Search

Background: Focal liver lesions (FLL) often require cytohistological evaluation. Endoscopic Ultrasound (EUS)-guided tissue acquisition (EUS-TA) is highly accurate in diagnosing pancreatic and gastrointestinal malignancies. The aim of our study was to evaluate the role of EUS-TA in the characterization of FLL. Methods: A retrospective analysis of a prospective database of patients who underwent EUS-TA for the evaluation of FLL. Diagnostic yield, adverse events and factors associated with diagnostic yield were evaluated as endpoints. The effect of variables such as needle size, lesion size, rapid on-site evaluation (ROSE) and the use of cytological or histological needles were analyzed. Results: A total of 114 cases were included (mean age 68.05 ± 11.35 years, 64 male). A correct diagnosis was made using EUS-TA in 100 of the 114 cases (diagnostic yield of 88%). The EUS-TA of additional extrahepatic lesions during the same EUS procedure increased the diagnostic yield to 94%. No adverse events were reported. Multivariate analysis did not identify any factor influencing the diagnostic yield. Conclusions: EUS-TA is a highly accurate and safe technique for the differential diagnosis of FLL and could be considered as the primary approach in this setting. [ABSTRACT FROM AUTHOR]

Obstructive sleep apnea (OSA) is quite prevalent during pregnancy and is associated with adverse perinatal outcomes, but its potential influence on fetal development remains unclear. This study investigated maternal OSA impact on the fetus by analyzing gene expression profiles in whole cord blood (WCB). Ten women in the third trimester of pregnancy were included, five OSA and five non-OSA cases. WCB RNA expression was analyzed by microarray technology to identify differentially expressed genes (DEGs) under OSA conditions. After data normalization, 3238 genes showed significant differential expression under OSA conditions, with 2690 upregulated genes and 548 downregulated genes. Functional enrichment was conducted using gene set enrichment analysis (GSEA) applied to Gene Ontology annotations. Key biological processes involved in OSA were identified, including response to oxidative stress and hypoxia, apoptosis, insulin response and secretion, and placental development. Moreover, DEGs were confirmed through qPCR analyses in additional WCB samples (7 with OSA and 13 without OSA). This highlighted differential expression of several genes in OSA (EGR1, PFN1 and PRKAR1A), with distinct gene expression profiles observed during rapid eye movement (REM)-OSA in pregnancy (PFN1, UBA52, EGR1, STX4, MYC, JUNB, and MAPKAP). These findings suggest that OSA, particularly during REM sleep, may negatively impact various biological processes during fetal development. [ABSTRACT FROM AUTHOR]

During the course of a project investigating culturable Ascomycota diversity from freshwater sediments in Spain, we isolated 63 strains of cycloheximide-resistant fungi belonging to the order Onygenales. These well-known ascomycetes, able to infect both humans and animals, are commonly found in terrestrial habitats, colonizing keratin-rich soils or dung. Little is known about their diversity in aquatic environments. Combining morphological features and sequence analyses of the ITS and LSU regions of the nrDNA, we identified 14 species distributed in the genera Aphanoascus, Arachniotus, Arthroderma, Arthropsis, Emmonsiellopsis, Gymnoascoideus, Leucothecium, Malbranchea, and Myriodontium. Furthermore, three novel species for the genus Malbranchea are proposed as M. echinulata sp. nov., M. irregularis sp. nov., and M. sinuata sp. nov. The new genera Albidomyces and Neoarthropsis are introduced based on Arachniotus albicans and Arthropsis hispanica, respectively. Neoarthropsis sexualis sp. nov. is characterized and differentiated morphologically from its counterpart by the production of a sexual morph. The novel family Neoarthropsidaceae is proposed for the genera Albidomyes, Apinisia, Arachnotheca, Myriodontium, and Neoarthropsis, based on their phylogenetic relationships and phenotypic and ecological traits. Pseudoamaurascopsis gen. nov. is introduced to accommodate P. spiralis sp. nov., a fungus with unclear taxonomy related to Amaurascopsis and Polytolypa. We traced the ecology and global distribution of the novel fungi through ITS environmental sequences deposited in the GlobalFungi database. Studying the fungal diversity from freshwater sediments not only contributes to filling gaps in the relationships and taxonomy of the Ascomycota but also gives us insights into the fungal community that might represent a putative risk to the health of animals and humans inhabiting or transient in aquatic environments. [ABSTRACT FROM AUTHOR]

Endoscopic ultrasound (EUS) is an essential technique for the management of several diseases. Over the years, new technologies have been developed to improve and overcome certain limitations related to EUS-guided tissue acquisition. Among these new methods, EUS-guided elastography, which is a real-time method for the evaluation of tissue stiffness, has arisen as one of the most widely recognized and available. At present, there are available two different systems to perform an elastographic evaluation: strain elastography and shear wave elastography. Strain elastography is based on the knowledge that certain diseases lead to a change in tissue hardness while shear wave elastography monitored shear-wave propagation and measures its velocity. EUS-guided elastography has shown in several studies high accuracy in differentiating benign from malignant lesions from many different locations, mostly in the pancreas and lymph nodes. Therefore, nowadays, there are well-established indications for this technology, mainly for supporting the management of pancreatic diseases (diagnosis of chronic pancreatitis and differential diagnosis of solid pancreatic tumors) and characterization of different diseases. However, there are more data on new potential indications for the near future. In this review, we will present the theoretical bases of this technology and we will discuss the scientific evidence to support its use. [ABSTRACT FROM AUTHOR]

