Search

Expressing switched-inductor converter losses simply as a function of design variables is key for designers. Power losses in switched-inductor power supplies are varied in nature, and optimization schemes in the literature fail to account for all of them. Available core loss models are mostly empirical or rely on measurements or variables beyond the reach of power supply designers. Specifically, a simple core loss model is missing. This work offers complete design optimization of switched-inductor power supplies with a quadratic model of core loss that relies solely on design variables known to the designers—inductance and switching frequency (or inductor peak current). This model alleviates the burden of performing complex measurements to characterize the inductor—measurements that, moreover, require geometric data about the core, such as its size, which are often not disclosed by the manufacturer. Predicted minimum losses without approximation are within 3.2% of measured minimum losses, and predicted minimum losses with approximation are within 2.2% of measured minimum losses. [ABSTRACT FROM AUTHOR]

Distributed generation with a combustion engine prime mover is still widely used to supply electric power in a variety of applications. These applications range from backup power supply systems and combined wind-diesel generation to providing power in places where grid connection is either technically impractical or financially uneconomic. Modelling of such systems as a whole is extremely difficult due to the long-time load profiles needed and the computational difficulty of including small time-constant electrical dynamics with large time-constant mechanical dynamics. This paper presents the development of accelerated, reduced-order models of a distributed internal combustions engine generator unit. Overall these models are shown to achieve a massive improvement in the computational time required for long-time simulations while also achieving an extremely high level of dynamic accuracy. It is demonstrated how these models are derived, used and verified against benchmark models created using established techniques. Throughout the paper the modelling set as a whole, including multi level detail, is presented, detailed and finally summarised into a crucial tool for general system investigation and multiple target optimisation. [ABSTRACT FROM AUTHOR]

This paper presents a novel capacitor voltage balancing control approach for cascaded multilevel inverters with an arbitrary number of series-connected H-Bridge modules (floating capacitor modules) with asymmetric voltages, tiered by a factor of two (binary asymmetric). Using a nearest-level reference waveform, the balancing approach uses a one-step-ahead approach to find the optimal switching-state combination among all redundant switching-state combinations to balance the capacitor voltages as quickly as possible. Moreover, using a Lyapunov function candidate and considering LaSalle's invariance principle, it is shown that an offline calculated trajectory of optimal switching-state combinations for each discrete output voltage level can be used to operate (asymptotically stable) the inverter without measuring any of the capacitor voltages, achieving a novel sensorless control as well. To verify the stability of the one-step-ahead balancing approach and its sensorless variant, a demonstrator inverter with 33 levels is operated in grid-tied mode. For the chosen 33-level converter, the NPC main-stage and the individual H-bridge modules are operated with an individual switching frequency of about 1 kHz and 2 kHz, respectively. The sensorless approach slightly reduced the dynamic system response and, furthermore, the current THD for the chosen operating point was increased from 3.28 to 4.58 in comparison with that of using the capacitor voltage feedback. [ABSTRACT FROM AUTHOR]

Electrical grounding is an indispensable part of the power system network. The grounding system is mainly affected by grounding resistance and the nature of the soil. High ground resistance produces the phenomenon of soil ionization, surface arching, and back flashover. A conventional grounding system requires the deep digging of electrodes, thus creating maintenance difficulties. This research work focuses on the safe operation of an electric power system from external and internal impulses arising due to lightning strikes or short circuits. The study proposes an application of mineral samples as grounding materials, and bentonite is used as backfilling material in portable grounding systems. A detailed experimental analysis was conducted under controlled conditions to evaluate the performance of selected materials in high-resistance soil. The problem of a deeply driven electrode is addressed by designing the portable grounding system. The study results demonstrate that the proposed portable grounding system could be installed in troubled environments such as forests, deserts, and rocky terrains. To measure the breakdown voltages of the proposed samples, X-ray Diffraction (XRD) analysis and other laboratory tests were conducted. The electric field intensities are extracted through Finite Element Analysis (FEA). The experimental and simulation findings show the expected performance of mineral samples under various operating conditions. The findings of this study can guide the practitioners for safe and efficient operations of portable electrical grounding systems. [ABSTRACT FROM AUTHOR]

A new battery charger, based on a multiphase resonant converter, for a high-capacity 48 V LiFePO4 lithium-ion battery is presented. LiFePO4 batteries are among the most widely used today and offer high energy efficiency, high safety performance, very good temperature behavior, and a long cycle life. An accurate control of the charging current is necessary to preserve the battery health. The design of the charger is presented in a tight correlation with a battery model based on experimental data obtained at the laboratory. With the aim of reducing conduction losses, the general analysis of the inverter stage obtained from the parallel connection of N class D LCpCs resonant inverters is carried out. The study provides criteria for proper selection of the transistors and diodes as well as the value of the DC-link voltage. The effect of the leakage inductance of the transformer on the resonant circuit is also evaluated, and a design solution to cancel it is proposed. The output stage is based on a multi-winding current-doubler rectifier. The converter is designed to operate in open-loop operation as an input voltage-dependent current source, but in closed-loop operation, it behaves as a voltage source with an inherent maximum output current limitation, which provides high reliability throughout the whole charging process. The curve of efficiency of the proposed charger exhibits a wide flat zone that includes light load conditions. [ABSTRACT FROM AUTHOR]

Electronic applications use a wide variety of materials, knowledge, and devices, which pave the road to creative design, development, and the creation of countless electronic circuits with the purpose of incorporating them in electronic products. Therefore, power electronics have been fully introduced in industry, in applications such as power supplies, converters, inverters, battery chargers, temperature control, variable speed motors, by studying the effects and the adaptation of electronic power systems to industrial processes. Recently, the role of power electronics has been gaining special significance regarding energy conservation and environmental control. The reality is that the demand for electrical energy grows in a directly proportional manner with the improvement in quality of life. Consequently, the design, development, and optimization of power electronics and controller devices are essential to face forthcoming challenges. In this Special Issue, 19 selected and peer-reviewed papers discussing a wide range of topics contribute to addressing a wide variety of themes, such as motor drives, AC-DC and DC-DC converters, electromagnetic compatibility and multilevel converters. [ABSTRACT FROM AUTHOR]