Search

Synthetic aperture radar (SAR) has been extensively applied in remote sensing applications. Nevertheless, it is a challenge to process and interpret SAR images. The key to interpreting SAR images lies in transforming them into other forms of remote sensing images to extract valuable hidden remote sensing information. Currently, the conversion of SAR images to optical images produces low-quality results and incomplete spectral information. To address these problems, an end-to-end network model, S2MS-GAN, is proposed for converting SAR images into multispectral images. In this process, to tackle the issues of noise and image generation quality, a TV-BM3D module is introduced into the generator model. Through TV regularization, block-matching, and 3D filtering, these two modules can preserve the edges and reduce the speckle noise in SAR images. In addition, spectral attention is added to improve the spectral features of the generated MS images. Furthermore, we construct a very high-resolution SAR-to-MS image dataset, S2MS-HR, with a spatial resolution of 0.3 m, which is currently the most comprehensive dataset available for high-resolution SAR-to-MS image interpretation. Finally, a series of experiments are conducted on the relevant dataset. Both quantitative and qualitative evaluations demonstrate that our method outperforms several state-of-the-art models in translation performance. The solution effectively facilitates high-quality transitions of SAR images across different types. [ABSTRACT FROM AUTHOR]

Achieving higher accuracy and robustness stands as the central objective in the navigation field. In complex urban environments, the integrity of GNSS faces huge challenges and the performance of integrated navigation systems can be significantly affected. As the proportion of faulty measurements rises, it can result in both missed alarms and false positives. In this paper, a robust method based on factor graph is proposed to improve the performance of integrated navigation systems. We propose a detection method based on multi-conditional analysis to determine whether GNSS is anomalous or not. Moreover, the optimal weight of GNSS measurement is estimated under anomalous conditions to mitigate the impact of GNSS outliers. The proposed method is evaluated through real-world road tests, and the results show the positioning accuracy of the proposed method is improved by more than 60% and the missed alarm rate is reduced by 80% compared with the traditional algorithms. [ABSTRACT FROM AUTHOR]

Optical traps, utilizing a laser to confine and manipulate microscopic particles, are widely employed in various scientific applications. We propose a miniaturized dual-beam fiber optical trap for acceleration sensing. It comprises two counter-propagating beams' output from a customized pair of single-mode fiber pigtailed focusers (SMFPF). We investigate the correlation between the misalignment and the coupling efficiency of the SMFPF pair. By maximizing the coupling efficiency, the optimal alignment is achieved. A multimode fiber (MMF) is introduced to collect and transmit side-scattered light of a trapped microsphere for motion detection. By analyzing the experimental output signal, we acquire displacement information of the trapped microspheres under both aligned and misaligned conditions. This paper provides a simple and practical solution for the alignment of dual beams and the integration of the optical traps' levitation and detection structure, which lay a solid foundation for the further miniaturization of dual-beam optical traps. [ABSTRACT FROM AUTHOR]

Counter-propagating optical tweezers are experimental platforms for the frontier exploration of science and precision measurement. The polarization of the trapping beams significantly affects the trapping status. Using the T-matrix method, we numerically analyzed the optical force distribution and the resonant frequency of counter-propagating optical tweezers in different polarizations. We also verified the theoretical result by comparing it with the experimentally observed resonant frequency. Our analysis shows that polarization has little influence on the radial axis motion, while the axial axis force distribution and the resonant frequency are sensitive to polarization change. Our work can be used in designing harmonic oscillators which can change their stiffness conveniently, and monitoring polarization in counter-propagating optical tweezers. [ABSTRACT FROM AUTHOR]

The optical trapping of micro-nano particles in a high vacuum has become a popular research platform in various frontier fields of physics because of its excellent isolation from the environment. The precise measurement of particle motion information is required to analyze and control particle motion modes in traps. However, the detection accuracy is limited by measurement noise and coupling signals from other axes in microparticle optical traps. In this study, we use the Kalman filter to extract the real motion information of each axis under simulation conditions, and the results show that the Kalman filter performs well in noise suppression, improving the RMSE from 12.64 to 5.18 nm and enhancing the feedback cooling performance by approximately 27% through reducing the axes' signal coupling ratio. We believe that as a solution to these challenges, the Kalman filter will bring a significant achievement to micrometer particle optical traps in vacuums. [ABSTRACT FROM AUTHOR]