The present work aims to develop thermosetting resins using epoxidized hemp oil (EHO) as a bio-based epoxy matrix and a mixture of methyl nadic anhydride (MNA) and maleinized hemp oil (MHO) in different ratios as hardeners. The results show that the mixture with only MNA as a hardener is characterized by high stiffness and brittleness. In addition, this material is characterized by a high curing time of around 170 min. On the other hand, as the MHO content in the resin increases, the mechanical strength properties decrease and the ductile properties increase. Therefore, it can be stated that the presence of MHO confers flexible properties to the mixtures. In this case, it was determined that the thermosetting resin with balanced properties and high bio-based content contains 25% MHO and 75% MNA. Specifically, this mixture obtained a 180% higher impact energy absorption and a 195% lower Young's modulus than the sample with 100% MNA. Also, it has been observed that this mixture has significantly shorter times than the mixture containing 100% MNA (around 78 min), which is of great concern at an industrial level. Therefore, thermosetting resins with different mechanical and thermal properties can be obtained by varying the MHO and MNA content. [ABSTRACT FROM AUTHOR]

The aim of this study was to investigate the cytotoxic activity of the Coriandrum sativum (C. sativum) ethanolic extract (CSEE) in neuroblastoma cells, chemically characterize the compounds present in the CSEE, and predict the molecular interactions and properties of ADME. Thus, after obtaining the CSEE and performing its chemical characterization through dereplication methods using UPLC/DAD-ESI/HRMS/MS, PM6 methods and the SwissADME drug design platform were used in order to predict molecular interactions and ADME properties. The CSEE was tested for 24 h in neuroblastoma cells to the establishment of the IC50 dose. Then, the cell death was evaluated, using annexin-PI, as well as the activity of the effector caspase 3, and the protein and mRNA levels of Bax and Bcl-2 were analyzed by ELISA and RT-PCR, respectively. By UHPLC/DAD/HRMS-MS/MS analysis, the CSEE showed a high content of isocoumarins-dihydrocoriandrin, coriandrin, and coriandrones A and B, as well as nitrogenated compounds (adenine, adenosine, and tryptophan). Flavonoids (apigenin, hyperoside, and rutin), phospholipids (PAF C-16 and LysoPC (16:0)), and acylglicerol were also identified in lower amount as important compounds with antioxidant activity. The in silico approach results showed that the compounds 1 to 6, which are found mostly in the C. sativum extract, obey the "Five Rules" of Lipinski, suggesting a good pharmacokinetic activity of these compounds when administered orally. The IC50 dose of CSEE (20 µg/mL) inhibited cell proliferation and promoted cell death by the accumulation of cleaved caspase-3 and the externalization of phosphatidylserine. Furthermore, CSEE decreased Bcl-2 and increased Bax, both protein and mRNA levels, suggesting an apoptotic mechanism. CSEE presents cytotoxic effects, promoting cell death. In addition to the promising results predicted through the in silico approach for all compounds, the compound 6 showed the best results in relation to stability due to its GAP value. [ABSTRACT FROM AUTHOR]

Although the Pleosporaceae is one of the species-richest families in the Pleosporales, research into less-explored substrates can contribute to widening the knowledge of its diversity. In our ongoing survey on culturable Ascomycota from freshwater sediments in Spain, several pleosporacean specimens of taxonomic interest were isolated. Phylogenetic analyses based on five gene markers (ITS, LSU, gapdh, rbp2, and tef1) revealed that these fungi represent so far undescribed lineages, which are proposed as two novel genera in the family, i.e., Neostemphylium typified by Neostemphylium polymorphum sp. nov., and Scleromyces to accommodate Scleromyces submersus sp. nov. Neostemphylium is characterized by the production of phaeodictyospores from apically swollen and darkened conidiogenous cells, the presence of a synanamorph that consists of cylindrical and brown phragmoconidia growing terminally or laterally on hyphae, and by the ability to produce secondary conidia by a microconidiation cycle. Scleromyces is placed phylogenetically distant to any genera in the family and only produces sclerotium-like structures in vitro. The geographic distribution and ecology of N. polymorphum and Sc. submersus were inferred from metabarcoding data using the GlobalFungi database. The results suggest that N. polymorphum is a globally distributed fungus represented by environmental sequences originating primarily from soil samples collected in Australia, Europe, and the USA, whereas Sc. submersus is a less common species that has only been found associated with one environmental sequence from an Australian soil sample. The phylogenetic analyses of the environmental ITS1 and ITS2 sequences revealed at least four dark taxa that might be related to Neostemphylium and Scleromyces. The phylogeny presented here allows us to resolve the taxonomy of the genus Asteromyces as a member of the Pleosporaceae. [ABSTRACT FROM AUTHOR]

