Search

In response to the demand for high-power, long-pulse-width 532 nm lasers in the medical and industrial processing fields, this paper explains how the laser cavity of a high-power Nd:YAG 532 nm laser can be extended while maintaining the laser's q-parameter by using a 4f optical system. The results show that at a repetition rate of 10 kHz, the extended cavity achieved a maximum average power of 112 W. Compared with the short cavity, the power was not significantly reduced. The pulse width was extended from 56 ns to 85 ns, and its broadening ratio reached 46.5%. The laser maintained good beam quality during high-power operation. [ABSTRACT FROM AUTHOR]

CVBs (cylindrical vector beams) are widely used in optical imaging, optical trapping, material processing, etc. In this study, based on mode-selective couplers and passive mode-locking fiber technology, a cylindrical vector fiber amplifier with an MOPA (master oscillator power amplifier) structure was developed. In the experiment, the pre-amp stage reached 19.87 mW output power and a CVB output with a mode purity greater than 97%. The measured beam quality factor was M2 = 2.1. The CVB output power obtained by the first-amp stage was 152.4 mW, and the mode purity was greater than 92%. The measured beam quality factor was M2 = 1.99. The internal inhomogeneity and external effects of the isotropic LMA (large-mode-area) fiber led to a decrease in beam quality and mode purity. After amplification, the gain of the fundamental mode was higher and the power was greater, resulting in a greatly reduced mode purity. This CVB fiber amplifier yielded important research value in expanding the applications of high-power fiber lasers. [ABSTRACT FROM AUTHOR]

The performance of a Ce(III)-4,4′,4″-((1,3,5-triazine-2,4,6-triyl) tris (azanediyl)) tribenzoic acid–organic framework (Ce-H3TATAB-MOFs) for capturing excess fluoride in aqueous solutions and its subsequent defluoridation was investigated in depth. The optimal sorption capacity was obtained with a metal/organic ligand molar ratio of 1:1. The morphological characteristics, crystalline shape, functional groups, and pore structure of the material were analyzed via SEM, XRD, FTIR, XPS, and N2 adsorption–desorption experiments, and the thermodynamics, kinetics, and adsorption mechanism were elucidated. The influence of pH and co-existing ions for defluoridation performance were also sought. The results show that Ce-H3TATAB-MOFs is a mesoporous material with good crystallinity, and that quasi-second kinetic and Langmuir models can describe the sorption kinetics and thermodynamics well, demonstrating that the entire sorption process is a monolayer-governed chemisorption. The Langmuir maximum sorption capacity was 129.7 mg g−1 at 318 K (pH = 4). The adsorption mechanism involves ligand exchange, electrostatic interaction, and surface complexation. The best removal effect was reached at pH 4, and a removal effectiveness of 76.57% was obtained under strongly alkaline conditions (pH 10), indicating that the adsorbent has a wide range of applications. Ionic interference experiments showed that the presence of PO43− and H2PO4− in water have an inhibitory effect on defluoridation, whereas SO42−, Cl−, CO32−, and NO3− are conducive to the adsorption of fluoride due to the ionic effect. [ABSTRACT FROM AUTHOR]

With the increasing pollution of electromagnetic (EM) radiation, it is necessary to develop low-cost, renewable electromagnetic interference (EMI) shielding materials. Herein, wood-derived carbon (WC) materials for EMI shielding are prepared by one-step carbonization of renewable wood. With the increase in carbonization temperature, the conductivity and EMI performance of WC increase gradually. At the same carbonization temperature, the denser WC has better conductivity and higher EMI performance. In addition, due to the layered superimposed conductive channel structure, the WC in the vertical-section shows better EMI shielding performance than that in the cross-section. After excluding the influence of thickness and density, the specific EMI shielding effectiveness (SSE/t) value can be calculated to further optimize tree species. We further discuss the mechanism of the influence of the microstructure of WC on its EMI shielding properties. In addition, the lightweight WC EMI material also has good hydrophobicity and heat insulation properties, as well as good mechanical properties. [ABSTRACT FROM AUTHOR]

We developed a high-power, double-intracavity-frequency, diode-side-pumped, Q-switched Nd:YAG laser. The thermal birefringence effect of Nd:YAG crystal was compensated by a quartz rotating mirror, and the stable cavity structure was designed according to the thermal focal length of a single module. A 532 nm laser with a maximum linearly polarized output power of 96 W was obtained at a pumping power of 1300 W and repetition rate of 10 kHz. The pulse width was 55.8 ns, and the beam quality was measured to be M2x = 5.98, M2y = 8.14 at the maximum output power; therefore, a brightness as high as 6.97 × 108 W·cm−2·Sr was achieved. To the best of our knowledge, this is the highest brightness obtained for a high-power Nd:YAG laser at 532 nm. [ABSTRACT FROM AUTHOR]

