Search

Carao honey is a potential functional ingredient that can generate added value to food products enriched by reducing waste. In many countries, carao has been utilized for therapeutic purposes since this type of plant extract can inhibit the growth against the most common dermatophytes, a pathogenic fungus that grows on the skin, mucous membranes, hair, nails, feathers, and other body surfaces, causing ringworm and related diseases. The physicochemical characteristics of the cookies were also investigated, which included aW, proximate analysis, hardness, and color. A sensory study was carried out to determine the rejection threshold, acceptability, purchase intent, and general taste of 90 consumers. The gluten-free cookies were prepared with carao honey as a partial substitute for rice flour in different percentages (0%, 2.5%, 5%, and 10%). The carao honey proximate composition, rheological properties, and pasting properties were analyzed. It was emphasized that incorporating carao honey into cookies improves the ingredient's sustainability. The impact of carao on the physicochemical and sensory properties of cookies was evident in color, flavor, and smell. According to the results, only samples with 2.5% carao were accepted regarding flavor and smell. Overall, liking scores, age, and flavor were the most significant predictors of purchase intent. The information given to panelists did not significantly (p < 0.05) influence liking scores only for cookies. According to physicochemical analysis, carao honey flour was high in carbohydrates (88%). The incorporation of carao produced cookies with darker colors and a softer texture. The study demonstrated that carao flour could be included to produce sensorial accepted cookies at a 2.5% addition level as an alternative in the food industry that benefits from environmental sustainability and, at the nutritional level, improves the availability of nutrients, mainly sugars and proteins. [ABSTRACT FROM AUTHOR]

Dietary fiber incorporation in bread offers potential health benefits but poses challenges due to its impact on dough rheology and bread quality. This study evaluated the effects of pea, cocoa, and apple fiber on wheat-based dough and bread properties using rheological methods (farinograph, alveograph, pasting, and proofing) and baking trials. Substituting flour with fiber at 1%, 5%, or 10% increased water absorption and affected dough development, stability, and extensibility, particularly at high fiber concentrations. Pasting properties showed varying gelatinization behaviors influenced by fiber type and concentration. Principal component analysis (PCA) highlighted the clustering of dough and bread characteristics based on fiber concentration and type. At low fiber concentrations (up to 5% of flour replacement), negative effects were minimal, suggesting no need for comprehensive compositional analysis. However, high fiber concentrations (10%) introduced significant variability and complexity in dough properties. New farinographic parameters (FU4, FU6, FU8, FU10, and FU12) improved the explanatory power of PCA, enhancing the understanding of fiber-rich dough dynamics. The significant alterations in moisture content and texture underscore the intricate relationship between type of fiber, concentration, and dough functionality. Optimizing rheological parameters for fiber-enriched flour is crucial for adapting the bread-making process to produce high-quality bread with desired characteristics and enhanced nutritional benefits. [ABSTRACT FROM AUTHOR]

The effects of lophatherum gracile brongn flavonoids on the multiscale structure and functional properties of wheat dough were investigated. Wheat dough samples with varying contents of lophatherum gracile brongn flavonoids were analyzed to assess changes in thermal-mechanical rheological properties, microstructure, chemical interactions, water distribution, and macropolymer formation by Mixolab mixer, fluorescence microscopy, and low-field nuclear magnetic resonance (LF-NMR). The findings revealed that lophatherum gracile brongn flavonoids disrupted the three-dimensional network of gluten proteins in the wheat dough, leading to decreased water-binding capacity and reduced gluten protein crosslinking while enhancing thermal stability and inhibiting the starch retrogradation of the dough. This study provided important insights into the interaction mechanisms between lophatherum gracile brongn flavonoids and the proteins/starch in wheat dough, offering theoretical guidance for the development of novel wheat-based products for industrialization and practical production. [ABSTRACT FROM AUTHOR]

