Search

Polyethersulfone-sulfonated polyethersulfone (PES-SPES)/NaY zeolite/nylon sandwich structure membranes were prepared and used to adsorb Cu2+ from water. The adsorption kinetics, adsorption isotherm, dynamic adsorption experiment, and reusability were discussed. The experimental data showed that the Langmuir isotherm model, Dubinin–Radushkevich (D-R) isotherm model, and the pseudo-first-order kinetic model can well represent the adsorption of Cu2+ on the membrane, indicating an ion exchange mechanism, with the maximum adsorption capacity of 111.25 mg·g−1. Repeatability experiments show that the sandwich film still has good adsorption performance after five times of adsorption and desorption. The as-prepared membrane showed considerable separation performance in removing Cu2+ from aspirin solution, providing a feasible method to remove heavy metals from drugs. [ABSTRACT FROM AUTHOR]

Rice grain yield is a complex and highly variable quantitative trait consisting of several key components, including the grain weight, the effective panicles per unit area, and the grain number per panicle (GNPP). The GNPP is a significant contributor to grain yield controlled by multiple genes (QTL) and is crucial for improvement. Attempts have been made to find genes for this trait, which has always been a challenging and arduous task through conventional methods. We combined a BSA analysis, RNA profiling, and a metabolome analysis in the present study to identify new candidate genes involved in the GNPP. The F2 population from crossing R4233 (high GNPP) and Ce679 (low GNPP) revealed a frequency distribution fitting two segregated genes. Three pools, including low, middle, and high GNPP, were constructed and a BSA analysis revealed six candidate regions spanning 5.38 Mb, containing 739 annotated genes. Further, a conjunctive analysis of BSA-Seq and RNA-Seq showed 31 differentially expressed genes (DEGs) in the candidate intervals. Subsequently, a metabolome analysis showed 1024 metabolites, with 71 significantly enriched, including 44 up and 27 downregulated in Ce679 vs. R4233. A KEGG enrichment analysis of these 31 DEGs and 71 differentially enriched metabolites (DEMs) showed two genes, Os12g0102100 and Os01g0580500, significantly enriched in the metabolic pathways' biosynthesis of secondary metabolites, cysteine and methionine metabolism, and fatty acid biosynthesis. Os12g0102100, which encodes for the alcohol dehydrogenase superfamily and a zinc-containing protein, is a novel gene whose contribution to the GNPP is not yet elucidated. This gene coding for mitochondrial trans-2-enoyl-CoA reductase is involved in the biosynthesis of myristic acid, also known as tetradecanoic acid. The Os01g0580500 coding for the enzyme 1-aminoclopropane-1-carboxylate oxidase (OsACO7) is responsible for the final step of the ethylene biosynthesis pathway through the conversion of 1-aminocyclopropane-1-carboxylic acid (ACC) into ethylene. Unlike Os12g0102100, this gene was significantly upregulated in R4233, downregulated in Ce679, and significantly enriched in two of the three metabolite pathways. This result pointed out that these two genes are responsible for the difference in the GNPP in the two cultivars, which has never been identified. Further validation studies may disclose the physiological mechanisms through which they regulate the GNPP in rice. [ABSTRACT FROM AUTHOR]

High-protein rice is nutritional, but its taste attributes are inferior to low-protein rice. Many documents correlate its taste attributes with its gelatinization and retrogradation properties. This study investigated the changes in gelatinization and retrogradation properties of low- and high-amylose reconstituted rice flour (RRF) added with different fractions of proteins extracted from high-protein rice. The addition of protein decreased the RVA (rapid viscosity analyzer) viscosity parameters of the RRF but increased the peak time. The high amylose fractions in the RRF mainly increased the parameters PV, FV, SB, and peak times, and scarcely affected the parameters BD and PaT. The interaction between amylose and protein determined the pasting temperature. Protein addition in RRF significantly decreased gelatinization enthalpies but increased the onset temperature (To) and peak temperature (Tp), while the amylose in RRF increased the gelatinization enthalpies, To and Tp. Protein additions decreased the gel hardness and the pore size, while the amylose increased the gel hardness but decreased pore size. Our findings may be potentially useful in breeding and cultivating high-protein rice. [ABSTRACT FROM AUTHOR]

Amylose content (AC) is the major indicator of rice eating and cooking quality (ECQ). Its synthesis in rice endosperm is mainly regulated by the protein, granule-bound starch synthase 1, which is encoded by the waxy gene (Os06g0133000, LOC_Os06g04200). The diversity of AC is largely attributable to the allelic variation at the Wx locus and the development of effective and accurate functional molecular markers to target rice variant alleles is crucial in the breeding strategy. In the present study, we developed six pairs of penta-primer amplification refractory mutation system (PARMS) markers to distinguish between Wxlv, Wxa, Wxin, Wxb, Wxmp, and Wxop,hp. These markers were successfully used to screen the genotype of large assets of genetic resources including 98 wild accessions, 55 cultivars, and 22 parental lines. Our results showed that Wxb in a low AC type was predominant in Guangxi cultivated rice as a result of cultural preference, while Wxlv in the wild accessions. Moreover, our findings surprisingly revealed the presence of Wxb in wild accession, which is a new outcome that may contribute to understanding the origin, selection and domestication processes of rice. These functional markers could be effectively used in marker-assisted breeding to improve selection efficiency of cultivars with desired AC in the early generation. [ABSTRACT FROM AUTHOR]

