Search

The need to use renewable sources and matrices with energy potential is widely recognized. The development of innovative technologies aimed at the improvement of energy conversion processes and reducing environmental impacts is currently receiving increasing attention from the scientific community and policymakers. The presence of sugars in airborne particle materials is attributed to biomass combustion. For this reason, these compounds are considered markers of biomass burning. The purpose of this work was to evaluate the emissions produced by agroforestry biomass burning (citrus pruning) by simultaneously sampling both stack emissions and atmospheric particulates in the area around a biomass boiler to understand the real contribution of biomass burning to atmospheric pollution. The combustion tests were carried out by comparing the processes with and without particulate abatement system to see how biomass combustion's contribution to particulate emission can be controlled and reduced. During the tests, the focus was on particulate matter (PM) speciation in terms of sugar marker identification and determination. This study aims to increase knowledge to better understand the contribution of biomass plants to air pollution and differentiate it from the contributions of other sources, such as vehicular traffic or domestic heating. [ABSTRACT FROM AUTHOR]

Rice cultivation stands as the primary agricultural activity in Asia, generating a substantial amount of agricultural waste. Unfortunately, this waste is often disposed of through burning, contributing to severe environmental, health and climate issues. This study presents the characterization of PCDD/Fs, PCBs and PAHs. The emissions were quantified using a fixed-grid-system biomass plant and measuring the macro-pollutants online and sampling the organic micro-pollutants and metals in isokinetic mode, followed by ISO and CEN standards methods. Additionally, the role of agrochemicals was monitored in terms of metal catalysis resulting in POP emissions. This study provides the comprehensive characterization of the most relevant groups of pollutants (metals, PCDD/Fs, PCBs and PAHs) resulting from agricultural waste combustion. Prominent catalytic metals quantified were Cu (22–48 µg/Nm3) and Fe (78–113 µg/Nm3). Rice straw samples from AJK exhibited higher values of organochlorine micro-pollutants compared to those from Punjab and Sindh, i.e., ∑PCDD/F (2594 > 1493 > 856 pg/Nm3) and ∑PCB (41 > 38 > 30 pg/Nm3), respectively, whereas the organic micro-pollutants ∑c-PAH, indicators of incomplete combustion (PICs), were recorded high in the samples from Sindh followed by Punjab and AJK. The average EF is 100 pg/kg, 2.2 pg/kg and 1053.6 µg/kg for ∑PCDD/F, ∑PCB and ∑c-PAH. This study supports the idea that the phenomena leading to the formation of dioxin and dioxin-like compounds are influenced not only by poor combustion but also by the presence of metal catalysts in the burned fuel. [ABSTRACT FROM AUTHOR]

Forestry woodchip and spent mushroom compost have commercial potential as sustainable residues in biological and chemical processes for energy production. This study focuses on the evaluation of agri-food industry waste energy valorization, with the aim to reduce the valuable biomass utilization for energy production without decreasing the process quality, thereby pursuing economic and environmental advantages. Burning trials were conducted in a fluidized bed biomass plant provided with emission abatement systems. The biomass mixture used for combustion was composed of pine and oak woodchip and spent mushroom compost. The biomass used was first characterized through compositional and energetic analysis, and subsequently, during the burning tests, a monitoring sampling campaign was carried out to analyze the gas and particles emission. Optimal combustion conditions were observed during combustion, with good oxidation of the organic material, relatively high CO2 production, and low CO concentration in flue gas. Nevertheless, SO2 concentrations in the combustion flue gas are greater than those found in the combustion of the most commonly used biomasses. In fact, the mixture compositional characterization revealed a non-negligible concentration of sulfur, which explains the high values of SO2 detected in emission. The obtained results confirm that controlled combustion, together with suitable biomasses utilization, preliminary characterization, and emission monitoring, are essential practices for the realization of a sustainable process, both from an energy and environmental point of view. [ABSTRACT FROM AUTHOR]

Agricultural activities lead to the production of large quantities of pruning and residual biomass, the correct disposal of which is a topic of great interest. Unfortunately, although it is an environmentally unacceptable practice, disposal often takes place with uncontrolled combustion in field (open burning). Disposal using biomass boilers produces energy from controlled combustion and the use of abatement systems reduces emissions that are inevitably generated in the combustion processes of solid fuel (CO, CO2, NOx, SO2, PM, etc.). Among the pollutants produced in combustion processes, Persistent Organic Pollutants (POPs) are one of the most relevant groups of chemicals that must be monitored for their effect on human health and the environment. This paper reports the data obtained for the emissive characterization of POPs of three different wood biomass prunings (Olive, Citrus and Grapevine) focusing on VOCs, PAHs, PCBs, PCDD/Fs. Emissions samplings were performed at the stack during combustion in a 30 kWth boiler equipped with a multicyclone filter bag for PM abatement in an isokinetic mode in accordance with the CEN and ISO standards methods. Through this work, a complete emission profile of VOCs, PAHs, PCBs, and PCDD/Fs of three different biomass types is provided for the first time, showing that the use of biomass boilers produces quantities of pollutants below the regulatory limits and still lower than those produced by open burning phenomena. Citrus has shown, regarding the other two essences, elevated concentrations in terms of Σ PAH = 174.247 ng/m3, while Olive gave higher results in terms of PCBs and PCDD/Fs (respectively, 39.769 and 3390.63 TEQ pg/Nm3). This is probably due to the high concentration of iron in this biomass (711.44 mg/kg), which during combustion is a catalyst (together with copper) of PCDD/Fs. [ABSTRACT FROM AUTHOR]

