Search

This paper concentrates on the general birth–death processes with two different types of catastrophes. The Laplace transform of transition probability function for birth–death processes with two-type catastrophes is successfully expressed with the Laplace transform of transition probability function of the birth–death processes without catastrophe. The first effective catastrophe occurrence time is considered. The Laplace transform of its probability density function, expectation and variance are obtained. [ABSTRACT FROM AUTHOR]

Pseudorabies virus (PRV) variants have caused substantial economic losses in the swine industry in China since 2011. To surveil the genetic variation in PRV field strains, here, two novel variant strains of PRV were isolated from Shanxi Province in central China and were designated SX1910 and SX1911. To identify the genetic characteristics of the two isolates, their complete genomes were sequenced, and phylogenetic analysis and sequence alignment revealed that field PRV variants have undergone genetic variations; notably, the protein-coding sequences UL5, UL36, US1 and IE180 exhibited extensive variation and contained one or more hypervariable regions. Furthermore, we also found that the glycoproteins gB and gD of the two isolates had some novel amino acid (aa) mutations. Importantly, most of these mutations were located on the surface of the protein molecule, according to protein structure model analysis. We constructed a mutant virus of SX1911 with deletion of the gE and gI genes via CRISPR/Cas9. When tested in mice, SX1911-ΔgE/gI-vaccinated mice were protected within a comparable range to Bartha-K61-vaccinated mice. Additionally, a higher dose of inactivated Bartha-K61 protected the mice from lethal SX1911 challenge, while a lower neutralization titer, higher viral load and more severe microscopic lesions were displayed in Bartha-K61-vaccinated mice. These findings highlight the need for continuous monitoring of PRV and novel vaccine development or vaccination program design for PRV control in China. [ABSTRACT FROM AUTHOR]

Inorganic nanomaterials with enzyme-like activity have been attracting much attention due to their low cost, favorable stability, convenient storage, and simple preparation. Herein, Co3O4 nanoplates with a uniform nanostructure were prepared by the thermolysis of cobalt hydroxide at different temperatures, and the influence of the annealing temperature on the performance of the mimetic enzyme also was reported for the first time. The results demonstrated that Co3O4 nanoplates obtained at an annealing temperature of 200 °C possessed strong oxidase activity and efficiently catalyzed the oxidation of 3,3′,5,5′-tetramethylbenzidine (TMB) without the addition of hydrogen peroxide to generate the blue color product ox-TMB. Once the annealing temperature was increased to 500 °C and 800 °C, the oxidase activity of Co3O4 decreased rapidly, and was even inactivated. This might be attributed to the relatively large specific surface area of Co3O4 annealed at 200 °C. Besides this, based on the TMB-Co3O4 nanoplate system, a colorimetric analysis method was developed to detect dopamine with a limit of 0.82 μmol/L in a linear range from 1.6 μmol/L to 20 μmol/L. [ABSTRACT FROM AUTHOR]

In this study, friction stir welding (FSW) of 2-mm-thick Ti–6Al–4V alloy plates was performed using a newly designed friction tool—and the effect of rotation speed and welding speed on microstructure and mechanical properties of the joints were investigated. A simulation model for FSW temperature field calculation was developed, and the effect of rotation speed and welding speed on the temperature field was investigated by experimental and numeric methods. The results show that the rotation speed has a dominant effect on peak temperature, while welding speed determines the dwell time of the weld exposed to high temperatures. In addition, the influence of process parameters on the microstructure of the joints was investigated using optical and scanning electron microscopy. The results revealed that there was a phase transformation in the stir zone during welding. The final microstructure of the stir zone was fully lamellar (α + β) structure, and the heat affection zone had a bimodal microstructure consisting of prior equiaxed α and lamellar (α + β) structure. Both rotation speed and welding speed affect the grain size of the weld. Lower peak temperature with decreasing spindle speed and/or shorter dwell time with increasing feed rate could produce finer grains in the stir zone of the joints, thereby could lead to higher microhardness value and the tensile strength of the joints. [ABSTRACT FROM AUTHOR]

Here we show that when the temperature exceeded 1200 °C, the tensile strength drops sharply with change of fracture mode from fiber pull-out to fiber-break. Theoretical analysis indicates that the reduction of tensile strength and change of fracture mode is due to the variation of residual radial stress on the fiber–matrix interface coating. When the temperature exceeds the preparation temperature of the composites, the residual radial stress on the fiber–matrix interface coating changes from tensile to compressive, leading to the increase of the interface strength with increasing temperature. The fracture behavior of SiC–SiC composites changes from ductile to brittle when the strength of fiber–matrix interface coating exceeds the critical value. Theoretical analysis predicts that the high temperature tensile strength can increase with a decrease in fiber–matrix interface thickness, which is verified by experiments. [ABSTRACT FROM AUTHOR]