The occurrence of fluoride contamination in drinking water has gained substantial concern owing to its serious threat to human health. Traditional adsorbents have shortcomings such as low adsorption capacity and poor selectivity, so it is urgent to develop new adsorbents with high adsorption capacity, renewable and no secondary pollution. In this work, magnetic electrospun La-Mn-Fe tri-metal oxide nanofibers (LMF NFs) for fluoride recovery were developed via electrospinning and heat treatment, and its defluoridation property was evaluated in batch trials. Modern analytical tools (SEM, BET, XRD, FTIR) were adopted to characterize the properties of the optimized adsorbent, i.e., LMF11 NFs with a La:Mn molar ratio of 1:1. The surface area calculated via BET method and pHpzc assessed using pH drift method of LMF11 NFs were 55.81 m2 g−1 and 6.47, respectively. The results indicated that the adsorption amount was highly dependent on the pH of the solution, and reached the highest value at pH = 3. The kinetic behavior of defluoridation on LMF11 NFs was dominated by the PSO model with the highest fitted determination coefficients of 0.9999. Compared with the other three isotherm models, the Langmuir model described defluoridation characteristics well with larger correlation coefficients of 0.9997, 0.9990, 0.9987 and 0.9976 at 15 °C, 25 °C, 35 °C and 45 °C, respectively. The optimized LMF11 NFs exhibited superior monolayer defluoridation capacities for 173.30–199.60 mg F−/g at pH 3 at 15–45 °C according to the Langmuir isotherm model. A thermodynamic study proved that the defluoridation by LMF11 NFs is a spontaneous, endothermic along with entropy increase process. In addition, the LMF11 NFs still showed high defluoridation performance after three reused cycles. These findings unveil that the synthesized LMF11 NFs adsorbent is a good adsorbent for fluoride remediation from wastewater owing to its low cost, high defluoridation performance and easy operation. [ABSTRACT FROM AUTHOR]

To promote the bone repair ability of drug-loaded scaffolds, poly(lactic acid) (PLA)/graphene oxide (GO)/Salvianolic acid B (Sal-B)/aspirin (ASA) dual drug-loaded biomimetic composite scaffolds were prepared. The results showed that the addition of these two drugs delayed the gel formation of the composite system, but a biomimetic nanofiber structure could still be obtained by extending the gel time. The addition of Sal-B increased the hydrophilicity of the scaffold, while an increase in ASA reduced the porosity. Dual drug-loaded scaffolds had good haemocompatibility and synergically promoted the proliferation of MC3T3-E1 cells and enhanced alkaline phosphatase activity. Sustained-release experiments of the two drugs showed that the presence of ASA slowed the cumulative release of Sal-B, while Sal-B promoted the release of ASA. Kinetic modeling showed that the release of both drugs conforms to the Korsmeyer–Peppas model, but Sal-B conforms to the Fick diffusion mechanism and ASA follows Fick diffusion and carrier swelling/dissolution. [ABSTRACT FROM AUTHOR]

The zeolitic imidazolate framework-8 (ZIF-8), as a kind of MOF, is widely used in sensors, gas storage/separation, drug delivery, and catalysis due to its adjustable porous structure, high surface area, and excellent chemistry tunability. ZIF-8 is constructed by Zn2+ and 2-methylimidazole and synthesized in the methanol solution. In this paper, we explored the influence of the reused methanol solution for the structure and properties of the synthesized ZIF-8. The as-synthesized ZIF-8 was characterized by an X-ray diffraction instrument (XRD), a scanning electron microscope (SEM), a specific surface area analyzer (BET), and Fourier transform infrared spectroscopy (FT-IR). The results show that the reused methanol solution does not change the phase, porous structure, and BET surface area of ZIF-8. However, the particle size of ZIF-8 increases from 50 nm to 5 um and the productive rate decreases to 7.4% when the methanol solution is reused four times. This work provides new insight into the reuse of dissolvents for the synthesis of MOFs. [ABSTRACT FROM AUTHOR]

Seeking candidate photocatalysts for photocatalytic water splitting, via visible light, is of great interest and importance. In this study, we have comprehensively explored the crystal structures, electronic properties, and optical absorbance of two-dimensional (2D) Sc2CT2 (T = F, Cl, Br) MXenes and their corresponding photocatalytic water splitting, under the visible-light region, by first-principles calculations. Herein, we have proposed that 2D Sc2CT2 MXenes can be fabricated from their layered bulk compounds, alternatively to the traditional chemical etching method. Creatively, we proposed Sc2CT2 (T = F, Br) as new materials; the band edge alignments of Sc2CF2 can be tuned to meet the water redox potentials at pH = 8.0. It is highlighted that Sc2CF2 shows outstanding optical spectra harvested under visible-light wavelength regions, and efficient separation of photo-induced electrons and holes in different zones. These present results provide eloquent evidence and open a new door on the photocatalysis applications of such novel semiconducting MXenes. [ABSTRACT FROM AUTHOR]