices. However, the cuboid-shaped design with 20 lattices demonstrated an optimised bistatic scattering pattern of −8.49 dBm2. Additionally, the monostatic RCS values were successfully reduced within the 12 to 18 GHz frequency range with −30 to −10 dBm2 values. In short, the introduced designs were suitable for the proposed application field, and this unique phenomenon is described as the novelty of this study. [ABSTRACT FROM AUTHOR]

Multiple functionalities on a shared aperture are crucial for metasurfaces (MSs) in many applications. In this paper, we propose a coding-feeding metasurface (CFMS) with the multiple functions of high-gain radiation, orbital angular momentum (OAM) generation, and radar cross-section (RCS) reduction based on phase manipulation. The unit cell of the CFMS is composed of a rectangular emission patch and two quasi-Minkowski patches for reflective phase manipulation, which are on a shared aperture. The high-gain radiation and multiple modes of ±1, ±2, and ±3 OAM generation were realized by rationally setting the elements and the phase of their excitation. The CFMS presents a broadband RCS reduction of 8 dB from 3.18 GHz to 7.56 GHz for y-polarization and dual-band RCS reduction for x-polarization based on phase interference. To validate the concept of the CFMS, a prototype was fabricated and measured. The results of the measurement agree well with the simulation. A CFMS with the advantages of light weight and low profile has potential application in detection and wireless communication systems for stealth aircraft. [ABSTRACT FROM AUTHOR]

In this paper, a metamaterial absorber with a checkerboard patterned ITO (indium tin oxide) film as the surface is obtained by using flexible and optically transparent wave-absorbing material ITO–PET (polyethylene terephthalate), and a coding arrangement of two basic coding units based on the APS-PSO (Array Pattern Synthesis -Particle Swarm Optimization) algorithm. The surface structure of the absorber consists of ITO rectangular patch structures and ITO circular patch structures (110 Ω/sq). The ITO rectangular patch structures and ITO circular patch structures are symmetrical. The middle layer is made up of two layers of PET and one layer of PMMA, and the bottom surface is covered with a layer of low square resistance ITO film (8 Ω/sq). The experimental results, which are consistent with the simulation results, show that the absorber has superior performance: over 90% absorptance in the 5.06–9.01 GHz band, high transmittance, and a −10 dBsm RCS (radar cross-section) reduction in the 5.3–8.7 GHz band. This design also has polarization insensitivity and angular stability. [ABSTRACT FROM AUTHOR]

In this paper, we present a metasurface composed of complementary units that can realize orthogonal linear and linear-to-circular polarization conversion in multi-band. Linear polarization conversion has seven high-conversion frequency bands: 9.1–9.7 GHz, 15.6–17.6 GHz, 19.4–19.7 GHz, 21.2–23.1 GHz, 23.5–23.8 GHz, 26.2 GHz, and 27.9 GHz. Linear-to-circular polarization conversion also has seven frequency bands with axial ratios (ARs) less than 3 dB: 8.9–9.0 GHz, 9.9–14.7 GHz, 19.1–19.3 GHz, 23.2–23.35 GHz, 23.4 GHz, 24.1–25.4 GHz, and 27.2–27.8 GHz, with the generation of multiple bands extended by the combination of complementary units. Then, we utilize the combined polarization conversion unit's mirror placement to form a 4 × 4 array to realize the phase difference cancellation of the reflective field, giving the metasurface the radar cross section (RCS) reduction function and the dual-band 10-dB monostatic RCS reduction bandwidth: 8.9–9.7 GHz and 15.5–26.1 GHz. The measured and simulated results were essentially identical. Because the design uses the complementary units to form an array to expand the polarization conversion frequency bands, it provides a novel idea for future designs and can be applied to multiple microwave frequency bands. [ABSTRACT FROM AUTHOR]

This paper presents a dual-mechanism method to design a single-layer absorptive metasurface with wideband 20 dB RCS reduction by simultaneously combining the absorption and phase cancellation mechanisms. The metasurface comprises two kinds of absorbing unit cells with 10 dB absorption performance but different reflection phases. The impedance condition for 20 dB RCS reduction is theoretically analyzed considering both the absorption and the phase cancellation based on the two unit cells, and the relationship between the surface impedance and the reflection phase/amplitude is revealed. According to these analyses, two unit cells with absorption performance and different reflection phases are designed and utilized to realize the absorptive metasurface. Numerical and experimental results show that the single-layer absorptive metasurface features wideband 20 dB RCS within 11.5–16 GHz with a thickness of only 3 mm. [ABSTRACT FROM AUTHOR]