The maturation of wheat flour is a transformative process that elevates its processing and culinary attributes to their peak performance levels. Despite extensive research on starch and gluten protein modifications, the impact of lipid changes has been largely unexplored. This study addresses this gap by examining the maturation of freshly milled wheat flour at 15 °C, 25 °C, and 40 °C over 60 days, focusing on enzymatic activities—lipase, lipoxidase, and catalase—and lipid metabolites, including free fatty acids, conjugated trienes, p-anisidine value, and total oxidation value. The results of this study showed that free fatty acids continued to increase at all temperatures, with the most significant increase of 50% at 15 °C. The p-anisidine value followed a pattern of initial increase followed by a decline, while conjugated trienes were markedly higher at 40 °C, suggesting temperature's significant influence on lipid peroxidation. Notably, total oxidation values became erratic post 30 days, indicating a shift in oxidative dynamics. This study underscores the correlation between lipid metabolites and enzymatic activities, revealing the enzymes' pivotal role in lipid oxidation. The interplay of temperature and time offers valuable insights for optimizing wheat flour maturation, ensuring superior quality for various applications. [ABSTRACT FROM AUTHOR]

The demand for meat alternatives in different forms is increasing due to consumers' awareness of climate change and the health benefits of plant-based ingredients compared to animals. However, current alternatives on the market do not fulfil consumers' acceptance for taste and texture. Hence, different physical and biological processes, such as thermal treatment and fermentation, need to be investigated. This study reveals that the thermal treatment of legume flours (soy, pea and lentil) prior to single-strain fermentation with Leuconostoc citreum TR116 has a major impact on acidification, colour, texture and sensory properties due to the pregelatinisation of starch and denaturation of proteins. The thermal treatment of soy flour resulted in liquification, and it could not be used as a fermentation substrate. However, non-heat-treated soy flour was fermented for comparison. The highest total titratable acidity (TTA) was determined in fermented pea flour (PF) and fermented lentil flour (LF) after 48 h with 24.35 ± 0.29 mL 0.1 M NaOH/10 g and 24.98 ± 0.33 mL 0.1 M NaOH/10 g, respectively. Heat treatment prior to fermentation led to a reduction in TTA by 20 mL 0.1 M NaOH/10 g for both PF and LF. The loss of colour pigments during thermal treatment led to a lighter colour of the spreadable alternatives. Moreover, a harder texture (+13.76 N in LF; +15.13 N in PF) and a lower adhesiveness (−0.88 N in LF; −0.43 N in PF) were detected in spreadable meat alternatives that were treated with heat prior to fermentation. Cohesiveness was decreased by thermal treatment, and fermentation did not impact it. Fermentation without pre-heat treatment increased adhesiveness by 4.37 N in LF and by 2.36 N in PF—an attribute typical for spreadable meat. Descriptive sensory analysis showed that thermal treatment significantly decreased bitterness but increased crumbliness and reduced juiciness. On the other hand, fermentation without pre-heat treatment mainly influenced flavour by increasing fruitiness and decreasing beaniness, earthiness and off-flavours. In summary, thermal treatment prior to fermentation is powerful in reducing legume-typical off-flavours but is not suitable for the development of spreadable meat alternatives due to texture changes. However, this process can be very beneficial when producing sausage-like alternatives. [ABSTRACT FROM AUTHOR]

The genus Mucuna is a potential protein source, but it has been underutilized due to the presence of antinutritional factors, especially L-DOPA. Solid-state fermentation with lactic acid bacteria could be an effective and simple method for reducing these antinutritional factors while simultaneously enriching the protein content. In this work, an experimental analysis identified the variables with the greatest influence on the solid-state fermentation of Mucuna deeringiana. In general, we observed a decrease in pH due to the production of and increase in lactic acid, resulting in a 91% (6.40 to 0.55 g/100 g sample) reduction in L-DOPA, 51% decrease in phenolic compounds (11.65 to 5.70 g/100 g sample), 97% decrease in tannins (1.26 to 0.04 g/100 g sample), and the antioxidant capacity of the fermented flour was 97%, with an increase in protein content of 12%. Furthermore, it demonstrated greater stability over 24 days compared to the control samples, which remained stable for only 3 days. These results suggest that the bacterium has a positive effect on the production of lactic acid, and the nutritional composition can be enhanced by reducing antinutritional factors, especially L-DOPA, that limit the use of this legume. This process proves to be a cost-effective and sustainable method for developing nutritious feed products derived from Mucuna flours. [ABSTRACT FROM AUTHOR]