Due to the increasing tattoo practicing in Eastern countries and general concern on tattoo ink composition and safety, the green tattoo inks Green Concentrate by Eternal, for European and "for Asia Market Only" were analyzed, under the premise that only the former falls under a composition regulation. A separation of the additives from the pigment was carried out by successive extraction in solvents of different polarities, i.e., water, acetone and dichloromethane. The solid residues were analyzed by IR and Raman spectroscopies, the liquid fractions by GC/mass spectrometry. The relative pigment load and element traces were also estimated. We found that the European and the Asian inks are based on the same pigment, PG7, restricted in Europe, though at different loads. They have a similar content of harmful impurities, such as Ni, As, Cd and Sb and both contain siloxanes, including harmful D4. Furthermore, they have different physical-chemical properties, the European ink being more hydrophilic, the Asian more hydrophobic. Additionally, the Asian ink contains harmful additives for the solubilization of hydrophobic matrices and by-products of the phthalocyanine synthesis. Teratogenic phthalates are present as well as chlorinated teratogenic and carcinogenic compounds usually associated to the laser treatment for removal purposes, to a larger extent in the European ink. The composition of the inks does not seem to reflect regulatory restrictions, where issued. [ABSTRACT FROM AUTHOR]

Indoor aerosol sources may significantly contribute to the daily dose of particles deposited into the human respiratory system. Therefore, it is important to characterize the aerosols deriving from the operations currently performed in an indoor environment and also to estimate the relevant particle respiratory doses. For this aim, aerosols from indoor combustive and non-combustive sources were characterized in terms of aerosol size distributions, and the relevant deposition doses were estimated as a function of time, particle diameter and deposition site in the respiratory system. Ultrafine particles almost entirely made up the doses estimated. The maximum contribution was due to particles deposited in the alveolar region between the 18th and the 21st airway generation. When cooking operations were performed, respiratory doses per unit time were about ten-fold higher than the relevant indoor background dose. Such doses were even higher than those associated with outdoor traffic aerosol. [ABSTRACT FROM AUTHOR]

The combustion of biomass is a process that is increasingly used for the generation of heat and energy through different types of wood and agricultural waste. The emissions generated by the combustion of biomass include different kinds of macro- and micropollutants whose formation and concentration varies according to the physical and chemical characteristics of the biomass, the combustion conditions, the plants, and the operational parameters of the process. The aim of this work is to evaluate the effect of biomass moisture content on the formation of volatile organic compounds (VOCs) during the combustion process. Wet and dry poplar chips, with a moisture content of 43.30% and 15.00%, respectively, were used in a cogeneration plant based on a mobile grate furnace. Stack's emissions were sampled through adsorbent tubes and subsequently analyzed by thermal desorption coupled with the GC/MS. The data obtained showed that, depending on the moisture content of the starting matrix, which inevitably influences the quality of combustion, there is significant variation in the production of VOCs. [ABSTRACT FROM AUTHOR]

Residential air cleaners exploiting different technologies re commonly used today to remove air contaminants from indoor environments. Different methods have been developed in the USA and Europe to test their efficiency. The one used in the USA provides a more comprehensive view of indoor processes, because testing is performed in a large simulation chamber (28.5 m3), using anthropogenic emissions, such as cigarette smoke, to generate pollution. Testing rooms are also important to investigate new removal technologies, or to improve them. Since no such testing facilities exist in Italy, one of 12.4 m3 was built in which cigarette smoke, resuspended dust from agricultural soil and, for the first time, diesel exhaust emissions were used to generate indoor pollution. Performances were tested with two air cleaning systems, exploiting completely different removal technologies. Accurate values of decay rates of indoor pollutants were obtained using a suite of on-line and out-of-line monitors for the measurement of particulate matter, volatile organic compounds (VOCs) and some inorganic gases. Proton-transfer mass spectrometry (PTR-MS) provided an almost real-time detection of several VOCs and H2S, at trace levels (0.01 ppbv). A method using a common in vitro bioassay was developed to assess the ability of air cleaners to remove indoor toxic substances. [ABSTRACT FROM AUTHOR]

