Search

The Wadi El-Rayan lakes are important aquatic environments located at the border of the great North African Sahara. Quantifying the temporal changes in these lakes due to natural and/or anthropogenic stressors is critical when assessing potential impacts on aquatic ecosystem health and the sustainability of fisheries. To detect the changes in fish communities and their drivers, the landing composition of the Wadi El-Rayan lakes over the past 30 years was quantitatively analyzed. The areas of the lakes dramatically decreased from 110 km2 in 1991 to 73 km2 in 2019. The loss of the lake area was attributed to climate warming, where the evaporation rate exceeded the volume of recharge and the recharge decreased due to an increase in agriculture and aquaculture. The total landing significantly increased in the past three decades due to an increase in the fishing effort (number of licensed boats). Nile tilapia, mullet, and grass carp dominated the landings. The pelagic-to-demersal ratio indicated a shift in the fish community composition towards demersal species. This shift was attributed to an increase in the eutrophication level. The fish communities of the landing data were clustered into four distinct groups. These clusters were significantly differentiated (p < 0.001) in both a PERMANOVA test and a PCA plot. There was a gradual replacement of the dominant species among these clusters. The most recent cluster (2018–2019) was characterized by rare species dominating the community. This shift in species composition suggests that target taxa may have been overexploited. The total landing also decreased, which may have been a result of climate warming. Furthermore, the presence of alien and warm-water species significantly increased. The fish community structure and composition shift could be attributed to anthropogenic (mismanagement) and natural climatic changes (warming). [ABSTRACT FROM AUTHOR]

Background: Primary immune thrombocytopenia (ITP) is an inflammatory autoimmune disease that can be managed with several treatment options. However, there is a lack of comparative data on the efficacy of these options in different phases of the disease. Aim of the study: This study aimed to evaluate the efficacy of high-dose Dexamethasone (HD-DXM), Prednisolone + Azathioprine, Rituximab, Eltrombopag, and Romiplostim schedules in persistent, chronic refractory or relapsed Egyptian ITP patients with a platelet count ≤30 × 109/L. The primary outcome measure was a sustained increase in platelet counts over 50 × 109/L for an additional 12 months without additional ITP regimens. The study also aimed to identify a suitable treatment regimen with a long remission duration for each phase of ITP. Results: Prednisolone + Azathioprine was significantly more effective in achieving an overall response in persistent patients than Romiplostim, high-dose Dexamethasone, and Rituximab. (90.9% vs. 66.6, [Odds ratio, OR: 5; confidence interval, CI 95% (0.866–28.86)], 45%, [OR: 0.082, CI 95% (0.015–0.448)] and, 25%, [OR: 30, CI 95% (4.24–211.8)], respectively, p-value < 0.01). Eltrombopag was significantly more effective in achieving a durable response in refractory ITP than HD-DXM, Rituximab, and Prednisolone; (80% compared to 32.2% [OR: 0.119, CI 95% (0.035–0.410)], 22.2% [OR:0.071, CI 95% (0.011–0.455)], and 18.1% [OR: 0.056, CI 95% (0.009–0.342)], respectively, p-value < 0.01). Conclusions: Finally, Eltrombopag following HD-DXM showed the highest percentage of patients with complete treatment-free survival times of at least 330 days. These findings could help clinicians choose the most appropriate treatment for their patients with ITP based on the phase of the disease. This trial is registered in clinicaltrials.gov with registration number NCT05861297. [ABSTRACT FROM AUTHOR]

Immune thrombocytopenia (ITP) is an autoimmune bleeding disorder caused by antigen-specific T cells and antiplatelet autoantibodies that inhibit platelet production in the bone marrow or destroy platelets in the spleen. ITP is a form of autoimmunity and is closely associated with inflammation. Corticosteroids are the first-line therapy for ITP, with a total response rate of 53–80%. However, corticosteroid therapy is associated with significant side effects and is often ineffective in patients with corticosteroid-resistant or -intolerant disease. Eltrombopag has been validated as a second-line option in ITP therapy. Despite several studies demonstrating the efficacy and safety of Eltrombopag in immune thrombocytopenia patients, the prevalence of Eltrombopag-induced acute kidney injury has been observed. This case report describes a patient who experienced acute kidney injury during Eltrombopag therapy. A sudden increase in serum creatinine to 6.7 mg/dL and metabolic acidosis occurred after eight weeks of Eltrombopag. The patient's renal failure had worsened, proteinuria was detected, and emergency hemodialysis was initiated. With vigilant kidney function screening and prompt treatment, the patient's renal function improved remarkably following cessation of Eltrombopag and initiation of hemodialysis. This case highlights the importance of comprehensive medication history-taking and vigilant kidney function screening in patients receiving Eltrombopag. [ABSTRACT FROM AUTHOR]

Immune thrombocytopenia (ITP) treatment has evolved recently. However, none of the treatments have only benefits without drawbacks. This study aimed to compare the clinical outcomes and adverse drug patterns of Eltrombopag, Romiplostim, Prednisolone + Azathioprine, High Dose-dexamethasone (HD-DXM) (control group), and Rituximab in primary ITP Egyptian patients. All patients were initiated with corticosteroids, HD-DXM, as a first-line treatment for the first month immediately following diagnosis. Four hundred sixty-seven ITP patients were randomly assigned to five groups. The outcome measures were judged at baseline, at the end of treatment (6 months), and after an additional 6-month free treatment period. The follow-up period for which relapse is noted was 6 months after the end of treatment. Eltrombopag and Romiplostim resulted in a significantly higher incidence of sustained response than Rituximab, HD-DXM, and Prednisolone + Azathioprine (55.2% and 50.6% vs. 29.2%, 29.1%, and 18%, respectively; p-value < 0.001). More patients on immunomodulators (Prednisolone+ Azathioprine, HD-DXM, and Rituximab) relapsed than those on Romiplostim and Eltrombopag (81.9%, 70.8%, and 70.7% vs. 49.3%, and 44.7%, respectively; p-value < 0.01). We also describe 23 reports of pulmonary hypertension with Prednisolone+ Azathioprine and 13 reports with HD-DXM. The thrombotic events occurred in 16.6% and 13% of patients who received Eltrombopag and Romiplostim treatment, respectively. Most patients had at least one or two risk factors (92.8% of cases). Corticosteroids are effective first-line therapy in primary ITP patients. However, relapse is frequent. Eltrombopag and Romiplostim are safer and more effective than Prednisolone, HD-DXM, and Rituximab. They might be reasonable beneficial options after a one-month HD-DXM regimen. [ABSTRACT FROM AUTHOR]

A multifunctional nano-films of cellulose acetate (CA)/magnesium ortho-vanadate (MOV)/magnesium oxide/graphene oxide wound coverage was fabricated. Through fabrication, different weights of the previously mentioned ingredients were selected to receive a certain morphological appearance. The composition was confirmed by XRD, FTIR, and EDX techniques. SEM micrograph of Mg3(VO4)2/MgO/GO@CA film depicted that there was a porous surface with flattened rounded MgO grains with an average size of 0.31 µm was observed. Regarding wettability, the binary composition of Mg3(VO4)2@CA occupied the lowest contact angle of 30.15 ± 0.8o, while pure CA represents the highest one at 47.35 ± 0.4°. The cell viability % amongst the usage of 4.9 µg/mL of Mg3(VO4)2/MgO/GO@CA is 95.77 ± 3.2%, while 2.4 µg/mL showed 101.54 ± 2.9%. The higher concentration of 5000 µg/mL exhibited a viability of 19.23%. According to optical results, the refractive index jumped from 1.73 for CA to 1.81 for Mg3(VO4)2/MgO/GO@CA film. The thermogravimetric analysis showed three main stages of degradation. The initial temperature started from room temperature to 289 °C with a weight loss of 13%. On the other hand, the second stage started from the final temperature of the first stage and end at 375 °C with a weight loss of 52%. Finally, the last stage was from 375 to 472 °C with 19% weight loss. The obtained results, such as high hydrophilic behavior, high cell viability, surface roughness, and porosity due to the addition of nanoparticles to the CA membrane, all played a significant role in enhancing the biocompatibility and biological activity of the CA membrane. The enhancements in the CA membrane suggest that it can be utilized in drug delivery and wound healing applications. [ABSTRACT FROM AUTHOR]

