Search

Carvedilol (CARV) is a blocker of α- and β- adrenergic receptors, used as an "off-label" treatment for cardiovascular diseases in pediatrics. Currently, there is no marketed pediatric-appropriate CARV liquid formulation, so its development is necessary. Palatability (appreciation of smell, taste, and aftertaste) is a key aspect to be considered during the development of pediatric formulations since only formulations with good palatability also have adequate acceptability in this population. Consequently, the aim of this research was to assess the palatability and acceptability of different CARV formulations using an in vivo taste assessment (ID Number PR103/22) in order to select the highest palatability-rated CARV formulation. The preparation of CARV formulations was based on a reference 1 mg/mL CARV solution, which contains malic acid as a solubilizing agent. Subsequently, sucralose and flavoring agents were added and mixed until complete dissolution to the corresponding formulations. Adult volunteers participated in this study and evaluated the taste and odor of various CARV formulations through a questionnaire and a sensory test. The mean palatability score, measured on a 10-point scale, increased from 1.60 for the unflavored control to 7.65 for the highest-rated flavored formulation. Moreover, the bitterness of the optimized CARV formulation was reduced from 66.67% to 17.86%, and the taste pleasantness was increased from 25/100 to 73/100. This optimized CARV formulation contains a sweetening agent, sucralose, in addition to two flavoring agents at appropriate concentrations for pediatrics. Furthermore, the physicochemical and microbiological stability of the optimized CARV formulation were evaluated for 6 months at 25, 30, and 40 °C, in addition to in-use stability for 15 days at 25 °C, whose results were confirmed. Thus, we successfully developed a palatable CARV liquid solution that contains excipients appropriate for pediatrics and is stable under the studied conditions.

Prospectively planned designs of experiments (DoEs) offer a valuable approach to preventing collinearity issues that can result in statistical confusion, leading to misinterpretation and reducing the predictability of statistical models. However, it is also possible to develop models using historical data, provided that certain guidelines are followed to enhance and ensure proper statistical modeling. This article presents a methodology for constructing a design space using process data, while avoiding the common pitfalls associated with retrospective data analysis. For this study, data from a real wet granulation process were collected to pragmatically illustrate all the concepts and methods developed in this article.

Cationic solid-lipid nanoparticles (cSLNs) have become a promising tool for gene and RNA therapies. PEGylation (PEG) is crucial in enhancing particle stability and protection. We evaluated the impact of PEG on the physicochemical and biological characteristics of cholesteryl-oleate cSLNs (CO-cSLNs). Several parameters were analyzed, including the particle size, polydispersity index, zeta potential, shape, stability, cytotoxicity, and loading efficiency. Five different formulations with specific PEGs were developed and compared in both suspended and freeze-dried states. Small, homogeneous, and cationic suspended nanoparticles were obtained, with the Gelucire 50/13 (PEG-32 hydrogenated palm glycerides; Gelucire) and DSPE-mPEG2000 (1,2-distearoyl-phosphatidylethanolamine-methyl-polyethyleneglycol conjungate-2000; DSPE) formulations exhibiting the smallest particle size (~170 nm). Monodisperse populations of freeze-dried nanoparticles were also achieved, with particle sizes ranging from 200 to 300 nm and Z potential values of 30-35 mV. Notably, Gelucire again produced the smallest particle size (211.1 ± 22.4), while the DSPE and Myrj S100 (polyoxyethylene (100) stearate; PEG-100 Stearate) formulations had similar particle sizes to CO-cSLNs (~235 nm). The obtained PEGylated nanoparticles showed suitable properties: they were nontoxic, had acceptable morphology, were capable of forming SLNplexes, and were stable in both suspended and lyophilized states. These PEG-cSLNs are a potential resource for in vivo assays and have the advantage of employing cost-effective PEGs. Optimizing the lyophilization process and standardizing parameters are also recommended to maintain nanoparticle integrity.

Liquid formulations are mostly used in the paediatric population. However, with certain active pharmaceutical ingredients (APIs), it is very difficult to guarantee quality and stability; this is the case, for example, with omeprazole. Omeprazole is used as a model drug due to the lack of a paediatric formulation meeting gastro-resistance requirements, which remains a challenge today. In this experimental study, the development of enteric polymer-coated pellets is proposed. It is proposed to use aqueous coating dispersions without the use of organic solvents, which are commonly used in fluidised bed coatings. To do this, the design of experiments method is used as a statistical tool for experiment creation and the subsequent analysis of the responses. In particular, this study uses a randomised full factorial design. The mean weight increases of the protective layer and the enteric coating are chosen as factors. Each factor is assigned two levels. Therefore, the design of the used experiments is a 2 2 + 1 central point. Overall, the obtained pellets can be an alternative to the compounding formulas of omeprazole that are currently used in the paediatric population, which do not meet the gastro-resistance specifications necessary to guarantee the therapeutic efficacy of this active ingredient.