This study aimed to explore the potential use of Aleppo pine seed flour as a nutritious ingredient in biscuit production. Aleppo pine seed flour was blended with wheat flour to create biscuits with varying proportions: 15%, 30%, and 45% Aleppo pine seed flour. The analysis of the chemical composition of the biscuits revealed that increasing the proportion of Aleppo pine seed flour led to higher levels of protein, fat, and ash, while the carbohydrate content decreased. Sensory evaluation showed that biscuits with 15% Aleppo pine seed flour and 85% wheat flour had favorable characteristics in terms of color, flavor, crispness, and overall appeal. These findings indicate that incorporating Aleppo pine seed flour into wheat flour can enhance the nutritional profile of biscuits, offering higher protein, fat, and mineral content. The study suggests that a blend containing 15% Aleppo pine seed flour is optimal for producing biscuits with desirable sensory properties, making it a promising alternative ingredient for healthier biscuit formulations. Overall, this research highlights the potential of Aleppo pine seed flour to improve the nutritional quality of biscuits without compromising their sensory qualities, paving the way for its use in health-conscious baking practices. [ABSTRACT FROM AUTHOR]

Chlorination is a common chemical modification process of soft wheat flour to prepare high-ratio cakes. Due to safety and labeling concerns of flour chlorination, alternatives to chlorination have been researched. Atmospheric Cold Plasma (ACP) is an emerging technology which is applicable for a wide range of food and biological components, including cereal grain products. The potential of ACP as an alternative to chlorination for high-ratio cakes has not been researched. Soft wheat flour was treated at 50 kV, 60 kV, and 70 kV each for 5, 6, and 7 min and compared to untreated and chlorinated wheat flour. High-ratio cakes were prepared from the chlorinated, treated, and untreated soft wheat flour and their properties were compared. Changes in the flour properties and the high-ratio cakes were observed at different treatment conditions. It was found that after 50 kV, 6 min, 50 kV, 7 min and 60 kV, 6 min had the better flour pasting properties, higher cake volume, and better texture properties as compared to untreated wheat flour and chlorinated wheat flour. This determines the potential of the application of ACP as an alternative to chlorination or to reduce the use of chlorination in soft wheat flour. [ABSTRACT FROM AUTHOR]

High nutritional value and antioxidant properties make chickpea flour a valuable substitute for wheat flour, although its texture-forming abilities are different. The aim of this study was to investigate the possibility of increasing the content of bioactive compounds and antioxidant properties of shortbread cookies by simple partial or complete replacement of wheat flour with chickpea flour without considerable changes in texture, color, sensory properties, or acceptability. Shortbread cookies were made from wheat flour (0% of chickpea flour), wheat flour and chickpea flour (replacement of 25%, 50%, and 75%), and chickpea flour (100%). Generally, the increase in chickpea flour share resulted in an increase in protein, fat, and ash content, as well as antioxidant properties. Polyphenol content, flavonoid content, and antioxidant activities increased three- to sixfold in shortbread cookies containing chickpea flour in comparison to wheat cookies. The level of proteins increased about 50% and the antioxidant properties were three to six times higher than in wheat cookies. Cookies containing up to 75% chickpea flour were assessed as very good or good quality, while only cookies without wheat flour were assessed as sufficient quality. It could be concluded that part of the wheat flour content in shortbread cookies can be replaced by chickpea flour. Application of a 25% proportion of chickpea flour increases physicochemical properties without changes in sensory properties. Sensory quality was up to 75% lower, but antioxidant properties were increased. However, complete replacement of wheat flour in shortbread cookies without changing the recipe resulted in a product of slightly lower sensory quality. [ABSTRACT FROM AUTHOR]

