Search

To provide a theoretical basis for the sustainable application of autumn mulching technology, we examined the effects of straw input on spring maize yield and water-use efficiency in film-mulched farmland. Based on the positioning tests of different mulching methods conducted in 2013, non-mulching (NM), spring mulching (SM), autumn mulching (AM), and autumn mulching combined with the return of straw (AMS) were selected in western Liaoning from 2018 to 2021. Spring maize yield, yield component factors, soil water content, and water-use efficiency under the four treatments were assessed. In each year, the AMS treatment significantly increased the maize yield, which was 48.22%, 9.33%, 30.66%, and 9.92%, and 11.78%, 7.71%, 12.86%, and 4.77% higher than that obtained after the SM and AM treatments, respectively. However, the harvest index was not significantly improved by AMS. AMS treatment significantly improved the precipitation utilization rate in all assessed years. Moreover, the crop water consumption was significantly increased by AMS treatment. Compared with the NM treatment, water-use efficiencies for economic and biological yield were also significantly improved. Thus, autumn mulching combined with straw-returning technology is an effective technical measure for improve spring maize yield and water-use efficiency in semi-arid areas of western Liaoning. [ABSTRACT FROM AUTHOR]

Soil mulching is a useful agronomic practice that promotes early fruit maturation and affects fruit quality. However, the regulatory mechanism of fruit metabolites under soil-mulching treatments remains unknown. In this study, variations in the gene sets and metabolites of grape berries after mulching (rice straw + felt + plastic film) using transcriptome and metagenomic sequencing were investigated. The results of the cluster analysis and orthogonal projection to latent structures discriminant analysis of the metabolites showed a difference between the mulching and control groups, as did the principal component analysis results for the transcriptome. In total, 36 differentially expressed metabolites were identified, of which 10 (resveratrol, ampelopsin F, piceid, 3,4′-dihydroxy-5-methoxystilbene, ε-viniferin, trans resveratrol, epsilon-viniferin, 3′-hydroxypterostilbene, 1-methyl-resveratrol, and pterostil-bene) were stilbenes. Their content increased after mulching, indicating that stilbene synthase activity increased after mulching. The weighted gene co-expression network analysis revealed that the turquoise and blue modules were positively and negatively related to stilbene compounds. The network analysis identified two seed genes (VIT_09s0054g00610, VIT_13s0156g00260) and two transcription factors (VIT_13s0156g00260, VIT_02s0025g04590). Overall, soil mulching promoted the accumulation of stilbene compounds in grapes, and the results provided key genetic information for further studies. [ABSTRACT FROM AUTHOR]

Plastic mulch is a commonly employed technique in agriculture to enhance crop production. Given the persistence of plastic residues in soil, bioplastics offer a potential alternative. Unfortunately, little is known about the medium-term consequences of both plastic and bioplastic mulches on soil properties. This study aimed to assess the medium-term consequences of plastic and bioplastic mulches and their replacement on soil properties. To this aim, the impact of conventional plastic (polyethylene, CP) and biodegradable plastic (BP) mulches on soil's abiotic (pH, water content, total and organic carbon and total nitrogen contents) and biotic (microbial biomass, microbial respiration, enzymatic activities and microarthropod communities) properties after 2 years of exposure (T1) and after 3 (T2) and 6 (T3) months of mulch replacement was investigated. Moreover, uncovered soils were assessed as a control. The results highlighted that the samples were more significantly impacted by exposure time to mulches than by the different kinds of mulches. The replacement of both mulches (T2 and T3) decreased the content of C and increased the microbial biomass and activities; moreover, the mulch replacement changed the microarthropod community composition with a decrease of Collembola and an increase of Oribatida and Gamasida, especially in soils covered by biodegradable plastic mulches. Further investigations are needed to better understand the long-term impact of mulches on soil biota in order to prove the potential ecological implications of transitioning to sustainable alternatives. [ABSTRACT FROM AUTHOR]

Long-term intensive tillage has led to soil environment degradation, reduced fertility, and difficulty in increasing crop yield in the Mollisol region of northeast China. In order to improve the soil'shydrothermal environment and nutrient content, we conducted field experiments to investigate the effects of different tillage practices and the amount of straw mulching on soil hydrothermal environment and nutrient content in agricultural soils in seasonal permafrost areas. Four treatments were established: no-tillage without straw (NT0), no-tillage with half straw mulching (NT1), no-tillage with full straw mulching (NT2), and rotary tillage without straw (CK) as the control treatment. The results indicate that the no-tillage with straw mulching treatments increased the soil ammonium nitrogen (NH4+-N) and nitrate nitrogen (NO3−-N) content, accompanied by improvements in the soil's water content and regulation of soil temperature changes, as compared to the CK treatment. Specifically, the soil's NH4+-N and NO3−-N content in the NT2 treatment were significantly increased by 25.65% and 38.81%, respectively. Our study indicates that NT2 treatment is the most suitable tillage practice and straw-returning method in the Mollisol region of northeast China. This study can provide a theoretical basis and reference for the efficient utilization of farmland soil in seasonal permafrost areas. [ABSTRACT FROM AUTHOR]

Two different in-row soil management techniques were compared in the Olive Orchard Innovation Long-term experiment of the Council for Agricultural Research and Economics, Research Centre for Olive, Fruit, and Citrus Crops in Rome, Italy. Rows were managed with an in-row rotary tiller and with synthetic mulching using permeable polypropylene placed after cultivar Maurino olive trees planting. The effects of the two treatments were assessed through weed soil coverage and the growth of the olive trees. Results showed better agronomic performance associated with synthetic mulching. The weed control effect along the row of a young high-density olive orchard was higher with the synthetic mulching compared to hoeing. The effect of the synthetic mulching seemed to disappear when removed from the ground (spring 2023) since no significant differences were found for tree size and yield in the two tested in-row soil management systems at the end of 2023. Finally, the growth of the young olive trees (Trunk Cross Sectional Area, Height, and Canopy expansion) measured across the three years, was higher for the synthetic mulched row than the hoed one. The use of synthetic mulching along the row positively forced the vegetative growth of the young olive trees and anticipated the onset of fruit production compared to periodical hoeing: a significantly higher fruit production was registered three years after planting. Root diameter was higher under synthetic mulching one year after planting, and no differences were observed in the following sampling dates showing similar fluctuations linked to the seasonal growth pattern. The life cycle assessment and costing highlighted that the application of mulching had a higher eco- and economic-efficiency than the periodical in-row soil hoeing. [ABSTRACT FROM AUTHOR]

Agricultural mulching is an important input for modern agricultural production and plays an important role in guaranteeing food security worldwide. At present, polyethylene (PE) mulching is still commonly used in agricultural production in most countries around the world, which is non-biodegradable, and years of mulching have caused serious agricultural white pollution. Lignin is one of the three major components of plant cell walls, and it is also the main renewable natural aromatic compounds in nature. Lignin-based composite film materials are green, biodegradable, and show good prospects for development in the field of agricultural mulch. This paper introduces the types, structure, and application status of lignin, summarizes the preparation of lignin-based composite film materials and its latest research progress, focuses on the types, preparation methods, and application examples of lignin-based agricultural mulching, and looks forward to the future development prospects of lignin-based agricultural mulching. [ABSTRACT FROM AUTHOR]

Mulching plays a pivotal role in modern sustainable agriculture, offering a versatile solution to enhance soil quality, improve soil health, conserve resources, and optimize crop performance. This study examined the effects of various mulching materials on soil properties, seasonal variations in soil and environmental variables, and yam production in a tropical environment, with a focus on sustainable agricultural practice. We applied a range of mulch treatments, including black polythene, weedmat, sugarcane straw, organic compost, cowpea-live, juncao grass, sawdust, and a control with no mulch. The results indicated that the organic compost mulch significantly increased soil pH and soil electrical conductivity (EC). The control treatment resulted in the highest soil moisture content, while the highest soil temperature were recorded for the black polythene and organic compost mulch treatments. The organic compost mulch enhanced the soil organic carbon (SOC) content, soil available phosphorus (SAP) content, and soil exchangeable calcium (SECa) content. The weedmat mulch showed the highest soil exchangeable potassium (SEK) content, and the control treatment exhibited the highest soil exchangeable magnesium (SEMg) and sodium (SENa) content. In terms of micronutrients, the sawdust mulch and black polythene mulch significantly increased soil exchangeable iron (SEFe) and copper (SECu) levels, respectively. Notable seasonal variations in soil pH, temperature, and environmental humidity were observed during the crop period. The soil pH fluctuated from slightly acidic levels in August 2023 to neutral levels in October, and then decreased to slightly acidic levels in early 2024 before stabilizing by March 2024. The soil temperature peaked in November and dropped in January, while the environmental humidity ranged from 48.25% in December to 76.33% in February. The study demonstrated that the organic compost mulch stood out as an advantageous choice because of its capacity to enhance the soil's properties and offer a balanced nutrient mix, making it particularly beneficial for yam cultivation. It also proved to be a reliable and balanced option to enhance soil quality with stable soil quality indices (SQIs). The weedmat mulch proved to be highly effective in enhancing yam growth and productivity. The weedmat mulch is the most profitable and cost-effective option for yam cultivation, providing the highest net returns and strong financial viability. This study emphasizes the value of choosing the right mulching materials to support soil quality, crop productivity, and economic returns in tropical settings, making strides toward more sustainable farming practices. [ABSTRACT FROM AUTHOR]