Wound dressings have been designed based on cellulose acetate encapsulated with different concentrations of chromium oxide (Cr2O3) and titanium oxide (TiO2) with/without graphene oxide (GO). This study comprises the structural, morphological, optical, thermal, and biological behavior of chromium oxide/titanium dioxide/graphene oxide-integrated cellulose acetate (CA) films. The CA-based film bond formation was introduced by functional group analysis via Fourier transform infrared (FTIR) spectroscopy. The fabricated Cr2O3/TiO2/GO@CA film SEM micrographs demonstrate transition metal oxides Cr2O3 and TiO2 on a nano-scale. The TiO2@CA shows the lowest contact angle with 30°. Optically, the refractive index increases from 1.76 for CA to 2.14 for the TiO2@CA film. Moreover, normal lung cells (A138) growth examination in a function of Cr2O3/TiO2/GO@CA film concentration is conducted, introducing 93.46% with the usage of 4.9 µg/mL. The resulting data showed a promising wound-healing behavior of the CA-based films. [ABSTRACT FROM AUTHOR]

A new heterocyclic azo dye ligand (L) was synthesized by the combination of 4-amino antipyrine with 4-aminophenol. The new Cr(III), Mn(II), Fe(III), Co(II), Ni(II), Cu(II), Zn(II), and Cd(II) complexes were synthesized in excellent yields. The metal chelate structures were elucidated using elemental analyses, FT-IR, 1H-NMR, mass, magnetic moment, diffused reflectance spectral and thermal analysis (TG-DTG), and molar conductivity measurement. According to the FT-IR study, the azo dye ligand exhibited neutral tri-dentate behavior, binding to the metal ions with the azo N, carbonyl O, and protonated phenolic OH. The 1H-NMR spectral study of the Zn(II) complex supported the coordination of the zo dye ligand without proton displacement of the phenolic OH. Diffused reflectance and magnetic moment studies revealed the octahedral geometry of the complexes, as well as their good electrolytic nature, excepting the Zn(II) and Cd(II) complexes, which were nonelectrolytes, as deduced from the molar conductivity study. The theoretical calculations of optimized HOMO–LUMO energies, geometrical parameters, electronic spectra, natural atomic charges, 3D-plots of MEP, and vibrational wavenumbers were computed and elucidated using LANL2DZ and 6-311G (d, p) basis sets of density functional theory (DFT) with the approach of B3LYP DFT and TD-DFT methods. The ligand and complexes have been assayed for their antimicrobial activity and compared with the standard drugs. Most of the complexes have manifested excellent antimicrobial activity against various microbial strains. A molecular docking investigation was also performed, to acquire more information about the binding mode and energy of the ligand and its metal complexes to the Escherichia coli receptor using molecular docking. Altogether, the newly created ligand and complexes showed positive antibacterial effects and are worth future study. [ABSTRACT FROM AUTHOR]

During recent decades, the complexation of organic ligands toward several metal ions of s-p and d-block has been applied as a plan to enhance its antioxidant performance. Due to their wide range of beneficial impacts, coordination compounds are widely used in industries, specifically in the medicinal and pharmaceutical fields. The activity is generally improved by chelation consequently knowing that the characteristics of both ligands and metals can lead to the development of greatly active compounds. Chelation compounds are a substitute for using the traditional synthetic antioxidants, because metal chelates present benefits, including a variety in geometry, oxidation states, and coordination number, that assist and favor the redox methods associated with antioxidant action. As well as understanding the best studied anti-oxidative assets of these compounds, coordination compounds are involved in the free radical scavenging process and protecting human organisms from the opposing effects of these radicals. The antioxidant ability can be assessed by various interrelated systems. The methodological modification offers the most knowledge on the antioxidant property of metal chelates. Colorimetric techniques are the most used, though electron paramagnetic resonance (EPR) is an alternative for metallic compounds, since color does not affect the results. Information about systems, with their benefits, and restrictions, permits a dependable valuation of the antioxidant performance of coordination compounds, as well as assisting application in various states wherever antioxidant drugs are required, such as in food protection, appropriate good-packaged foods, dietary supplements, and others. Because of the new exhaustive analysis of organic ligands, it has become a separate field of research in chemistry. The present investigation will be respected for providing a foundation for the antioxidant properties of organic ligands, future tests on organic ligands, and building high-quality antioxidative compounds. [ABSTRACT FROM AUTHOR]

A new series of Schiff–benzimidazole hybrids 3a–o has been designed and synthesized. The structure of the target compounds was proved by different spectroscopic and elemental analysis tools. The target compounds were evaluated for their in vitro cytotoxic activity against 60 cancer cell lines according to NCI single- and five-dose protocols. Consequently, four compounds were further examined against the most sensitive lung cancer A549 and NCI-H460 cell lines. Compounds 3e and 3g were the most active, achieving 3.58 ± 0.53, 1.71 ± 0.17 and 1.88 ± 0.35, 0.85 ± 0.24 against A549 and NCI-H460 cell lines, respectively. Moreover, they showed remarkable inhibitory activity on the VEGFR-2 TK with 86.23 and 89.89%, respectively, as compared with Sorafenib (88.17%). Moreover, cell cycle analysis of NCI-H460 cells treated with 3e and 3g showed cellular cycle arrest at both G1 and S phases (supported by caspases-9 study) with significant pro-apoptotic activity, as indicated by annexin V-FITC staining. The binding interactions of these compounds were confirmed through molecular docking studies; the most active compounds displayed complete overlay with, and a similar binding mode and pose to, Sorafenib, a reference VEGFR-2 inhibitor. [ABSTRACT FROM AUTHOR]

For wound healing, functional films with certain physicochemical and biological properties are needed. Thus, the current work aimed to fabricate multifunctional materials comprising metal oxide nanoparticles loaded with an efficient polymer to be used as dressing material. A composite containing polymeric phases of cellulose acetate (CA) blended with zinc sulfide (ZnS), silver oxide (Ag2O), and graphene oxide (GO) was successfully synthesized. The prepared composite crystallinity was studied using the X-ray diffraction technique (XRD). Further, the functional groups and the elemental analysis were investigated using Fourier-transform infrared spectroscopy (FTIR) and energy-dispersive X-ray spectroscopy (EDX). Furthermore, the surface morphology was studied using scanning electron microscopy (SEM) to obtain the shape and size of particles. SEM showed that the particles were formed in wide distribution in the range of 18–915 nm with an average size of 235 nm for Ag2O/ZnS/GO/CA. The particle size of Ag2O in the CA film was in the range between 19 and 648 nm with an average size of 216 nm, while the particle size of ZnS in CA was in the range of 12–991 nm with an average age particle size of 158 mm. In addition, EDX, based on SEM investigation, detected high carbon and oxygen quantities at around 94.21% of the composite. The contact angle decreased and reached 26.28° ± 2.12° in Ag2O/ZnS/CA. Furthermore, thermogravimetric analysis (TGA) was used to investigate the thermal stability, and the composition was thermally stable until 300 °C. Moreover, the cell viability of "normal lung cells" reached 102.66% in vitro at a concentration of 1250 µg/mL. The antibacterial activity of Ag2O/ZnS/GO/CA was also detected against E. coli with a zone of inhibition reaching 17.7 ± 0.5 mm. Therefore, the composite can be used in biomedical applications due to its biocompatibility and antibacterial activity. [ABSTRACT FROM AUTHOR]

