Search

A novel integrated water vapor (IWV) product from TROPOspheric Monitoring Instrument (TROPOMI) is validated together with a Global Ozone Monitoring Instrument-2 (GOME-2) standard product. As reference, ground-based Global Navigation Satellite Systems (GNSS) IWV data in 235 European stations from May 2018 to May 2019 are used. Under cloud free situations, a general comparison is carried out. It suggests that TROPOMI IWV exhibits less bias than GOME-2 and better results in the dispersion and regression parameters. Moreover, TROPOMI presents more homogeneous results along the different stations. However, TROPOMI is found to be overestimating the IWV uncertainties and being, therefore, too conservative in the confidence interval considered. The dependence of satellite product performance on several variables is also discussed. TROPOMI IWV shows wet bias of 5.7% or less for IWV < 10 mm (TROPOMI) and dry bias of up to −3% (TROPOMI). In contrast, GOME-2 shows wet bias of 30% or less for IWV < 25 mm (GOME-2) and dry bias of −12.3% for IWV > 25 mm. In addition, relative standard deviation (rSD) increases as IWV increases. In addition, the dependence on solar zenith angle (SZA) was also analyzed, as solar radiation bands are used in the retrieval algorithm of both instruments. Relative mean bias error (rMBE) shows positive values for GOME-2, slightly increasing with SZA, while TROPOMI shows more stable values. However, under high SZA, GOME-2 IWV exhibits a steep increase in rMBE (overestimation), while TROPOMI IWV exhibits a moderate decrease (underestimation). rSD is slightly increasing with SZA. The influence of cloudiness on satellite IWV observations is such that TROPOMI tends to overestimate IWV more as cloudiness increases, especially for high IWV. In the case of GOME-2, the rSD slightly increases with cloudiness, but TROPOMI rSD has a marked increase with increasing cloudiness. TROPOMI IWV is an important source of information about moisture, but its algorithm could still benefit from further improvement to respond better to cloudy situations. [ABSTRACT FROM AUTHOR]

We present a novel passive satellite remote sensing approach for observing the three-dimensional distribution of aerosols emitted from wildfires. This method, called AEROS5P, retrieves vertical profiles of aerosol extinction from cloud-free measurements of the TROPOMI satellite sensor onboard the Sentinel 5 Precursor mission. It uses a Tikhonov–Phillips regularization, which iteratively fits near-infrared and visible selected reflectances to simultaneously adjust the vertical distribution and abundance of aerosols. The information on the altitude of the aerosol layers is provided by TROPOMI measurements of the reflectance spectra at the oxygen A-band near 760 nm. In the present paper, we use this new approach for observing the daily evolution of the three-dimensional distribution of biomass burning aerosols emitted by Australian wildfires on 20–24 December 2019. Aerosol optical depths (AOD) derived by vertical integration of the aerosol extinction profiles retrieved by AEROS5P are compared with MODIS, VIIRS and AERONET coincident observations. They show a good agreement in the horizontal distribution of biomass burning aerosols, with a correlation coefficient of 0.87 and a mean absolute error of 0.2 with respect to VIIRS. Moderately lower correlations (0.63) were found between AODs from AEROS5P and MODIS, while the range of values for this comparison was less than half of that with respect to VIIRS. A fair agreement was found between coincident transects of vertical profiles of biomass burning aerosols derived from AEROS5P and from the CALIOP spaceborne lidar. The mean altitudes of these aerosols derived from these two measurements showed a good agreement, with a small mean bias (185 m) and a correlation coefficient of 0.83. Moreover, AEROS5P observations reveal the height of injection of the biomass burning aerosols in 3D. The highest injection heights during the period of analysis were coincident with the largest fire radiative power derived from MODIS. Consistency was also found with respect to the vertical stability of the atmosphere. The AEROS5P approach provides retrievals for cloud-free scenes over several regions, although currently limited to situations with a dominating presence of smoke particles. Future developments will also aim at observing other aerosol species. [ABSTRACT FROM AUTHOR]