The prediction of how a ligand binds to its target is an essential step for Structure-Based Drug Design (SBDD) methods. Molecular docking is a standard tool to predict the binding mode of a ligand to its macromolecular receptor and to quantify their mutual complementarity, with multiple applications in drug design. However, docking programs do not always find correct solutions, either because they are not sampled or due to inaccuracies in the scoring functions. Quantifying the docking performance in real scenarios is essential to understanding their limitations, managing expectations and guiding future developments. Here, we present a fully automated pipeline for pose prediction validated by participating in the Continuous Evaluation of Ligand Pose Prediction (CELPP) Challenge. Acknowledging the intrinsic limitations of the docking method, we devised a strategy to automatically mine and exploit pre-existing data, defining—whenever possible—empirical restraints to guide the docking process. We prove that the pipeline is able to generate predictions for most of the proposed targets as well as obtain poses with low RMSD values when compared to the crystal structure. All things considered, our pipeline highlights some major challenges in the automatic prediction of protein–ligand complexes, which will be addressed in future versions of the pipeline. [ABSTRACT FROM AUTHOR]

Featured Application: In the present work, green-composites have been developed from a partially biobased epoxy resin reinforced with flaxseed flour wastes. The attractive aesthetic appearance, similar to wood, and the balanced overall properties of the obtained composites may be interesting for use in sectors such as decoration, furniture or automotive industry. In the present work, green-composites from a partially biobased epoxy resin (BioEP) reinforced with lignocellulosic particles, obtained from flax industry by-products or wastes, have been manufactured by casting. In this study, the flaxseed has been crushed by two different mechanical milling processes to achieve different particle sizes, namely coarse size (CFF), and fine size (FFF) particle flaxseed flour, with a particle size ranging between 100–220 µm and 40–140 µm respectively. Subsequently, different loadings of each particle size (10, 20, 30, and 40 wt%) were mixed with the BioEP resin and poured into a mold and subjected to a curing cycle to obtain solid samples for mechanical, thermal, water absorption, and morphological characterization. The main aim of this research was to study the effect of the particle size and its content on the overall properties of composites with BioEP. The results show that the best mechanical properties were obtained for composites with a low reinforcement content (10 wt%) and with the finest particle size (FFF) due to a better dispersion into the matrix, and a better polymer-particle interaction too. This also resulted in a lower water absorption capacity due to the presence of fewer voids in the developed composites. Therefore, this study shows the feasibility of using flax wastes from the seeds as a filler in highly environmentally friendly composites with a wood-like appearance with potential use in furniture or automotive sectors. [ABSTRACT FROM AUTHOR]

Featured Application: This work can be used as benchmark for performance evaluation of tools to improve supply chain management in general and solid biofuel supply chain in particular. The potential application is for integrated goods distribution management that promotes efficient resource utilization and sustainability. The paper presents a report on the performance evaluation of a newly developed smart logistics system (SLS). Field tests were conducted in Spain, Germany, and Sweden. The evaluation focused on the performance of a smart box tool (used to capture information during biomass transport) and a web-based information platform (used to monitor the flow of agricultural pruning from farms to end users and associated information flow). The tests were performed following a product usability testing approach, considering both qualitative and quantitative parameters. The detailed performance evaluation included the following: systematic analysis of 41 recordable parameters (stored in a spreadsheet database), analysis of feedback and problems encountered during the tests, and overall quality analysis applying the product quality model adapted from ISO/IEC FDIS 9126-1 standard. The data recording and storage and the capability to support product traceability and supply chain management were found to be very satisfactory, while assembly of smart box components (mainly the associated cables), data transferring intervals, and manageability could be improved. From the data retrieved during test activities, in more than 95% of the parameters within 41 columns, the expected values were displayed correctly. Some errors were observed, which might have been caused mainly by barriers that could hinder proper data recording and transfer from the smart box to the central database. These problems can be counteracted and the performance of the SLS can be improved so that it can be upgraded to be a marketable tool that can promote sustainable biomass-to-energy value chains. [ABSTRACT FROM AUTHOR]

Featured Application: The specific application of this work is that it improves management of solid biofuel supply chain. Its potential application is for integrated product distribution management where product quality control and traceability can be integrated to increase customer satisfaction and resource utilization, and reduce logistics cost as well as environmental impact. Agricultural pruning biomass is one of the important resources in Europe for generating renewable energy. However, utilization of the agricultural residues requires development of efficient and effective logistics systems. The objective of this study was to develop smart logistics system (SLS) appropriate for the management of the pruning biomass supply chain. The paper describes the users’ requirement of SLS, defines the technical and functional requirements and specifications for the development of SLS, and determines relevant information/data to be documented and managed by the SLS. This SLS has four major components: (a) Smart box, a sensor unit that enables measurement of data such as relative humidity, temperature, geographic positions; (b) On-board control unit, a unit that performs route planning and monitors the recordings by the smart box; (c) Information platform, a centralized platform for data storing and sharing, and management of pruning supply chain and traceability; and (d) Central control unit, an interface linking the Information platform and On-board control unit that serves as a point of administration for the whole pruning biomass supply chain from harvesting to end user. The SLS enables the improvement of performance of pruning biomass supply chain management and product traceability leading to a reduction of product loss, increased coordination of resources utilisation and quality of solid biofuel supply, increased pruning marketing opportunity, and reduction of logistics cost. This SLS was designed for pruning biomass, but could also be adapted for any type of biomass-to-energy initiatives. [ABSTRACT FROM AUTHOR]