Through the condensation of isatin (indoline-2, 3-dione) and aniline in a 1:1 ratio, a Schiff base ligand was synthesized and characterized via (1H-NMR, mass, IR, UV-Vis) spectra. Elemental analyses, spectroscopy (1H-NMR, mass, UV-Vis), magnetic susceptibility, molar conductivity, mass spectra, scanning electron microscope (SEM), and thermal analysis have all been used to characterize a series of Cr(III), Mn(II), Fe(III), Co(II), Ni(II), Cu(II), Zn(II), and Cd(II) metal complexes derived from the titled ligand. The metal-to-ligand ratio is 1:1, according to the analytical data. The Schiff base ligand displayed bidentate behavior with NO coordination sites when it bonded to metal ions, as seen by the IR spectra. The magnetic moment measurement and UV-Vis spectral investigation showed the octahedral geometry of the Cr(III), Fe(III), Co(II), Ni(II), and Zn(II) complexes, whereas they suggested the tetrahedral geometry of the Mn(II), Cu(II), and Cd(II) complexes. The thermal analysis study confirmed the presence of both hydrated and coordinated water molecules in all the compounds, except for the Mn(II) complex, and showed that the complexes decomposed in three or five decomposition steps leaving the corresponding metal oxide as a residue. The ligand and its metal complexes' antibacterial efficacy were evaluated. The findings showed that the metal complexes had stronger antibacterial properties than the ligand alone. The ligand and its metal complexes' anticancer properties were also investigated. A DFT investigation is also reported to gather information regarding the electronic features of the ligand and its metal complexes. Finally, drug-likeness and ADME characteristics were also calculated as parameters. [ABSTRACT FROM AUTHOR]

In the current work, chitosan (CS)–metal oxide nanohybrid (MONH) composites are prepared via combining CS with MONH made of vanadium oxide (V2O5), ytterbium trioxide (Yb2O3), and graphene oxide (GO) to generate promising wound dressing materials using the film-casting method. The developed nanohybrid@CS was examined using techniques such as Fourier-transform infrared spectroscopy (FTIR), X-ray powder diffraction (XRD), scanning electron microscopy (SEM)/energy-dispersive X-ray spectroscopy (EDX), and thermogravimetric analysis (TGA). For Yb2O3@CS, the surface morphology was shown to be a rough and porous surface with pores that ranged in size from 3.0 to 5.0 µm. For CS with Yb2O3, Yb2O3/V2O5@CS, and Yb2O3/V2O5/GO@CS, the contact angles were 72.5°, 68.2°, and 46.5°, respectively. When the nanohybrid@CS was in its hydrophilic phase, which is good for absorbing moisture and drugs, there was a notable decrease in angles that tended to rise. Additionally, the inclusion of MONH allowed the cell viability to be confirmed with an IC50 of 1997.2 g/mL and the cell growth to reach 111.3% at a concentration of 7.9 g/mL. [ABSTRACT FROM AUTHOR]

Mesenchymal stem cells (MSCs) are considered to be a promising therapeutic protocol for diabetes mellitus (DM) management. The latter is attributed to their differentiation potentiality to pancreatic β-cells, angiogenesis, and immune-modulatory capabilities by releasing various paracrine factors. Interestingly, antioxidant co-administration increased the MSCs' hypoglycemic and regenerative activities. Thus, this study aims to evaluate the therapeutic implication of type 1 DM after the co-administration of adipose tissue-derived-MSCs (AD-MSCs) and N,N′-d iphenyl-1,4-phenylenediamine (DPPD), compared to the single injection of either of them alone. In our four week long experiment, six rat groups were used as control, DPPD (250 mg/kg, i.p.), STZ-diabetic (D), D+DPPD, D+AD-MSCs (1 × 106 cell/rat, i.p.), and D+AD-MSCs+DPPD groups. Within this context, a single injection of AD-MSCs or DPPD into diabetic rats showed significant pancreatic anti-inflammatory, immunomodulation, antioxidant, and anti-apoptotic capacities, superior to AD-MSCs injection. However, AD-MSCs and DPPD co-administration into diabetic rats manifested the highest hypoglycemic and pancreatic regenerative activities in managing diabetes compared to the single shot of AD-MSCs or DPPD. These results highlight the synergetic role of DPPD as an antioxidant in enhancing AD-MSCs' therapeutic applications. [ABSTRACT FROM AUTHOR]

Novelmanganese(II), iron(III), cobalt(II), nickel(II), and copper(II) chelates were synthesized and studied using elemental analysis (EA), infrared spectroscopy, mass spectrometry, ultraviolet-visible spectroscopy, and conductivity, as well as magnetic measurements and thermogravimetric analysis (TG). The azo-ligand 1-[(4-nitrophenyl)diazenyl]-2-naphthol (HL) chelates to the metal ions via the nitrogen and oxygen centers of the azo group and the hydroxyl, respectively. The amounts of H2O present and its precise position were identified by thermal analysis. Density functional theory (DFT) was employed to theoretically elucidate the molecular structures of the ligand and the metal complexes. Furthermore, the quantum chemical parameters were also evaluated. The antimicrobial properties were evaluated against a group of fungal and bacterial microbes. Interestingly, the bioactivity of the complexes is enhanced compared to free ligands. Within this context, the CuL complex manifested the lowest activity, whereas the FeL complex had the greatest. Molecular docking was used to foretell the drugs' binding affinity for the structure of Escherichia coli (PDB ID: 1hnj). Protein-substrate interactions were resolved, and binding energies were accordingly calculated. [ABSTRACT FROM AUTHOR]

The aim of this work is to introduce the novel concept of an m-polar fuzzy soft set, including various types of algorithms and their fundamental operations. We created mathematical modeling to analyze operational rules and discuss the advantages, disadvantages, and natural aspects of algorithms for six types of nuclear power plants. It has been determined that emerging trends and the benefits of algorithms are increasing step by step. The suggested modeling with an m-polar fuzzy soft set is integrated into the fuzzy mean environment to analyze the effect of the correlation between decision factors and decision results without an excessive duty cycle, thus minimizing energy use and other adverse effects. Based on a new group decision-making technique considering an asymmetric weight vector, we proved that Gas Cooled, Graphite-Moderated, and Pressurized Water Reactors are the optimal choices for nuclear power plants. In the end, a numerical illustration is provided for selecting the best photo to demonstrate the use of the generated technique and to exhibit its adequacy. [ABSTRACT FROM AUTHOR]

