Search

Wire-arc additive manufacturing (WAAM) is a promising industrial production technique. Without optimization, inherent temperature gradients can cause powerful residual stresses and microstructural defects. There is therefore a need for data-driven methods allowing real-time process optimization for WAAM. This study focuses on machine learning (ML)-based prediction of temperature history for WAAM-produced aluminum bars with different geometries and process parameters, including bar length, number of deposition layers, and heat source movement speed. Finite element (FE) simulations are used to provide training and prediction data. The ML models are based on a simple multilayer perceptron (MLP) and performed well during baseline training and testing, giving a testing mean absolute percentage error (MAPE) of less than 0.7% with an 80/20 train–test split, with low variation in model performance. When using the trained models to predict results from FE simulations with greater length or number of layers, the MAPE increased to an average of 3.22% or less, with greater variability. In the cases of greatest difference, some models still returned a MAPE of less than 1%. For different scanning speeds, the performance was worse, with some outlier models giving a MAPE of up to 14.91%. This study demonstrates the transferability of temperature history for WAAM with a simple MLP approach. [ABSTRACT FROM AUTHOR]

Forests are one of the key elements in ecological transition policies in Europe. Sustainable forest management is needed in order to optimise wood harvesting, while preserving carbon storage, biodiversity and other ecological functions. Forest managers and public bodies need improved and cost-effective forest monitoring tools. Research studies have been carried out to assess the use of optical and radar images for producing forest height or biomass maps. The main limitations are the quantity, quality and representativeness of the reference data for model training. The Global Ecosystem Dynamics Investigation (GEDI) mission (full waveform LiDAR on board the International Space Station) has provided an unprecedented number of forest canopy height samples from 2019. These samples could be used to improve reference datasets. This paper aims to present and validate a method for estimating forest dominant height from open access optical and radar satellite images (Sentinel-1, Sentinel-2 and ALOS-2 PALSAR-2), and then to assess the use of GEDI samples to replace field height measurements in model calibration. Our approach combines satellite image features and dominant height measurements, or GEDI metrics, in a Support Vector Machine regression algorithm, with a feature selection process. The method is tested on mixed uneven-aged broadleaved and coniferous forests in France. Using dominant height measurements for model training, the cross-validation shows 7.3 to 11.6% relative Root Mean Square Error (RMSE) depending on the forest class. When using GEDI height metrics instead of field measurements for model training, errors increase to 12.8–16.7% relative RMSE. This level of error remains satisfactory; the use of GEDI could allow the production of dominant height maps on large areas with better sample representativeness. Future work will focus on confirming these results on new study sites, improving the filtering and processing of GEDI data, and producing height maps at regional or national scale. The resulting maps will help forest managers and public bodies to optimise forest resource inventories, as well as allow scientists to integrate these cartographic data into climate models. [ABSTRACT FROM AUTHOR]

Near surface (i.e., camera) and satellite remote sensing metrics have become widely used indicators of plant growing seasons. While robust linkages have been established between field metrics and ecosystem exchange in many land cover types, assessment of how well remotely-derived season start and end dates depict field conditions in arid ecosystems remain unknown. We evaluated the correspondence between field measures of start (SOS; leaves unfolded and canopy greenness > 0) and end of season (EOS) and canopy greenness for two widespread species in southwestern U.S. ecosystems with those metrics estimated from near-surface cameras and MODIS NDVI for five years (2012–2016). Using Timesat software to estimate SOS and EOS from the phenocam green chromatic coordinate (GCC) greenness index resulted in good agreement with ground observations for honey mesquite but not black grama. Despite differences in the detectability of SOS and EOS for the two species, GCC was significantly correlated with field estimates of canopy greenness for both species throughout the growing season. MODIS NDVI for this arid grassland site was driven by the black grama signal although a mesquite signal was discernable in average rainfall years. Our findings suggest phenocams could help meet myriad needs in natural resource management. [ABSTRACT FROM AUTHOR]

A detailed and accurate knowledge of land cover is crucial for many scientific and operational applications, and as such, it has been identified as an Essential Climate Variable. This accurate knowledge needs frequent updates. This paper presents a methodology for the fully automatic production of land cover maps at country scale using high resolution optical image time series which is based on supervised classification and uses existing databases as reference data for training and validation. The originality of the approach resides in the use of all available image data, a simple pre-processing step leading to a homogeneous set of acquisition dates over the whole area and the use of a supervised classifier which is robust to errors in the reference data. The produced maps have a kappa coefficient of 0.86 with 17 land cover classes. The processing is efficient, allowing a fast delivery of the maps after the acquisition of the image data, does not need expensive field surveys for model calibration and validation, nor human operators for decision making, and uses open and freely available imagery. The land cover maps are provided with a confidence map which gives information at the pixel level about the expected quality of the result. [ABSTRACT FROM AUTHOR]