The ecosystem services (ES) approach offers an integrated perspective of social-ecological systems, suitable for holistic assessments of mining impacts. Yet for ES models to be policy-relevant, methodological consensus in mining contexts is needed. We review articles assessing ES in mining areas focusing on freshwater components and policy support potential. Twenty-six articles were analysed concerning (i) methodological complexity (data types, number of parameters, processes and ecosystem–human integration level) and (ii) potential applicability for policy development (communication of uncertainties, scenario simulation, stakeholder participation and management recommendations). Articles illustrate mining impacts on ES through valuation exercises mostly. However, the lack of ground- and surface-water measurements, as well as insufficient representation of the connectivity among soil, water and humans, leave room for improvements. Inclusion of mining-specific environmental stressors models, increasing resolution of topographies, determination of baseline ES patterns and inclusion of multi-stakeholder perspectives are advantageous for policy support. We argue that achieving more holistic assessments exhorts practitioners to aim for high social-ecological connectivity using mechanistic models where possible and using inductive methods only where necessary. Due to data constraints, cause–effect networks might be the most feasible and best solution. Thus, a policy-oriented framework is proposed, in which data science is directed to environmental modelling for analysis of mining impacts on water ES. [ABSTRACT FROM AUTHOR]

Highly environmentally-friendly fibreboards were manufactured by hot-press moulding using Posidonia ocaeanica wastes and a partially biobased epoxy resin as binder. Fibreboards with a constant fibre content of 70 wt % were successfully manufactured by thermo-compression. The effects of a conventional alkali treatment were compared to the synergistic effects that additional silanization with two silanes (amino and glycidyl) can exert on the mechanical and thermo-mechanical properties of fibreboards. The results revealed a remarkable improvement of the mechanical properties with the combination of the alkali treatment followed by the silanization. Scanning electron microscopy also revealed increased resin-fibre interactions due to the synergistic effect of both amino-and glycidyl-silanes. These fibreboards represent a formaldehyde-free solution and can positively contribute to sustainable development as the lignocellulosic component is a waste and the binder resin is partially biobased. [ABSTRACT FROM AUTHOR]

The water footprint of energy systems must be considered, as future water scarcity has been identified as a major concern. This work presents a general life cycle network modeling and optimization framework for energy-based products and processes using a functional unit of liters of water consumed in the processing pathway. We analyze and optimize the water-energy nexus over the objectives of water footprint minimization, maximization of economic output per liter of water consumed (economic efficiency of water), and maximization of energy output per liter of water consumed (energy efficiency of water). A mixed integer, multiobjective nonlinear fractional programming (MINLFP) model is formulated. A mixed integer linear programing (MILP)-based branch and refine algorithm that incorporates both the parametric algorithm and nonlinear programming (NLP) subproblems is developed to boost solving efficiency. A case study in bioenergy is presented, and the water footprint is considered from biomass cultivation to biofuel production, providing a novel perspective into the consumption of water throughout the value chain. The case study, optimized successively over the three aforementioned objectives, utilizes a variety of candidate biomass feedstocks to meet primary fuel products demand (ethanol, diesel, and gasoline). A minimum water footprint of 55.1 ML/year was found, economic efficiencies of water range from -$1.31/L to $0.76/L, and energy efficiencies of water ranged from 15.32 MJ/L to 27.98 MJ/L. These results show optimization provides avenues for process improvement, as reported values for the energy efficiency of bioethanol range from 0.62 MJ/L to 3.18 MJ/L. Furthermore, the proposed solution approach was shown to be an order of magnitude more efficient than directly solving the original MINLFP problem with general purpose solvers. [ABSTRACT FROM AUTHOR]

3D reconstruction based on laser light projection is a well-known method that generally provides accurate results. However, when this method is used for inspection in uncontrolled environments, it is greatly affected by vibrations. This paper presents a structured-light sensor based on two laser stripes that provides a 3D reconstruction without vibrations. Using more than one laser stripe provides redundant information than is used to compensate for the vibrations. This work also proposes an accurate calibration process for the sensor based on standard calibration plates. A series of experiments are performed to evaluate the proposed method using a mechanical device that simulates vibrations. Results show excellent performance, with very good accuracy. [ABSTRACT FROM AUTHOR]

Sintering is a complex industrial process that applies heat to fine particles of iron ore and other materials to produce sinter, a solidified porous material used in blast furnaces. The sintering process needs to be carefully adjusted, so that the combustion zone reaches the bottom of the material just before the discharge end. This is known as the burnthrough point. Many different parameters need to be finely tuned, including the speed and the quantities of the materials mixed. However, in order to achieve good results, sintering control requires precise feedback to adjust these parameters. This work presents a sensor to monitor the sintering burn-through point based on infrared thermography. The proposed procedure is based on the acquisition of infrared images at the end of the sintering process. At this position, infrared images contain the cross-section temperatures of the mixture. The objective of this work is to process this information to extract relevant features about the sintering process. The proposed procedure is based on four steps: key frame detection, region of interest detection, segmentation and feature extraction. The results indicate that the proposed procedure is very robust and reliable, providing features that can be used effectively to control the sintering process. [ABSTRACT FROM AUTHOR]