Conservation tillage is believed to promote soil aggregate stability, carbon (C) and nitrogen (N) sequestration, but the underlying mechanisms remain unclear. In this study, soil samples from an 18-year experiment including conventional tillage with straw removal (CT), deep scarification with straw mulching (DS), and no-tillage with straw mulching (NT) were used to obtain different fractions based on a comprehensive wet-sieving method of aggregate and particle size. The results showed that NT and DS increased soil organic carbon (SOC) and N by 9.3–16.4% and 10.8–25.8%, respectively, in addition to increasing the weight proportion of macroaggregates and the contribution of macroaggregate-associated C and N to total SOC and N. The C change in the total POM accounted for 77.4% and 79.9% of the total SOC increase by NT and DS, while the MAOM only accounted for 29.2% and 25.2%, respectively. Meanwhile, microaggregates-within-macroaggregates accounted for 96.9% and 90.5% of the SOC increase by NT and DS, respectively. The total SOC and N were positively correlated with the C and N of the macroaggregates and subfractions. In conclusion, the formation of macroaggregates drives soil C and N sequestration under conservation tillage, and POM and mM were important functional pools in this process. [ABSTRACT FROM AUTHOR]

An open field experiment from November 2022 to May 2023 in Croatia, which is characterized by a continental humid climate, evaluated nonwoven mulches made from viscose, jute, and hemp fibres blended with PLA fibres. The blends of viscose and jute fibres (90:10, 80:20, and 70:30 ratios) were produced using mechanical web formation on cards with needle punching for bonding webs. Additionally, hemp fibres were blended with PLA fibres in a ratio of 80:20. Winter conditions caused significant structural changes in the mulches, including shrinkage, increased mass per unit area, thickness, and reduced air permeability. The amount of PLA fibre in the nonwoven mulch blends significantly affected nonwoven fabric structure change during exposure to winter conditions. After 180 days, the breaking force of all mulches increased by 30% to 277%. The soil beneath jute and hemp mulches maintained higher temperatures and moisture levels compared to viscose mulches. Soil organic carbon content varied with fibre type and was higher under jute and hemp mulches. K2O content was significantly higher in soils covered by mulches. All mulches effectively suppressed weeds. The experiment results showed that the newly produced nonwoven mulches could replace the conventional agro foil. Results also suggest that choosing biodegradable nonwoven mulches produced from fibres obtained from natural and renewable sources can influence soil fertility and the availability of nutrients, ultimately affecting plant growth and agricultural productivity. [ABSTRACT FROM AUTHOR]

Bio-based polymers are a promising material with which to tackle the use of disposable and non-degradable plastics in agriculture, such as mulching films. However, their poor mechanical properties and the high cost of biomaterials have hindered their widespread application. Hence, in this study, we improved polysaccharide-based films and enriched them with plant nutrients to make them suitable for mulching and fertilizing. Films were produced combining sodium carboxymethyl cellulose (CMC), chitosan (CS), and sodium alginate (SA) at different weight ratios with glycerol and CaCl2 as a plasticizer and crosslinker, respectively, and enriched with ammonium phosphate monobasic (NH4H2PO4). A polysaccharide weight ratio of 1:1 generated a film with a more crosslinked structure and a lower expanded network than that featuring the 17:3 ratio, whereas CaCl2 increased the films' water resistance, thermal stability, and strength characteristics, slowing the release rates of NH4+ and PO43−. Thus, composition and crosslinking proved crucial to obtaining promising films for soil mulching. [ABSTRACT FROM AUTHOR]

Recruitment failures of Serianthes nelsonii are among the threats to this species' recovery, yet adaptive management research to understand the causes of seedling mortality is lacking. Insufficient available light in the in situ forest floor is one factor that may be involved, and below-plant reflection of incident light may improve seedling survival. Mirrors were placed beneath S. nelsonii, Serianthes grandiflora, and Serianthes kanehirae seedlings in container nursery conditions and S. grandiflora seedlings in a closed-canopy forest to determine the influence of the additional reflected light on seedling survival and growth. Below-plant mirrors increased nursery seedling survival for S. nelsonii and S. kanehirae, with 75% combined survival without mirrors and 88% combined survival with mirrors. Below-plant mirrors increased stem height by 51% for the three species, with greater stem diameter and ending leaf number also occurring for plants with mirrors. Below-plant mirrors increased S. grandiflora seedling survival to 161% and longevity to 236% compared to plants without mirrors under forest cover. The plants receiving mirrors also increased by 175% in height, 60% in stem diameter, and 117% in leaf number compared to the plants without mirrors. These findings indicate that passive solar engineering by exploiting below-plant light reflection may be used as a Serianthes conservation protocol to improve seedling survival and growth under shaded conditions. [ABSTRACT FROM AUTHOR]

Trees in degraded forest areas are generally exposed to water stress due to harsh environmental conditions, threatening their survival. This study simulated the environmental conditions of a degraded forest area by constructing an artificial rainfall slope and observing the physiological responses of Pinus densiflora to control, mulching, and waterbag treatments. P. densiflora exhibited distinct isohydric plant characteristics of reducing net photosynthetic rate and stomatal transpiration rate through regulating stomatal conductance in response to decreased soil moisture, particularly in the control and waterbag treatments. Additionally, the trees increased photochemical quenching, such as Y(NPQ), to dissipate excess energy as heat and minimize damage to the photosynthetic apparatus. However, these adaptive mechanisms have temporal limitations, necessitating appropriate measures. Under extreme drought stress (DS45), mulching treatment showed 4.5 times and 2.2 times higher in PIabs and SFIabs than in the control, and after the recovery period (R30), waterbag and mulching treatment showed similar levels, while PIabs and SFIabs in the control were only 45% and 75% of those in the mulching and waterbag treatments, respectively. Specifically, mulching extended the physiological mechanisms supporting survival by more than a week, making it the most effective method for enhancing the planting ground in degraded forest areas. Although the waterbag treatment was less effective than mulching treatment, it still significantly contributed to forming better growth conditions compared to the control. These findings highlight the potential for mulching and waterbag treatments to enhance forest restoration efforts, suggesting future research and application could lead to more resilient reforested areas capable of withstanding climate change-induced drought conditions. [ABSTRACT FROM AUTHOR]

The combination of no-till farming and green manure is key to nourishing the soil and increasing crop yields. However, it remains unclear how to enhance the efficiency of green manure under no-till conditions. We conducted a two-factor field trial of silage maize rotated with hairy vetch to test the effects of tillage methods and returning. Factor 1 is the type of tillage, which is divided into conventional ploughing and no-tillage; factor 2 is the different ways of returning hairy vetch as green manure, which were also compared: no return (NM), stubble return (H), mulching (HM), turnover (HR, for CT only), and live coverage (LM, for NT only). Our findings indicate that different methods of returning hairy vetch to the field will improve maize yield and quality. The best results were obtained in CT and NT in HM and LM, respectively. Specifically, HM resulted in the highest dry matter quality and yield, with improvements of 35.4% and 31.9% over NM under CT, respectively. It also demonstrated the best economic and net energy performance. However, other treatments had no significant effect on the beneficial utilization and return of nutrients. The LM improved yields under NT by boosting soil enzyme activity, promoting nitrogen transformation and accumulation, and increasing nitrogen use efficiency for better kernel development. Overall, NTLM is best at utilizing and distributing soil nutrients and increasing silage maize yield. This finding supports the eco-efficient cultivation approach in silage maize production in the region. [ABSTRACT FROM AUTHOR]