The use of native and malted triticale (MT) flour in dry pasta has been limited despite the potential of triticale in cereal-based food production. In this study, triticale-based dry spaghetti with increasing levels of substitution (0, 25, 50, and 75 g/100 g w/w) of MT flour were formulated and analyzed. Samples were analyzed for technological and nutritional traits, including the in vitro starch and protein digestions. The gradual substitution of native triticale flour with MT increased (p < 0.05) the total dietary fiber content, whereas total starch decreased (p < 0.05). Adding MT flour increased the cooking loss and the stickiness of cooked pasta (p < 0.05). Using MT flour modulated the in vitro starch digestion, lowering the slowly digestible and resistant starch contents. The in vitro protein digestibility was positively affected using MT at the highest substitution level. Overall, MT could be used to formulate dry pasta products being the substitution to native triticale up to 50 g/100 g, a good compromise between nutritional quality and technological characteristics. [ABSTRACT FROM AUTHOR]

The purpose of this paper is to evaluate from a nutritional, phytochemical, and rheological point of view different varieties/lines of oats cultivated in Romania. In this sense, the proximate composition (proteins, lipids, mineral substances, starch, and carbohydrates), the total polyphenols content (TPC) of individual polyphenols and macro and microelements of 20 oat varieties/lines were determined. In order to evaluate the potential for use in the flour industry (pasta, bread, and biscuits)., a variety of oats with optimal nutritional properties and active principles was used to obtain oat/wheat composite flours in different proportions (10–30% oat flour) and subjected to rheological analysis using the Chopin Mixolab test (Chopin Technologies, Paris, France) The results showed a protein content between 14.36–17.08%, lipid content between 6.01–9.03%, starch between 44.13–52.95%, total mineral substances between 0.93–1.65%, carbohydrates between 65.16–69.32% and energy value between 389.81–409.86 kcal/100 g. The TPC content varied between 614.76–1244.58 µgGAE/g, and the average values of individual polyphenols were between 1.87 μg/g (rosmarinic acid) and 28.18 μg/g (gallic acid). Regarding the macroelements content, potassium (K) was the major element (203.19 μg/g), followed by calcium (Ca) (181.71 μg/g) and magnesium (Mg) (105.79 μg/g). The level of microelements varied between 3.02 μg/g for nickel (Ni) and 60.25 μg/g for iron (Fe). Multivariate data analysis PCA was used to correlate the obtained data. The rheological analysis using the MIXOLAB system proved that, from the point of view of technological properties, composite flours from a mixture of 10–30% oat and wheat flour are the best for obtaining biscuit dough, compared to pasta or pan bread. Following the study and based on nutritional, phytochemical and rheological results, line 2511 was selected as optimal for use in obtaining hypoglycemic flour foods for people with diabetes. [ABSTRACT FROM AUTHOR]

This document is an editorial from the journal Foods, discussing the Special Issue "Novel Food and Beverages: Production and Characterization." The Special Issue focuses on the evaluation of novel food from a rheological perspective, covering topics such as food safety, sustainability, process engineering, and sensory issues. The editorial provides an overview of the published articles in the Special Issue, summarizing the key findings of each study. The document concludes by highlighting the importance of maintaining a healthy diet and the need for alternative food sources to meet the growing global population's demand for nutritious and safe food. [Extracted from the article]

This document is a summary of a journal article titled "Processing and Utilization Technology of Root and Tuber Food" published in the journal Foods. The article discusses the importance of root and tuber crops, such as cocoyam, potato, sweet potato, yams, and cassava, as staple foods and sources of dietary carbohydrates. It highlights the steady increase in production and plant areas of these crops and their potential benefits in terms of food quality and nutrition. The article also explores the processing and utilization of root and tuber crops, including the modification of starches and the development of composite flours. It presents several studies on the properties and applications of starch-based products and composite flours derived from different root and tuber crops. The article concludes by emphasizing the need for further research and development in this field to meet consumer demands and promote the consumption of novel products with nutritional functions. [Extracted from the article]