Carrot (Daucus carota L.) is widely cultivated as one of the most important root crops, and developing an effective presowing treatment method can promote the development of modern mechanized precision sowing. In the present study, a novel seed priming technology, named hydro-electro hybrid priming (HEHP), was used to promote the germination of carrot seeds. Seed germination experiments showed that HEHP was able to increase the germination index (GI) and vigor index (VI) by 3.1-fold and 6.8-fold, respectively, and the effect was significantly superior to that of hydro-priming (HYD) and electrostatic field treatment (EF). The consumption and utilization rate of seed storage reserves were also greatly improved. Meanwhile, both glyoxysomes and mitochondria were found to appear ahead of time in the endosperm cells of HEHP through observations of the subcellular structure of the endosperm. Activities of isocitrate lyase (ICL), NAD-dependent malate dehydrogenase (MDH), pyruvate kinase (PK), and alcohol dehydrogenase (ADH) were significantly increased by HEHP. From transcriptome results, Kyoto Encyclopedia of Genes and Genomes (KEGG) pathways related to the glyoxylate cycle, glycolysis, gluconeogenesis, and the citrate cycle were significantly enriched and real-time quantitative PCR (qRT-PCR) analysis confirmed the expression pattern of 15 critical differentially expressed genes (DEGs) in these pathways. All DEGs encoding MDH, phosphoenolpyruvate carboxykinase (PEPCK), and PK were upregulated in HEHP; thus, it is reasonable to infer that the transformation of malate, oxalacetate, phosphoenolpyruvate, and pyruvate in the cytoplasm may be pivotal for the energy supply during early germination. The results suggest that the optimal effect of HEHP is achieved by initiating stored lipid utilization and respiratory metabolism pathways related to germination. [ABSTRACT FROM AUTHOR]

Framing the Circular Bioeconomy, the use of reactive compatibilizers was applied in order to increase the interfacial adhesion and, hence, the physical properties and applications of green composites based on biopolymers and food waste derived lignocellulosic fillers. In this study, poly(butylene succinate) grafted with maleic anhydride (PBS-g-MAH) was successfully synthetized by a reactive melt-mixing process using poly(butylene succinate) (PBS) and maleic anhydride (MAH) that was induced with dicumyl peroxide (DCP) as a radical initiator and based on the formation of macroradicals derived from the hydrogen abstraction of the biopolymer backbone. Then, PBS-g-MAH was used as reactive compatibilizer for PBS filled with different contents of pistachio shell flour (PSF) during melt extrusion. As confirmed by Fourier transform infrared (FTIR), PBS-g-MAH acted as a bridge between the two composite phases since it was readily soluble in PBS and could successfully form new esters by reaction of its multiple MAH groups with the hydroxyl (–OH) groups present in cellulose or lignin of PSF and the end ones in PBS. The resultant compatibilized green composites were, thereafter, shaped by injection molding into 4-mm thick pieces with a wood-like color. Results showed significant increases in the mechanical and thermomechanical rigidity and hardness, meanwhile variations on the thermal stability were negligible. The enhancement observed was related to the good dispersion and the improved filler-matrix interfacial interactions achieved by PBS-g-MAH and also to the PSF nucleating effect that increased the PBS's crystallinity. Furthermore, water uptake of the pieces progressively increased as a function of the filler content, whereas the disintegration in controlled compost soil was limited due to their large thickness. [ABSTRACT FROM AUTHOR]

Thus, cellulose chemical modifications have been widely studied and nowadays several cellulose derivatives can be found commercially such as carboxymethyl cellulose (CMC), methyl cellulose (MC), hydroxyethyl cellulose (HEC), hydroxypropyl methylcellulose (HPMC), and cellulose acetate (CA). Future research efforts on biobased polymer extraction and production methods, as well as the optimization of their final production into co-polymers, blends, composites, and nanocomposites, are still needed to properly transfer the proposed developments, as well as future ones from the laboratory scale level to the industrial sector to reach more environmentally friendly materials within a circular economy approach. Thus, in the last few years, the increased bio-based polymer production and application have positioned biopolymers as one of the most promising ways to meet the sustainable development goal of replacing traditional petroleum polymers with more sustainable materials in several industrial sectors. The overall performance of the hyphal polysaccharide/cellulose blends was highly affected by the microstructural features of each cellulosic material, while the ability of functional groups of hyphal polysaccharides to establish hydrogen bonding interactions with cellulose fibers was one of the key elements of network formation which determined the final blend properties and the potential applications. [Extracted from the article]

The present works focuses on the development of a novel fully bio-based composite using a bio-based high-density polyethylene (Bio-HDPE) obtained from sugar cane as matrix and a by-product of extraction of chia seed oil (CO) as filler, with the objective of achieving a circular economy model. The research aims to revalorize an ever-increasing waste stream produced by the growing interest in vegetable oils. From the technical point of view, the chia seed flour (CSF) was chemically modified using a silane treatment. This treatment provides a better interfacial adhesion as was evidenced by the mechanical and thermal properties as well as field emission scanning electron microscopy (FESEM). The effect of silane treatment on water uptake and disintegration rate was also studied. On the other hand, in a second stage, an optimization of the percentage of treated CSF used as filler was carried out by a complete series of mechanical, thermal, morphological, colour, water absorption and disintegration tests with the aim to evaluate the new composite developed using chia by-products. It is noteworthy as the disintegration rate increased with the addition of CSF filler, which leads to obtain a partially biodegradable wood plastic composite (WPC) and therefore, becoming more environmentally friendly. [ABSTRACT FROM AUTHOR]