A rotary tiller is a common tillage tool for straw incorporation in an intensive tillage system. However, rotary tillage for seedbed preparation in dense-straw mulching conditions experiences high torque and poor performance of straw incorporation. Nowadays, a great deal of studies have been focused on mimicking the morphological features of low-resistance animals to improve the performance of soil-engaging tools. Accordingly, the present study investigated the performance of three C-type rotary blades (i.e., conventional, serrated, and biomimetic) under three straw lengths (50, 100, and 150 mm) for incorporation of straw into the field using an in situ field tillage testing bench. Compared to the conventional and serrated blades, the biomimetic blade had lower straw displacement (decreased by an average of 50 mm and 7 mm, respectively), higher straw burying rate (increased by an average of 5.2% and 7.8%, respectively), better straw distribution (decreased by an average of 9.1% and 10.4% on the coefficient of variation, respectively), as well as lower torque and power (decreased by an average of 3.3 N·m and 4.4 N·m, respectively) under all straw lengths. The improved performance of the biomimetic blade could be attributed to the fact that its typical teeth configuration was designed by mimicking the smooth arc of the mole-rat's claw. These results demonstrated that the biomimetic-designed blade could be a better option for incorporating dense straw into the field conditions. [ABSTRACT FROM AUTHOR]

Despite its significant thermal requirements, melon is a vegetable species that holds the potential for expanding the crop range in temperate climate regions. The selection of appropriate varieties and agronomic practices facilitates its cultivation in these regions. This experiment, employing a randomized block design, was conducted from 2019 to 2021, and this study evaluated the response of three melon varieties—'Seledyn F1', 'Melba', and 'Malaga F1' (factor I)—to various mulching materials (factor II): black polyethylene film (PE), black polypropylene nonwoven (PP), biodegradable film (Fbio), and giant miscanthus straw. Control plots were left unmulched. Melon seeds were sown on 15 April, and seedlings were transplanted on 31 May at a spacing of 100 × 80 cm. This study assessed yield, fruit number, individual fruit weight, and vertical and horizontal fruit diameters. Under optimal conditions, the varieties Seledyn F1 and Malaga F1 produced fruits with the highest individual mass. The application of synthetic mulches led to a two-fold increase in fruit yield compared to unmulched plots, with a 23.7% increase in fruit number. On average, the largest fruits were obtained with PE mulch. Melons grown on Fbio mulch yielded, on average, 40% less and produced 18.8% fewer fruits compared to those grown with PE mulch. [ABSTRACT FROM AUTHOR]

Plastic mulch plays a crucial role in agricultural production in arid and semi-arid regions, positively impacting crop yields, salt suppression, and seedling protection. However, as the usage of plastic mulch extends over time, residue accumulation becomes a significant issue in these regions. To clarify the effects of plastic mulch residue on soil fungi, this study focused on three typical cotton-growing areas in Xinjiang. Using high-throughput sequencing technology, the study analyzed the changes in the fungal community structure and diversity in rhizosphere and non-rhizosphere soils across 27 cotton fields under three different levels of plastic mulch residue: 0–75 kg/ha, 75–150 kg/ha, and 150–225 kg/ha. The results indicated that Ascomycota and Basidiomycota were the dominant fungal phyla across all treatments. Increasing levels of plastic mulch residue reduced the fungal richness in the soil, with a greater effects observed on rhizosphere fungi compared to bulk soil fungi. The α-diversity of cotton rhizosphere fungi showed an increasing trend, followed by a decrease with increasing plastic mulch residue, in Aksu and Bazhou, peaking at 75–150 kg/ha. Conversely, in Changji, the α-diversity decreased with increasing plastic mulch residue. The α-diversity of non-rhizosphere fungi associated with cotton decreased with increasing plastic mulch residue. Plastic mulch residue significantly altered the soil fungal α-diversity and had a greater effects on rhizosphere fungi. Different levels of plastic mulch residue had varying effects on the β-diversity of rhizosphere and non-rhizosphere fungi, significantly influencing rhizosphere fungi in Aksu and Bazhou and non-rhizosphere fungi in Changji and Bazhou. Overall, different levels of plastic mulch residue exerted varying degrees of influence on the community composition and diversity of soil fungi associated with cotton, potentially reducing the fungal richness and altering the community structure with increasing residue levels. [ABSTRACT FROM AUTHOR]

To explore the effects of different irrigation approaches, mulching, and their interaction on greenhouse melon (Cucumis melo L.) production and water use, a field experiment was conducted in Northern China using four treatments: mulching drip irrigation (MDI), mulching furrow irrigation (MFI), drip irrigation (DI), and furrow irrigation (FI; CK). The plant biomass, yield, water consumption, and water use efficiency (WUE) of melons were measured at different growth stages. The results showed that mulching has significant positive impacts on the growth as well as the fruit yield of melons. However, the water use characteristics of the plant were more greatly determined by the various irrigation approaches, and there was a significant interaction between the irrigation approach and mulching for both the total water consumption and WUE of the greenhouse melon. Of these treatments, MDI resulted in the highest yield of 38.49 t/hm2, which was significantly higher than the yields obtained with DI (32.36 t·hm−2) and FI (CK, 30.34 t·hm−2). In addition, the water consumption under MDI was 45.80% lower than FI (CK), which resulted in the promotion of WUE under MDI. The WUE range of the greenhouse melon is as follows: MDI (334.77 kg·mm−1·hm−2) > DI (244.84 kg·mm−1·hm−2) > MFI (189.78 kg·mm−1·hm−2) > FI (CK; 142.94 kg·mm−1·hm−2). The findings of this study indicate that mulching can boost melon yield, and drip irrigation can limit water consumption. This study provides a reference point for policymakers, indicating that drip irrigation with plastic mulching could be a feasible adaptation strategy for increasing greenhouse melon production in Northern China, as well as other agriculture regions that suffer from water shortages. [ABSTRACT FROM AUTHOR]

Mulching is a widely used agricultural water conservation measure in the semiarid regions of Northwest China. In order to explore the response process of different film mulching methods to soil microorganisms, we characterized the effect of different film mulching methods on soil microbial diversity and community structure characteristics in the root zone of drip-irrigated maize during the heading and maturity stages using high-throughput sequencing of 16SrDNA and ITS amplicons combined with bioinformatics analysis. Full mulching (FM) was contrasted to controls of no mulching (NM) and half-mulching (HM), yielding an order of microbial diversity, abundance, and evenness scores of HM > FM > NM. The HM and FM treatments reduced the relative abundance of Proteobacteria and Actinobacteria (the most abundant bacteria) in the bacterial community structure but increased that of Acidobacteria and Chloroflexi. In the fungal community structure, HM decreased the abundance of Sordariomycetes but increased that of Eurotiomycetes (the most abundant fungi). The abundance and community structure of bacteria were significantly correlated with soil temperature and those of fungi with pH. HM improved network complexity and competitive relationships among bacteria, while FM increased the relationship between fungal groups and the symbiosis of fungal communities. HM significantly increased maize yield (20.37% and 6.01% above NM and FM, respectively). In summary, full mulching was more favorable than no mulching for soil microbial diversity and community structure composition, but soil microbial diversity and yield responded better to half-mulching. These results provide a background for improving the yield of drip-irrigated maize and protecting the microbial ecosystems of farmland soils. [ABSTRACT FROM AUTHOR]

This paper presents the design of an integrated potato-planting machine capable of full-film covering, creating micro-ditches on ridges, and covering seed rows with soil. The machine addresses the challenges of traditional methods, allowing for mechanized planting with complete film coverage and individual seed row soil covering. The key components of the prototype were analyzed and designed. This includes the seeding system, the pointed wing-shaped trencher for creating micro-ditches, and the straddling film-mulching device. Additionally, the operating mechanism of these core components was analyzed. Field trials demonstrated an 85% success rate for seed depth placement under the film. The machine also achieved a 90% qualified index for seed potato spacing, with a 6% repetitive seeding rate and a 3% missed seeding rate. Furthermore, the qualified rate for covered soil width on seed rows was 94%, and the qualified rate for covered soil thickness was 93%. The adjacent row spacing achieved an 88% success rate. The degree of mechanical damage to the exposed surface of the mulch film was minimal, at only 30.2 mm2/m2. These results meet all the national and industry standards. The successful field trials confirm the effectiveness of the machine in performing integrated fertilization, sowing, ridging, full-film covering, and seed row soil covering. Compared to traditional methods, this machine significantly reduces labor intensity for farmers and enhances the economic value of potato planting. [ABSTRACT FROM AUTHOR]