The exploitation of new high revisit frequency satellite observations is an important opportunity for agricultural applications. The Sentinel-2 for Agriculture project S2Agri (http://www.esa-sen2agri.org/SitePages/Home.aspx) is designed to develop, demonstrate and facilitate the Sentinel-2 time series contribution to the satellite EO component of agriculture monitoring for many agricultural systems across the globe. In the framework of this project, this article studies the construction of a dynamic cropland mask. This mask consists of a binary "annual-cropland/no-annual-cropland" map produced several times during the season to serve as a mask for monitoring crop growing conditions over the growing season. The construction of the mask relies on two classical pattern recognition techniques: feature extraction and classification. One pixel- and two object-based strategies are proposed and compared. A set of 12 test sites are used to benchmark the methods and algorithms with regard to the diversity of the agro-ecological context, landscape patterns, agricultural practices and actual satellite observation conditions. The classification results yield promising accuracies of around 90% at the end of the agricultural season. Efforts will be made to transition this research into operational products once Sentinel-2 data become available. [ABSTRACT FROM AUTHOR]

Developing better agricultural monitoring capabilities based on Earth Observation data is critical for strengthening food production information and market transparency. The Sentinel-2 mission has the optimal capacity for regional to global agriculture monitoring in terms of resolution (10-20 meter), revisit frequency (five days) and coverage (global). In this context, the European Space Agency launched in 2014 the "Sentinel-2 for Agriculture" project, which aims to prepare the exploitation of Sentinel-2 data for agriculture monitoring through the development of open source processing chains for relevant products. The project generated an unprecedented data set, made of "Sentinel-2 like" time series and in situ data acquired in 2013 over 12 globally distributed sites. Earth Observation time series were mostly built on the SPOT4 (Take 5) data set, which was specifically designed to simulate Sentinel-2. They also included Landsat 8 and RapidEye imagery as complementary data sources. Images were pre-processed to Level 2A and the quality of the resulting time series was assessed. In situ data about cropland, crop type and biophysical variables were shared by site managers, most of them belonging to the "Joint Experiment for Crop Assessment and Monitoring" network. This data set allowed testing and comparing across sites the methodologies that will be at the core of the future "Sentinel-2 for Agriculture" system. [ABSTRACT FROM AUTHOR]

The leaf area index (LAI) and the fraction of photosynthetically active radiation absorbed by green vegetation (FAPAR) are essential climatic variables in surface process models. FCOVER is also important to separate vegetation and soil for energy balance processes. Currently, several LAI, FAPAR and FCOVER satellite products are derived moderate to coarse spatial resolution. The launch of Sentinel-2 in 2015 will provide data at decametric resolution with a high revisit frequency to allow quantifying the canopy functioning at the local to regional scales. The aim of this study is thus to evaluate the performances of a neural network based algorithm to derive LAI, FAPAR and FCOVER products at decametric spatial resolution and high temporal sampling. The algorithm is generic, i.e., it is applied without any knowledge of the landcover. A time series of high spatial resolution SPOT4-HRVIR (16 scenes) and Landsat 8 (18 scenes) images acquired in 2013 over the France southwestern site were used to generate the LAI, FAPAR and FCOVER products. For each sensor and each biophysical variable, a neural network was first trained over PROSPECT+SAIL radiative transfer model simulations of top of canopy reflectance data for green, red, near-infra red and short wave infra-red bands. Our results show a good spatial and temporal consistency between the variables derived from both sensors: almost half the pixels show an absolute difference between SPOT and LANDSAT estimates of lower that 0.5 unit for LAI, and 0.05 unit for FAPAR and FCOVER. Finally, downward-looking digital hemispherical cameras were completed over the main land cover types to validate the accuracy of the products. Results show that the derived products are strongly correlated with the field measurements (R2 > 0.79), corresponding to a RMSE = 0.49 for LAI, RMSE = 0.10 (RMSE = 0.12) for black-sky (white sky) FAPAR and RMSE = 0.15 for FCOVER. It is concluded that the proposed generic algorithm provides a good basis to monitor the seasonal variation of the vegetation biophysical variables for important crops at decametric resolution. [ABSTRACT FROM AUTHOR]

