Search

At the center of the Republic of Djibouti, an eroded rift called Asal is located where tectonic and magmatic activities can be observed at the surface. Multiple studies were carried out with different exploration methods, such as structural, geophysical and hydrogeological, to understand rifting processes and characterize the subsurface of this rift. Among these subsurface exploration methods, the deep geoelectrical structures need to be better defined with the magnetotelluric (MT) method to better delineate the deep resistivity structures. With the objective of improving our understanding of the deep rift structure, magnetotelluric (MT) data acquired in the Asal rift were analyzed and inverted to build a 2D electrical conductivity model of the hydrothermal system. To achieve this, a dimensionality analysis of the MT data along a 2D profile perpendicular to the rift axis was carried out. Results of this analysis justify the approximation of 2D conductivity structure. Then, 2D inversion models were achieved to build models of the conductive structures. Dimensionality analysis results revealed the existence of electrical anisotropy. Consistent correlation between geoelectric strike and electrical anisotropy direction was suggested. Electrical anisotropy direction determined from the ellipticity of the phase tensor for the short periods was interpreted as the consequence of tectonic activity and horizontal deformation of the rift. Moreover, electrical anisotropy direction for the long periods was assumed to be related to the effects of combined magmatic-tectonic activities with predominant magma/dyke intrusion, which implies the vertical deformation and the subsidence of the rift and may imply the alignment of Olivine. Moreover, the variation and rotation of paleo and recent stress fields direction of plate motion in Asal rift located at the junction of three diverging plates—Arabia, Nubia and Somalia—over geological time can generate both magmatic and tectonic activities which in turn can induce a preferred direction of electrical anisotropy which is the direction of the highest conductivity. While the north-south electrical anisotropy direction is parallel to the direction of Red Sea Rift propagation, the north-east electrical anisotropy direction is aligned with the extension direction between Arabia and Somalia plates. Results of the 2D inversion models presented for the Asal rift allowed to identify two superimposed conductive units close to the surface and are interpreted as a shallow aquifer and a wide potential hydrothermal system. These conductive mediums are overlying a relatively resistive medium. The latter is associated with a magmatic system likely containing hot and/or partly molten rocks. The 2D conductivity model developed in this study could be considered as conceptual model of Asal rift prior to modeling multiphase fluid flow and heat transfer and/or could be used to identify the hydrothermal system for future drilling target depth of geothermal exploration. [ABSTRACT FROM AUTHOR]

Asal rift is an aerial rift segment resulting from the westward propagation of the Aden ridge into the Afar Depression. Geothermal manifestations such as hot springs and fumaroles, fault creep, conductivity anomaly, and high geothermal gradient were observed both at the surface and in the subsurface. Despite many scientific works conducted in Asal to understand the rifting mechanisms, the hydrothermal fluid circulation still needs to be evaluated since it is based on simplified conceptual models. To further contribute and progress toward a quantitative evaluation of fluid circulation, a 2D numerical model perpendicular to the rift axis was developed with the objective of better understanding the role of subsurface anisotropy in fluid flow and heat transfer in the Asal rift. Numerical modeling of multiphase flow and heat transfer was carried out with an equivalent porous medium intersected by fault zones having greater permeability. Horizontal anisotropic permeability and magmatic fluid release were taken into account with different simulation scenarios. The results indicate that fault zones act as recharge/discharge areas depending on their location, permeability, and number. Simulations considering horizontal anisotropic permeability allowed the reproduction of the thermal state observed in geothermal wells with the expected general pattern of fluid circulation in the Asal rift. Comparing our result with a recent study made with a 2D numerical modeling parallel to the rift axis, we suggest the presence of a saddle point where fluid flow is both to the northeast and to the southwest direction of the rift. Moreover, magmatic fluid release assumed in two simulation scenarios showed to have an impact on the hydrological behavior of fault zones and facilitate the development of super-critical flow at the center of the rift. [ABSTRACT FROM AUTHOR]

The Asal Rift hosts a lake located in a depression at 150 m below sea level, where recharge is influenced by regional groundwater flow interacting with the Ghoubbet Sea along the coast of Djibouti. This regional groundwater flow is believed to influence hydrothermal fluid circulation, which we aim to better understand in this study, having the objective of developing concepts for geothermal exploration in the area. To this end, magnetotelluric data acquired in the Asal Rift were processed and analyzed. 1D inversion models of electrical conductivity were interpolated for interpretation. These data were then used to build a 2D hydrogeological model, allowing multiphase flow and heat transfer simulations to be performed, considering the regional groundwater flow near the surface and the site topography, in order to confirm the preferred path of fluid flow. Geophysical data analysis indicates the presence of normal faults, notably the H fault, which may act as a conduit for the circulation of hydrothermal fluids and where the hanging wall can be a hydrogeological barrier within the hydrothermal system of the Asal Rift. The results from the 2D numerical flow and heat transfer modelling show the importance of groundwater flow responsible for thermal springs located at the periphery of Asal Lake. Reservoir temperature inferred by means of geothermometry ranging from 200 to 270 °C was shown to correspond to simulated temperature at potential reservoir depth. Moreover, simulated temperature between 600 and 1700 m depth is close to the temperature profile measured in the geothermal well Asal 6 of the area, with less than 20 °C difference. Simulations indicate that hydrothermal fluid circulation is likely influenced by the regional groundwater flow controlled by the topography and the major water bodies, the Ghoubbet Sea and Asal Lake, feeding buoyant fluids interacting with a deep magmatic source and where tectonic activity created normal faults offering a preferred path for fluid circulation. [ABSTRACT FROM AUTHOR]