Search

Aquatic products are good sources of essential nutrients, but the presence of pyrethroids (PYRs) as contaminants may pose risks to consumer health as the intricate matrices of PYRs usually obstruct chemical hazard detection. In this study, a gas chromatographic method was established and validated for simultaneously detecting residues of seven PYRs (cyhalothrin, permethrin, cyfluthrin, cypermethrin, tau-fluvalinate, fenvalerate, deltamethrin) in aquatic products. The aim of this method was to assess better the potential risks of pesticide residues in aquatic products. The PYRs in aquatic products were extracted with acetonitrile, purified with n-hexane saturated with acetonitrile, and cleaned up on a Cleanert® Alumina N column. Statistical analysis and orthogonal array experimental design were used to optimize the key parameters. To validate the proposed method, commonly consumed aquatic products (such as carp, crucian carp, whiteleg shrimp, river crab, sea cucumber, and scallop) were obtained from local supermarkets in Shanghai. Satisfied linearity of the calibration curves was achieved in a matrix-matched standard solution, with a correlation coefficient (R2) larger than 0.995. The average recoveries at five fortification levels varied from 77.0% to 117.2%, with relative standard deviations (RSDs) below 11.1%. Concerning electron capture detection, the limits of detection (LOD) and limits of quantification (LOQ) were 2.0–5.0 µg/kg and 5.0–10.0 µg/kg, respectively. These results demonstrate the high stability and sensitivity of this method for simultaneously detecting PYRs in aquatic products, having great practicability and which can be popularized easily. [ABSTRACT FROM AUTHOR]

The removal of decabromodiphenyl ether (BDE 209), as a typical persistent organic pollutant (POP), is of worldwide concern. Mechanochemical (MC) processes are promising methods to degrade environmental pollutants, most of which use a single grinding reagent. The performance of MC processes with co-milling agents still needs to be further verified. In this study, an efficient MC treatment with combined utilization of lithium cobalt oxide (LiCoO2) and iron (Fe) as co-milling reagents for BDE 209 degradation was investigated. The synchronous action of LiCoO2 and Fe with a LiCoO2/Fe/Br molar ratio of 1.5:1.67:1 and a ball-to-powder ratio of 100:1 led to almost thorough-paced abatement and debromination of BDE 209 within 180 min using a ball milling rotation speed of 600 rpm. The reduction in particle sizes and the destruction of crystal structure in mixture powders with the increase in milling time induced the enhanced degradation of BDE 209, as characterized by scanning electron microscopy (SEM) and X-ray diffraction (XRD). The X-ray photoelectron spectroscopy (XPS) characterization showed that the valence state of Co was converted from Co(III) to Co(II), and Fe(0) was changed to Fe(III) when treated with an MC process. This indicated that the reductive debromination of BDE 209 by Fe and the following oxidative degradation of debrominated products by LiCoO2 were integrated in a concerted way. It proved the removal of BDE 209 via an MC treatment. The full breakage of C-Br and C-O bonds in BDE 209 was confirmed by Fourier transform-infrared spectrometry (FT-IR) spectra, and a possible abatement pathway was also proposed based on the identified intermediate products using gas chromatography–mass spectrometry (GC-MS). These obtained results indicated that a combination of LiCoO2 and Fe as co-milling reagents is promising in the MC treatment of toxic halogenated pollutants like BDE 209. [ABSTRACT FROM AUTHOR]

With the massive use of lithium-ion batteries in electric vehicles and energy storage, the environmental and resource problems faced by used lithium-ion batteries are becoming more and more prominent. In order to better resource utilization and environmental protection, this paper employs bibliometric and data analysis methods to explore publications related to waste lithium-ion battery recycling from 1984 to 2021. The Web of Science core set from the SCIE online database was used for this article. These findings demonstrate a considerable increase trend in the number of publications published in the subject of recycling used lithium-ion batteries, with a natural-sciences-centric focus. Argonne National Lab, Chinese Academy of Sciences, and China Academic and Scientific Research Center are the top three institutions in terms of quantity of papers published. The affiliated journals corresponding to these three institutions also have high impact factors, which are 106.47, 44.85, and 58.69, respectively. In comparison to comparable institutes in other nations, the American Argonne National Laboratory supports 223 research articles in this area. China and the US make up the majority of the research's funding. The two key aspects of current lithium-ion battery recycling research are material structure research and environmentally friendly recycling. Nevertheless, high-capacity lithium-ion batteries, waste lithium-ion integrated structures, and gentle recycling of spent lithium-ion batteries will be the major aspects of study in the future. It is hoped that the above analysis can bring new ideas and methods to the field of waste lithium-ion battery recycling and provide a basis for the subsequent research and application of waste lithium-ion battery recycling. [ABSTRACT FROM AUTHOR]

To further understand the application of g-C3N4 in the field of photocatalysis, this study focuses on the visualization and analysis of articles in this field using VOSviewer and Citespace. These articles were analyzed in terms of number of articles, journals, authors, countries and keywords, respectively. The results show that there is little collaboration among the core authors in this field and insufficient cross-directional communication; the current applications of g-C3N4 are concentrated on hydrogen evolution, CO2 reduction and water treatment. The developing trend is in the direction of constructing Z-scheme structures, regulating the separation of photogenerated carriers and reducing the recombination rate, to which more and more attention is being paid. In the future, cross-directional communication among scholars can be strengthened to promote faster development of the field of photocatalytic applications of g-C3N4. [ABSTRACT FROM AUTHOR]

Dams have made great contributions to human society, facilitating flood control, power generation, shipping, agriculture, and industry. However, the construction of dams greatly impacts downstream ecological environments and nearby marine areas. The present manuscript presents a comprehensive review of the influence of human activities on the environment, especially the effect of dam construction on the ecosystems of river estuaries and nearby marine areas, so as to provide a scientific basis for ecological environment protection. To summarize these impacts, this review used recent studies to comprehensively analyze how dam construction has affected river hydrology, geomorphology, and downstream ecosystems globally. Effects of dams on ecosystems occur through reduced river flow, reduced sediment flux, altered water temperature, changed estuary delta, altered composition and distribution of nutrients, altered structure and distribution of phytoplankton populations, habitat fragmentation, and blocked migration routes in river sections and adjacent seas. Effects of dam construction (especially the Three Gorges Dam) on the Yangtze River were also reviewed. Performing community and mitigation planning before dam construction, exploring new reservoir management strategies (including targeted control of dam storage and flushing sediment operations), banning fishing activities, and removing unnecessary dams (obsolete or small dams) are becoming crucial tools for ecosystem restoration. [ABSTRACT FROM AUTHOR]

A sensitive and reliable method was developed to determine methylene blue (MB) and its metabolite residues, including azure A (AZA), azure B (AZB), and azure C (AZC) in aquatic products by HPLC–MS/MS. The samples were extracted by acetonitrile and cleaned up by alumina-neutral (ALN) cartridges. The analytes were separated on a Sunfire C18 column (150 mm × 2.1 mm, 5 µm). The method was validated according to the European criteria of Commission Decision 2002/657/CE. Good linearity between 1–500 µg/L was obtained with correlation coefficients (R2) greater than 0.99. The limit of quantification (LOQ) was 1.0 µg/kg. The average recoveries at three levels of each compound (1, 5, and 10 µg/kg) were demonstrated to be in the range of 71.8–97.5%, with relative standard deviations (RSDs) from 1.05% to 8.63%. This method was suitable for the detection of methylene blue and its metabolite residues in aquatic products. [ABSTRACT FROM AUTHOR]