Soil conservation is one of the best methods to improve soil fertility and enhance crop growth efficiency. Replacing plastic mulch with biomass is an environmentally friendly strategy. Innovative encapsulated soil granules (ESGs) were developed using PVA/PC film as the wall material and rural soil as the core. The PVA/PC was synthesized using 60% protein polypeptide (PC) from leather waste scrap and 35% poly (vinyl alcohol) (PVA), which was optimized for water absorption expansion and water retention performance. The ESG-10 granulated with 10% PVA/PC exhibited good water absorption, moisture retention, and resistance to water solubility. As an auxiliary material for soil improvement, the amount of ESGs mixed with the topsoil at ratios of 0 g/m2, 200 g/m2, and 400 g/m2 was proportional to the soil insulation and moisture retention. In rapeseed cultivation, the experimental results indicated that the soil mulched with ESG-10 can maintain seedling vitality for a long time under low water content conditions. [ABSTRACT FROM AUTHOR]

Mulch is an important measure for improving agricultural productivity in many semiarid regions of the world. However, the impacts of various mulching materials on soil hydrothermal characteristics, enzyme activity, and potato yield in fields have not been comprehensively explored. Thus, a two-growing-season field experiment (2020–2021) with four treatments (SSM, straw strip mulching; PMP, plastic film mulching with large ridge; PMF, double ridge-furrow with full film mulching; and CK, no mulching with conventional planting as the control) was conducted to analyze soil hydrothermal and soil enzyme activities and potato yield on the semiarid Loess Plateau of Northwest China. The results indicated that mulching practices had a positive effect on the soil moisture, with SSM, PMP, and PMF increasing by 7.3%, 9.2%, and 9.2%, respectively, compared to CK. Plastic film mulching significantly increased the soil temperature by 1.3 °C, and straw mulching reduced the soil temperature by 0.7 °C in the 0–30 cm soil layers of the whole growth period. On average, SSM, PMP, and PMF increased soil urease activity in 0–40 cm soil layers by 14.2%, 2.8%, and 2.7%, respectively, and enhanced soil sucrase activity by 19.2%, 8.6%, and 5.7%, respectively, compared with CK. Plastic film mulching increased soil catalase activity by 9.6%, while SSM decreased by 10.1%. Mulching treatments significantly increased tuber yield and water use efficiency based on dry tuber yield (WUE), and SSM, PMP, and PMF increased tuber yield by 18.6%, 31.9%, and 29.7%, enhanced WUE by 50%, 50%, and 57.0% over CK. The correlation analysis revealed that soil moisture was the main factor influencing tuber yield (r = 0.95**). Mulching could improve the soil hydrothermal environment, regulate soil enzyme activities, and promote yield increase. As a sustainable protective mulching measure, straw strip mulching is conducive to improving the ecological environment of farmland and the sustainable development of regional organic agriculture. [ABSTRACT FROM AUTHOR]

Biodegradable mulch films (BMFs) are becoming increasingly popular in agricultural practices. However, research on the ecological impact of biodegradable mulch films on pepper–soil systems is still scarce. To compare the differential effects of BMFs and polyethylene (PE) mulch on soil chemical properties, soil bacterial community composition, and pepper cultivation, a study was conducted encompassing eight distinct treatments. These treatments included three varieties of polybutylene adipate terephthalate (PBAT) combined with polylactic acid (PLA) mulches: PP-JL, PP-SD, and PP-SH; a black polypropylene carbonate mulch (PPC-BK); a brown PPC mulch (PPC-BR); a polyethylene (PE) mulch; straw mulching (NCK); and an uncovered control (PCK). After applying mulches for 129 days, most PPC and PBAT + PLA films had reached the rupture phase, whereas the PE film was still in the induction phase. Pepper yield was obviously higher in all mulched treatments (4830 kg hm−1) than in the un-mulched control (3290 kg hm−1), especially the BMF PP-JL treatment, which showed the most notable improvements in yield. Although BMF treatments maintained a lower soil temperature than the PE film mulch, they were still higher than the un-mulched control. Furthermore, the soil bacterial community composition and ecological network were not markedly affected by different mulching conditions. However, the PP-SH treatment significantly increased the abundance of Pseudomonas, Nitrosomonas, and Streptomyces genera. Moreover, Lactobacillus and Gp16 were substantially more abundant in the PPC-black (BK) and PPC-brown (BR) treatments compared to the PE mulching treatment. This study could provide valuable insights into the ecological benefits of BMFs in pepper cultivation. However, as our experiments were conducted for only one season, it is imperative to undertake long-term experiments across consecutive seasons and years for a thorough understanding and comprehensive study. [ABSTRACT FROM AUTHOR]

Sand-cemented bodies (SCBs) are naturally distributed in some interdune corridors in the central Taklimakan Desert, northwest China. In this study, field-collected SCB particles were used as the experimental material, and wind tunnel experiments were conducted with different sand supplies, wind velocities, and SCB coverages to evaluate SCB wind erosion efficiency and vertical mass flux. The results showed that wind erosion efficiency decreased as SCB coverage increased. When the SCB coverage was above 40%, sand deposition processes occurred only under saturated sand flow, while sand transport remained unaffected by increases in SCB coverage under unsaturated sand flow. Under saturated flow, the highest concentrations of transported sand were found at 0–6 cm above the surface, and the main sand bed process was deposition. The sand bed process changed from aeolian erosion to deposition with increasing SCB coverage and tended to remain stable until the SCB coverage exceeded 40%. By contrast, under unsaturated sand flow, the sand bed process was primarily aeolian erosion, and the highest concentrations of transported sand were found at 0–4 cm above the surface. At high SCB coverage levels (more than 40%), a general balance between aeolian erosion and deposition processes was reached. In summary, increasing SCB coverage had a significant impact on surface wind erosion processes. Thus, SCBs can be used as a novel sand retention material. [ABSTRACT FROM AUTHOR]

Weed control in cutting propagation is limited to manual hand weeding, which is time-consuming and labor-intensive. Preemergence herbicides and mulches may be viable weed control methods for cutting propagation, but crop safety and weed control efficacy must be better understood. Four preemergence herbicides (indaziflam, isoxaben, isoxaben + dithiopyr, and oxyfluorfen + oxadiazon) and two mulches (pine pellets and rice hulls) were assessed in cutting propagation for their impact on rooting and subsequent liner growth (butterfly bush [Buddleja davidii Franch.] and crape myrtle [Lagerstroemia indica L.]) and control of four common weed species. Butterfly bush cuttings had lower rooting percentage and root dry weight with isoxaben and isoxaben + dithiopyr, but no damage was observed for all other treatments during propagation or after transplant. Crape myrtle cutting root development and liner growth were statistically similar for all treatments compared to the non-treated control. Isoxaben, isoxaben + dithiopyr, oxyfluorfen + oxadiazon, and pine pellets provided excellent control (87 to 100%) of all four weed species tested. Overall, several preemergence herbicides and mulches were safe for use in cutting propagation and effective weed control varied by product and weed species. [ABSTRACT FROM AUTHOR]

Low-density polyethylene (LDPE) mulching films have an important function in crop cultivation; at the end of their life, however, their removal and disposal become both an economic and environmental problem. One possible alternative to low-density polyethylene (LDPE) mulch is provided by certified soil-biodegradable mulch films, such as those produced by Novamont and commercially available under the trade name MaterBi®. MaterBi is a biodegradable thermoplastic material made with starch and a biodegradable copolyester based on proprietary technology. In this study, we compared two biodegradable MaterBi®-based films (commercial and experimental films) with bare soil and a low-density polyethylene to evaluate their effect on yield and on a number of qualitative characteristics (organoleptic and nutraceutical composition) of eggplant fruits (cv Mirabelle F1) grown in two different regions in Southern Italy (Sicily and Campania). In our study, the use of biodegradable MaterBi® films improved not only yield and production parameters, such as the number and average weight of fruits, but also lipophilic and hydrophilic antioxidant activity and phenolic and ascorbic acid content. For many parameters, responses differed according to the cultivation environment and, in particular, the site's pedoclimatic conditions. Our results suggest that biodegradable MaterBi®-based mulching films are a potentially valid alternative to traditional LDPEs, providing the production and quality benefits reported above and promoting environmental sustainability, thanks to their positive biodegradable properties. [ABSTRACT FROM AUTHOR]