Non-wood forest products (NWFPs) derived from understory plants are attracting attention about sustainable forestry development. Geographical distribution and climate correlates of bioactive compounds are important to the regional management for the natural reserves of medical plants in forests. In this study, we collected Eleutherococcus senticosus individuals from 27 plots to map the special distribution of concentrations of eleutheroside B, eleutheroside E, and isofraxidin in forests of Northeast China. Compound concentrations in both aerial and underground organs were further detected for relationships with the average of 20-year records of temperature, precipitation, and relative humidity (RH). We found higher shoot eleutheroside B concentration in populations in northern and low-temperature regions (R = −0.4394; P = 0.0218) and in eastern and high-RH montane forests (R = 0.5003; P = 0.0079). The maximum-likelihood regression indicated that both RH (Pr > Chi-square, 0.0201) and longitude (Pr > Chi-square, 0.0026) had positive contributions to eleutheroside B concentration in roots, but precipitation had strongly negative contributions to the concentrations of eleutheroside E (Pr > Chi-square, 0.0309) and isofraxidin (Pr > Chi-square, 0.0014) in roots. Both geography and climate factors had effects on the special distribution of medical compounds in E. senticosus plants in natural populations in Northeast China. The management of NWFP plants at the regional scale should consider effects from climatic geography. [ABSTRACT FROM AUTHOR]

Cable-bolt failures due to stress corrosion cracking (SCC) could significantly compromise the sustainability and long-term stability of underground constructions. To fully understand the SCC of cable bolts, a two-step methodology was implemented: (i) long-term cable-bolt coupon tests using mineralogical materials collected from underground mines; and (ii) accelerated full-scale cable-bolt tests using an acidified solution. In the long-term tests, a novel three-point bending coupon was designed. The effects of mineralogical materials on SCC were evaluated under the simulated underground bolting conditions through the application of "corrosion cells". For accelerated tests, SCC resistance of different type of cable bolts was examined using the new designed tensile-loading apparatus under the periodically increasing strain-rate loading mechanism. It was identified that mineralogical materials and applied stress intensity accelerated the corrosion process of the cable bolts. The number of wires and wire surface conditions in different types of cable bolt directly affected SCC susceptibility. The cable bolts with a greater number of wires provided higher resistance to SCC. The developed experimental methodologies can be applied to study SCC in other reinforcement materials and the results can be used to design optimal support systems in different environmental and geotechnical conditions. [ABSTRACT FROM AUTHOR]

In this article, we are concerned with the E-Bayesian (the expectation of Bayesian estimate) method, the maximum likelihood and the Bayesian estimation methods of the shape parameter, and the reliability function of one-parameter Burr-X distribution. A hybrid generalized Type-II censored sample from one-parameter Burr-X distribution is considered. The Bayesian and E-Bayesian approaches are studied under squared error and LINEX loss functions by using the Markov chain Monte Carlo method. Confidence intervals for maximum likelihood estimates, as well as credible intervals for the E-Bayesian and Bayesian estimates, are constructed. Furthermore, an example of real-life data is presented for the sake of the illustration. Finally, the performance of the E-Bayesian estimation method is studied then compared with the performance of the Bayesian and maximum likelihood methods. [ABSTRACT FROM AUTHOR]

Bluetongue virus (BTV) is an important pathogen of wild and domestic ruminants. Despite extensive study in recent decades, the interplay between BTV and host cells is not clearly understood. Autophagy as a cellular adaptive response plays a part in many viral infections. In our study, we found that BTV1 infection triggers the complete autophagic process in host cells, as demonstrated by the appearance of obvious double-membrane autophagosome-like vesicles, GFP-LC3 dots accumulation, the conversion of LC3-I to LC3-II and increased levels of autophagic flux in BSR cells (baby hamster kidney cell clones) and primary lamb lingual epithelial cells upon BTV1 infection. Moreover, the results of a UV-inactivated BTV1 infection assay suggested that the induction of autophagy was dependent on BTV1 replication. Therefore, we investigated the role of autophagy in BTV1 replication. The inhibition of autophagy by pharmacological inhibitors (3-MA, CQ) and RNA interference (siBeclin1) significantly decreased viral protein synthesis and virus yields. In contrast, treating BSR cells with rapamycin, an inducer of autophagy, promoted viral protein expression and the production of infectious BTV1. These findings lead us to conclude that autophagy is activated by BTV1 and contributes to its replication, and provide novel insights into BTV-host interactions.