Carvedilol (CARV) is an 'off-label' β-blocker drug to treat cardiovascular diseases in children. Since CARV is nearly insoluble in water, only CARV solid forms are commercialized. Usually, CARV tablets are manipulated to prepare an extemporaneous liquid formulation for children in hospitals. We studied CARV to improve its aqueous solubility and develop an oral solution. In this study, we assessed the solubility and preliminary stability of CARV in different pH media. Using malic acid as a solubility enhancer had satisfactory results. We studied the chemical, physical, and microbiological stability of 1 mg/mL CARV-malic acid solution. A design of experiment (DoE) was used to optimize the CARV solution's preparation parameters. A 1 mg/mL CARV solution containing malic acid was stable for up to 12 months at 25 °C and 30 °C and 6 months at 40 °C. An equation associating malic acid with CARV concentrations was obtained using DoE. Microbiological data showed that the use of methylparaben was not necessary for this period of time. We successfully developed an aqueous CARV solution suitable for paediatrics and proven to be stable over a 12-month period.

During the development of an oral solid form of a drug substance, a thorough understanding of the critical material attributes is necessary, as the physical properties of the active pharmaceutical ingredient (API) can profoundly influence the drug product's manufacturability, critical quality attributes, and bioavailability. The objective of this study was to validate the manufacturing process of the drug Linezolid from three different sources at both the pilot and industrial scale and to identify differences in critical material attributes between the API manufacturers. Furthermore, the scalability factor between the pilot and industrial scale and the suitability of a process for direct compression were also evaluated. In the present study, the different sources of API were characterized by SeDeM methodology, particle size distribution, and scanning electron microscopy determinations. The statistical analysis revealed that no statistically significant differences were found for any of the parameters under study for the same API source analyzed on both scales. On the other hand, for most of the parameters evaluated, statistical differences were observed between the different sources. It was concluded that SeDeM was able to successfully validate the API manufacturing process, assess scalability, and distinguish between sources. Therefore, it could be highly valuable in the formulation phase to select the best API source.

Currently, the mechanisms involved in drug access to the central nervous system (CNS) are not completely elucidated, and research efforts to understand the behaviour of the therapeutic agents to access the blood-brain barrier continue with the utmost importance. The aim of this work was the creation and validation of a new in vitro model capable of predicting the in vivo permeability across the blood-brain barrier in the presence of glioblastoma. The selected in vitro method was a cell co-culture model of epithelial cell lines (MDCK and MDCK-MDR1) with a glioblastoma cell line (U87-MG). Several drugs were tested (letrozole, gemcitabine, methotrexate and ganciclovir). Comparison of the proposed in vitro model, MDCK and MDCK-MDR1 co-cultured with U87-MG, and in vivo studies showed a great predictability for each cell line, with R2 values of 0.8917 and 0.8296, respectively. Therefore, both cells lines (MDCK and MDCK-MDR1) are valid for predicting the access of drugs to the CNS in the presence of glioblastoma.

Although some methods for measuring bioadhesion/mucoadhesion have been proposed, a standardized method is not yet available. This is expected to hinder systematic comparisons of results across studies. This study aimed to design a single/systematic in vitro method for measuring bioadhesion/mucoadhesion that is applicable to various pharmaceutical dosage forms. To this end, we measured the peak force and work of adhesion of minitablets, pellets, and a bioadhesive emulsion using a texture analyzer. Porcine tissue was used to simulate human stomach/skin conditions. The results of these formulations were then compared to those for formulations without the bioadhesive product. We conducted a case study to assess the stability of a bioadhesive emulsion. The results for the two parameters assessed were contact time = 60 s and contact force = 0.5 N at a detachment speed of 0.1 mm/s. Significant differences were observed between the bioadhesive and control formulations, thus demonstrating the adhesive capacity of the bioadhesive formulations. In this way, a systematic method for assessing the bioadhesive capacity of pharmaceutical dosage forms was developed. The method proposed here may enable comparisons of results across studies, i.e., results obtained using the same and different pharmaceutical formulations (in terms of their bioadhesion/mucoadhesion capacity). This method may also facilitate the selection of potentially suitable formulations and adhesive products (in terms of bioadhesive properties).

