Search

The poor processing and rheological properties of highly filled composites caused by the high loading of fillers can be improved with the use of maleic anhydride grafted polyethylene wax (PEWM) as compatibilizer and lubricant. In this study, two PEWMs with different molecular weights were synthesized by melt grafting, and their compositions and grafting degrees were characterized by Fourier transform infrared (FTIR) spectroscopy and acid-base titration. Subsequently, magnesium hydroxide (MH)/linear low-density polyethylene (LLDPE) composites with 60 wt% of MH were prepared using polyethylene wax (PEW) and PEWM, respectively. The equilibrium torque and melt flow index tests indicate that the processability and fluidity of MH/MAPP/LLDPE composites are significantly improved with the addition of PEWM. The addition of PEWM with a lower molecular weight leads to a substantial reduction in viscosity. The mechanical properties are also increased. The limiting oxygen index (LOI) test and cone calorimeter test (CCT) show that both PEW and PEWM have adverse effects on flame retardancy. This study provides a strategy to simultaneously improve the processability and mechanical properties of highly filled composites. [ABSTRACT FROM AUTHOR]

Maleic anhydride-modified homopolymerized polypropylene (PP-g-MAH) and maleic anhydride-modified polyolefin elastomer (POE-g-MAH) were used as bulking agents to improve the poor processing and mechanical properties of highly filled composites due to high filler content. In this study, a series of linear low-density polyethylene (LLDPE)/magnesium hydroxide (MH) composites were prepared by the melt blending method, and the effects of the compatibilizer on the mechanical properties, flame retardancy, and rheological behavior of the composites were investigated. The addition of the compatibilizer decreased the limiting oxygen index (LOI) values of the composites, but they were all greater than 30.00%, which belonged to the flame retardant grade. Mechanical property tests showed that the addition of the compatibilizer significantly increased the tensile and impact strengths of the LLDPE/60MH (MH addition of 60 wt%) composites. Specifically, the addition of 5 wt% POE-g-MAH increased 154.07% and 415.47% compared to the LLDPE/60MH composites, respectively. The rotational rheology test showed that the addition of the compatibilizer could effectively improve the processing flow properties of the composites. However, due to the hydrocarbon structure of the compatibilizer, its flame retardant properties were adversely affected. This study provides a strategy that can improve the processing and mechanical properties of highly filled composites. [ABSTRACT FROM AUTHOR]