In this study, for the first time, Brazil nut seed oil was chemically modified with maleic anhydride to obtain maleinized Brazil nut seed oil (MBNO). The same process was developed to obtain maleinized hemp seed oil (MHO). The use of MBNO and MHO was studied as bio-based plasticizers by incorporating them with different contents ranging from 0 to 10 phr in a polylactic acid (PLA) matrix. By means of mechanical, thermal and thermomechanical characterization techniques, the properties of the different formulations were studied to evaluate the plasticizing effect of the MBNO and MHO. With the addition of both plasticizers, a significant increase in ductile properties was observed, reaching an increase in elongation at break of 643% with 7.5 phr MBNO and 771% with 10 phr MHO compared to neat PLA. In addition, it has been observed that the mechanical resistant properties do not decrease, since the oils enhance the crystallization of PLA by increasing the free volume between its chains and counteracting the effect. Finally, a disintegration test was carried out under thermophilic conditions at 58 °C for 27 days, demonstrating that the incorporation of MHO and MBNO does not significantly affect the biodegradability of neat PLA. [ABSTRACT FROM AUTHOR]

In this study, hemp seed oil was reacted with maleic anhydride in an ene reaction to obtain maleinized hemp seed oil (MHO). The use of MHO as a plasticizer and compatibilizer has been studied for polylactic acid (PLA) and thermoplastic starch (TPS) blends (80/20, respectively). By mechanical, thermal and morphological characterizations, the addition of MHO provides a dual effect, acting as plasticizer and compatibilizer between these two partially miscible biopolymers. The addition of MHO up to 7.5 phr (parts by weight of MHO per hundred parts of PLA and TPS) revealed a noticeable increase in the ductile properties, reaching an elongation at break 155% higher than the PLA/TPS blend. Furthermore, contrary to what has been observed with maleinized oils such as linseed oil, the thermal properties do not decrease significantly as a result of the plasticizing effect, due to the compatibilizing behavior of the MHO and the natural antioxidants present in the oil. Finally, a disintegration test was carried out in aerobic conditions at 58 °C, for 24 days, to demonstrate that the incorporation of the MHO, although causing a slight delay, does not impair the biodegradability of the blend, obtaining total degradation in 24 days. [ABSTRACT FROM AUTHOR]

This contribution focuses on the development of flax and flax/basalt hybrid reinforced composites based on epoxidized linseed oil (ELO) resin, exploiting the feasibility of different ratios of glutaric anhydride (GA) to maleinized linseed oil (MLO) in the hardener system (50:0, 40:10 and 30:20 wt.%) to provide crosslinked thermosets with balanced properties. The hybrid laminates have been manufactured by resin transfer molding (RTM) and subjected to dynamic–mechanical (DMA) and thermal gravimetry (TGA) analysis. The presence of glutaric anhydride (GA) resulted in hard and relatively brittle flax and flax/basalt laminates, whose loss moduli decreased as the number of basalt plies diminished. Furthermore, the increase in MLO content in the GA:MLO hardener system shifted the glass transition temperatures (Tg) from 70 °C to 59 and 56 °C, which is representative of a decrease in brittleness of the crosslinked resin. All samples exhibited two stages of their decomposition process irrespective of the MLO content. The latter influenced the residual mass content that increased with the increase of the MLO wt.% from 10 to 30 wt.%, with shifts of the final degradation temperatures from 410 °C to 425 °C and 445 °C, respectively. [ABSTRACT FROM AUTHOR]

This study originally explores the use of naringin (NAR), gallic acid (GA), caffeic acid (CA), and quercetin (QUER) as natural antioxidants for bio-based high-density polyethylene (bio-HDPE). These phenolic compounds are present in various citrus fruits and grapes and can remain in their leaves, peels, pulp, and seeds as by-products or wastes after juice processing. Each natural additive was first melt-mixed at 0.8 parts per hundred resin (phr) of bio-HDPE by extrusion and the resultant pellets were shaped into films by thermo-compression. Although all the phenolic compounds colored the bio-HDPE films, their contact transparency was still preserved. The chemical analyses confirmed the successful inclusion of the phenolic compounds in bio-HDPE, though their interaction with the green polyolefin matrix was low. The mechanical performance of the bio-HDPE films was nearly unaffected by the natural compounds, presenting in all cases a ductile behavior. Interestingly, the phenolic compounds successfully increased the thermo-oxidative stability of bio-HDPE, yielding GA and QUER the highest performance. In particular, using these phenolic compounds, the onset oxidation temperature (OOT) value was improved by 43 and 41.5 °C, respectively. Similarly, the oxidation induction time (OIT) value, determined in isothermal conditions at 210 °C, increased from 4.5 min to approximately 109 and 138 min. Furthermore, the onset degradation temperature in air of bio-HDPE, measured for the 5% of mass loss (T5%), was improved by up to 21 °C after the addition of NAR. Moreover, the GA- and CA-containing bio-HDPE films showed a high antioxidant activity in alcoholic solution due to their favored release capacity, which opens up novel opportunities in active food packaging. The improved antioxidant performance of these phenolic compounds was ascribed to the multiple presence of hydroxyl groups and aromatic heterocyclic rings that provide these molecules with the features to permit the delocalization and the scavenging of free radicals. Therefore, the here-tested phenolic compounds, in particular QUER, can represent a sustainable and cost-effective alternative of synthetic antioxidants in polymer and biopolymer formulations, for which safety and environmental issues have been raised over time. [ABSTRACT FROM AUTHOR]