The purpose was to show, using destructive/nondestructive methods, that the interplay between water, tablet structure, and composition determine the unique spatiotemporal hydration pattern of polymer-based matrices. The tablets containing a 1:1 w / w mixture of sodium alginate with salicylic acid (ALG/SA) or sodium salicylate (ALG/SNA) were studied using Karl Fischer titration, differential scanning calorimetry, X-ray microtomography, and magnetic resonance imaging. As the principal results, matrix specific features were detected, e.g., "locking" of the internal part of the matrix (ALG/SA); existence of lamellar region associated with detection of free/freezing water (ALG/SA); existence of water penetrating the matrix forming specific region preceding infiltration layer (ALG/SNA); switch in the onset temperature of endothermic water peak associated with an increase in the fraction of non-freezing water weight per dry matrix weight in the infiltration layer (ALG/SNA). The existence of complicated spatiotemporal hydration patterns influenced by matrix composition and molecular properties of constituents has been demonstrated.

Coffee Leaf Rust (CLR) is a fungal epidemic disease that has been affecting coffee trees around the world since the 1980s. The early diagnosis of CLR would contribute strategically to minimize the impact on the crops and, therefore, protect the farmers' profitability. In this research, a cyber-physical data-collection system was developed, by integrating Remote Sensing and Wireless Sensor Networks, to gather data, during the development of the CLR, on a test bench coffee-crop. The system is capable of automatically collecting, structuring, and locally and remotely storing reliable multi-type data from different field sensors, Red-Green-Blue (RGB) and multi-spectral cameras (RE and RGN). In addition, a data-visualization dashboard was implemented to monitor the data-collection routines in real-time. The operation of the data collection system allowed to create a three-month size dataset that can be used to train CLR diagnosis machine learning models. This result validates that the designed system can collect, store, and transfer reliable data of a test bench coffee-crop towards CLR diagnosis.

Health professionals are the most influential and main sources of information about vaccines for the general population, as they are regarded as role models by patients and society. The objective of the present study was to determine the knowledge and attitudes of a group of university Nursing students about vaccines, as well as their sources of information and their education needs. A cross-sectional study was performed through a questionnaire (55 items) provided to Nursing students at two Spanish universities. A total of 1122 students participated in the study. The mean score obtained for knowledge about vaccines was 44.6 ± 4.3, and for attitudes towards vaccines, it was 37.2 ± 3.9. Hepatitis B (94.7%) and the Flu (89%) are the two main vaccines they should receive as health workers. The main source of information was the family environment (65.6%). Most of them considered that post-graduate education about vaccines should be provided by academic entities (universities, 62.7%). Among the health professionals, Nurses (85.5%) must be better educated and trained on the subject of vaccines. It is therefore necessary to delve into and complete the nurses' training on vaccines, to educate them about the risks at the individual level, and their decisive role as promoters of the vaccination strategy for the general population. Universities must become the leaders in vaccine education and training.

This theoretical study seeks to critically review the use of excipients in the paediatric population. This study is based on the rules and recommendations of European and American drug regulatory agencies. On the one hand, this review describes the most frequent excipients used in paediatric medicine formulations, identifying the compounds that scientific literature has marked as potentially harmful regarding the side effects generated after exposure. On the other hand, this review also highlights the importance of carrying out safety -checks on the excipients, which, in most cases, are linked to toxicity studies. An excipient in the compilation of paediatric population databases is expected to target safety and toxicity, as in the STEP database. Finally, a promising pharmaceutical form for child population, ODT (Orally Disintegrating Tablets), will be studied.

Methods of spatiotemporal characterization of nonequilibrated polymer based matrices are still immature and imperfect. The purpose of the study was to develop the methodology for the spatiotemporal characterization of water transport and properties in alginate tablets under hydration. The regions of low water content were spatially and temporally sampled using Karl Fisher and Differential Scanning Callorimetry (spatial distribution of freezing/nonfreezing water) with spatial resolution of 1 mm. In the regions of high water content, where sampling was infeasible due to gel/sol consistency, magnetic resonance imaging (MRI) enabled characterization with an order of magnitude higher spatial resolution. The minimally hydrated layer (MHL), infiltration layer (IL) and fully hydrated layer (FHL) were identified in the unilaterally hydrated matrices. The MHL gained water from the first hour of incubation (5-10% w / w ) and at 4 h total water content was 29-39% with nonfreezing pool of 28-29%. The water content in the IL was 45-47% and at 4 h it reached ~50% with the nonfreezing pool of 28% and T 2 relaxation time < 10 ms. The FHL consisted of gel and sol layer with water content of 85-86% with a nonfreezing pool of 11% at 4 h and T 2 in the range 20-200 ms. Hybrid destructive/nondestructive analysis of alginate matrices under hydration was proposed. It allowed assessing the temporal changes of water distribution, its mobility and interaction with matrices in identified layers.

