Search

In this study, we engineered a sub-70 nm nanocomposite of ZnO/Zn2TiO4 using a low-temperature solution-phase method with titanium isopropoxide and zinc acetate as precursors, and isopropyl alcohol and water as solvents. The investigation focused on nanocomposite growth by varying precursor and surfactant concentrations and their efficiency within different pH ranges. All three ZnO/Zn2TiO4 nanocomposites exhibited hexagonal wurtzite ZnO and Zn2TiO4 structures. The crystallite size in these nanocomposites ranged from 39.50 nm to 62.67 nm for ZnO and 21.24 nm to 26.15 nm for Zn2TiO4. Morphological observations using FESEM revealed the formation of dispersed cotton packet-like nanocomposites with sizes ranging from 18 to 350 nm. FTIR analysis showed peaks indicative of Ti–O and Zn–O bond formation, and EDX spectrum confirmed the presence of Ti, O, and Zn. UV spectrums and photocatalytic investigations confirmed the successful formation of ZnO/Zn2TiO4 nanocomposites with notable photocatalytic degradation efficiency for methylene blue dye under various conditions. These findings suggest the potential applicability of the synthesized nanocomposites for environmental pollutant degradation. [ABSTRACT FROM AUTHOR]

Drought and heat stresses are severe threats to crop production and food security in arid and semi-arid regions of the globe, especially during the summer. This study investigates the effects of micro-spray on micro-climatic and physiological characteristics of cucumber and tomato plants for four growing seasons (two growing seasons each (cucumber: 2017 and 2018 and tomato: 2021 and 2022)). The experiment was conducted in a Venlo-type greenhouse where plants were irrigated with a combined micro-spray and drip irrigation (MSDI) system (1 min for tomato (seven times a day) and 2 mins (four times a day) for cucumber) and drip irrigation (DI). Both plants' growth and physiological parameters were recorded at the end of the experiment. Moreover, the experimental results showed that plant height and stem diameter increased under MSDI in all seasons. In addition, a micro-spray duration of 2 min decreased the average daily air temperature (Ta) and leaf temperature (T1) by 0.8 °C and 4.9 °C, respectively, and increased the average daily relative humidity (RH) by 4.3%. However, a micro-spray duration of 1 min reduced the average daily Ta and T1 by 0.76 °C and 4.6 °C, respectively, but the increase in RH (2.7%) was much lower than that in the single micro-spray duration of 2 min. In addition, the net leaf photosynthetic rate (Pn), the effective quantum yield of PSII (ΦPSII), and the stomatal conductance (Gs) of both plants increased under MSDI compared with DI. A K-means analysis showed that MSDI could eliminate the adverse effects of sunlight stress on cucumbers and tomatoes. MSDI increased the yield of cucumber and tomato plants by 18.9% and 40.4%, respectively. The fruit weight of cucumber (2017) and tomato (2021) under MSDI did not increase significantly compared to DI, which indicates that MSDI mitigated heat stress, prevented flowers from being burned, and increased the number of fruits. The results also suggested that the total soluble solids in the cucumbers and tomatoes showed no significant differences (p > 0.05) between the two treatments in four seasons. In conclusion, the MSDI system can be an appropriate strategy for the irrigation needs and climate control of plants grown in greenhouses during the hot season. [ABSTRACT FROM AUTHOR]

Water is a precious natural resource. Unfortunately, bodies of water become polluted by waste, such as untreated wastewater and detritus, along with oil spills, with minimum or no consideration for their limited capacity to renew themselves. Among these pollutants, dyes are harmful as they are persistent and not biodegradable in nature. The present study demonstrates the removal of crystal violet (CV), a toxic cationic dye, by using three systems: Peroxymonosulfate (PMS), UV-254 nm radiation and UV/P5MS. The effects of various parameters, such as the effects of the initial dose of crystal violet, initial concentration of PMS, pH, typical inorganic ions, etc., were also investigated. The effect of pH was investigated in the range of 1.92–12.07. Similarly, the effect of various anions such as NO2•−, HCO3•−, CO3•2−, SO4•2− and CH3COO•− was investigated for the degradation of target pollutants. The order of degradation of crystal violet was UV/PMS > PMS > UV with removal efficiencies of 97%, 76% and 42%, respectively, at reaction times of 60 min. The degradation of crystal violet was enhanced significantly at a pH range of 10.52–12.07. Electrical energy per order (EE/O) values for UV/PMS, PMS and UV were calculated to be 1.68, 3.62 and 48.96 KWh/m3/order, respectively. The addition of inorganic ions inhibited the removal of CV in the order of SO4•2− > NO2•− > HCO3•− > CO3•2− > CH3COO•−. Moreover, the kinetic studies on the degradation of CV by the UV-254 nm, PMS, and UV/PMS systems, were also carried out and found to follow pseudo-first-order kinetics. The study revealed that oxidation processes are most efficacious for the removal of organic dyes from wastewater. [ABSTRACT FROM AUTHOR]