While crushed pinecone mulch holds promise as a beneficial material for blueberry cultivation, research on its effectiveness remains limited. Crop leaf characteristics can serve as parameters for assessing mulching effects, although there are several limitations, including the need to analyze various distinct characteristics separately. The combination of hyperspectral data and machine learning techniques is expected to enable the selection of only the most important features among these characteristics. In this study, we investigated the impact of various mulching treatments utilizing pine tree byproducts, including crushed pinecones. Mulching variations included non-mulching (NM), crushed pinecones (PCs), a mixture of crushed pinecones and sulfur (PCS), pine needles (PNs), and sulfur treatment (S). Conventional methods were employed to measure leaf growth (length and width) and physiological characteristics (chlorophyll content, chlorophyll fluorescence, and stomatal conductance). Hyperspectral reflectance was also measured, and classification models using Partial Least Squares Discriminant Analysis (PLS-DA) and eXtreme Gradient Boosting (XGBoost) were developed for crop characteristics, vegetation indices (VIs), visible and near-infrared (VNIR), and short-wave infrared (SWIR). The results showed that using crushed pinecones as the sole mulching material for blueberries, without sulfur treatment, had a positive impact on blueberry growth. The PC treatment exhibited a dual effect on plant growth by lowering the soil pH to 5.89 and maintaining soil moisture within the range of 26.33–35.20%. We observed distinct differences in soil inorganic nutrient content, with higher concentrations of organic matter, total nitrogen, and available P2O5 and K+, which positively influenced blueberry growth. Mulching treatments demonstrated superior physiological characteristics, with two classification models identifying stomatal conductance (gs) as a key parameter influencing treatment classification (VIP scores > 1 rank: 3, variable score rank: 1). The photochemical reflectance index (PRI) emerged as a major parameter among VIs, showing potential for measuring water stress (VIP scores > 1 rank: 2, variable score rank: 1). In the SWIR PLS-DA model, wavelength peaks were mainly observed in the O-H overtone (1410 nm, 1450 nm, 1930 nm, 1940 nm, and 2100 nm). Overall, crushed pinecones were found to positively impact the initial growth of blueberries by enhancing water status (plant respiration). [ABSTRACT FROM AUTHOR]

Straw mulching is a key method for controlling soil and water losses. Mulching costs may be reduced by applying it in strips rather than over entire areas. However, the effect of different straw mulching methods on the effectiveness of reducing soil erosion is unclear. In this study, the effects of straw mulching strip length (covering 1/4, 1/2, 3/4, and 4/4 of the slope length) and coverage rate (0.2, 0.5, and 0.8 kg m−2) on interception, infiltration, runoff, and soil erosion were investigated at the plot scale using rainfall simulation experiments. The further complex correlations between these variables were analyzed using structural equation modeling (SEM). Bare slopes were used as a control group. The rainfall intensity was chosen to be 60 mm h−1. The results showed that (1) the modified Merriam interception model can describe the change in interception with time under straw mulching conditions well (R2 > 0.91, NSE > 0.75). (2) A total of 35.39–78.79% of the rainwater is converted into infiltration on straw-covered slopes, while this proportion is 36.75% on bare slopes. The proportion of rainwater converted to infiltration was greatest (78.79%) when the straw covered 3/4 of the slope length at a coverage rate of 0.5 kg m−2, which was the most conducive to rainwater harvesting on the slope. (3) Straw mulching protects the topsoil from the impact of raindrops and directly affects the sediment yield (direct effect = −0.44). Straw mulching can also indirectly affect sediment yield by increasing interception, reducing runoff, and decreasing the sediment carrying capacity of runoff (indirect effect = −0.83). Compared with bare slopes, straw covering at least 1/2 of the slope length can significantly reduce runoff yield, but straw covering only 1/4 of the slope length can significantly reduce sediment yield. Moreover, once the straw mulch slope length reaches 3/4 and the coverage rate reaches 0.5 kg m−2, further increases in mulch slope length and coverage rate will not significantly reduce the runoff and sediment yields. These results assessed the effectiveness of different straw mulching methods in controlling soil and water losses on sloping farmland. [ABSTRACT FROM AUTHOR]

Rice–duckweed coculturing as an advanced technique has proven effective for weed control. However, the complex environmental interactions underlying its effectiveness remain unclear. In this study, a controlled pot experiment was conducted to isolate the shading effect of duckweeds (Landoltia punctata and Spirodela polyrhiza) from their intricate environmental interactions with paddy weeds (Cyperus difformis, Eclipta prostrata, and Ammannia auriculata). The results revealed that as the duckweeds grew, there were notable decreases in total weed density (52.41–77.01%) and biomass (42.33–99.23%) while rice biomass remained unaffected. Duckweed covering allowed less than 8.64% of light to pass through and led to decreases in environmental temperature, pH, and dissolved oxygen concentration in the floodwater, but had little impact on inorganic nitrogen levels. Through screening with random forest analysis and structural equation modelling, it was found that weed density and biomass were predominantly influenced by the reduced light transmittance (54.1% and 77.2%, p ≤ 0.001) resulting from duckweed covering while the decline in dissolved oxygen content partly influenced weed density (18%). In conclusion, this study's results bring a different perspective, confirming the sunlight-shading effect of duckweed as a critical mechanism significantly inhibiting the germination and growth of weeds. These findings provide a scientific basis for the improved application of ecological weed control methods in paddy fields. [ABSTRACT FROM AUTHOR]

Numerous research showed that mulching with conventional agro foils elevates soil temperature and promotes plant growth, but negatively influences soil health and brings environmental concerns. Most of the published research on nonwoven mulches for plant cultivation includes nonwoven fabrics produced by extrusion processes providing nonwoven fabric structures similar to films. A limited number of studies investigate the impact of nonwoven mulches produced by a mechanical process on the cards and bonded by needling on plant cultivation. For this study, nonwoven mulches of mass per unit area of 400 g m−2 made from jute, hemp, viscose (CV), and polylactide (PLA) fibers were produced on the card bonded by needle punching. The field experiment was conducted two consecutive years in a row, in spring 2022 and 2023, by planting lettuce seedlings. The nonwoven mulches maintain lower temperatures and higher soil moisture levels compared to agro foil and the control field. The fibrous structure and their water absorption properties allow natural ventilation, regulating temperatures and retaining moisture of soil, consequently improving soil quality, lettuce yield, and quality. The fiber type from which the mulches were produced, influenced soil temperature and humidity, soil quality, and lettuce cultivation. The nonwoven mulches were successful in weed control concerning the weediness of the control field. Based on the obtained results, the newly produced mulches are likely to yield better results when used for the cultivation of vegetables with longer growing periods. Newly produced biodegradable nonwoven mulches could be an eco-friendly alternative to traditional agro foil, minimizing environmental harm during decomposition. The obtained results suggest that the newly produced mulches would be even more suitable for growing vegetables with longer growing seasons. [ABSTRACT FROM AUTHOR]

Camellia oleifera Abel is rich in oil, which is beneficial to human health. Seasonal drought and uneven canopy microclimate distributions result in low yields and picking efficiencies. To reveal the features of fruit development in the canopy and evaluate the impact of pruning on the canopy microclimate and fruit parameters, a field experiment was carried out in Zhuzhou, Hunan. The C. oleifera tree canopy was divided into four positions: inside the upper canopy (UI); inside the lower canopy (LI); outside the upper canopy (UO); and outside the lower canopy (LO). A combination of high-light efficiency tree pruning and mulching with camellia shells and weedproof film (CPM) was tested and compared with mulching (M). Compared with temperature and humidity, canopy light intensity is a key climate factor that affects the development of Camellia oleifera fruits. CPM improved the canopy light distribution and increased the light intensity inside the canopy of C. oleifera. There was no significant difference in the fruit cracking rate among the four canopy positions in the CPM treatment, which indicated that the fruit maturation period tended to be consistent across the canopy positions. Treatment with CPM resulted in 24.14% and 4.11% greater yield and oil content ratios, respectively, than the treatment with M. The fresh weight of the fruits from LO was the lowest, and the fatty acid accumulation was the lowest due to the poor light availability. CMP increased fruit quality, particularly in LI, which was 41.92%, 36.36%, 13.21%, and 12.79% greater in terms of fresh weight, yield, fresh seed rate, and oil content, respectively, than M. Unfortunately, there was no discernible difference in fatty acid components between CPM and M. Our research suggested that pruning combined with the mulching of organic material is an effective way to alleviate seasonal drought and uneven fruit maturation in C. oleifera trees, further increasing yield and fruit quality. [ABSTRACT FROM AUTHOR]

Global food security faces a substantial risk stemming from water scarcity, particularly in regions heavily dependent on rainfall for agricultural purposes. In the Andean region, which is grappling with water scarcity, innovative and sustainable approaches are imperative for securing food sources. Plastic mulching has emerged as a potential solution to address water scarcity challenges by conserving soil moisture and optimizing growing conditions. A two-year field experiment was conducted that evaluated the efficacy of plastic mulching in preserving soil water content and reducing drought stress for maize. Two maize cultivars were grown with plastic mulching and conventional practices using a randomized completed block design with three replicates. The results demonstrated that employing plastic mulch led to a rise in the soil water content, particularly within the initial 30 cm of depth, resulting in variances of up to 4.71% humidity between the 20 and 30 cm depths. For the 2019 and 2020 evaluation years, plastic mulching elevated the volumetric water content in the first 30 cm of the soil by 8.39% and 14.18%, respectively. Additionally, it elevated the soil temperature by 1.26 °C and reduced the maize flowering time. Plastic mulching substantially enhanced the fresh corn yield, reaching a 162% increase compared to conventional plots. These findings underscore the potential benefits of plastic mulching in conserving the soil water content, alleviating drought and cold stress for crops in the Andean region. [ABSTRACT FROM AUTHOR]