The development of scaffold-based nanofilms for the acceleration of wound healing and for maintaining the high level of the healthcare system is still a challenge. The use of naturally sourced polymers as binders to deliver nanoparticles to sites of injury has been highly suggested. To this end, chitosan (CS) was embedded with different nanoparticles and examined for its potential usage in wound dressing. In detail, chitosan (CS)-containing zinc sulfide (ZnS)/zirconium dioxide (ZrO2)/graphene oxide (GO) nanocomposite films were successfully fabricated with the aim of achieving promising biological behavior in the wound healing process. Morphological examination by SEM showed the formation of porous films with a good scattering of ZnS and ZrO2 nanograins, especially amongst ZnS/ZrO2/GO@CS film. In addition, ZnS/ZrO2/GO@CS displayed the lowest contact angle of 67.1 ± 0.9°. Optically, the absorption edge records 2.35 eV for pure chitosan, while it declines to 1.8:1.9 scope with the addition of ZnS, ZrO2, and GO. Normal lung cell (WI-38) proliferation inspection demonstrated that the usage of 2.4 µg/mL ZnS/ZrO2/GO@CS led to a cell viability % of 142.79%, while the usage of 5000 µg/ mL led to a viability of 113.82%. However, the fibroblast malignant cell line exposed to 2.4 µg/mL ZnS/ZrO2/GO@CS showed a viability % of 92.81%, while this percentage showed a steep decline with the usage of 5000 µg/ mL and 2500 µg/mL, reaching 23.28% and 27.81%, respectively. Further biological assessment should be executed with a three-dimensional film scaffold by choosing surrounding media characteristics (normal/malignant) that enhance the selectivity potential. The fabricated scaffolds show promising selective performance, biologically. [ABSTRACT FROM AUTHOR]

The development of wound dressing materials with appropriate specifications is still a challenge to overcome the current limitations of conventional medical bandages. In this regard, simple and fast methods are highly recommended, such as film casting. In addition, deliverable nanoparticles that can act to accelerate wound integration, such as samarium oxide (Sm2O3) and magnesium oxide (MgO), might represent a potential design with a novel compositional combination. In the present research, the casted film of cellulose acetate (CA) was mixed with different ratios of metal oxides, such as samarium oxide (Sm2O3) and magnesium oxide (MgO). The tests used for the film examination were X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM). The SEM graphs of CA films represent the surface morphology of Sm2O3@CA, MgO@CA, and Sm2O3/MgO/GO@CA. It was found that the scaffolds' surface contained a high porosity ratio with diameters of 1.5–5 µm. On the other hand, the measurement of contact angle exhibits a variable trend starting from 27° to 29° for pristine CA and Sm2O3/MgO/GO@CA. The cell viability test exhibits a noticeable increase in cell growth with a decrease in the concentration. In addition, the IC50 was determined at 6 mg/mL, while the concentration of scaffolds of 20 mg/mL caused cellular growth to be around 106%. [ABSTRACT FROM AUTHOR]

In this work, the preparation, characterization, and evaluation of a novel nanocomposite using polyaniline (PANi) functionalized bi-metal oxide ZnO-TiO2 (ZnTiO@PANi) as shielding film for carbon steel (CS)-alloy in acidic chloride solution at 298 K was studied. Different spectroscopic characterization techniques, such as UV-visible spectroscopy, dynamic light scattering (DLS), X-ray photoelectron spectroscopy (XPS), and Fourier transform infrared spectroscopy (FTIR) approaches, as well as other physicochemical methods, such as X-ray diffraction (XRD), high-resolution transmission electron microscopy (HR-TEM), and field emission scanning electron microscope (FESEM), were used to describe the produced nanocomposites. The significance of these films lies in the ZnO-TiO2 nanoparticle's functionalization by polyaniline, a material with high conductivity and electrochemical stability in acidic solutions. The mechanistic findings of the corrosion inhibition method were obtained by the use of electrochemical methods including open-circuit potentials (OCP) vs. time, potentiodynamic polarization (PDP), and electrochemical impedance spectroscopy (EIS). The results indicate that the synthesized ZnTiO@PANi is a powerful acidic corrosion inhibitor, and its inhibition effectiveness is 98.86% in the presence of 100 ppm. Additionally, the charge transfer resistance (Rp) value augmented from 51.8 to 432.7, and 963.7 Ω cm2 when the dose of PANi, and ZnTiO@PANi reached 100 ppm, respectively. The improvement in Rp and inhibition capacity values with an increase in nanocomposite dose is produced by the nanocomposite additives covering a larger portion of the surface, resulting in a decrease in alloy corrosion. By identifying the probable regions for molecule adsorption on the steel substrate, theoretical and computational studies provided significant details regarding the corrosion mitigation mechanism. The possibility of substituting old poisonous small substances with inexpensive and non-hazardous polymeric materials as shielding layers for utilization in the oilfield sectors is an important suggestion made by this research. [ABSTRACT FROM AUTHOR]

Due to their thermal stability characteristics, polymer/composite materials have typically been employed as corrosion inhibitors in a variety of industries, including the maritime, oil, and engineering sectors. Herein, protective films based on binary ZnO-NiO@polyaniline (ZnNiO@PANE) nanocomposite were intended with a respectable yield. The produced nanocomposite was described using a variety of spectroscopic characterization methods, including dynamic light scattering (DLS), ultraviolet–visible spectroscopy (UV-Vis), Fourier-transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS) approaches, in addition to other physicochemical methods, including X-ray powder diffraction (XRD), transmission Electron Microscopy (TEM), field emission scanning electron microscopy (FESEM), and selected area electron diffraction (SAED). By using open-circuit potentials (OCP) vs. time, electrochemical impedance spectroscopic (EIS), and potentiodynamic polarization (PDP) methods, the inhibitory effects of individual PANE and ZnNiO@PANE on the mild steel alloy corrosion in HCl/NaCl solution were assessed. The ZnNiO@PANE composite performed as mixed-type inhibitors, according to PDP findings. PANE polymer and ZnNiO@PANE composite at an optimal dose of 200 mg/L each produced protective abilities of 84.64% and 97.89%, respectively. The Langmuir isotherm model is used to explain the adsorption of ZnNiO@PANE onto MS alloy. DFT calculations showed that the prepared materials' efficiency accurately reflects their ability to contribute electrons, whereas Monte Carlo (MC) simulations showed that the suitability and extent of adsorption of the ZnNiO@PANE molecule at the metal interface determine the materials' corrosion protection process. [ABSTRACT FROM AUTHOR]

Climate change impacts represent one of the most important ecological and medical issues during this century. Several fungal species will change their distribution through space and time as a response to climate changes. This will rearrange many fungal diseases throughout the world. One of the most important and very common fungi is the black mold Aspergillus niger. The COVID-19 pandemic reforms the way in which mycologists think about this fungus as an emerging healthy issue. Through this work, about one thousand records of Aspergillus niger were used to model its current and future global distribution using 19 bioclimatic variables under several climate change scenarios. Maximum entropy implemented in Maxent was chosen as the modeling tool, especially with its accuracy and reliability over the other modeling techniques. The annual mean temperature (bio 1) forms the most contributed climatological parameter to black mold distribution. The produced current distribution model came compatible with the real distribution of the species with a cosmopolitan range. The rise of temperature due to global warming will form a limitation to Aspergillus niger through several parts of its range. The generated maps of the future status of this fungus under two different RCPs for 2050 and 2070, indicate several parts that become free from black mold due to temperature limitations. The present results need more intensive future evaluation using data science and GIS, especially on a local scale including more ecological parameters other than climatological data. [ABSTRACT FROM AUTHOR]

In this study, pumice is used as a novel natural heterogeneous catalyst for the synthesis of 3,4-dihydropyrimidine-2-(1H)-ones/thiones via the one-pot multi-component condensation of aromatic aldehydes, urea/thiourea, and ethyl acetoacetate or acetylacetone in excellent yields (up to 98%). The physical and chemical properties of the catalyst were studied. Their geochemical analysis revealed a basaltic composition. Furthermore, X-ray diffraction showed that it is composed of amorphous materials with clinoptilolite and heulandites zeolite minerals in its pores. Moreover, pumice has a porosity range from 78.2–83.9% (by volume) and is characterized by a mesoporous structure (pore size range from 21.1 to 64.5 nm). Additionally, it has a pore volume between 0.00531 and 0.00781 m2/g and a surface area between 0.053 and 1.47 m2/g. The latter facilitated the reaction to proceed in a short time frame as well as in excellent yields. It is worth noting that our strategy tolerates the use of readily available, cheap, non-toxic, and thermally stable pumice catalyst. The reactions proceeded smoothly under solvent-free conditions, and products were isolated without tedious workup procedures in good yields and high purity. Indeed, pumice can be reused for at least five reuse cycles without affecting its activity. [ABSTRACT FROM AUTHOR]

