Search

Molecularly Imprinted Polymers (MIPs) have specific recognition capabilities and have been widely used for electrochemical sensors with high selectivity. In this study, an electrochemical sensor was developed for the determination of p-aminophenol (p-AP) by modifying the screen-printed carbon electrode (SPCE) with chitosan-based MIP. The MIP was made from p-AP as a template, chitosan (CH) as a base polymer, and glutaraldehyde and sodium tripolyphosphate as the crosslinkers. MIP characterization was conducted based on membrane surface morphology, FT-IR spectrum, and electrochemical properties of the modified SPCE. The results showed that the MIP was able to selectively accumulate analytes on the electrode surface, in which MIP with glutaraldehyde as a crosslinker was able to increase the signal. Under optimum conditions, the anodic peak current from the sensor increased linearly in the range of 0.5–35 µM p-AP concentration, with sensitivity of (3.6 ± 0.1) µA/µM, detection limit (S/N = 3) of (2.1 ± 0.1) µM, and quantification limit of (7.5 ± 0.1) µM. In addition, the developed sensor exhibited high selectivity with an accuracy of (94.11 ± 0.01)%. [ABSTRACT FROM AUTHOR]

Pesticide is a pollution problem in agriculture. The usage of ZnCr2O4/CNS and H2O2 as additive in liquid fertilizer has potency for catalytic pesticide degradation. Colloid condition is needed for easy spraying. Rice husk and sawdust were used as carbon precursor and ZnCl2 as activator. The biomass-ZnCl2 mixtures were pyrolyzed using microwave (400-800 W, 50 min). The products were dispersed in water by blending then evaporated to obtain ZnO/CNS. The composites were reacted with KOH, CrCl3·6H2O, more ZnCl2, and little water by microwave (600 W, 5 min). The ZnCr2O4/CNS and H2O2 were used for degradation of buthylphenylmethyl carbamate (BPMC) in wet deactivated paddy soil. TOC was measured using TOC meter. The FTIR spectra of the ZnO/CNS composites indicated the completed carbonization except at 800 W without ZnCl2. The X-ray diffractograms of the composites confirmed ZnO/CNS structure. SEM images showed irregular particle shapes for using both biomass. ZnCr2O4/CNS structure was confirmed by XRD as the final product with crystallite size of 74.99 nm. The sawdust produced more stable colloids of CNS and ZnO/CNS composite than the rice husk. The pyrolysis without ZnCl2 formed more stable colloid than with ZnCl2. The ZnCr2O4/CNS from sawdust gave better dark catalytic degradation of BPMC than from rice husk, i.e., 2.5 and 1.6 times larger for 400 and 800 W pyrolysis, respectively. [ABSTRACT FROM AUTHOR]