Search

The primary characteristic of ablative materials is their fire resistance. This study explored the development of cost-effective ablative materials formed into application-specific shapes by using a polymer matrix reinforced with ceramic powder. A thermoplastic (polypropylene; PP) and a thermoset (polyester; UPE) matrix were used to manufacture ablative materials with 50 wt% silicon carbide (SiC) particles. The reference composites (50 wt% SiC) were compared to those with 1 and 3 wt% short glass fibers (0.5 mm length) and to composites using a 1 and 3 wt% glass fiber mesh. Fire resistance was tested using a butane flame (900 °C) and by measuring the transmitted heat with a thermocouple. Results showed that the type of polymer matrix (PP or UPE) did not influence fire resistance. Composites with short glass fibers had a fire-resistance time of 100 s, while those with glass fiber mesh tripled this resistance time. The novelty of this work lies in the exploration of a specific type of material with unique percentages of SiC not previously studied. The aim is to develop a low-cost coating for industrial warehouses that has improved fire-protective properties, maintains lower temperatures, and enhances the wear and impact resistance. [ABSTRACT FROM AUTHOR]

Anaerobic adhesives (AAs) cure at room temperature in oxygen-deprived spaces between metal substrates. The curing process is significantly influenced by the type of metal ions present. This study investigates the curing kinetics of a high-strength AA on iron and copper substrates using differential scanning calorimetry (DSC). The activation energy and kinetic parameters were determined with different empiric models, revealing that curing on copper is faster and more complete compared to iron. The findings suggest that copper ions lower the activation energy required for curing, enhancing the adhesive's performance. This research addresses the gap in understanding how metal ions affect AA curing kinetics, offering valuable insights for optimizing adhesive formulations for industrial applications. [ABSTRACT FROM AUTHOR]

This study addresses the challenge of recycling adhesive bonds, as their disassembly is irreversible and damages the substrates. It explores the use of thermally expandable particles (TEPs), which, when heated, expand and weaken the bond. The magnetization of TEPs allows us to control their distribution using a magnetic field. The work aims to obtain magnetized TEPs, study their influence on resin curing, mechanical performance, and durability, test their mobility in graded bonds, and analyze the temperature-induced debonding process. TEPs are characterized using various techniques, including differential scanning calorimetry, nuclear magnetic resonance, and scanning electron microscopy. Additionally, the impact of 25 wt.% TEPs on epoxy resin curing is examined using the Kamal model. Adhesion and disassembly assessments were conducted through tensile shear tests using single-lap-joint specimens, while the bond durability was determined via wedge testing. It was found that magnetization reduces the debonding time, though it decreases shear strength while increasing bond durability. The crack formation energy is higher with magnetic TEPs, and total crack length is lower in long-term wedge tests. Once debonded, the substrates are sanded and reused as raw material. [ABSTRACT FROM AUTHOR]

This study investigates the feasibility of using a composite material comprising slate reinforced with cork sheets for architectural purposes like facades and wall coverings. The research involves the comprehensive characterisation of both slate and cork materials along with the evaluation of the silicone adhesive used in their bonding process, specifically Sikasil® HT from SIKA®. It was found that both slate and cork exhibited low wettability, which was enhanced through cold plasma treatment. Subsequently, a composite sandwich structure was fabricated and subjected to impact testing in a drop tower, along with fire resistance evaluations. The fire tests revealed that when subjected to a flame of 900 °C for 15 min, the slate alone heated rapidly, reaching 500 °C within 3 min on the side opposite to the flame. However, the sandwich structure reached 260 °C on the cork side (opposite to the flame) at 7.5 min, maintaining this temperature until the deterioration or detachment of the cork between 11 and 12 min. This provided insulation and delayed ignition. The sandwich structure maintained its fire resistance due to the insulating properties of cork and the superior thermal resistance of silicone compared to other adhesives up to 260 °C. Overall, the results suggest the potential suitability of this sandwich structure for architectural applications. Its favourable adhesion properties and acceptable fire resistance indicate that it could serve as a viable alternative for construction materials in architectural contexts. [ABSTRACT FROM AUTHOR]

Because of the high demand for carbon fiber reinforced polymer (CFRP) materials across all industries, the reuse and/or recycling of these materials (rCFRP) is necessary in order to meet the principles of the circular economy, including recycling and reuse. The objective of this study is to estimate the lifespan of thermoplastic matrix composite materials reinforced with waste materials (CFRP), which undergo only a mechanical cutting process. This estimation is carried out through the thermal decomposition of polymers, including polymer matrix composite materials, which is a complex process due to the numerous reactions involved. Some authors calculate these kinetic parameters using thermogravimetric analysis (TGA) as it is a quick method, and it allows the identification of gases released during decomposition, provided that the equipment is prepared for it. This study includes a comparison between polyamides 11 and 12, as well as between polyamide composite materials with carbon fiber (CF) and polyamides reinforced with CF/epoxy composite material. The latter is treated with plasma to improve adhesion with polyamides. The behavior of weight as a function of temperature was studied at speeds of 3, 6, 10, 13, 17, and 20 °C/min, finding stability of the polyamides up to a temperature of 400 °C, which was consistent with the analysis by mass spectroscopy, where gas evolution is evident after 400 °C. The estimation of the lifespan was carried out using two different methods including the Toop equation and the free kinetics model (MFK). The energy of the decomposition process was determined using the MFK model, which establishes the energy as a function of the degree of conversion. It is estimated that at 5% decomposition, mechanical properties are lost. [ABSTRACT FROM AUTHOR]