A novel drug delivery system based on carboxymethyl cellulose containing copper oxide at melamine and zinc oxide at melamine framework (CMC-Cu-MEL and CMC-Zn-MEL) was prepared by the hydrothermal route. Synthesized nanocomposites were characterized by FTIR, SEM, and Raman spectroscopy. In addition, transmission electron microscopy (TEM) and selected area electron diffraction (SAED) images were applied to confirm the particle size and diffraction pattern of the prepared nanocomposites. Furthermore, the crystallinity of the synthesized CMC, CMC-Cu-MEL, and CMC-Zn-MEL materials was studied via X-ray diffraction (XRD). Estimating the transport exponent, which discloses the solvent diffusion and chain relaxation processes, and the Ritger–Peppas kinetic model theory were used to control the TC release mechanism from CMC-Cu-MEL and CMC-Zn-MEL. Additionally, the CMC-Cu-MEL and CMC-Zn-MEL containing TC had the highest activity index percents of 99 and 106% against S. aureus and 93 and 99% against E. coli, respectively. The tailored CMC-Cu-MEL and CMC-Zn-MEL for drug delivery systems are expected to be feasible and efficient. [ABSTRACT FROM AUTHOR]

This work investigates an electrochemical impedance analysis based on synthesized TiO2 nanofibers (NFs) photoanodes, which were fabricated via electrospinning and calcination. The investigated photoanode substrate NFs were studied in terms of physicochemical tools to investigate their morphological character, crystallinity, and chemical contents via scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS), and X-ray diffraction (XRD) analyses. As a result, the studied photoanode substrate NFs were applied to fabricate dye-sensitized solar cells (DSCs), and the electrochemical impedance analysis (EIS) was studied in terms of equivalent circuit fitting and impacts of N-doping, the latter of which was approved via XPS analysis. N-doping has a considerable role in the enhancement of charge transfers, which could be due to the strong interactions between active-site N atoms and the used photosensitizer. [ABSTRACT FROM AUTHOR]

The corrosion inhibition of transition metal chelates derived from Schiff base ligands was tested for (mild, copper, stainless, aluminum and carbon) steel in various concentrations of (HCl, HNO3 and H2SO4) acidic medium at 25 °C through (weight loss, potentiodynamic polarization, polarization curves, electrochemical impedance spectroscopy (EIS) and open circuit potential measurements (OCP)) techniques. The studied compounds were identified with various spectral, analytical and physico-chemical techniques. It was observed that the investigated compounds had a significant inhibitory impact on the corrosion of diverse steels in the medium investigated. The analysis shows that increasing the dose of the studied complexes improves the corresponding inhibitory efficiency values. Negative results of Gibb's free adsorption energy ( Δ G a d s 0 ) prove the suppression process's spontaneous and physical adsorption, which contradicts the Langmuir adsorption isotherm. As a result of this insight, a novel bridge between nuclearity driven coordinated inorganic chemistry and materials, as well as corrosion control, has been built. This review provides an overview of the use of Schiff bases and associated transition metals as potential corrosion inhibitors, including the factors that influence their application. [ABSTRACT FROM AUTHOR]

Corrosion is considered to be the most severe problem facing alloys and metals, one that causes potentially dangerous industrial issues such as the deterioration of buildings and machinery, and corrosion in factory tanks and pipelines in petroleum refineries, leading to limited lifetime and weak efficacy of such systems. In this work, novel CeO2-nanoparticle-loaded carboxymethyl cellulose (CMC) was successfully prepared by using a simple method. The structural configuration of the prepared CeO2-nanoparticle-loaded CMC was investigated by FE-SEM/EDX, TEM, FT-IR, and thermal analyses. The corrosion protection proficiency of uncoated and coated mild steel with CeO2-CMC systems in 1.0 M HCl solutions was studied by EOCP-time, EIS, and PDP tools. Moreover, the relationship between the structure of coating films and their corrosion protection was confirmed by DFT calculation and MC simulation. The obtained findings from the studied methods showed that the prepared CeO2-CMC-coated films reported high corrosion resistance. The protection capacity augmented with ceria presents an increase of up to 3% to achieve 98.4%. DFT calculation and MC simulation confirmed the influence of the chemical construction of coated films on its protection capacity, which was in accordance with the experimental results. [ABSTRACT FROM AUTHOR]

The presence of nitrates in water in large amounts is one of the most dangerous health issues. The greatest risk posed by nitrates is hemoglobin oxidation, which results in Methemoglobin in the human body, resulting in Methemoglobinemia. There are many ways to eliminate nitrates from underground water. One of the most effective and selective methods is using zero-valent iron (ZVI) nanoparticles. ZVI nanoparticles can be easily synthesized by reducing ferric or ferrous ions using sodium borohydride. The prepared ZVI nanoparticles were examined by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), electron microscopy (TEM), X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET) surface area, and zeta potential. We aim to eliminate or reduce the nitrates in water to be at the acceptable range, according to the world health organization (WHO), of 10.0 mg/L. Nitrate concentration in water after and before treatment is measured using the UV scanning method at 220 nm wavelength for the synthetic contaminated water and electrochemical method for the naturally contaminated water. The conditions were optimized for obtaining an efficient removing process. The removal efficiency reaches about 91% at the optimized conditions. [ABSTRACT FROM AUTHOR]

Some novel imine metal chelates with Cr3+, Mn2+, Fe3+, Co2+, Ni2+, Cu2+, Zn2+, and Cd2+ cations were produced from 2-acetylferrocene and 3-aminophenol. The new acetylferrocene azomethine ligand ((Z)-cyclopenta-1,3-dien-1-yl(2-(1-((3-hydroxyphenyl)imino)ethyl)cyclopenta-2,4-dien-1-yl)iron) and its metal ion chelates were constructed and elucidated using FT-IR, UV/Vis, 1HNMR, DTA/TGA, CHNClM studies, mass spectrometry and SEM analysis. According to the TGA/DTG investigation, the ferrocene moiety spontaneously disintegrates to liberate FeO. The morphology of the free acetylferrocene azomethine via SEM analysis was net-shaped with a size of 64.73 nm, which differed in Cd(II) complex to be a spongy shape with a size of 42.43 nm. The quantum chemical features of the azomethine ligand (HL) were computed, and its electronic and molecular structure was refined theoretically. The investigated acetylferrocene imine ligand behaves as bidinetate ligand towards the cations under study to form octahedral geometries in case of all complexes except in case of Zn2+ is tetrahedral. Various microorganisms were used to investigate the anti-pathogenic effects of the free acetylferrocene azomethine ligand and its metal chelates. Moreover, the prepared ligand and its metal complexes were tested for anticancer activity utilizing four different concentrations against the human breast cancer cell line (MCF7) and the normal melanocyte cell line (HBF4). Furthermore, the binding of 3-aminophenol, 2-acetylferrocene, HL, Mn2+, Cu2+, and Cd2+ metal chelates to the receptor of breast cancer mutant oxidoreductase was discovered using molecular docking (PDB ID: 3HB5). [ABSTRACT FROM AUTHOR]