Existing preparation methods for microdroplets usually require offline measurements to characterize single microdroplets. Here, we report an optical method used to facilitate the controllable formation and real-time characterization of single microdroplets. The optical tweezer technique was used to capture and form a microdroplet at the center of the trap. The controllable growth and real-time characterization of the microdroplet was realized, respectively, by adjusting experimental parameters and by resolving the Raman spectra by fitting Mie scattering to the spike positions of the spectra during the controllable growth of microdroplets. The proposed method can be potentially applied in optical microlenses and virus detection. [ABSTRACT FROM AUTHOR]

Levitated micro-resonators in vacuums have attracted widespread attention due to their application potential in precision force sensing, acceleration sensing, mass measurement and gravitational wave sensing. The optically levitated microsphere in a counter-propagating dual-beam optical trap has been of particular interest because of its large measurement range and flexible manipulation. In this system, laser intensity fluctuation directly influences the trap stability and measurement sensitivity, which makes it a crucial factor in improving trapping performance. In this paper, a time-varying optical force (TVOF) model is established to characterize the influence of laser intensity fluctuation in a dual-beam optical trap. The model describes the relationship between the laser intensity fluctuation, optical force and the dynamic motion of the micro-sized sphere. In addition, an external laser intensity control method is proposed, which achieved a 16.9 dB laser power stability control at the relaxation oscillation frequency. The long-term laser intensity fluctuation was suppressed from 3% to 0.4% in a one-hour period. Experiments showed that the particle's position detection sensitivity and the stability of the relaxation oscillation could be improved by laser intensity fluctuation suppression. [ABSTRACT FROM AUTHOR]

Geometrical optics approximation is a classic method for calculating the optical trapping force on particles whose sizes are larger than the wavelength of the trapping light. In this study, the effect of the lens misalignment on optical force was analyzed in the geometrical optics regime. We used geometrical optics to analyze the influence of off-axis placement and the tilt of the lens on the trapping position and stiffness in an optical trap. Numerical calculation results showed that lens tilting has a greater impact on the optical trap force than the off-axis misalignments, and both misalignments will couple with each other and cause a shift of the equilibrium point and the asymmetry of the optical trap stiffness in different ways. Our research revealed the asymmetry in optical traps caused by lens misalignment and can provide guidance for optimize lens placement in future experiments. [ABSTRACT FROM AUTHOR]

The focusing properties of elegant third-order Hermite–Gaussian beams (TH3GBs) and the radiation forces exerted on dielectric spherical particles produced by such beams in the Rayleigh scattering regime have been theoretically studied. Numerical results indicate that the elegant TH3GBs can be used to simultaneously trap and manipulate nanosized dielectric spheres with refractive indexes lower than the surrounding medium at the focus and those with refractive indexes larger than the surrounding medium in the focal vicinity. Furthermore, by changing the radius of the beam waist, the transverse trapping range and stiffness at the focal plane can be changed. [ABSTRACT FROM AUTHOR]

As a kind of ultra-sensitive acceleration sensing platform, optical tweezers show a minimum measurable value inversely proportional to the square of the diameter of the levitated spherical particle. However, with increasing diameter, the coupling of the displacement measurement between the axes becomes noticeable. This paper analyzes the source of coupling in a forward-scattering far-field detection regime and proposes a novel method of suppression. We theoretically and experimentally demonstrated that when three variable irises are added into the detection optics without changing other parts of optical structures, the decoupling of triaxial displacement signals mixed with each other show significant improvement. A coupling detection ratio reduction of 49.1 dB and 22.9 dB was realized in radial and axial directions, respectively, which is principally in accord with the simulations. This low-cost and robust approach makes it possible to accurately measure three-dimensional mechanical quantities simultaneously and may be helpful to actively cool the particle motion in optical tweezers even to the quantum ground state in the future. [ABSTRACT FROM AUTHOR]