Environmental pollution caused by heavy metal ions has become a major health problem across the world. In this study, a selective colorimetric sensor based on starch functionalized silver nanoparticles (St-Ag NPs) for rapid detection of Hg2+ in real samples was developed. The environmentally friendly green approach was utilized to synthesize starch functionalized silver nanoparticles (St-AgNPs). A multi-technique approach involving UV-Vis absorption spectroscopy, Fourier transform infrared (FT-IR), X-ray diffraction (XRD), and scanning electron microscope (SEM) was used for the characterization of St-Ag NPs. These starch functionalized AgNPs were tested for the detection of heavy metals at 25 °C. The screening process revealed clear changes in the AgNPs color and absorption intensity only in the presence of Hg2+ due to the redox reaction between Ag0 and Hg2+. The color and absorption intensity of nanoparticles remain unchanged in the presence of all the other tested metals ion. The proposed method has strong selectivity and sensitivity to Hg2+ ions, with a detection limit of 1 ppm revealed by UV-visible spectrophotometry. The proposed procedure was found to be successful for the detection of Hg2+ in real samples of tap water. [ABSTRACT FROM AUTHOR]

In recent years, graphene has attracted the interest of many researchers working on LIB anode materials owing to its unique 2D structure, thermal stability, and fast electron transfer. In this work, RGO/Cu/Cu2O nanocomposites were synthesized through a hydrothermal procedure. The as-prepared nanocomposites exhibited a high lithium storage capacity with improved cycling stability and great rate performance, i.e., the discharge capacity was 371.8 mAh/g after 100 cycles at a current density of 500 mA/g. These excellent properties were associated with the sheet structure symmetry of graphene enriched with the multifunctional Cu-Cu2O component, which prevented aggregation and accommodated the volume changes of the anode material during the charge–discharge tests. The RGO/Cu/Cu2O composite conferred to the LIB anode the ability to resist electrode cracking. The approach proposed in this paper can be also generalized for the synthesis of other carbon-based anode materials for LIBs. [ABSTRACT FROM AUTHOR]

Iron oxides are considered promising electrode materials owing to their capability of lithium storage, but their poor conductivity and large volume expansion lead to unsatisfactory cycling stability. In this paper, an inexpensive, highly effective, and facile approach to the synthesis of Fe3O4 nanoparticles/reduced graphene oxide composite (Fe3O4/RGO) is designed. The synthesized Fe3O4/RGO composite exhibits high reversible capability and excellent cyclic capacity as an anode material in lithium-ion batteries (LIBs). A reversible capability of 701.8 mAh/g after 50 cycles at a current density of 200 mA·g−1 can be maintained. The synergetic effect of unique structure and high conductivity RGO promises a well soakage of electrolyte, high structure stability, leading to an excellent electrochemical performance. It is believed that the study will provide a feasible strategy to produce transition metal oxide/carbon composite electrodes with excellent electrochemical performance for LIBs. [ABSTRACT FROM AUTHOR]

In the current research work, palladium (Pd) nanoparticles were electrochemically deposited on a nitrogen doped montmorillonite (CNx-MMT) support using the underpotential deposition (UPD) method. The prepared Pd based composite electrode was studied as an electrocatalyst for methanol fuel oxidation. The catalysts and the supporting materials montmorillonite, acid activated montmorillonite, and nitrogen doped montmorillonite (MMT, HMMT and CNx-HMMT) were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive X-ray spectroscopy (EDS) and electrochemical characterization by cyclic voltammetry (CV). The results indicated that Pd supported on CNx-HMMT possesses enhanced electrocatalytic activity and stability compared to commercial Pd/C, which was attributed to its higher electrochemical surface area (ECSA) (23.00 m2 g−1). The results demonstrated the potential application of novel Pd/CNx-HMMT composite nanomaterial as electrocatalysts for methanol electrooxidation in direct methanol fuel cells (DMFCs). [ABSTRACT FROM AUTHOR]