An eco-friendly and a facile route successfully prepared novel cerium oxide nanoparticles functionalized by gelatin. The introduced CeO2@gelatin was investigated in terms of FE-SEM, EDX, TEM, chemical mapping, FT-IR, and (TGA) thermal analyses. These characterization tools indicate the successful synthesis of a material having CeO2 and gelatin as a composite material. The prepared composite CeO2@gelatin was used as an environment-friendly coated film or X60 steel alloys in acidizing oil well medium. Moreover, the effect of CeO2 percent on film composition was investigated. LPR corrosion rate, Eocp-time, EIS, and PDP tools determined the corrosion protection capacity. The CeO2@gelatin composite exhibited high protection capacity compared to pure gelatin; in particular, 5.0% CeO2@gelatin coating film shows the highest protection capacity (98.2%), with long-term anti-corrosive features. The % CeO2@gelatin-coated films formed the protective adsorbed layer on the steel interface by developing a strong bond among nitrogen atoms in the CeO2@gelatin film and the electrode interface. Surface morphology using FESEM measurements confirmed the high efficiency of the fabricated CeO2@gelatin composite on the protection X60 steel alloys. DFT calculations and MC simulations were explored to study the relations between the protection action and the molecular construction of the coated systems, which were in good alignment with the empirical findings. [ABSTRACT FROM AUTHOR]

Coronavirus disease (SARS-CoV-2) is a global epidemic. This pandemic, which has been linked to high rates of death, has forced some countries throughout the world to implement complete lockdowns in order to contain the spread of infection. Because of the advent of new coronavirus variants, it is critical to find effective treatments and vaccines to prevent the virus's rapid spread over the world. In this regard, metal complexes have attained immense interest as antibody modifiers and antiviral therapies, and they have a lot of promise towards SARS-CoV-2 and their suggested mechanisms of action are discussed, i.e., a new series of metal complexes' medicinal vital role in treatment of specific proteins or SARS-CoV-2 are described. The structures of the obtained metal complexes were fully elucidated by different analytical and spectroscopic techniques also. Molecular docking and pharmacophore studies presented that most of complexes studied influenced good binding affinity to the main protease SARS-CoV-2, which also was attained as from the RCSB pdb (Protein Data Bank) data PDB ID: 6 W41, to expect the action of metal complexes in contradiction of COVID-19. Experimental research is required to determine the pharmacokinetics of most of the complexes analyzed for the treatment of SARS-CoV-2-related disease. Finally, the toxicity of a metal-containing inorganic complex will thus be discussed by its capability to transfer metals which may bind with targeted site. [ABSTRACT FROM AUTHOR]

The one-pot multicomponent synthetic strategy of organoselenium compounds represents an alternative and robust protocol to the conventional multistep methods. During the last decade, a potential advance has been made in this domain. This review discusses the latest advances in the polymerization, metal, and metal-free one-pot multicomponent synthesis of organoselenium compounds. [ABSTRACT FROM AUTHOR]

The newly synthesized organometallic acetyl ferrocene imine ligand (HL) was obtained by the direct combination of 2-acetyl ferrocene with 2-aminothiophenol. The electronic and molecular structure of acetyl ferrocene imine ligand (HL) was refined theoretically and the chemical quantum factors were computed. Complexes of the acetyl ferrocene imine ligand with metal(II)/(III) ions (Cr(III), Mn(II), Fe(III), Co(II), Ni(II), Cu(II), Zn(II) and Cd(II)) were fabricated. They were inspected by thermal (DTG/TG), spectroscopic techniques (FT-IR, 1H NMR, mass, UV–Vis), molar conductivity, and CHNClM to explicate their structures. Studies using scanning electron microscope (SEM) were conducted on the free acetyl ferrocene imine ligand and its Cd(II) chelate to confirm their nano-structure. To collect an idea about the effect of metal ions on anti-pathogenic properties upon chelation, the newly synthesized acetyl ferrocene imine ligand and some of its metal chelates were tested against a variety of microorganisms, including Bacillus subtilis, Staphylococcus aureus, Salmonella typhimurium, Escherichia coli, Aspergillus fumigatus, and Candida albicans. The ligand and its metal chelate were tested for cytotoxic activity in human cancer (MCF-7 cell viability) and human melanocyte cell line HBF4. It was discovered that the Cd(II) chelate had the lowest IC50 of the three and thus had the prior activity. Molecular docking was utilized to investigate the interaction of acetyl ferrocene imine ligand (HL) with the receptors of the vascular endothelial growth factor receptor VEGFR (PDB ID: 1Y6a), human Topo IIA-bound G-segment DNA crystal structure (PDB ID: 2RGR), and Escherichia coli crystal structure (PDB ID: 3T88). [ABSTRACT FROM AUTHOR]

A novel drug delivery system based on chitosan nanofibers containing some steroidal derivatives was developed using an electrospinning process. Oxazolines and aziridines from the cholestane series of steroidal epoxides were successfully synthesized and characterized by elemental analysis, Fourier transforms infrared spectroscopy (FTIR), proton nuclear magnetic resonance (1HNMR), and mass spectroscopy (MS). Steroidal-compound-loaded chitosan (ST-CH) nanofibers were fabricated using the electrospinning technique in the presence of polyvinylpyrrolidone (CH/PVP). The electrospun nanofibers were characterized by scanning electron microscopy (SEM). The swelling degree of the electrospun nanofibers and their steroidal compound release performance were studied as well. Furthermore, their antibacterial activity against gram-positive (Staphylococcus aurous) and gram-negative bacteria (Escherichia coli) was evaluated. The experimental data revealed that identical and bead-free nanofiber mats loaded with 10 Wt. % of synthesized steroidal derivatives had been obtained. The FTIR spectrum proved that no change occurred in the chitosan structure during the electrospinning process. The synthesized nanofiber mats showed a high swelling degree and a burst release of steroidal compounds after 2 h doping in phosphate buffer saline. In addition, the electrospun nanofibers containing 3β-chloro-N-amido-5α-cholestano-aziridine and those containing 3β-acetoxy-N-amido-5α-cholestano-aziridine were the most active, with activity indices of 91 and 104% in the case of S. aureus and 52% and 61% in the case of E. coli, respectively. The release mechanism by CH/PVP of the drug samples was studied based on the charge density and diffusion controlled factors. The oxazoline derivatives release mechanism from CH/PVP was evaluated by applying the suppositions of the Ritger-Peppas kinetic model and by estimating the transport exponent; the latter revealed the involvement of the solvent diffusion and chain relaxation processes. Tailored steroidal loaded-chitosan (ST-CH) nanofibers are expected to be feasible and efficient drug delivery systems. [ABSTRACT FROM AUTHOR]

A novel adsorbent substrate based on zero-valent iron in activated carbon (Fe(0)@AC) was introduced in this work, and was evaluated as a cheap adsorbent for the removal of Cr(VI) from aqueous solutions. The as-prepared Fe(0)@AC material was chemically prepared via NaBH4 reduction in the presence of ferric chloride as an iron source, followed by the addition of powdered activated carbon. The different physicochemical tools confirm the successful preparation of Fe(0) composite with activated carbon as a heterogeneous composite with heterogeneous morphology of the rock-shape structure, which could play a role in the metal adsorption application. Interestingly, the removal efficiency (RE) of Cr(VI) was increased from 52% to 84% due to the Fe(0)@AC adsorbent being changed from 0.2 to 0.4 g/100 mL. Following this, the increase rate was stabilized, and the RE reached 95% in the case of 0.8 g/100 mL from Fe(0)@AC adsorbent. This result could be due to the increase in the sorbent active sites with more contents from Fe(0)@AC. The adsorption model based on the Langmuir approach could successfully describe the experimental outcomes for Cr(VI) removal by Fe(0)@AC with the correlation coefficient of 0.977. To conclude, Fe(0)@AC heterogeneous material is an active adsorbent for Cr(VI) removal from aqueous solutions. [ABSTRACT FROM AUTHOR]