In this paper, we present neural network methods for predicting uncertainty in atmospheric remote sensing. These include methods for solving the direct and the inverse problem in a Bayesian framework. In the first case, a method based on a neural network for simulating the radiative transfer model and a Bayesian approach for solving the inverse problem is proposed. In the second case, (i) a neural network, in which the output is the convolution of the output for a noise-free input with the input noise distribution; and (ii) a Bayesian deep learning framework that predicts input aleatoric and model uncertainties, are designed. In addition, a neural network that uses assumed density filtering and interval arithmetic to compute uncertainty is employed for testing purposes. The accuracy and the precision of the methods are analyzed by considering the retrieval of cloud parameters from radiances measured by the Earth Polychromatic Imaging Camera (EPIC) onboard the Deep Space Climate Observatory (DSCOVR). [ABSTRACT FROM AUTHOR]

To retrieve aerosol properties from satellite measurements, micro-physical aerosol models have to be assumed. Due to the spatial and temporal inhomogeneity of aerosols, choosing an appropriate aerosol model is an important task. In this paper, we use a Bayesian algorithm that takes into account model uncertainties to retrieve the aerosol optical depth and layer height from synthetic and real TROPOMI O 2 A band measurements. The results show that in case of insufficient information for an appropriate micro-physical model selection, the Bayesian algorithm improves the accuracy of the solution. [ABSTRACT FROM AUTHOR]

The retrieval of aerosol and cloud properties such as their optical thickness and/or layer/top height requires the selection of a model that describes their microphysical properties. We demonstrate that, if there is not enough information for an appropriate microphysical model selection, the solution's accuracy can be improved if the model uncertainty is taken into account and appropriately quantified. For this purpose, we design a retrieval algorithm accounting for the uncertainty in model selection. The algorithm is based on (i) the computation of each model solution using the iteratively regularized Gauss–Newton method, (ii) the linearization of the forward model around the solution, and (iii) the maximum marginal likelihood estimation and the generalized cross-validation to estimate the optimal model. The algorithm is applied to the retrieval of aerosol optical thickness and aerosol layer height from synthetic measurements corresponding to the Earth Polychromatic Imaging Camera (EPIC) instrument onboard the Deep Space Climate Observatory (DSCOVR) satellite. Our numerical simulations show that the heuristic approach based on the thesolution minimizing the residual, which is frequently used in literature, is completely unrealistic when both the aerosol model and surface albedo are unknown. [ABSTRACT FROM AUTHOR]

An algorithm for retrieving aerosol parameters by taking into account the uncertainty in aerosol model selection is applied to the retrieval of aerosol optical thickness and aerosol layer height from synthetic measurements from the EPIC sensor onboard the Deep Space Climate Observatory. The synthetic measurements are generated using aerosol models derived from AERONET measurements at different sites, while other commonly used aerosol models, such as OPAC, GOCART, OMI, and MODIS databases are used in the retrieval. The numerical analysis is focused on the estimation of retrieval errors when the true aerosol model is unknown. We found that the best aerosol model is the one with a value of the asymmetry parameter and an angular variation of the phase function around the viewing direction that is close to the values corresponding to the reference aerosol model. [ABSTRACT FROM AUTHOR]

In this work, we address the image geolocation issue that is present in the imagery of EPIC/DSCOVR (Earth Polychromatic Imaging Camera/Deep Space Climate Observatory) Level 1B version 2. To solve it, we develop an algorithm that automatically computes a registration correction consisting of a motion (translation plus rotation) and a radial distortion. The correction parameters are retrieved for every image by means of a regularised non-linear optimisation process, in which the spatial distances between the theoretical and actual locations of chosen features are minimised. The actual features are found along the coastlines automatically by using computer vision techniques. The retrieved correction parameters show a behaviour that is related to the period of DSCOVR orbiting around the Lagrangian point L 1 . With this procedure, the EPIC coastlines are collocated with an accuracy of about 1.5 pixels, thus significantly improving the original registration of about 5 pixels from the imagery of EPIC/DSCOVR Level 1B version 2. [ABSTRACT FROM AUTHOR]