The purpose of this study was to observe the changes in soil nitrogen pools (active organic and inorganic nitrogen fractions) after applying organic materials under drip irrigation with film mulching in a semi-arid soil. The two-year field experiment included four fertilization treatments: maize straw, fodder grass, sheep manure, and a control treatment with no organic material applied (CK). The results showed that the application of maize straw and sheep manure significantly increased the soil total nitrogen content by 9.02~13.33% and 11.02~17.27%, respectively, while no significant improvement was found with the use of fodder grass. Compared with CK, returning organic materials to the field increased the soil active nitrogen pools, except for ammonium nitrogen content. Meanwhile, the content of particulate organic nitrogen was significantly increased by 42.11~78.85% under the application of organic materials, which took the highest proportion of active nitrogen pools and was sensitive to fertilization treatments. Among the three organic materials, maize straw and sheep manure increased the soil active nitrogen content the most. In conclusion, both maize straw and sheep manure are the optimum organic materials, which could be applied for improving soil nitrogen storage under drip irrigation with film mulching within semi-arid areas. [ABSTRACT FROM AUTHOR]

Research was carried out to assess the yield and quality of fruits from the new Polish apple tree 'Chopin'—a 'green peel', scab-resistant cultivar under grass living mulch management. Blue fescue and red fescue were tested in experiment no. 1. In experiment no. 2, meadow grass and perennial ryegrass were used. Every species of grass was sown in two doses of 50 and 150 kg per ha. Herbicide fallow was introduced as a control in both experiments. Strongly variable temperatures and precipitations in the years of evaluation made it possible to estimate year—a function of variable environmental conditions—as an additional experimental factor. An unexpected effect of the presence of living mulch was its significant impact on the appearance of blush on the 'green peel' fruit. However, living mulches had little effect on weight and fruit size. Cool days during apple ripening enhanced the process of fruit skin red coloration. The effect of both agrotechnical and environmental factors on fruit quality was more visible in the case of less vigorous trees, which were more susceptible to experimental, stressful conditions. However, increasing the sowing dose of each grass seed did not influence red blushing, weight, or fruit size. An additional difficulty for the trees was the competition caused by the early germination of these living grass mulches, reinforced by the presence of Trifolium repens L. [ABSTRACT FROM AUTHOR]

Biodegradable mulching films are a very attractive solution to agronomical practices intended to achieve more successful crop results. And, in this context, the employment of agricultural and industrial food residues as starting material for their production is an alternative with economic and environmental advantages. This work reports the preparation of bilayer films having two different wettability characteristics from three bio-derived biopolymers: TEMPO-oxidized cellulose nanofibers isolated from infused Yerba Mate residues, Chitosan and Polylactic acid. The infused Yerba Mate residues, the isolated and oxidized cellulose nanofibers, and the films were characterized. Nanofibrillation yield, optical transmittance, cationic demand, carboxyl content, intrinsic viscosity, degree of polymerization, specific surface area and length were studied for the (ligno)cellulose nanofibers. Textural and chemical analysis, thermal and mechanical properties studies, as well as water and light interactions were included in the characterization of the films. The bilayer films are promising materials to be used as mulching films. [ABSTRACT FROM AUTHOR]

Mulching practices have been used to improve peach growth and production across the globe. However, the impact of mulching on the physiochemical properties and soil characteristics of orchards remains largely unknown. This study aimed to decipher the impacts of various mulching patterns on the soil environment and the quality of Prunus persica fruit in "Zijinhuangcui". Three treatments were set up, which included black ground fabric mulch (BF) and two living grass mulch treatments (HV: hairy vetch and RG: ryegrass). The results showed that different mulching treatments have different effects on soil, plant growth, and fruit quality. Living grass mulch treatments, especially the HV treatment, significantly improved soil nutrients by enhancing nitrogen-related indicators. Of note, the BF treatment had higher total phosphorus and available phosphorus contents than the HV and RG treatments. The HV treatment had the highest relative abundance of Proteobacteria (33.49%), which is associated with symbiotic nitrogen fixation, followed by RG (25.62%), and BF (22.38%) at the young fruit stage. Similarly, the abundance of Terrimonas, which has a unique nitrogen fixation system at the genus level, was significantly higher in the living grass mulch (HV, 1.30–3.13% and RG, 2.27–4.24%) than in the BF treatment. Living grass mulch also promoted tree growth, increased fruit sugar content, sugar-related components, and sugar-acid ratio, and reduced the acid content. Collectively, the findings of this study show that living grass mulch can promote tree growth and improve fruit quality by improving soil fertility, bacterial diversity, and richness. [ABSTRACT FROM AUTHOR]

The mulching of agricultural soils has been identified as a viable solution to sequester carbon into the soil, increase soil health, and fight desertification. This is why it is a promising solution for carbon farming in Mediterranean areas. Models are used to project the effects of agricultural practices on soil organic carbon in the future for various soil and climatic conditions, and to help policy makers and farmers assess the best way to implement carbon farming strategies. Here, we modified the widely used RothC model to include mulching practices and their direct and indirect effects on soil organic matter input, soil temperature changes, and soil hydraulic balance. We then calibrated and tested our modified RothC (RothC_MM) using the dataset collected in two field mulching experiments, and we used the tested RothC_MM to estimate the expected soil carbon sequestration due to mulching by the year 2050 for the Valencian Community (Spain). Our results show that RothC_MM improved the fit with the experimental data with respect to basic RothC; RothC_MM was able to model the effects of mulch on soil temperature and soil water content and to predict soil organic carbon (SOC) and CO2 observations taken in the field. [ABSTRACT FROM AUTHOR]

Antioxidants are added to foods to decrease the adverse effect of reactive species that create undesirable compounds that destroy essential nutrients and, therefore, lower the nutritional, chemical and physical properties of foods. This study was carried out to determine the antioxidant properties of flowers and plant stems with leaves of Echinacea purpurea grown with mulches of different colours and thicknesses. Coneflowers were grown in the Experimental Station of the Agricultural University in Kraków, Poland. The mulching materials used were black, green and brown colours of 100 g/m2 and 80 g/m2 density. In plant material, e.g., flowers or plant stems plus leaves the proximate analysis, the total polyphenol content and the ability to scavenge free radicals (ABTS, DPPH and FRAP) were determined. The results show that flower samples had a higher content of compound proteins, ash and phenolic compounds. The mulching colour and density did not affect the proximate analysis of the E. purpurea plant. Based on the result of this study, E. purpurea is a potential source of natural antioxidants and can be used to improve the antioxidant activity of various food products as well as in cosmetics within the pharmaceutical industry. [ABSTRACT FROM AUTHOR]

Urban forest soil is often disturbed by frequent human activity. Organic mulching is effective for improving soil quality; however, the effects of organic mulching on soil bacterial communities in urban forests are still largely unexplored. This study evaluated how organic mulching changed the urban forest soil bacterial community through an incubation experiment. Four treatments were applied: (1) no organic mulch (CK); (2) wood chips alone (5 g, Mw); (3) wood compost alone (5 g, Mc); and (4) wood chips + wood compost (This mulch was divided into two layers, i.e., the upper layer of wood chips (2.5 g) and the lower layer wood compost (2.5 g, Mw+c).) We found significant differences in the soil physicochemical properties under organic mulching after incubation. Overall, organic mulching can alter soil bacterial community structure. Soil alkali-hydrolyzable nitrogen, soil organic carbon, soil total nitrogen, and carbon-nitrogen ratio were the main factors affecting soil microbial community structures. Soil bacterial groups under organic mulching treatments mainly acted on the C and N cycling of functional pathways in soil. This study suggests that organic mulching could maintain the development of soil bacteria, which establishes a theoretical foundation for enhancing the microbiological environment of urban forest soils. [ABSTRACT FROM AUTHOR]