The objective of these studies is to verify and validate the improvement in the inter-tablet coating uniformity for an industrially commercialized coated tablet, without involving changes in the approved registration dossier. Using the CPP (critical process parameters) determined from previous retrospective statistical analysis, the recommended working ranges are identified. Retrospective analysis showed that the design of experiments (DoE) provided an improved process variable configuration. Therefore, it is decided to study two critical parameters: Product temperature and drum speed, with an additional 2 2 experimental design. The quality results of the samples analyzed show that the aesthetic defects of the batches made with the new working ranges have been reduced. These results have also been corroborated with the 42 industrial batches manufactured with the new ranges. With the optimized parameters, tablets have been coated and the suitability of the model determined. The results demonstrated the overall reliability and effectiveness of the proposed Quality by Design approach and provides a useful tool to help optimize the industrial coating process. This study confirms that it is possible to optimize and validate the manufacturing process of an existing commercial product by means of a DoE with retrospective data. Therefore, no variation in the dossier is required.

Hydrophilic matrix tablets are a type of sustained release dosage form characterized by distributing a drug in a matrix that is usually polymeric. Tolcapone is a drug that inhibits the enzyme catechol- O -methyl transferase. In recent years, it has been shown that tolcapone is a potent inhibitor of the amyloid aggregation process of the transthyretin protein, and acts by stabilizing the structure of the protein, reducing the progression of familial amyloid polyneuropathy. The main objective of this study was to obtain a sustained release tablet of tolcapone for oral administration with a preferred dosage regimen of 1 administration every 12 or 24 h and manufactured, preferably, by direct compression. The SeDeM Diagram method has been used for the formulation development of hydrophilic matrix tablets. Given the characteristics of tolcapone, the excipient selected for the formation of the polymeric matrix was a high viscosity hydroxypropylmethylcellulose (Methocel ® K100M CR). A decrease in the particle size of tolcapone resulted in a slower dissolution release of the formulation when the concentration of the polymer Methocel ® K100M CR was below 29%. These surprising and novel results have given rise to patent number WO/2018/019997.

Several indolylquinone analogues of perezone, a natural sesquiterpene quinone, were characterized in this work by theoretical methods. In addition, some physicochemical, toxicological and metabolic properties were predicted using bioinformatics software. The predicted physicochemical properties are in agreement with the solubility and cLogP values, the penetration across the cell membrane, and absorption values, as well as with a possible apoptosis-activated mechanism of cytotoxic action. The toxicological predictions suggest no mutagenic, tumorigenic or reproductive effects of the four target molecules. Complementarily, the results of a performed docking study show high scoring values and hydrogen bonding values in agreement with the cytotoxicity IC 50 value ranking, i.e: indolylmenadione > indolylperezone > indolylplumbagine > indolylisoperezone. Consequently, it is possible to suggest an appropriate apoptotic pathway for each compound. Finally, potential metabolic pathways of the molecules were proposed., Competing Interests: The authors declare that there is no conflict of interest regarding the publication of this paper.

Electrospun scaffolds of neat poly-ε-caprolactone (PCL), poly-ε-caprolactone/β-cyclodextrin inclusion complex (PCL/β-CD) and poly-ε-caprolactone amino derivative inclusion complex (PCL/β-CD-NH₂) were prepared by the electrospinning technique. The obtained mats were analyzed by a theoretical model using the Hartree⁻Fock method with an STO-3G basis set, and characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), Fourier transform infrared spectroscopy-attenuated total reflectance (FTIR-ATR), differential scanning calorimetry (DSC), confocal-Raman spectroscopy, proton nuclear magnetic resonance (¹HNMR) and contact angle measure (CA). Different mixtures of solvents, such as dimethylformamide (DMF)-tetrahydrofuran (THF), dichlormethane (DCM)-dimethyl sulfoxide (DMSO) and 2,2,2-Trifluoroethanol (TFE), were tested in the fiber preparation. The results indicate that electrospun nanofibers have a pseudorotaxane structure and when it was prepared using a 2,2,2-Trifluoroethanol (TFE) as solvent, the nanofibers were electrospun well and, with the other solvents, fibers present defects such as molten fibers and bead-like defects into the fiber structure. This work provides insights into the design of PCL/β-CD-NH₂ based scaffolds that could have applications in the biomedical field.