Woven flax-carbon hybrid polyamide biocomposites offer a blend of carbon fibers' mechanical strength and flax's environmental advantages, potentially developing material applications. This study investigated their thermal behavior, degradation kinetics, and durability to water uptake and relative humidity exposure and compared them with pure flax and carbon composites with the same matrix. The hybrid composite exhibited intermediate water/moisture absorption levels between pure flax and carbon composites, with 7.2% water absorption and 3.5% moisture absorption. It also displayed comparable thermal degradation resistance to the carbon composite, effectively maintaining its weight up to 300 °C. Further analysis revealed that the hybrid composite exhibited a decomposition energy of 268 kJ/mol, slightly lower than the carbon composite's value of 288.5 kJ/mol, indicating similar thermal stability. Isothermal lifetime estimation, employing the activation energy (Ed) and degree of conversion facilitated by the Model Free Kinetics method, indicated a 41% higher service life of the hybrid laminate at room temperature compared to the carbon laminate. These insights are crucial for understanding the industrial applications of these materials without compromising durability. [ABSTRACT FROM AUTHOR]

Cavitation erosion poses a significant challenge in fluid systems like hydraulic turbines and ship propellers due to pulsed pressure from collapsing vapor bubbles. To combat this, various materials and surface engineering methods are employed. In this study, nano and micro scale particles of silicon carbide (SiC) or boron carbide (B4C) were incorporated as reinforcement at 6% and 12% ratios, owing to their exceptional resistance to abrasive wear and high hardness. Microparticles were incorporated to assess the damage incurred during the tests in comparison to nanoparticles. Wear tests were conducted on both bulk samples and coated aluminum sheets with a 1mm of composite. Additionally, cavitation tests were performed on coated aluminum tips until stability of mass loss was achieved. The results indicated a distinct wear behavior between the coatings and the bulk samples. Overall, wear tended to be higher for the coated samples with nanocomposites than bulk, except for the nano-composite material containing 12% SiC and pure resin. With the coatings, higher percentages of nanometric particles correlated with increased wear. The coefficient of friction remained within the range of 0.4 to 0.5 for the coatings. Regarding the accumulated erosion in the cavitation tests for 100 min, it was observed that for all nanocomposite materials, it was lower than in pure resin. Particularly, the composite with 6% B4C was slightly lower than the rest. In addition, the erosion rate was also lower for the composites. [ABSTRACT FROM AUTHOR]

Chemically speaking, polyamide 11 (PA11) and polyamide 12 (PA12) have a similar backbone, differing only in one carbon. From an origin point of view, PA11 is considered a bioplastic polyamide composed from renewable resources, compared to oil-based PA12. Each of them has a number of advantages over the other, which makes their selection a challenging issue. Depending on the target application, diverse assessments and comparisons are needed to fulfill this mission. The current study addresses this research gap to characterize and compare PA11 and PA12 manufactured by the hot press technique in terms of their mechanical, thermal and durability properties for the first time, demonstrating their potential for future works as matrices in composite materials. In this regard, different characterization techniques are applied to the hot-pressed polymer sheets, including X-ray diffraction (XRD), differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The mechanical performance of the PA11 and PA12 sheets is compared based on tensile tests and shore hardness measurement. The durability behavior of these two polyamides is evaluated in water and relative humidity conditions at different aging times. The experimental results show the ductile behavior of PA12 with respect to the quasi-brittle PA11. Both have a relatively small water and moisture gain: 1.5 wt% and 0.8 wt%, respectively. The higher crystallinity of PA12 (2.1 times more than PA11) with γ-phase is one of the leading parameters to achieve better mechanical and durability properties. The FTIR spectra displayed slight acid hydrolysis. Accordingly, absorbed water or moisture does not cause plasticization; thus, neither hardness nor dimension changes. [ABSTRACT FROM AUTHOR]

Through this study, two different natural fibres green composites were characterised from the point of view of mechanical properties and durability. These green polymers allow manufacturing with a respectful life cycle due to their biodegradable or recyclable character. Composite materials were prepared in a hot plates press with two biopolymeric matrices, green low density polyethylene (GPE) and polybutylene succinate (PBS). As reinforcement, Atmospheric Pressure Plasma Torch (APPT) treated and untreated unidirectional woven flax were used. Mechanical properties were evaluated by tensile tests and the adhesion between matrices and reinforcement by peeling tests. The durability of each composite was analysed by water absorption measurements, Fourier Transform Infrared Spectroscopy (FTIR) analysis and tensile tests, during several aging times, up to 60 days, under high temperature and humidity conditions. The influence of the Atmospheric Pressure Plasma Torch treatment (APPT) was evaluated in all studies. It was found that GPE composites present better durability against aging conditions than PBS materials, due to the tendency of polyester to hydrolyse compared to the good resistance to humidity of polyolefins. The adhesion between matrices and reinforcement improves with APPT treatment. This improvement is more evident by avoiding the absorption of water than in the mechanical properties results, where only a slightly improvement is shown. [ABSTRACT FROM AUTHOR]