The fluid leakage channel found in contact mechanical seals belongs to the microchannel category. Thus, upon further inspection, the influence of surface wettability and other factors neglected in previous studies becomes obvious. The porous leakage model of contact mechanical seals considering the surface wettability presented in this paper was based on the Cassie model and slip theory. The variations of the microchannel slip length and the velocity under various wettability conditions were studied and the relationship between the slip length and the apparent contact angle was established. Moreover, using porous media theory, the theoretical model of the leakage rate in contact mechanical seals considers the surface wettability depending on various parameters. The observed parameters included the surface contact angle, sealing medium pressure, viscosity coefficient, fractal dimension, and maximum pore diameter. The simulation results obtained using the proposed model have shown that the leakage rate increases with the increase of the apparent contact angle. Particularly when the contact pressure is small, the influence of the surface wettability is more significant. Furthermore, the leakage rate results obtained via the proposed model were compared to those of existing models. The comparison confirmed that the proposed model is applicable and that the necessity of considering wettability significantly affects the leakage rate calculation accuracy. The proposed model lays a foundation for further improving the calculation accuracy, making it easier for both the researchers and practitioners to suppress the leakage in contact mechanical seals. [ABSTRACT FROM AUTHOR]

Anthocyanin is a flavonoid compound with potential antioxidant properties beneficial to human health and sustains plant growth and development under different environmental stresses. In black rice, anthocyanin can be found in the stems, leaves, stigmas, and caryopsis. Although the anthocyanin biosynthesis in rice has been extensively studied, limited knowledge underlying the storage mechanism and transporters is available. This study undertook the complementation of computational and transcriptome analysis to decipher a potential multidrug and toxic compound extrusion (MATE) gene candidate for anthocyanin transportation in black rice caryopsis. The phylogenetic analysis showed that OsMATE34 has the same evolutionary history and high similarities with VvAM1, VvAM3, MtMATE2, SlMATE/MTP77, RsMATE8, AtFFT, and AtTT12 involved in anthocyanin transportation. RNA sequencing analysis in black caryopsis (Bc; Bc11, Bc18, Bc25) and white caryopsis (Wc; Wc11, Wc18, Wc25), respectively, at 11 days after flowering (DAF), 18 DAF, and 25 DAF revealed a total of 36,079 expressed genes, including 33,157 known genes and 2922 new genes. The differentially expressed genes (DEGs) showed 15,573 genes commonly expressed, with 1804 and 1412 genes uniquely expressed in Bc and Wc, respectively. Pairwise comparisons showed 821 uniquely expressed genes out of 15,272 DEGs for Wc11 vs. Bc11, 201 uniquely expressed genes out of 16,240 DEGs for Wc18 vs. Bc18, and 2263 uniquely expressed genes out of 16,240 DEGs for Wc25 vs. Bc25. Along with anthocyanin biosynthesis genes (OsPAL, OsCHS, OsCHI, OsF3H, OsDFR, OsANS, and OsUFGT/Os3GT), OsMATE34 expression was significantly upregulated in all Bc but not in Wc. OsMATE34 expression was similar to OsGSTU34, a transporter of anthocyanin in rice leaves. Taken together, our results highlighted OsMATE34 (Os08g0562800) as a candidate anthocyanin transporter in rice caryopsis. This study provides a new finding and a clue to enhance the accumulation of anthocyanin in rice caryopsis. [ABSTRACT FROM AUTHOR]

Anthocyanins belong to the group of flavonoid compounds broadly distributed in plant species responsible for attractive colors. In black rice (Oryza sativa L.), they are present in the stems, leaves, stigmas, and caryopsis. However, there is still no scientific evidence supporting the existence of compartmentalization and trafficking of anthocyanin inside the cells. In the current study, we took advantage of autofluorescence with anthocyanin's unique excitation/emission properties to elucidate the subcellular localization of anthocyanin and report on the in planta characterization of anthocyanin prevacuolar vesicles (APV) and anthocyanic vacuolar inclusion (AVI) structure. Protoplasts were isolated from the stigma of black and brown rice and imaging using a confocal microscope. Our result showed the fluorescence displaying magenta color in purple stigma and no fluorescence in white stigma when excitation was provided by a helium–neon 552 nm and emission long pass 610–670 nm laser. The fluorescence was distributed throughout the cell, mainly in the central vacuole. Fluorescent images revealed two pools of anthocyanin inside the cells. The diffuse pools were largely found inside the vacuole lumen, while the body structures could be observed mostly inside the cytoplasm (APV) and slightly inside the vacuole (AVI) with different shapes, sizes, and color intensity. Based on their sizes, AVI could be grouped into small (Ф < 0.5 um), middle (Ф between 0.5 and 1 um), and large size (Ф > 1 um). Together, these results provided evidence about the sequestration and trafficking of anthocyanin from the cytoplasm to the central vacuole and the existence of different transport mechanisms of anthocyanin. Our results suggest that stigma cells are an excellent system for in vivo studying of anthocyanin in rice and provide a good foundation for understanding anthocyanin metabolism in plants, sequestration, and trafficking in black rice. [ABSTRACT FROM AUTHOR]