Cropland mapping relies heavily on field data for algorithm calibration, making it, in many cases, applicable only at the field campaign scale. While the recently launched Sentinel-2 satellite will be able to deliver time series over large regions, it will not really be compatible with the current mapping approach or the available in situ data. This research introduces a generic methodology for mapping annual cropland along the season at high spatial resolution with the use of globally available baseline land cover and no need for field data. The methodology is based on cropland-specific temporal features, which are able to cope with the diversity of agricultural systems, prior information from which mislabeled pixels have been removed and a cost-effective classifier. Thanks to the JECAM network, eight sites across the world were selected for global cropland mapping benchmarking. Accurate cropland maps were produced at the end of the season, showing an overall accuracy of more than 85%. Early cropland maps were also obtained at three-month intervals after the beginning of the growing season, and these showed reasonable accuracy at the three-month stage (>70% overall accuracy) and progressive improvement along the season. The trimming-based method was found to be key for using spatially coarse baseline land cover information and, thus, avoiding costly field campaigns for prior information retrieval. The accuracy and timeliness of the proposed approach shows that it has substantial potential for operational agriculture monitoring programs. [ABSTRACT FROM AUTHOR]

Crop area extent estimates and crop type maps provide crucial information for agricultural monitoring and management. Remote sensing imagery in general and, more specifically, high temporal and high spatial resolution data as the ones which will be available with upcoming systems, such as Sentinel-2, constitute a major asset for this kind of application. The goal of this paper is to assess to what extent state-of-the-art supervised classification methods can be applied to high resolution multi-temporal optical imagery to produce accurate crop type maps at the global scale. Five concurrent strategies for automatic crop type map production have been selected and benchmarked using SPOT4 (Take5) and Landsat 8 data over 12 test sites spread all over the globe (four in Europe, four in Africa, two in America and two in Asia). This variety of tests sites allows one to draw conclusions applicable to a wide variety of landscapes and crop systems. The results show that a random forest classifier operating on linearly temporally gap-filled images can achieve overall accuracies above 80% for most sites. Only two sites showed low performances: Madagascar due to the presence of fields smaller than the pixel size and Burkina Faso due to a mix of trees and crops in the fields. The approach is based on supervised machine learning techniques, which need in situ data collection for the training step, but the map production is fully automatic. [ABSTRACT FROM AUTHOR]

With the ever-increasing number of satellites and the availability of data free of charge, the integration of multi-sensor images in coherent time series offers new opportunities for land cover and crop type classification. This article investigates the potential of structural biophysical variables as common parameters to consistently combine multi-sensor time series and to exploit them for land/crop cover classification. Artificial neural networks were trained based on a radiative transfer model in order to retrieve high resolution LAI, FAPAR and FCOVER from Landsat-8 and SPOT-4. The correlation coefficients between field measurements and the retrieved biophysical variables were 0.83, 0.85 and 0.79 for LAI, FAPAR and FCOVER, respectively. The retrieved biophysical variables' time series displayed consistent average temporal trajectories, even though the class variability and signal-to-noise ratio increased compared to NDVI. Six random forest classifiers were trained and applied along the season with different inputs: spectral bands, NDVI, as well as FAPAR, LAI and FCOVER, separately and jointly. Classifications with structural biophysical variables reached end-of-season overall accuracies ranging from 73%-76% when used alone and 77% when used jointly. This corresponds to 90% and 95% of the accuracy level achieved with the spectral bands and NDVI. FCOVER appears to be the most promising biophysical variable for classification. When assuming that the cropland extent is known, crop type classification reaches 89% with spectral information, 87% with the NDVI and 81%-84% with biophysical variables. [ABSTRACT FROM AUTHOR]

Temperate forests are under climatic and economic pressures. Public bodies, NGOs and the wood industry are looking for accurate, current and affordable data driven solutions to intensify wood production while maintaining or improving long term sustainability of the production, biodiversity, and carbon sequestration. Free tools and open access data have already been exploited to produce accurate quantitative forest parameters maps suitable for policy and operational purposes. These efforts have relied on different data sources, tools, and methods that are tailored for specific forest types and climatic conditions. We hypothesized we could build on these efforts in order to produce a generic method suitable to perform as well or better in a larger range of settings. In this study we focus on building a generic approach to create forest parameters maps and confirm its performance on a test site: a maritime pine (Pinus pinaster) forest located in south west of France. We investigated and assessed options related with the integration of multiple data sources (SAR L- and C-band, optical indexes and spatial texture indexes from Sentinel-1, Sentinel-2 and ALOS-PALSAR-2), feature extraction, feature selection and machine learning techniques. On our test case, we found that the combination of multiple open access data sources has synergistic benefits on the forest parameters estimates. The sensibility analysis shows that all the data participate to the improvements, that reach up to 13.7% when compared to single source estimates. Accuracy of the estimates is as follows: aboveground biomass (AGB) 28% relative RMSE, basal area (BA) 27%, diameter at breast height (DBH) 20%, age 17%, tree density 24%, and height 13%. Forward feature selection and SVR provided the best estimates. Future work will focus on validating this generic approach in different settings. It may prove beneficial to package the method, the tools, and the integration of open access data in order to make spatially accurate and regularly updated forest structure parameters maps effortlessly available to national bodies and forest organizations. [ABSTRACT FROM AUTHOR]