Enhancing crop production in the saline regions of the Yellow River Delta (YRD), where shallow saline groundwater is prevalent, hinges on optimizing water and salt conditions in the root zone. This study explored the effects of various physical methods on soil water and salt dynamics during the cotton growing season in these saline areas. Three approaches were tested: plastic film mulching (FM), plastic film mulching with an added compacted soil layer (FM+CL), and ridge-furrow planting (RF). The HYDRUS-2D model (Version 3.02) was used to analyze changes in soil water and salt content in the root zone over time. The results showed that subsoil compaction significantly lowered salt build-up in the root zone, especially in the top 20 cm. Film mulching was crucial for reducing water loss in the Yellow River Delta. Crop transpiration increased by 7.0% under FM and 10.5% under FM+CL compared to RF planting. Additionally, FM+CL reduced soil salinity in the top 10 cm by 11.5% at cotton harvest time compared to FM alone. The study concludes that combining film mulching with a soil compaction layer is a promising strategy for local farmers, addressing soil water retention, salt management, and boosting cotton yields. [ABSTRACT FROM AUTHOR]

In order to improve the quality of transplanting devices and solve the problems of the poor effect on soil moisture conservation and more weeds easily growing due to the high mulching-film damage rate with an excessive number of hole openings, we developed a dibble-type transplanting device consisting of a dibble-type transplanting unit, a transplanting disc, and a dibble axis. The ADAMS software Adams2020 (64bit) was used to simulate and analyze the kinematic track of the transplanting device. The results of the analysis show that, when the hole opening of the envelope in the longitudinal dimension was the smallest, the transplanting characteristic coefficient was 1.034, the transplanting angle was 95°, and the transplanting frequency had no influence. With the help of the ANSYS WORKBENCH software Ansys19.2 (64bit), an analysis of the process of the formation of an opening in the mulching film and a mechanical simulation of this process were completed. The results indicate that, when the maximum shear stress of the mulching film was the smallest, the transplanting characteristic coefficient was 1.000, the transplanting frequency was 36 plants·min−1, and the transplanting angle was 95°. In addition, the device was tested in a film-breaking experiment on a soil-tank test bench to verify the hole opening in the mulching film. The bench test showed that, when the longitudinal dimension was the smallest, the transplanting characteristic coefficient was 1.034, the transplanting frequency was 36 plants·min−1, and the transplanting angle was 95°. When the lateral dimension was the smallest, the transplanting characteristic coefficient was 1.034, the transplanting frequency was 36 plants·min−1, and the transplanting angle was 90°. The theoretical analysis, kinematic simulation, and soil-tank test results were consistent, verifying the validity and ensuring the feasibility of the transplanting device. This study provides a reference for the development of transplanting devices. [ABSTRACT FROM AUTHOR]

The aim of the present study is to investigate the effect of differently colored low-density polyethylene mulching films (black, silver/brown, and yellow/brown) in comparison with bare soil (BS) on soil temperatures, yield and yield components (number of fruit and average fruit weight), and fruit quality traits (color, firmness, total soluble solids content, polyphenols, flavonoids, ascorbic acid, carotenoids, and antioxidant activity) of a 'San Marzano' tomato crop grown in Southern Italy over two years (2014 and 2015). The warmer season (2015) shortened the cropping cycle (124 vs. 178 days, 2015 vs. 2014), thereby accelerating fruit ripening and improving firmness and redness (on average, the color parameter a/b was greater than in 2014). It determined the best yield response (53 vs. 44 Mg ha−1) by increasing the number of commercial fruits per unit land area despite the lower average fresh weight (AFW) than the first year. Regardless of the different plastic films, in both years, soil heat storage produced by mulching improved yield as compared to BS and showed a positive and significant effect on the contents of total soluble solids, polyphenols, flavonoids, and carotenoids without affecting the antioxidant activity. The highest values of quality traits were reached in the second year with silver and yellow mulches. Therefore, since the colored mulching films (yellow and silver) had a contradictory effect on yield and quality in the two years, further investigation is desirable. [ABSTRACT FROM AUTHOR]

The use of biostimulants and biofilms in agriculture is constantly increasing, as they may support plant growth and productivity by improving nutrient absorption, increasing stress resilience and providing sustainable alternatives to chemical management practices. In this work, two commercial products based on Trichoderma afroharzianum strain T22 (Trianum P®) and a seaweed extract from Ascophyllum nodosum (Phylgreen®) were tested on industrial tomato plants (Solanum lycopersicum var. Heinz 5108F1) in a field experiment. The effects of single and combined applications of microbial and plant biostimulants on plants grown on two different biodegradable mulch films were evaluated in terms of changes in the metabolic profiles of leaves and berries. Untargeted metabolomics analysis by LC-MS Q-TOF revealed the presence of several significantly accumulated compounds, depending on the biostimulant treatment, the mulch biofilm and the tissue examined. Among the differential compounds identified, some metabolites, belonging to alkaloids, flavonoids and their derivatives, were more abundant in tomato berries and leaves upon application of Trichoderma-based product. Interestingly, the biostimulants, when applied alone, similarly affected the plant metabolome compared to control or combined treatments, while significant differences were observed according to the mulch biofilm applied. [ABSTRACT FROM AUTHOR]

The impact of living mulches established with three officinal plants (Alchemilla vulgaris, Fragaria vesca and Mentha x piperita) on the soil bacterial microbiome and activity, the nematodes population, and the nutrient status of an organic apple orchard was assessed. The composition and diversity of the bacterial communities were differentially modified by living mulches. The activity of the bacterial microbiome associated with F. vesca was higher and utilized more C sources in comparison to other treatments. The combined analysis of the core bacterial microbiome and metabolic activity pointed to a potential effect of F. vesca on different levels of the soil's trophic network. The living mulches did not affect the overall number of nematodes, but in some cases, they modified the structure of the population: F. vesca induced the highest share of bacteria feeders and the lowest number of herbivores and fungal feeders. The living mulches modified the availability of some nutrients and the pH. Multivariate analysis of the whole dataset showed several potential inter-dependencies between the assessed parameters that are worthy of further study. In conclusion, the introduction of multifunctional living mulches based on officinal plants induced changes to the soil's genetic and functional biodiversity and chemical properties. These modifications could deliver ecosystem services particularly relevant to organic apple orchards. [ABSTRACT FROM AUTHOR]

In the realm of agriculture, biodegradable films are emerging as a promising substitute for traditional polyethylene (PE) films. Despite their potential, there has been a notable lack of extensive research on their effectiveness in the context of dry direct-seeded rice cultivation. Addressing this gap, a comprehensive biennial study was conducted in the northeastern regions of China, focusing on the 'Baonong 5' rice variety. This study meticulously compared three distinct cultivation methods: (1) employing biodegradable film mulching, (2) using conventional plastic film mulching, and (3) cultivating without any mulch. The findings revealed that biodegradable film mulching significantly enhanced soil moisture control, increased leaf area, and improved rice yield and water utilization efficiency (p < 0.05) compared to the plots without mulch. Notably, there was no marked difference in outcomes between the plastic film mulching and the unmulched plots. This research underscores the profound benefits of biodegradable film in rice cultivation, particularly from an environmental sustainability perspective. This innovative method not only boosts agricultural productivity but also addresses critical environmental challenges like climate change and water conservation. The application of biodegradable mulch has proven to be remarkably effective in improving irrigation efficiency and crop water conservation, leading to enhanced rice development and higher yields. The study recorded a substantial increase in water productivity—30% in 2021 and between 52.85% and 60% in 2022—compared to traditional cultivation practices. Furthermore, the use of biodegradable mulch resulted in significantly higher rice yields than the non-mulched plots, thus contributing to increased profitability. Such methods not only yield higher crop outputs but also mitigate environmental issues like water pollution and help alleviate prevalent water shortages in rice farming. [ABSTRACT FROM AUTHOR]

The performance and degradation of nonwoven mulches made from viscose, jute, hemp fibers, and their blends with PLA fibers, subjected to field conditions, are investigated. This research explores the possible substitution of traditional agricultural polyethylene mulching agro foil with environmentally friendly biodegradable nonwoven mulches produced from blends of jute, hemp, and viscose fibers along with PLA fibers. The nonwoven mulches underwent a ten-month exposure to field conditions, showing varied degradation. The jute and hemp nonwoven mulches degraded completely within the test period, whereas their blends with PLA fibers exhibited slowed degradation. This study indicated that PLA fibers in blends with jute, hemp, and viscose mulches slowed degradation, impacting their structural integrity and tensile properties. The tensile properties of nonwoven mulches blended with 20% of PLA fibers increased the breaking forces after field exposure. Observations on structural changes through microscopy highlighted the structure maintenance in jute and hemp blends due to the non-degraded PLA fibers, contrasting the complete degradation of 100% jute and hemp mulches. A microscopic analysis revealed alterations in the fiber structure and density changes, particularly in viscose mulches and their blends with PLA fibers. Soil temperature variations were observed under different mulches; e.g., agro foil consistently exhibited higher temperatures compared to nonwoven mulches. Notably, the hemp and jute/PLA blend mulches showed slightly elevated temperatures, while the viscose-based mulches consistently revealed the lowest temperatures. Regarding soil moisture, the nonwoven mulches generally maintained higher moisture levels compared to the control field and agro foil from June to October. These findings suggest that nonwoven mulches effectively preserved soil moisture during critical growth periods, potentially positively impacting plant growth. The weed suppression capabilities varied among mulches, with hemp mulch initially displaying the lowest suppression ability in the first six months. The addition of 20% of PLA fibers in mulch blends with viscose, jute, and hemp notably improved the weed control capabilities. Understanding the impacts of field conditions on newly produced nonwoven mulches is crucial for optimizing mulch selection in agricultural practices to enhance soil conditions and weed management. [ABSTRACT FROM AUTHOR]