Anthocyanins are antioxidants used as natural colorants and are beneficial to human health. Anthocyanins contribute to reactive oxygen species detoxification and sustain plant growth and development under different environmental stresses. They are phenolic compounds that are broadly distributed in nature and are responsible for a wide range of attractive coloration in many plant organs. Anthocyanins are found in various parts of plants such as flowers, leaves, stems, shoots, and grains. Considering their nutritional and health attributes, anthocyanin-enriched rice or pigmented rice cultivars are a possible alternative to reduce malnutrition around the globe. Anthocyanin biosynthesis and storage in rice are complex processes in which several structural and regulatory genes are involved. In recent years, significant progress has been achieved in the molecular and genetic mechanism of anthocyanins, and their synthesis is of great interest to researchers and the scientific community. However, limited studies have reported anthocyanin synthesis, transportation, and environmental conditions that can hinder anthocyanin production in rice. Rice is a staple food around the globe, and further research on anthocyanin in rice warrants more attention. In this review, metabolic and pre-biotic activities, the underlying transportation, and storage mechanisms of anthocyanins in rice are discussed in detail. This review provides potential information for the food industry and clues for rice breeding and genetic engineering of rice. [ABSTRACT FROM AUTHOR]

With the steadily growing of global transportation market, the traffic load has increased dramatically over the past decades, which may develop into a risk source for existing bridges. The simultaneous presence of heavy trucks that are random in nature governs the serviceability limit for large bridges. This study investigated probabilistic traffic load effects on large bridges under actual heavy traffic load. Initially, critical stochastic traffic loading scenarios were simulated based on millions of traffic monitoring data in a highway bridge in China. A methodology of extrapolating maximum traffic load effects was presented based on the level-crossing theory. The effectiveness of the proposed method was demonstrated by probabilistic deflection investigation of a suspension bridge. Influence of traffic density variation and overloading control on the maximum deflection was investigated as recommendations for designers and managers. The numerical results show that the congested traffic mostly governs the critical traffic load effects on large bridges. Traffic growth results in higher maximum deformations and probabilities of failure of the bridge in its lifetime. Since the critical loading scenario contains multi-types of overloaded trucks, an effective overloading control measure has a remarkable influence on the lifetime maximum deflection. The stochastic traffic model and corresponding computational framework is expected to be developed to more types of bridges. [ABSTRACT FROM AUTHOR]

Shear strength is a widely investigated parameter for reinforced concrete structures. The corrosion of reinforcement results in shear strength reduction. Corrosion has become one of the main deterioration factors in reinforced concrete beam. This paper proposes a shear strength model for beams with inclined bars based on a limit equilibrium method. The proposed model can be applied to both corroded and uncorroded reinforced concrete beams. Besides the tensile strength of longitudinal steel bars, the shear capacity provided by the concrete on the top of the diagonal crack, the tensile force of the shear steel at the diagonal crack, the degradation of the cross-sectional area and strength of the reinforcements induced by corrosion are all considered. An experimental work on two groups accelerated corroded beams was performed. Good agreements were found between the proposed theoretical predictions and experimental observations. [ABSTRACT FROM AUTHOR]

Pitting corrosion is one of the most common forms of localized corrosion. Corrosion pit results in a stress concentration and fatigue cracks usually initiate and propagate from these corrosion pits. Aging structures may fracture when the fatigue crack reaches a critical size. This paper experimentally simulates the effects of pitting morphologies on the static and fatigue behavior of steel bars. Four artificial notch shapes are considered: radial ellipse, axial ellipse, triangle and length-variable triangle. Each shape notch includes six sizes to simulate a variety of pitting corrosion morphologies. The stress-strain curves of steel bars with different notch shape and depth are obtained based on static tensile testing, and the stress concentration coefficients for various conditions are determined. It was determined that the triangular notch has the highest stress concentration coefficient, followed by length-variable triangle, radial ellipse and axial ellipse shaped notches. Subsequently, the effects of notch depth and notch aspect ratios on the fatigue life under three stress levels are investigated by fatigue testing, and the equations for stress range-fatigue life-notch depth are obtained. Several conclusions are drawn based on the proposed study. The established relationships provide an experimental reference for evaluating the fatigue life of concrete bridges., Competing Interests: The authors declare no conflict of interest.