Simple Summary: Mammalian SWI/SNF complexes regulate gene expression by reorganizing the way DNA is packaged into chromatin. SWI/SNF subunits are recurrently altered in tumors at multiple levels, including DNA mutations as well as alteration of the levels of RNA and protein. Cancer cell lines are often used to study SWI/SNF function, but their patterns of SWI/SNF alterations can be complex. Here, we present a comprehensive characterization of DNA mutations and RNA and protein expression of SWI/SNF members in 38 lung adenocarcinoma (LUAD) cell lines. We show that over 85% of our cell lines harbored at least one alteration in one SWI/SNF subunit. In addition, over 75% of our cell lines lacked expression of at least one SWI/SNF subunit at the protein level. Our catalog will help researchers choose an appropriate cell line model to study SWI/SNF function in LUAD. Mammalian SWI/SNF (SWitch/Sucrose Non-Fermentable) complexes are ATP-dependent chromatin remodelers whose subunits have emerged among the most frequently mutated genes in cancer. Studying SWI/SNF function in cancer cell line models has unveiled vulnerabilities in SWI/SNF-mutant tumors that can lead to the discovery of new therapeutic drugs. However, choosing an appropriate cancer cell line model for SWI/SNF functional studies can be challenging because SWI/SNF subunits are frequently altered in cancer by various mechanisms, including genetic alterations and post-transcriptional mechanisms. In this work, we combined genomic, transcriptomic, and proteomic approaches to study the mutational status and the expression levels of the SWI/SNF subunits in a panel of 38 lung adenocarcinoma (LUAD) cell lines. We found that the SWI/SNF complex was mutated in more than 76% of our LUAD cell lines and there was a high variability in the expression of the different SWI/SNF subunits. These results underline the importance of the SWI/SNF complex as a tumor suppressor in LUAD and the difficulties in defining altered and unaltered cell models for the SWI/SNF complex. These findings will assist researchers in choosing the most suitable cellular models for their studies of SWI/SNF to bring all of its potential to the development of novel therapeutic applications. [ABSTRACT FROM AUTHOR]

During academic activities, adolescents must manage both the internal distraction of mind-wandering and the external distraction of digital media. Attention training has emerged as a promising strategy for minimizing these distractions, but scalable interventions that can deliver effective attention training in high schools are still needed. The present investigation used a one-group pre-post design to examine the feasibility and outcomes of a digital attention training course at a public high school. The intervention was delivered with reasonably strong fidelity of implementation, with students completing 92% of the lessons and 79% of the daily exercises. At baseline, students reported mind-wandering more frequently during class than they multitasked, and mind-wandering was more negatively correlated with classroom focus. From pre-test to post-test (n = 229), students reported improved emotional regulation and reduced mind-wandering during daily life. Among the 76% of students who felt they paid attention in class less than they should, classroom focus improved significantly. During class, these students reported significantly less mind-wandering but slightly greater digital multitasking. During homework, they reported significantly less digital multitasking but only marginally reduced mind-wandering. Collectively, these results suggest that online interventions could be a scalable way of providing attention training in high schools, but that future work must consider the role of both mind-wandering and digital multitasking. [ABSTRACT FROM AUTHOR]

In this study, different compatibilizing agents were used to analyze their influence on immiscible blends of polylactide (PLA) and biobased high-density polyethylene (bioPE) 80/20 (wt/wt). The compatibilizing agents used were polyethylene vinyl acetate (EVA) with a content of 33% of vinyl acetate, polyvinyl alcohol (PVA), and dicumyl peroxide (DPC). The influence of each compatibilizing agent on the mechanical, thermal, and microstructural properties of the PLA-bioPE blend was studied using different microscopic techniques (i.e., field emission electron microscopy (FESEM), transmission electron microscopy (TEM), and atomic force microscopy with PeakForce quantitative nanomechanical mapping (AFM-QNM)). Compatibilized PLA-bioPE blends showed an improvement in the ductile properties, with EVA being the compatibilizer that provided the highest elongation at break and the highest impact-absorbed energy (Charpy test). In addition, it was observed by means of the different microscopic techniques that the typical droplet-like structure is maintained, but the use of compatibilizers decreases the dimensions of the dispersed droplets, leading to improved interfacial adhesion, being more pronounced in the case of the EVA compatibilizer. Furthermore, the incorporation of the compatibilizers caused a very marked decrease in the crystallinity of the immiscible PLA-bioPE blend. [ABSTRACT FROM AUTHOR]