The treatment of agricultural and forest residues (AFRs) has become an important issue nowadays, both to avoid improper management and for their enhancement. In the study area of Viseu (Portugal), the AFRs are taken to a Residual Biomass Collection Centre. These are valorised in a Biomass Power Plant to produce electricity. Two further processes could be implemented to valorise this biomass: mulching and composting. This study aims to understand the best strategy to enhance this type of biomass residual considering their environmental performance. The Life Cycle Assessment (LCA) was applied considering a cradle-to-grave approach. Different processes of all the technologies were analysed, and the data collected enabled a comparison of 11 environmental impact categories. The results show that composting is the best alternative, except for global warming and ozone layer depletion, and energy valorisation has the greatest impact on five of the considered categories. In the three processes, impacts are mainly associated with the production and shredding phases of the residual biomass, rather than the transportation stages, due to the short distances covered. In all cases, the value of the final product generates market consequences in terms of electricity and fertiliser production. In line with the aim of the study, its outcomes may provide scientific support to local decision makers in defining best practices in the management of the AFRs. [ABSTRACT FROM AUTHOR]

Water is an important factor limiting the development of arid rain-fed agriculture. Film mulching is an effective way to ensure yield in arid areas. However, whether biodegradable film can be used instead of polyethylene film for agricultural production in arid areas is a matter of contention. In this study, AquaCrop model simulation and field experiment were used to analyze the production effect of corn whole film double ridge furrow sowing technology covering polyethylene film (PM) and biodegradable film (BM) in Dingxi City from 2016 to 2020. The results showed that the AquaCrop simulation data have a high fitting with the field test data, and the model was suitable for simulating dry farming in Dingxi City. The best sowing time in Dingxi City is to select the average temperature to be stable at about 15 °C (around 15 April to 25 April each year), and the yield is the highest after sowing during this period. Although BM can achieve environmental protection and energy saving, it is weaker than PM in water storage and soil evaporation inhibition in arid areas. The average yield, aboveground biomass, water productivity, and harvest index of PM were 63.95%, 18.57%, 76.35%, and 38.22% higher than those of BM, respectively. In drought years, BM water stress on leaf expansion, induced stomatal closure, and premature senescence were 61%, 17%, and 9.5% higher than PM, respectively, and the stress time was 28.5 d, 5 d, and 26 d, respectively. The maximum canopy coverage and effective root zone water content were 24.5% and 30.49% lower, respectively. In the wet year, water stress under BM only had a certain effect on the leaf expansion of crops but had no effect on the induction of stomatal closure and premature senescence. The maximum canopy coverage and effective root zone water content were 13.56% and 31.35% lower, respectively. The above studies show that BM has a certain ability to store water and preserve moisture, but the parameters of PM are better than BM. Especially in dry years, the crop production efficiency of PM is more significant. It can be seen that in rain-fed agricultural areas with rainfall less than 500 mm, biodegradable film can not replace polyethylene film. [ABSTRACT FROM AUTHOR]

The grain-filling process is a key stage in ensuring a high yield of maize. Nitrogen is one of the nutrient elements most essential for maize, especially in cold and arid areas. To evaluate the effects of plastic-film mulching and nitrogen application on the maize grain-filling process, the impact of different plastic-film mulching (degradable plastic film, J; common plastic-film mulching, P) and nitrogen fertilizer levels (0 kg·ha−1, N0; 160 kg·ha−1, N1; 320 kg·ha−1, N2; 480 kg·ha−1, N3) on maize grain-filling characteristic parameters and final 100-kernel weight were tested in 2021 and 2022. The results showed that the interaction between film mulching and nitrogen application significantly (p < 0.05) affected the filling characteristic parameters and final 100-kernel weight of maize. The final 100-kernel weight was highest at the N2 nitrogen application level, which was 7.69–38.13% higher under degradable plastic-film mulching and 3.17–38.06% higher under common plastic-film mulching than at other levels. The nitrogen application level significantly (p < 0.05) increased grain-filling duration and rate. The duration time in reaching the maximum grain-filling rate under the N2 nitrogen application level was around 1.1967–5.7835 d under degradable plastic-film mulching and 2.8688–8.1704 d under the common plastic-film mulching, with the maximum and average grain-filling rate increased by 0.0595–0.2063 g·d−1 and 0.0447–0.1423 g·d−1 under degradable film mulching and 0.1418–0.3058 g·d−1 and 0.1082–0.2125 g·d−1 under common film mulching, respectively. The nitrogen application levels of N2 and N3 under two plastic-film mulching methods prolonged the duration of the rapid and slow increase period of grain filling and increased the grain-filling rate and the average rate. The average grain-filling rate at the N2 level increased by 0.0469–0.1759 g·d−1 and 0.0090–0.0454 g·d−1 under degradable film mulching and 0.1113–0.2581 g·d−1 and 0.0203–0.0648 g·d−1 under common film mulching, respectively. Therefore, common plastic film mainly prolonged the duration of the gradual increase period of grain filling and increased the grain-filling rate; meanwhile, the effect of degraded plastic film on the grain-filling rate increase and prolonging of the grain-filling duration was gradually highlighted during the rapid and the slow period of increase. In addition, the 320 kg·ha−1 of nitrogen application level under both common plastic-film mulching and degradable-film mulching was more conducive to prolonging the grain-filling duration of maize, which increased the grain-filling rate and 100-kernel weight, laying a foundation for a high yield of maize. [ABSTRACT FROM AUTHOR]

Different types of mulch are often used in agricultural production to enhance soil moisture and improve crop yields. The question of which mulch provides superior water retention in arid regions, where water resources are scarce, is a major concern for agricultural production. We conducted observations and studies at a typical irrigated experimental station in an arid zone with four types of mulch, including liquid mulch (LM), biodegradable mulch (BM), ordinary black mulch (OBM), and ordinary white mulch (OWM), and plots with no mulch. Samples were collected and analyzed at 1, 3, 5, and 7 days after each rainfall or irrigation to obtain soil moisture changes and to analyze the effect of different mulches on soil moisture retention. The results showed that mulch cover was effective in retaining soil moisture compared to plots without mulch cover. Specifically, soil moisture was highest in the farmland with OWM during the observation period. OWM, OBM, and BM were all effective in reducing soil water evaporation and maintaining soil moisture. LM and BM were capable of utilizing rainfall to recharge soil water in a superior way, and polyethylene mulches (OBM and OWM) had a significant barrier impact on rainfall. [ABSTRACT FROM AUTHOR]

To conduct an in-depth investigation of the impact of various operating parameters on mulching device wear during the operation of full-film dual-row ridging and mulching machine mulching, this paper employed EDEM software to create a 3D discrete element model of how a mulching device interacts with the soil on the seed bed and simulated the dynamic process of the interaction between the mulching device and the soil during the mulching operation. We analyzed the cladding wear process between the cladding device and the cladding sand particles, and two areas of impact wear on the overburden conveyor housing and areas of wear on the chute deflector scratches were detected. A three-factor, three-level Box–Behnken experimental design approach was used, with mathematical modeling of the relationship between the scraper conveyor lifting line speed, seed bed cover, scraper spacing, and wear of the cover device, finding the optimal combination of operating parameters for mulching devices. The results of the simulation test indicated that the mulching device experienced a minimum wear of 0.958 × 10−3 mm at a lifting line speed of 0.7 m·s−1 for the scraper conveyor, a mulching volume of 2.55 kg·s−1 for the seed bed, and a scraper spacing of 98 mm. The results of the field trial validation showed that, in a comparison between simulated wear parts and a mulching operation prototype of the same two wear parts, the established discrete element model appeared reasonable concerning the structural parameters, with a feasible abrasion mechanism process of sand particles on the soil-covering devices, demonstrating the model's reliability and validity. It can serve as a guide for optimizing the design of mechanized full-film dual-furrow seed bed mulching operation. [ABSTRACT FROM AUTHOR]