Search

This investigation examined how the Bacillus vallismortis laccase (rBVL-MRL522) influenced the physicochemical characteristics, structural attributes, and functional capabilities of both dough and noodles. Incorporating rBVL-MRL522 (1 U/g) did not lead to a substantial change in the water absorption of wheat flour. However, the introduction of rBVL-MRL522 caused a significant elongation in the formation time of wheat flour dough, extending it by 88.9%, and also resulted in a 50% increase in the stabilization duration of wheat flour dough. Furthermore, adding rBVL-MRL522 led to a proportional rise in both the elastic and viscous moduli (G" of the dough, signifying that r-BVL (rBVL-MRL522) has a beneficial effect on the gluten strength of the dough. Integrating rBVL-MRL522 promoted the consolidation of the gluten-based cross-linked structure within the dough, decreasing the size of starch particles and, more evenly, the dispersion of these starch particles. In the noodle processing, adding rBVL-MRL522 at a rate of 1 U/g raised the L* value of the noodles by 2.34 units compared to the noodles prepared without the inclusion of rBVL-MRL522. Using a greater amount of rBVL-MRL522 (2 U/g) substantially increased the hardness of the noodles by 51.31%. Additionally, rBVL-MRL522 showed a noteworthy enhancement in the elasticity, cohesiveness, and chewiness of the noodles. In conclusion, rBVL-MRL522 promoted the cross-linking gluten, leading to a more extensive and condensed three-dimensional network structure in raw and cooked noodles. As a result, this study offers valuable insights into the environmentally friendly processing of dough and associated products. [ABSTRACT FROM AUTHOR]

In the chemical industry, 1,4-diethylene dioxide, commonly called dioxane, is widely used as a solvent as well as a stabilizing agent for chlorinated solvents. Due to its high miscibility, dioxane is a ubiquitous water contaminant. This study investigates the effectiveness of catalyst- and ultrasound (US)-assisted persulfate (PS) activation with regard to degrading dioxane. As a first step, a composite catalyst was prepared using zeolite. A sonochemical dispersion and reduction method was used to dope zeolite with iron nanoparticles (FeNP/Z). In the subsequent study, the reaction kinetics of dioxane degradation following the single-stage and two-stage addition of PS was examined in the presence of a catalyst. Using GC-MS analysis, intermediate compounds formed from dioxane degradation were identified, and plausible reaction pathways were described. Upon 120 min of sonication in the presence of a catalyst with a two-stage injection of PS, 95% 100 mg/L dioxane was degraded. Finally, the estimated cost of treatment is also reported in this study. Sonolytically activated PS combined with a FeNP/Z catalyst synergizes the remediation of biorefractory micropollutants such as dioxane. [ABSTRACT FROM AUTHOR]

Ganoderic Acid (GA), a major bioactive compound isolated from the East Asian medicinal mushroom Ganoderma tsugae, is traditionally believed to have significant medicinal properties. GA is poorly soluble in water, which poses several challenges in terms of its formulation. In this study, Ganoderma tsugae extracts obtained through ethanol extraction were encapsulated in nanodispersions via ultrasonic cavitation and solvent evaporation to increase their bioavailability. The preparation route was thoroughly analyzed using Response Surface Methodology (RSM) to determine the interactions between the variables. Based on the results, the Hydrophilic–Lipophilic Balance (HLB) and the evaporation temperature significantly influenced the resulting particle size. In the optimized nanodispersions, GA was incorporated into a hydrophobic core with a particle size no greater than 200 nm and a very narrow particle distribution (namely, a polydispersity index of 0.289). Due to the high negative zeta potential (−45.9 mV), a very slow particle growth rate of 0.239% over short-term storage (14 days) was achieved. In addition, the zeta average remained virtually unchanged for 14 days at room temperature in solutions at different pH levels. In summary, this paper provides the first-ever demonstration that ultrasound cavitation in conjunction with solvent evaporation can be used to generate GA nanodispersions. [ABSTRACT FROM AUTHOR]

The delivery of drugs via transdermal routes is an attractive approach due to ease of administration, bypassing of the first-pass metabolism, and the large skin surface area. However, a major drawback is an inability to surmount the skin's stratum corneum (SC) layer. Therefore, techniques reversibly modifying the stratum corneum have been a classical approach. Surmounting the significant barrier properties of the skin in a well-organised, momentary, and harmless approach is still challenging. Chemical permeation enhancers (CPEs) with higher activity are associated with certain side effects restricting their advancement in transdermal drug delivery. Furthermore, complexity in the interaction of CPEs with the skin has led to difficulty in elucidating the mechanism of action. Nevertheless, CPEs-aided transdermal drug delivery will accomplish its full potential due to advancements in analytical techniques, synthetic chemistry, and combinatorial studies. This review focused on techniques such as drug–vehicle interaction, vesicles and their analogues, and novel CPEs such as lipid synthesis inhibitors (LSIs), cell-penetrating peptides (CPPs), and ionic liquids (ILs). In addition, different types of microneedles, including 3D-printed microneedles, have been focused on in this review. [ABSTRACT FROM AUTHOR]

