Search

Within the genus Mycena, species exhibiting brownish basidiomata present considerable challenges in identification due to similar coloration. This study underscores the significance of pileipellis types and cheilocystidia characteristics as critical in delimiting brownish Mycena species. To clarify the principal taxonomic characters and their utility in distinguishing between brownish Mycena species, a morphological taxonomy and phylogenetic analysis were performed. Five new species from China were introduced and characterized through a comprehensive morphological anatomy and phylogenetic substantiation: M. campanulatihemisphaerica sp. nov., M. digitifurcata sp. nov., M. kunyuensis sp. nov., M. limitis sp. nov., and M. oryzifluens sp. nov. Discussions of these taxa are supplemented with morphological illustrations. The phylogenetic relationships were inferred using Bayesian Inference and Maximum Likelihood methods based on sequences from the internal transcribed spacer and the large subunit regions of nuclear ribosomal RNA. With the addition of these five new species, the worldwide count of brownish Mycena increases to 94, and a key to the 29 known species of brownish Mycena from China is presented. [ABSTRACT FROM AUTHOR]

In order to reduce the errors caused by the idealization of the conventional analytical model in the transient planar source (TPS) method, a finite element model that more closely represents the actual heat transfer process was constructed. The average error of the established model was controlled at below 1%, which was a significantly better result than for the analytical model, which had an average error of about 5%. Based on probabilistic optimization and heuristic optimization algorithms, an optimization model of the inverse heat transfer problem with partial thermal conductivity differential equation constraints was constructed. A Bayesian optimization algorithm with an adaptive initial population (BOAAIP) was proposed by analyzing the influencing factors of the Bayesian optimization algorithm upon inversion. The improved Bayesian optimization algorithm is not affected by the range and individuals of the initial population, and thus has better adaptability and stability. To further verify its superiority, the Bayesian optimization algorithm was compared with the genetic algorithm. The results show that the inversion accuracy of the two algorithms is around 3% when the thermal conductivity of the material is below 100 Wm − 1 K − 1 , and the calculation speed of the improved Bayesian optimization algorithm is three to four times faster than that of the genetic algorithm. [ABSTRACT FROM AUTHOR]

The rapid development of hydrogen fuel cells has been paralleled by increased demand for lightweight type IV hydrogen storage vessels with high hydrogen storage density, which raises the performance requirements of internal plastic liners. An appropriate manufacturing process is important to improve the quality of polymer liners. In this paper, DSC, WAXD, a universal testing machine and a differential pressure gas permeameter were used to investigate the effect of the cooling rate of the rotational molding polyamide 11 on the thermal, crystallization, mechanical and barrier properties. The cooling rate is formulated according to the cooling rate that can be achieved in actual production. The results suggest that two PA11 liner materials initially exhibited two-dimensional (circular) growth under non-isothermal crystallization conditions and shifted to one-dimensional space growth due to spherulite collision and crowding during the secondary crystallization stage. The slower the cooling process, the greater the crystallinity of the specimen. The increase in crystallinity significantly improved the barrier properties of the two PA11 liner materials, and the gas permeability coefficient was 2-3-fold higher than at low crystallinity. Moreover, the tensile strength, the tensile modulus, the flexural strength, and the flexural modulus increased, and the elongation at break decreased as the crystallinity increased. [ABSTRACT FROM AUTHOR]

This study optimized the laminate structure of a composite cylinder under the constraint of minimum layup thickness. Based on the progressive damage theory, a finite element model of the cylinder was established, and the NOL ring tensile test was used to verify the accuracy of the damage theory. The winding angle, the number of layers, and the helical/hoop ratio (the stacking sequence) were selected as the optimization factors, and the burst pressure value was used to evaluate the quality of the laminate structure. Then the orthogonal experiments were designed by RSM. Combined with FEA, the function model of the burst pressure of the gas cylinder and each optimization factor was established to obtain the optimal layering scheme, satisfying the minimum burst pressure. In addition, finite element analysis was used to verify the optimal scheme, demonstrating that the error of the burst pressure predicted by the quadratic model established by the response surface design was not more than 5%. This study provides a faster and more efficient optimization method for the optimization design of composite gas cylinder layers. [ABSTRACT FROM AUTHOR]

