Search

Concrete-encased concrete-filled steel tube (CFST) composite columns provide high bearing capacity, good seismic performance and an easier connection with arbitrary angle beams, which are widely used in high-rise buildings. Considering the high frequency of building fires, experimental research investigated the axial compressive behavior of the composite columns' exposure to high temperature in this paper. Fourteen specimens after exposure to high temperatures with different parameters, including the heating temperature, steel tube diameter and concrete cover thickness, were fabricated to test under axial compressive loading. The failure pattern, load-displacement curve, bearing capacity, initial stiffness, deformation performance and damage rule of the specimens were discussed. The test results showed obvious differences in damage of specimens subjected to various high temperatures. The failure of the specimens began with the spalling and crushing of the concrete at the edge and ends in a lantern shape. The load-displacement curves of the specimens were significantly affected by high temperature, while the influence the of steel tube diameter and concrete cover thickness was relatively weak. A method of calculating axially loaded capacity for the composite column exposure to high temperature is proposed considering the effects of the main parameters of heating temperature and steel tube position, and the calculated results are in good agreement with the experimental results. [ABSTRACT FROM AUTHOR]

A complete understanding of the solid-state phase equilibria of the ternary Al–Sn–Y system is essential for the development of both Al-based structural materials and Sn-based lead-free solders. In this work, the phase relationships in the Al–Sn–Y ternary system at 473 K were investigated mainly by means of X-ray powder diffraction (XRD), differential scanning calorimetry (DSC) and scanning electron microscopy (SEM) with energy disperse spectroscopy (EDS) analysis. The existence of 12 binary compounds, namely Sn3Y, Sn5Y2, Sn2Y, Sn10Y11, Sn4Y5, Sn3Y5, AlY2, Al3Y5, Al2Y3, AlY, Al2Y and α–Al3Y, was confirmed. Controversial phases (Sn5Y2 and Al3Y5) were found in this work. This isothermal section consisted of 15 single-phase regions, 27 two-phase regions and 13 three-phase regions. No ternary compounds were found and none of the other phases in this system revealed a remarkable solid solution at 473 K. [ABSTRACT FROM AUTHOR]