This study effectively demonstrates the sonochemical synthesis of visible-light-responsive Cu-ZnO/TiO2 ternary Z-scheme heterojunction nanocomposite photocatalyst. The as-prepared photocatalyst was comprehensively characterized by techniques including high-resolution transmission electron microscopy (HRTEM), field emission scanning electron microscopy (FE-SEM) with energy dispersive X-ray analysis (EDX) and elemental dot mapping, X-ray diffraction (XRD), UV-Vis-diffuse reflectance spectroscopy (UV-Vis-DRS), Brunauer–Emmett–Teller (BET) surface area, and Fourier-transform infrared spectroscopy (FTIR). The photocatalytic activity of the Cu-ZnO/TiO2 nanocomposite photocatalyst was assessed for the degradation of Congo red (CR), an azo dye, under direct sunlight. The pseudo-first-order rate constant for CR degradation was found to be 0.09 min−1. The outcome implies that the synthesised nanocomposite photocatalyst demonstrates excellent photocatalytic activity under direct sunlight as 98% degradation of CR dye was achieved in approximately 20 min using the Cu-ZnO/TiO2 nanocomposite photocatalyst. Furthermore, its high recoverability and reusability of five times indicate its excellent catalytic potential. [ABSTRACT FROM AUTHOR]

With growing consumer demand for natural products, greener extraction techniques are found to be potential alternatives especially for pharmaceutical, nutraceutical, and cosmetic manufacturing industries. Cavitation-based technology has drawn immense attention as a greener extraction method, following its rapid and effective extraction of numerous natural products compared to conventional techniques. The advantages of cavitation-based extraction (CE) are to eliminate the application of toxic solvents, reduction of extraction time and to achieve better extraction yield, as well as purity. The cavitational phenomena enhance the extraction efficiency via increased mass transfer rate between the substrate and solvent, following the cell wall rupture, due to the intense implosion of bubbles. This review includes a detailed overview of the ultrasound-assisted extraction (UAE), negative pressure cavitation (NPC) extraction, hydrodynamic cavitation extraction (HCE) and combined extractions techniques which have been implemented for the extraction of high-value-added compounds. A list of essential parameters necessary for the maximum possible extraction yield has been discussed. The optimization of parameters, such as ultrasonic power density, frequency, inlet pressure of HC, extraction temperature and the reactor configuration denote their significance for better efficiency. Furthermore, the advantages and drawbacks associated with extraction and future research directions have also been pointed out. [ABSTRACT FROM AUTHOR]

Catalysts increase reaction rates; however, the surface area to volume ratio of catalysts has a vital role in catalytic activity. The noble metals such as platinum (Pt) and gold (Au) are expensive; despite this, they have proven their existence in catalysis, motivating the synthesis of supported metal catalysts. Metal catalysts need to be highly dispersed onto the support. In this investigation, an ultrasound approach has been attempted to synthesise highly photoactive titanium dioxide (TiO2) nanoparticles by the hydrolysis of titanium tetraisopropoxide in an acetone/methanol mixture. To enhance its photocatalytic activity, TiO2 was doped with Pt. The synthesised photocatalyst was characterised by techniques such as particle size analysis (PSA), XRD, FE-SEM, TEM, and EDX. The enhancement in the surface characteristics of Pt-doped TiO2 compared with bare TiO2 support was confirmed with Brunauer–Emmett–Teller (BET) analysis. The enhanced surface area and uniformity in particle size distribution at the nanoscale level were due to the effects of ultrasonic irradiation. The obtained results corroborated the size and composition of the synthesised catalysts. The size of the catalysts is in the nanometre range, and good dispersion of Pt catalysts over the TiO2 support was observed. The UV-Visible spectroscopy analysis was performed to study the optical properties of the synthesised TiO2 and Pt/TiO2 photocatalysts. An increase in the absorbance was noted when Pt was added to TiO2, which is due to the decrease in the band gap energy. [ABSTRACT FROM AUTHOR]