In this paper, we present a design of the linear polarization conversion metasurface (MS) for the broadband radar cross section (RCS) reduction based on split-ring resonator (SRR) structure in microwave region. The corresponding phase gradient can be obtained through the stable phase difference of basic units of polarization conversion MS. The designed polarization conversion MS is applied in coded electromagnetic (EM) matrix by defining two basic units "0" and "1", respectively. Based on the principle of planar array theory, a new random coding method named by matrix-type coding is proposed. Correlative RCS reduction mechanism is discussed and verified, which can be used to explore the RCS reduction characteristic. The simulated linear polarization conversion rate of the designed structure is up to 90% in the frequency range of 6–15 GHz, and the RCS reduction results verify the theoretical assumptions. Two kinds of matrix-type coding MS samples are prepared and measured. The experimental results indicate that the reflectance of MS is less than –10 dB on average under normal incidence in frequency range of 5.8–15.5 GHz. The average RCS reduction is essentially more than 10 dB in frequency range of 5.5–15 GHz and the corresponding relative bandwidth is 92.7%, which reasonably agrees with simulation. In addition, excellent RCS reduction characteristic of the designed MS can also be achieved over a wide incident angle. [ABSTRACT FROM AUTHOR]

A polarization-insensitive diffusion metasurface using a period-changed unit cell is presented for reducing the radar cross-section (RCS) of metallic objects in ultrawideband. Two metallic Minkowski loops are proposed as coding elements, different from traditional designs. The "0" element is constructed by period-changed unit cells to achieve a 180 ± 30° phase difference with the same reflection amplitude of nearly −0.9 dB in an ultrawideband from 7.1 to 29.2 GHz. Multilayer geometry with a thickness of 4.5 mm (about 0.105λ0 at the lowest operating frequency) and rotational symmetry loops are used to realize the ultrawideband characteristic and polarization-insensitive behavior. For verification, a polarization-insensitive diffusion metasurface is designed, fabricated, and measured. The simulated and measured results of the diffusion metasurface are in good consistency and the results both show that the metasurface enables a 10 dB backscattering reduction over an amazing ultrawideband ranging from 7.1 to 29.2 GHz (BW of 122%). [ABSTRACT FROM AUTHOR]

A quaternionic metasurface consisting of two pairs of units with destructive phase difference is proposed to extend the bandwidth of radar cross section (RCS) reduction. The two pairs of units are designed to have complementary phase-different bandwidth, which extends the bandwidth of RCS reduction. The overlaps of their bandwidth enhance the RCS reduction, resulting in a metasurface having broadband and strong RCS reduction. This design and the wideband RCS reduction of the quaternionic metasurface were verified by analytical calculation with superposition principle of electric field, numerical simulation with commercial software package CST Microwave Studio and experiment in microwave anechoic chamber. The scattering mechanism and the angular performance of the quaternionic metasurface were also investigated. [ABSTRACT FROM AUTHOR]

Communication with low radar signature platforms requires antennas with low backscatter, to uphold the low observability attribute of the platforms. In this work, we present the design for a Fabry–Perot (F-P) cavity antenna with low monostatic radar cross section (RCS) and enhanced gain. In addition, peak radiation is tilted inthe elevation plane. This is achieved by incorporating phase gradient metasurface (PGM) with absorptive frequency selective surface (FSS). The periodic surface of metallic square loops with lumped resistors forms the absorptive surface, placed on top of a partially reflecting surface (PRS) with an intervening air gap. The double-sided PRS consists of uniform metallic patches etched in a periodic fashion on its upper side. The bottom surface consists of variable-sized metallic patches, to realize phase gradient. The superstrate assembly is placed at about half free space wavelength above the patch antenna resonating at 6.6 GHz. The antenna's ground plane and PRS together construct the F-P cavity. A peak gain of 11.5 dBi is achieved at 13° tilt of the elevation plane. Wideband RCS reduction is achieved, spanning 5.6–16 GHz, for x- and y-polarizations of normally incident plane wave. The average RCS reduction is 13 dB. Simulation results with experimental verifications are presented. [ABSTRACT FROM AUTHOR]

Wind turbine towers produce significant scatterings when illuminated by radars. Their reflectivity affects air traffic control, military surveillance, vessel tracking, and weather data sensing processes. Reducing the radar cross-section (RCS) of wind turbines is an essential task when building wind farms. It has been proved that round and bumpy structures can scatter radar waves and reduce the RCS of a reflector. Other research showed that taper towers generate smaller radar returns than cylindrical towers. In this research, we combine both strategies to devise a more effective method for designing wind turbine towers in the hope that their RCS can be further reduced. The test results reveal that the proposed method out-performs current reshaping methods. Wind turbine towers possessing taper shapes and periodic surface bumps deflect incident electromagnetic waves to insignificant directions. Thus, radar returns in the back-scattering directions decrease. Other experiments also verify that the proposed method maintains its effectiveness for radar waves with varying frequencies and polarization. [ABSTRACT FROM AUTHOR]