Drinking water containing nitrate ions at a higher concentration level of more than 10 mg/L, according to the World Health Organization (WHO), poses a considerable peril to humans. This danger lies in its reduction of nitrite ions. These ions cause methemoglobinemia during the oxidation of hemoglobin into methemoglobin. Many protocols can be applied to the remediation of nitrate ions from hydra solutions such as Zn metal and amino sulfonic acid. Furthermore, the electrochemical process is a potent protocol that is useful for this purpose. Designing varying parameters, such as the type of cathodic electrode (Sn, Al, Fe, Cu), the type of electrolyte, and its concentration, temperature, pH, and current density, can give the best conditions to eliminate the nitrate as a pollutant. Moreover, the use of accessible, functional, and inexpensive adsorbents such as granular ferric hydroxide, modified zeolite, rice chaff, chitosan, perlite, red mud, and activated carbon are considered a possible approach for nitrate removal. Additionally, biological denitrification is considered one of the most promising methodologies attributable to its outstanding performance. Among these powerful methods and materials exist zero-valent iron (ZVI), which is used effectively in the deletion process of nitrate ions. Non-precious synthesis pathways are utilized to reduce the Fe2+ or Fe3+ ions by borohydride to obtain ZVI. The structural and morphological characteristics of ZVI are elucidated using UV–Vis spectroscopy, zeta potential, XRD, FE-SEM, and TEM. The adsorptive properties are estimated through batch experiments, which are achieved to control the feasibility of ZVI as an adsorbent under the effects of Fe0 dose, concentration of NO3− ions, and pH. The obtained literature findings recommend that ZVI is an appropriate applicant adsorbent for the remediation of nitrate ions. [ABSTRACT FROM AUTHOR]

Two tetradentate dibasic chelating Schiff base iron (III) chelates were prepared from the reaction of 2,2′-((1E,1′E)-(1,2-phenylenebis(azanylylidene))bis(methanylylidene))bis(4-bromophenol) (PDBS) and 2,2′-((1E,1′E)-((4-chloro-1,2-phenylene)bis(azanylylidene))-bis(methanylylidene))bis(4-bromophenol) (CPBS) with Fe3+ ions. The prepared complexes were fully characterized with spectral and physicochemical tools such as IR, NMR, CHN analysis, TGA, UV-visible spectra, and magnetic moment measurements. Moreover, geometry optimizations for the synthesized ligands and complexes were conducted using the Gaussian09 program through the DFT approach, to find the best structures and key parameters. The prepared compounds were tested as antimicrobial agents against selected strains of bacteria and fungi. The results suggests that the CPBSFe complex has the highest activity, which is close to the reference. An MTT assay was used to screen the newly synthesized compounds against a variety of cell lines, including colon cancer cells, hepatic cellular carcinoma cells, and breast carcinoma cells. The results are expressed by IC50 value, in which the 48 µg/mL value of the CPBSFe complex indicates its success as a potential anticancer agent. The antioxidant behavior of the two imine chelates was studied by DPPH assay. All the tested imine complexes show potent antioxidant activity compared to the standard Vitamin C. Furthermore, the in vitro assay and the mechanism of binding and interaction efficiency of the tested samples with the receptor of COVID-19 core protease viral protein (PDB ID: 6lu7) and the receptor of Gram-negative bacteria (Escherichia coli, PDB ID: 1fj4) were investigated using molecular docking experiments. [ABSTRACT FROM AUTHOR]

Urinary catheters are commonly associated with urinary tract infections. This study aims to inhibit bacterial colonisation and biofilm of urinary tract catheters. Silicon catheter pieces were varnished with green silver nanoparticles (AgNPs) using Pistacia lentiscus mastic to prevent bacterial colonisation. Pomegranate rind extract was used to synthesize AgNPs. AgNPs were characterized by UV-Vis spectroscopy, X-ray crystallography, and transmission electron microscopy (TEM). Results obtained revealed that the size of most AgNPs ranged between 15–25 nm and they took crystallised metal and oxidised forms. The amounts of released silver ions from 1 cm pieces of catheters coated with AgNPs were estimated for five days and ranged between 10.82 and 4.8 µg. AgNPs coated catheters significantly inhibited the colonisation of catheters by antibiotic-resistant clinical Gram-positive (Staphylococcus epidermidis and Staphylococcus aureus) and Gram-negative (Escherichia coli, Klebsiella pneumoniae, Proteus mirabilis, and Pseudomonas aeruginosa) bacteria. AgNPs-varnish was more active against Gram-negative bacteria than Gram-positive bacteria. The significant inhibitory effect of coated catheters lasted for 72 h for both Gram-positive and Gram-negative bacteria. Varnishing catheters with AgNPs may help to prevent bacterial colonisation and infections. [ABSTRACT FROM AUTHOR]

Arsenite (As(III)) and Selenate (Se(VI)) are universally touted as extremely toxic oxyanions in natural and industrial water systems. Thus, the production of low-cost adsorbents that are scalable and toxic-free is of great importance today. In this work, a large-scale goethite nanorods (α-FeOOH NRs) is synthesized using a modified rapid hydrolysis method. The obtained powder is characterized using different multidisciplinary techniques. Accordingly, the results showed uniform and straight nanorods (length ~400 nm and diameter ~40 nm) resembling cigar-like morphology while the structure is confirmed to be of orthorhombic α-FeOOH phase. The potential application of this material to adsorb As (III) and Se (VI) ions in water is explored. In particular, for initial adsorbate concentrations (~500 µg/L), the removal efficiencies are found exceptional with α-FeOOH doses of 0.33 g/L and ~0.5 g/L for As (III) and Se (VI), respectively. Attractively, the adsorption capacities were estimated using trusted isotherms and then experimentally verified at ultimately high concentrations. Besides, a pH-controlled adsorption study showed that a pH of 5–8 is a favored range for higher ionic uptake, which meets the World Health Organization (WHO) benchmarks of drinking water. To conclude, the α-FeOOH NRs are potential adsorbent for the sustainable removal of toxin ions in water systems. [ABSTRACT FROM AUTHOR]

N-(4-((3-Methyl-1,4-dioxo-1,4-dihydronaphthalen-2-yl)selanyl)phenyl)acetamide (5), C19H15NO3Se, was prepared in two steps from 4,4′-diselanediyldianiline (3) via reduction and subsequent nucleophilic reaction with 2-methyl-3-bromo-1,4-naphthalenedione, followed by acetylation with acetic anhydride. The cytotoxicity was estimated against 158N and 158JP oligodendrocytes and the redox profile was also evaluated using different in vitro assays. The technique of single-crystal X-ray diffraction is used to confirm the structure of compound 5. The enantiopure 5 crystallizes in space group P21 with Flack parameter 0.017 (8), exhibiting a chiral layered absolute structure. Molecular structural studies showed that the crystal structure is foremost stabilized by N-H···O and relatively weak C-H···O contacts between molecules, and additionally stabilized by weak C-H···π and Se···N interactions. Hirshfeld surface analysis is used to quantitatively investigate the noncovalent interactions that stabilize crystal packing. Framework energy diagrams were used to graphically represent the stabilizing interaction energies for crystal packing. The analysis of the energy framework shows that the interactions energies of and C-H···π and C-O···π are primarily dispersive and are the crystal's main important forces. Density functional theory (DFT) calculations were used to determine the compound's stability, chemical reactivity, and other parameters by determining the HOMO-LUMO energy differences. The determination of its optimized surface of the molecular electrostatic potential (MEP) was also carried out. This study was conducted to demonstrate both the electron-rich and electron-poor sites. [ABSTRACT FROM AUTHOR]