In this work, films of polylactide (PLA) prepared by extrusion and thermo-compression were plasticized with oligomer of lactic acid (OLA) at contents of 5, 10, and 20 wt%. The PLA sample containing 20 wt% of OLA was also reinforced with 3, 6, and 9 parts per hundred resin (phr) of halloysite nanotubes (HNTs) to increase the mechanical strength and thermal stability of the films. Prior to melt mixing, ultrasound-assisted dispersion of the nanoclays in OLA was carried out at 100 °C to promote the HNTs dispersion in PLA and the resultant films were characterized with the aim to ascertain their potential in food packaging. It was observed that either the individual addition of OLA or combined with 3 phr of HNTs did not significantly affect the optical properties of the PLA films, whereas higher nanoclay contents reduced lightness and induced certain green and blue tonalities. The addition of 20 wt% of OLA increased ductility of the PLA film by nearly 75% and also decreased the glass transition temperature (Tg) by over 18 °C. The incorporation of 3 phr of HNTs into the OLA-containing PLA films delayed thermal degradation by 7 °C and additionally reduced the permeabilities to water and limonene vapors by approximately 8% and 47%, respectively. Interestingly, the highest barrier performance was attained for the unfilled PLA film plasticized with 10 wt% of OLA, which was attributed to a crystallinity increase and an effect of "antiplasticization". However, loadings of 6 and 9 phr of HNTs resulted in the formation of small aggregates that impaired the performance of the blend films. The here-attained results demonstrates that the properties of ternary systems of PLA/OLA/HNTs can be tuned when the plasticizer and nanofiller contents are carefully chosen and the resultant nanocomposite films can be proposed as a bio-sourced alternative for compostable packaging applications. [ABSTRACT FROM AUTHOR]

The effect of ultraviolet radiation on styrene-ethylene-butadiene-styrene (SEBS) has been studied at different exposures times in order to obtain a better understanding of the mechanism of ageing. The polymer materials were mechanically tested and then their surfaces were analyzed using a scanning electron microscope (SEM) and atomic force microscopy (AFM). Moreover, the optical analysis of contact angle (OCA) was used to evaluate the surface energy (γs) and the yellowing index (YI) and attenuated total reflectance infrared spectroscopy (ATR–FTIR) were used to observe structural and physical changes in aging SEBS. The results obtained for the SEBS, in relation to the duration of exposure, showed superficial changes that cause a decrease in the surface energy (γs) and, therefore, a decrease in surface roughness. This led to a reduction in mechanical performance, decreasing the tensile strength by about 50% for exposure times of around 200 hours. [ABSTRACT FROM AUTHOR]

Water quality assessments provide essential information for protecting aquatic habitats and stakeholders downstream of mining sites. Moreover, mining companies must comply with environmental quality standards and include public participation in water quality monitoring (WQM) practices. However, overarching challenges beyond corporate environmental responsibility are the scientific soundness, political relevance and harmonization of WQM practices. In this study, a mountainous watershed supporting large-scale gold mining in the headwaters, besides urban and agricultural landuses at lower altitudes, is assessed in the dry season. Conventional physicochemical and biological (Biological Monitoring Water Party-Colombia index) freshwater quality parameters were evaluated, including hydromorphological and land-use characteristics. According to the indicators used, water quality deterioration by mining was absent, in contrast to the effects of urban economic activities, hydromorphological alterations and (less important) agricultural pollutants. We argue that mining impacts are hardly captured due to the limited ecological knowledge of high-mountain freshwaters, including uncharacterized mining-specific bioindicators, environmental baselines and groundwater processes, as well as ecotoxicological and microbial freshwater quality components. Lessons for overcoming scientific and operational challenges are drawn from joint efforts among governments, academia and green economy competitiveness. Facing a rapid development of extractive industries, interinstitutional and multidisciplinary collaborations are urgently needed to implement more integrated freshwater quality indicators of complex mining impacts. [ABSTRACT FROM AUTHOR]

The possibility of using a set of unequal electrodes, within limits, in a Wenner arrangement for the measurement of apparent resistivity at small depths is explored in this paper. A procedure in which only a simple preliminary calibration is necessary to obtain the best measurements of the apparent resistivity is proposed. On the basis of some case studies, a comparison with the usual procedures to obtain the apparent resistivity from resistance measurements is carried out. The results showed that when an unequal set of electrodes was used, the procedure proposed here was the only one that guaranteed the best apparent resistivity values for any value of electrode separation in the Wenner arrangement, especially for those associated with small depths. [ABSTRACT FROM AUTHOR]

Highly environmentally-friendly fibreboards were manufactured by hot-press moulding using Posidonia ocaeanica wastes and a partially biobased epoxy resin as binder. Fibreboards with a constant fibre content of 70 wt % were successfully manufactured by thermo-compression. The effects of a conventional alkali treatment were compared to the synergistic effects that additional silanization with two silanes (amino and glycidyl) can exert on the mechanical and thermo-mechanical properties of fibreboards. The results revealed a remarkable improvement of the mechanical properties with the combination of the alkali treatment followed by the silanization. Scanning electron microscopy also revealed increased resin-fibre interactions due to the synergistic effect of both amino- and glycidyl-silanes. These fibreboards represent a formaldehyde-free solution and can positively contribute to sustainable development as the lignocellulosic component is a waste and the binder resin is partially biobased., Competing Interests: The authors declare no conflict of interest.