This paper discusses the application of metasurfaces for three different classes of antennas: reconfiguration of surface-wave antenna arrays, realization of high-gain polarization-reconfigurable leaky-wave antennas (LWAs), and performance enhancement of van Atta retrodirective reflectors. The proposed surface-wave antenna is designed by embedding four square ring elements within a metasurface, which improves matching and enhances the gain when compared to conventional square-ring arrays. The design for linear polarization comprises of a 1 × 4 arrangement of ring elements, with a 0.56 λ spacing, placed amidst periodic patches. A 2 × 2 arrangement of ring elements is utilized for reconfiguration from linear to circular polarization, where a similar peak gain with better port isolation is realized. A prototype of the 2 × 2 array is fabricated and measured; a good agreement is observed between simulations and measurements. In addition, the concepts of the design of polarization-diverse holographic metasurface LWAs that form a pencil beam in the desired direction with a reconfigurable polarization are discussed. Moreover, recent developments incorporating polarization-reconfigurability in metasurface LWAs are briefly reviewed. In the end, the theory of van Atta arrays is outlined and their monostatic RCS is reviewed. A conventional retrodirective array is designed using aperture-coupled patch antennas with a microstrip-line feeding network, where the scattering from the structure itself degrades the performance of the reflector. This is followed by the integration of judiciously synthesized metasurfaces to reconfigure and improve the performance of retrodirective reflectarrays by removing the above-mentioned undesired scattering from the structure. [ABSTRACT FROM AUTHOR]

This paper proposes a gain-enhanced metamaterial (MM) absorber-loaded monopole antenna that reduces both radar cross-section and back radiation. To demonstrate the proposed idea, we designed a wire monopole antenna and an MM absorber. The MM absorber comprised lumped elements of subwavelength unit cells and achieved 90% absorbance bandwidth from 2.42–2.65 GHz. For low-profile configurations, the MM absorber was loaded parallel to and 10 mm from the monopole antenna, corresponding to 0.09 λ0 at 2.7 GHz. The monopole antenna resonated at 2.7 GHz with a 3.71 dBi peak gain and 2.65 GHz and 6.46 dBi peak gain, before and after loading the MM absorber, respectively. Therefore, including the MM absorber increased peak gain by 2.7 dB and reduced back radiation by 15 dB. The proposed antenna radar cross-section was reduced by 2 dB compared with a monopole antenna with an artificial magnetic conductor. [ABSTRACT FROM AUTHOR]

In this article, a single layer co-polarization broadband radar absorber is presented. Under normal incidence, it achieves at least 90% of absorption from 5.6 GHz to 9.1 GHz for both Transverse Electric (TE) and Transverse Magnetic (TM) polarizations. Our contribution and the challenge of this work is to achieve broadband absorption using a very thin single layer dielectric and it is achieved by rotating the resonating element by 45°. An original optimized Underlined U shape has been developed for the resonating element which provides a broadband co-polarization absorption. The structure is 12.7 times thinner than the wavelength at the center frequency. To understand the absorption mechanism, the transmission line model of an absorber and the three near unity absorption peaks at 5.87 GHz, 7.16 GHz and 8.82 GHz have been used to study the electric and magnetic fields. The physical insight of how the three near unity absorption peaks are achieved has also been discussed. After fabricating the structure, the measurements were found to be in good agreement with the simulation results. Furthermore, with the proposed original UUSR resonating element, the operational bandwidth to thickness ratio of 6.43 is obtained making the proposed UUSR very competitive. [ABSTRACT FROM AUTHOR]

A class of linear polarization conversion coding metasurfaces (MSs) based on a metal cut-wire structure is proposed, which can be applied to the reduction properties of radar cross section (RCS). We firstly present a hypothesis based on the principle of planar array theory, and then verify the RCS reduction characteristics using linear polarization conversion coding MSs by simulations and experiments. The simulated results show that in the frequency range of 6–14 GHz, the linear polarization conversion ratio reaches a maximum value of 90%, which is in good agreement with the theoretical predictions. For normal incident x- and y-polarized waves, RCS reduction of designed coding MSs 01/01 and 01/10 is essentially more than 10 dB in the above-mentioned frequency range. We prepare and measure the 01/10 coding MS sample, and find that the experimental results in terms of reflectance and RCS reduction are in good agreement with the simulated ones under normal incidence. In addition, under oblique incidence, RCS reduction is suppressed as the angle of incidence increases, but still exhibits RCS reduction effects in a certain frequency range. The designed MS is expected to have valuable potential in applications for stealth field technology. [ABSTRACT FROM AUTHOR]