The detection of cancer biomarkers in the early stages could prevent cancer-related deaths significantly. Nanomaterials combined with biomolecules are extensively used in drug delivery, imaging, and sensing applications by targeting the overexpressed cancer proteins such as folate receptors (FRs) to control the disease by providing earlier treatments. In this investigation, biocompatible reduced graphene oxide (rGO) nanosheets combined with folic acid (FA)-a vitamin with high bioaffinity to FRs-is utilized to develop an electrochemical sensor for cancer detection. To mimic the cancer cell environment, FR-β protein is used to evaluate the response of the rGO-FA sensor. The formation of the rGO-FA nanocomposite was confirmed through various characterization techniques. A glassy carbon (GC) electrode was then modified with the obtained rGO-FA and analyzed via differential pulse voltammetry (DPV) for its specific detection towards FRs. Using the DPV technique, the rGO-FA-modified electrode exhibited a limit of detection (LOD) of 1.69 pM, determined in a linear concentration range from 6 to 100 pM. This excellent electrochemical performance towards FRs detection could provide a significant contribution towards future cancer diagnosis. Moreover, the rGO-FA sensing platform also showed excellent specificity and reliability when tested against similar interfering biomolecules. This rGO-FA sensor offers a great promise to the future medical industry through its highly sensitive detection towards FRs in a fast, reliable, and economical way. [ABSTRACT FROM AUTHOR]

The highly infectious coronavirus disease 2019 (COVID-19) associated with the pathogenic severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has spread to become a global pandemic. At present, the world is relying mainly on containment and hygiene-related measures, as well as repurposed drugs to control the outbreak. The development of COVID-19 vaccines is crucial for the world to return to pre-pandemic normalcy, and a collective global effort has been invested into protection against SARS-CoV-2. As of March 2021, thirteen vaccines have been approved for application whilst over 90 vaccine candidates are under clinical trials. This review focuses on the development of COVID-19 vaccines and highlights the efficacy and vaccination reactions of the authorised vaccines. The mechanisms, storage, and dosage specification of vaccine candidates at the advanced stage of development are also critically reviewed together with considerations for potential challenges. Whilst the development of a vaccine is, in general, in its infancy, current progress is promising. However, the world population will have to continue to adapt to the "new normal" and practice social distancing and hygienic measures, at least until effective vaccines are available to the general public. [ABSTRACT FROM AUTHOR]

The 20th century has witnessed a remarkable enhancement in the demand for varieties of consumer products, ranging from food, pharmaceutical, cosmetics, to other industries. To enhance the quality of the product and to reduce the production cost, industries are gradually inclined towards greener processing technologies. Cavitation-based technologies are gaining interest among processing technologies due to their cost effectiveness in operation, minimization of toxic solvent usage, and ability to obtain superior processed products compared to conventional methods. Also, following the recent advancements, cavitation technology with large-scale processing applicability is only denoted to the hydrodynamic cavitation (HC)-based method. This review includes a general overview of hydrodynamic cavitation-based processing technologies and a detailed discussion regarding the process effectiveness. HC has demonstrated its usefulness in food processing, extraction of valuable products, biofuel synthesis, emulsification, and waste remediation, including broad-spectrum contaminants such as pharmaceuticals, bacteria, dyes, and organic pollutants of concern. Following the requirement of a specific process, HC has been implemented either alone or in combination with other process-intensifying steps, for example, catalyst, surfactant, ultraviolet (UV), hydrogen peroxide (H2O2), and ozone (O3), for better performance. The reactor set-up of HC includes orifice, slit venturi, rotor-stator, and sonolator type constrictions that initiate and control the formation of bubbles. Moreover, the future directions have also been pointed out with careful consideration of specific drawbacks. [ABSTRACT FROM AUTHOR]

Many wounds are unresponsive to currently available treatment techniques and therefore there is an immense need to explore suitable materials, including biomaterials, which could be considered as the crucial factor to accelerate the healing cascade. In this study, we fabricated polyhydroxyalkanoate-based antibacterial mats via an electrospinning technique. One-pot green synthesized graphene-decorated silver nanoparticles (GAg) were incorporated into the fibres of poly-3 hydroxybutarate-co-12 mol.% hydroxyhexanoate (P3HB-co-12 mol.% HHx), a co-polymer of the polyhydroxyalkanoate (PHA) family which is highly biocompatible, biodegradable, and flexible in nature. The synthesized PHA/GAg biomaterial has been characterized by field emission scanning electron microscopy (FESEM), elemental mapping, thermogravimetric analysis (TGA), UV-visible spectroscopy (UV-vis), and Fourier transform infrared spectroscopy (FTIR). An in vitro antibacterial analysis was performed to investigate the efficacy of PHA/GAg against gram-positive Staphylococcus aureus (S. aureus) strain 12,600 ATCC and gram-negative Escherichia coli (E. coli) strain 8739 ATCC. The results indicated that the PHA/GAg demonstrated significant reduction of S. aureus and E. coli as compared to bare PHA or PHA- reduced graphene oxide (rGO) in 2 h of time. The p value (p < 0.05) was obtained by using a two-sample t-test distribution. [ABSTRACT FROM AUTHOR]