Simple Summary: Selenium Auricularia cornea culture (SAC) is a dried product via full fermentation, containing organic-Se, Auricularia cornea (AC) mycelium, and various metabolites of AC. The objective of this study was to evaluate whether SAC could effectively improve the health, growth, meat quality, and oxidative stability of meat in growing-finishing pigs. Currently, dietary SAC supplementation positively impacts growth performance and oxidative stability of fresh meat. Selenium Auricularia cornea culture (SAC) is a new source of organic selenium. Two experiments were conducted to determine the available energy of SAC fed to pigs and to evaluate the effects of dietary SAC supplementation on growth performance, serum biochemical profiles, fecal short chain fatty acids (SCFA), meat quality, tissue selenium concentration, and oxidative stability of fresh meat in growing-finishing pigs. In Experiment (Exp.) 1, 12 barrows with average body weight (BW) of 42.40 ± 5.30 kg were randomly allotted to two groups and fed the basal diet and SAC-supplemented diet, individually. In Exp. 2, 96 growing-finishing pigs (BW: 91.96 ± 7.55 kg) were grouped into four dietary treatments; each treatment contained six replicates with four pigs per replicate. The four treatments fed a control diet and three experimental diets supplemented with 0.6%, 1.2%, and 2.4% SAC, respectively. The trial lasted for 45 days. The results revealed that digestible energy (DE) of SAC was 11.21 MJ/kg. The average daily gain (ADG) was improved in pigs fed 1.2% and 2.4% SAC during day 24 to 45 and the overall period. Dietary 1.2% and 2.4% SAC supplementation had a lower F/G (p < 0.05) than the control diet during different stages. Dietary SAC supplementation increased fecal butyrate contents (p < 0.05), and pigs fed 1.2% and 2.4% SAC diets had a higher MCT1 mRNA expression (p = 0.04) in the colon. Pigs fed 2.4% SAC had higher GSH-Px contents (p < 0.05) in serum, liver, and longissimus dorsi muscle (LDM) than those in the control group. The 2.4% SAC-supplemented group revealed a higher Se content (p < 0.05) in LDM and a lower MDA concentration (p < 0.05) in fresh meat during the simulated retail display on day six. In conclusion, this study suggested that SAC was more effective in improving growth, enhancing the antioxidant status, depositing Se in muscle, and increasing meat oxidative stability of pigs. [ABSTRACT FROM AUTHOR]

Filament-wound composite tubular structures are frequently used in transmission systems, pressure vessels, and sports equipment. In this study, the failure mechanism of composite tubes reinforced with different fibres under low-velocity impact (LVI) and the radial residual compression performance of the impacted composite tubes were investigated. Four fibres, including carbon fiber-T800, carbon fiber-T700, basalt fibre, and glass fibre, were used to fabricate the composite tubes by the winding process. The internal matrix/fibre interface of the composite tubes before the LVI and their failure mechanism after the LVI were investigated by scanning electric microscopy and X-ray micro-computed tomography, respectively. The results showed that the composite tubes mainly fractured through the delamination and fibre breakage damage under the impact of 15 J energy. Delamination and localized fibre breakage occur in the glass fibre-reinforced composite (GFRP) and basalt fibre-reinforced composite (BFRP) tubes when subjected to LVI. While fibre breakage damage occurs globally in the carbon fibre-reinforced composite (CFRP) tubes. The GFRP tube showed the best impact resistance among all the tubes investigated. The basalt fibre-reinforced composite (BFRP) tube exhibited the lowest structural impact resistance. The impact resistance of the CFRP-T700 and CFRP-T800 tube differed slightly. The radial residual compression strength (R-RCS) of the BFRP tube is not sensitive to the impact, while that of the GFRP tube is shown to be highly sensitive to the impact. [ABSTRACT FROM AUTHOR]