Search

This work reports a modification of a fibrous cellulose material (paper) by the addition of polyacrylonitrile (PAN) fibres doped with 10,12–pentacosadiynoic acid (PDA). The fibres are sensitive to ultraviolet (UV) light. When the paper containing PAN–PDA is irradiated with UV light it changes colour to blue as a consequence of interaction of the light with PDA. The colour intensity is related to the absorbed dose, content of PAN–PDA fibres in the paper and the wavelength of UV radiation. The features of the paper are summarised after reflectance spectrophotometry and scanning microscopy analyses. All the properties of the modified paper were tested in accordance with adequate ISO standards. Moreover, a unique method for assessing the unevenness of the paper surface and the quality of printing was proposed by using a Python script (RGBreader) for the analysis of RGB colour channels. The modification applied to the paper can serve as a paper security system. The modified paper can act also as a UV radiation indicator. [ABSTRACT FROM AUTHOR]

Starch is an inexpensive, easily accessible, and widespread natural polymer. Due to its properties and availability, this polysaccharide is an attractive precursor for sustainable products. Considering its exploitation in adhesives and coatings, the major drawback of starch is its high affinity towards water. This study aims to explain the influence of the silane-starch coating on the hydrophobic properties of paper. The analysis of the organosilicon modified starch properties showed an enhanced hydrophobic behavior, suggesting higher durability for the coatings. Molecules of silanes with short aliphatic carbon chains were easily embedded in the starch structure. Longer side chains of silanes were primarily localized on the surface of the starch structure. The best hydrophobic properties were obtained for the paper coated with the composition based on starch and methyltrimethoxysilane. This coating also improved the bursting resistance and compressive strength of the tested paper. A static contact angle higher than 115° was achieved. PDA analysis confirmed the examined material exhibited high barrier properties towards water. The results extend the knowledge of the interaction of silane compositions in the presence of starch. [ABSTRACT FROM AUTHOR]

This article describes how crystalline or fibrous nanocellulose influences the mechanical properties of paper substrate. In this context, we used commercially available cellulose nanocrystals, mechanically prepared cellulose nanofibers dispersed in water or ethanol, and carboxy cellulose nanofibers. Selective reinforcement of the paper treated with the nanocellulose samples mentioned above was observed. The change in the fibre structure was assessed using scanning electron microscopy, roentgenography, and spectroscopy techniques. In addition, the effect of nanocellulose coating on physical properties was evaluated, specifically tensile index, elongation coefficient, Elmendorf tear resistance, Bendtsen surface roughness, Bendtsen air permeability, and bending strength. It can be concluded that the observed decrease in the strength properties of the paper after applying some NC compositions is due to the loss of potential disturbances in hydrogen bonds between the nanocellulose dispersed in ethanol and the paper substrate. On the other hand, significantly increased strength was observed in the case of paper reinforced with nanocellulose functionalized with carboxyl groups. [ABSTRACT FROM AUTHOR]