Active carbon-based sorbents are well known and are used in analytical chemistry. Activated carbon fibers (ACFs) are mainly used as abatement systems in industrial emission pollution control. The objective of this study was to extend the use of ACFs in analytical chemistry for the analysis of polychlorodibenzo-p-dioxins (PCDDs), polychlorodibenzofurans (PCDFs), dioxin-like polychlorobiphenyls (PCBs), and chlorobenzenes (CBs). For this purpose, the extraction efficiency was evaluated based on the QA/QC criteria defined by EPA/ISO reference methods on 13C-standards recovery rates. The procedures tested were ultrasonic assisted extraction (UAE), Soxhlet extraction (SE), accelerated solvent extraction (ASE), and microwave-assisted extraction (MAE). Each experiment was performed in triplicate to ensure the repeatability of the results, and a second extraction assessed the complete extraction. The comparison of the results of each set of experiments with the minimum requirements of the reference methods for each class of compounds led to SE being chosen as the best technique. SE with toluene resulted in a reduction of time and costs and with respect to the other investigated techniques. The present work demonstrated that ACFs can be used in environmental fields means of both prevention and control (exploiting the adsorbent characteristics) and for analytical purposes (exploiting the desorption) for the described chlorinated classes of pollutants. [ABSTRACT FROM AUTHOR]

Ammonia is a common factor linking air in bat caves and air pollution in the proximity of agricultural fields treated with livestock farming sewage and slaughterhouses, where important clusters of COVID-19 have recently been reported all over the world. Such a commonality has a further connection with the known behavior of some viruses of the coronavirus family, such as the murine hepatitis virus, whose spike glycoprotein (S) can be triggered to a membrane-binding conformation at pH 8.0. Within the airborne route of virus transmission, with particular relevance for crowded and enclosed environments, these observations have prompted a hypothesis that may represent a contributing cause to interpret the geographical variability of the virus diffusion and the surging rise of COVID-19 cases in slaughterhouses all over the world. The hypothesis is that, in these environments, the SARS-CoV-2 S protein may find on a fraction of the airborne particles an alkaline pH, favorable to trigger the conformational changes, needed to induce the fusion of the viral envelope with the plasma membrane of the target cells. [ABSTRACT FROM AUTHOR]

Polychlorinated byphenyls (PCBs) are a class of Persistent Organic Pollutants extremely hard to remove from soil. The use of plants to promote the degradation of PCBs, thanks to synergic interactions between roots and the natural soil microorganisms in the rhizosphere, has been proved to constitute an effective and environmentally friendly remediation technique. Preliminary microcosm experiments were conducted in a greenhouse for 12 months to evaluate the capacity of the Monviso hybrid poplar clone, a model plant for phytoremediation, to grow in a low quality and PCB-contaminated soil in order to assess if this clone could be subsequently used in a field experiment. For this purpose, three different soil conditions (Microbiologically Active, Pre-sterilized and Hypoxic soils) were set up in order to assess the capacity of this clone to grow in the polluted soil in these different conditions and support the soil microbial community activity. The growth and physiology (chlorophyll content, chlorophyll fluorescence, ascorbate, phenolic compounds and flavonoid contents) of the poplar were determined. Moreover, chemical analyses were performed to assess the concentrations of PCB indicators in soil and plant roots. Finally, the microbial community was evaluated in terms of total abundance and activity under the different experimental conditions. Results showed that the poplar clone was able to grow efficiently in the contaminated soil and to promote microbial transformations of PCBs. Plants grown in the hypoxic condition promoted the formation of a higher number of higher-chlorinated PCBs and accumulated lower PCBs in their roots. However, plants in this condition showed a higher stress level than the other microcosms, producing higher amounts of phenolic, flavonoid and ascorbate contents, as a defence mechanism. [ABSTRACT FROM AUTHOR]

Drying is a critical point for the exploitation of biomass for energy production. High moisture content negatively affects the efficiency of power generation in combustion and gasification systems. Different types of dryers are available however; it is known that rotary dryers have low cost of maintenance and consume 15% and 30% less in terms of specific energy. The study analyzed the drying process of woody residues using a new prototype of mobile rotary dryer cocurrent flow. Woodchip of poplar (Populus spp.), black locust (Robinia pseudoacacia L.), and grapevine (Vitis vinifera L.) pruning were dried in a rotary drier. The drying cycle lasted 8 h for poplar, 6 h for black locust, and 6 h for pruning of grapevine. The initial biomass had a moisture content of around 50% for the poplar and around 30% for grapevine and black locust. The study showed that some characteristics of the biomass (e.g., initial moisture content, particle size distribution, bulk density) influence the technical parameters (i.e., airflow temperature, rate, and speed) of the drying process and, hence, the energy demand. At the end of the drying process, 17% of water was removed for poplar wood chips and 31% for grapevine and black locust wood chips. To achieve this, result the three-biomass required 1.61 (poplar), 0.86 (grapevine), and 1.12 MJ kgdry solids−1 (black locust), with an efficiency of thermal drying (η) respectively of 37%, 12%, and 27%. In the future, the results obtained suggest an increase in the efficiency of the thermal insulation of the mobile dryer, and the application of the mobile dryer in a small farm, for the recovery of exhaust gases from thermal power plants. [ABSTRACT FROM AUTHOR]