In this work, a Zn–benzenetricarboxylic acid (Zn@H3BTC) organic framework coated with a dispersed layer of chitosan (CH/Zn@H3BTC) was synthesized using a solvothermal approach. The synthesized CH/Zn@H3BTC was characterized by Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscope (FESEM), thermal gravimetric analysis (TGA), and Brunauer, Emmett, and Teller (BET) surface area. The microscopic observation and the analysis of the BET surface area of CH/Zn@H3BTC nanocomposites indicated that chitosan plays an important role in controlling the surface morphology and surface properties of the Zn@H3BTC. The obtained findings showed that the surface area and particle size diameter were in the range of 80 m2 g−1 and 800 nm, respectively. The corrosion protection characteristics of the CH/Zn@H3BTC composite in comparison to pristine chitosan on duplex steel in 2.0 M H2SO4 medium determined by electrochemical (E vs. time, PDP, and EIS) approaches exhibited that the entire charge transfer resistance of the chitosan- and CH/Zn@H3BTC-composite-protected films on the duplex steel substrate was comparatively large, at 252.4 and 364.8 Ω cm2 with protection capacities of 94.1% and 97.8%, respectively, in comparison to the unprotected metal surface (Rp = 20.6 Ω cm2), indicating the films efficiently protected the metal from corrosion. After dipping the uninhabited and protected systems, the surface topographies of the duplex steel were inspected by FESEM. We found the adsorption of the CH/Zn@H3BTC composite on the metal interface obeys the model of the Langmuir isotherm. The CH/Zn@H3BTC composite revealed outstanding adsorption on the metal interface as established by MD simulations and DFT calculations. Consequently, we found that the designed CH/Zn@H3BTC composite shows potential as an applicant inhibitor for steel protection. [ABSTRACT FROM AUTHOR]

Soil hosts myriads of living organisms with the extensive potential to produce bioactive compounds. Bacteria are the major soil inhabitants that represent a rich reservoir for antibiotic production along with their role in recycling nutrients and maintenance of the soil ecosystem. Here, from 55 tested soil samples, we isolated and identified a novel antibiotic-producing bacterial strain with a phylogenetically closest match to Bacillus subtilis sp. based on BLASTN search of GenBank for the 16S rRNA gene sequence. We characterized this novel strain through microscopic, biochemical, and molecular techniques, combined with testing its potential antimicrobial activity. Chemical studies revealed that the antibiotic produced by this strain is a glycopeptide. It exhibited profound activity against both methicillin-resistant Staphylococcus aureus (MRSA) and Candida albicans. The antibiotic is optimally produced at 37 °C after 28 h of growth. The biocompatibility of the extracted antibiotic was tested over a wide range of factors including temperature, pH, surfactants, and metal salts. To confirm its therapeutic potential, a sterile solution of the antibiotic was tested in vivo against bacteria-induced keratitis in rats where significant healing activity was recorded. Hence, this soil Bacillus strain may lead to the development of novel antibiotics for the treatment of human pathogens. [ABSTRACT FROM AUTHOR]

Inflammasome targeting and controlling dysbiosis are promising therapeutic approaches to control ulcerative colitis. This report is the first to investigate the mechanisms underlying the coloprotective effects of rosuvastatin and Lactobacillus and their combined therapy on dextran sodium sulfate (DSS)-induced colitis in high-fat diet (HFD)-fed rats. Our results demonstrate the aggravation of intestinal inflammation as a consequence of an HFD following DSS administration. An association between dyslipidemia, LDL oxidation, CD36 expression, ROS generation, thioredoxin-interacting protein (TXNIP) upregulation, and NLRP3 inflammasome activation was demonstrated by DSS exposure in HFD-fed rats. We demonstrated that rosuvastatin/Lactobacillus significantly suppressed the DSS/HFD-induced increase in colon weight/length ratio, DAI, MDI, and myeloperoxidase, as well as corrected dysbiosis and improved histological characteristics. Additionally, caspase-1 activity and IL-1β-driven pyroptotic activity was significantly reduced. Rosuvastatin/Lactobacillus showed prominent anti-inflammatory effects as revealed by the IL-10/IL-12 ratio and the levels of TNF-α and IL-6. These latter effects may be attributed to the inhibition of phosphorylation-induced activation of NF-κB and a concomitant reduction in the expression of NLRP3, pro-IL-1β, and pro-IL-18. Furthermore, rosuvastatin/Lactobacillus reduced Ox-LDL-induced TXNIP and attenuated the inflammatory response by inhibiting NLRP3 inflammasome assembly. To conclude, rosuvastatin/Lactobacillus offers a safe and effective strategy for the management of ulcerative colitis. [ABSTRACT FROM AUTHOR]

Surface composite design was used to study the effect of the ZnO synthesis conditions on its adsorption of methyl orange (MO) and methylene blue (MB). The ZnO was prepared via hydrothermal treatment under different conditions including temperature (T), precursor concentration (C), pH, and reaction time (t). Models were built using four Design expert-11 software-based responses: the point of zero charge (pHzc), MO and MB removal efficiencies (RMO, RMB), MO and MB adsorption capacities (qMO, qMB), and hydrodynamic diameter of ZnO particles (Dh). ZnO was characterized by X-ray diffraction (XRD), Fourier-transform infrared (FTIR) spectroscopy, UV/VIS spectroscopy, thermal gravimetric analysis (TGA), and dynamic light scattering (DLS). The formation of ZnO was confirmed by the XRD, UV, and FTIR spectra. Results showed a very high efficiency for most of the samples for adsorption of MB, and more than 90% removal efficiency was achieved by 8 samples among 33 samples. For MO, more than 90% removal efficiency was achieved by 2 samples among 33 samples. Overall, 26 of 31 samples showed higher MB adsorption capacity than that of MO. RMB was found to depend only on the synthesis temperature while RMO depends on temperature, pH, and reaction time. pHzc was found to be affected by the synthesis pH only while Dh depends on the synthesis pH and precursor concentration. [ABSTRACT FROM AUTHOR]

Several research methodologies have recently been developed to allow for the patterning of conductive lines on elastomeric rubber substrates. Specifically, various conductive materials, substrates, and fabrication techniques were investigated to develop stretchable circuits. One promising technique recommends the application of axial strain on an elastomer substrate prior to patterning conductive lines on it. When the substrate is released, conductive lines buckle to form waves, making the circuit stretchable. However, the majority of applications of stretchable circuits require fitting them to two-dimensional surfaces, such as the human body. Hence, in this paper we propose the concept of radial pre-stretching of the substrates to enhance the stretchability of the fabricated circuits. In particular, straight silver conductive lines were deposited on a polydimethylsiloxane (PDMS) surface using inkjet printing technology, and subsequently tested under both axial and radial loads. Radial pre-stretching was compared to axial pre-stretching, resulting in an improved performance under radial loads. The optimal performance was achieved by pre-stretching the PDMS substrate with a radial strain of 27%. This resulted in stretchable circuits which could sustain radial loads with an average breakdown strain of approximately 19%. Additionally, horseshoe patterns were printed on radially pre-stretched PDMS substrates and their performance was compared to that of their straight line counterparts. Though these patterns are generally favorable for the fabrication of stretchable circuits, the optimal horseshoe pattern examined in this study could only sustain up to 16% radial strain on average when radially pre-stretched by 27%. [ABSTRACT FROM AUTHOR]