Amylase activity in rye flour plays a crucial role in the production of rye bread. When preparing a scald in rye bread production, diastatic rye malt is utilized to augment the amylase activity of the rye flour. This study investigated the effects of the diastatic power (DP) and concentration of rye malt on the Falling Number (FN) and the rheological properties of rye flour. Additionally, it examined reducing sugars in the scalding process and fermentation. Mixolab results provided comprehensive data on dough properties at different temperature stages, highlighting significant changes in starch gelatinization and enzyme activity due to varying malt diastatic power and concentrations. The decline in the gelatinization index (C3-C2) indicated faster starch gelatinization with increased diastatic power. Adding rye malt significantly increased maltose content in the saccharified and fermented scald, promoting a favorable environment for lactic acid bacteria and yeasts. FN and Amylograph results showed that less active malt (DP 170, 179 °WK), at a 1.5% concentration, could achieve similar effects as the more active malt (DP 362, 408 °WK) at 0.5%. Adding rye malt to rye flour allows for the regulation of the flour's rheological properties and FN, adjustable based on malt DP and concentration. [ABSTRACT FROM AUTHOR]

Modifying starch allows for improvements in its properties to enable improved uses in food matrices, bioplastics, and encapsulating agents. In this research, four varieties of native potato starch were modified by acid treatment, enzymatic treatment, and ethanol precipitation, and their physicochemical, structural, thermal, and techno-functional characteristics were analyzed. According to FT-IR analysis, no influence of the modified starches on the chemical groups was observed, and by scanning electron microscopy (SEM), spherical and oval shapes were observed in the acid and enzymatic treatments, with particle sizes between 27 and 36 μm. In particular, the ethanolic precipitation treatment yielded a different morphology with a particle size between 10.9 and 476.3 nm, resulting in a significant decrease in gelatinization temperature (DSC) and more pronounced crystallites (XRD). On the other hand, the enzymatic treatment showed higher values for z-potential (ζ), and the acid treatment showed lower mass loss (TGA). Acid and ethanolic treatments affected the dough properties compared to native starches. The techno-functional properties showed a decrease in the water absorption index, an increase in the water solubility index, and varied swelling power behaviors. In conclusion, the modification of potato starches through acid, enzymatic, and ethanolic precipitation treatments alters their physicochemical properties, such as swelling capacity, viscosity, and thermal stability. This in turn affects their molecular structure, modifying morphology and the ability to form gels, which expands their applications in the food industry to improve textures, stabilize emulsions, and thicken products. Furthermore, these modifications also open new opportunities for the development of bioplastics by improving the biodegradability and mechanical properties of starch-based plastic materials. [ABSTRACT FROM AUTHOR]

Buriti oil (Mauritia flexuosa L.) is rich in carotenoids, mainly β-carotene, and has great value for application as a food, pharmaceutical, or cosmetic ingredient, as well as a natural pigment. Microencapsulation is a promising technique to protect compounds sensitive to degradation such as β-carotene. Materials composed of carbohydrates and proteins, such as azuki bean (Vigna angularis L.) and lima bean (Phaseolus lunatus L.) flours, are alternative matrices for microencapsulation, which additionally provide good amounts of nutrients. In combination with maltodextrin, the flours represent a protective barrier in stabilizing lipophilic compounds such as buriti oil for subsequent spray drying. In this work, the performance of mixtures of maltodextrin with whole azuki and lima bean flours was evaluated in the microencapsulation of buriti oil. The microcapsules showed good results for solubility (>80%), hygroscopicity (~7%), encapsulation efficiency (43.52 to 51.94%), and carotenoid retention (64.13 to 77.49%.) After 77 days of storage, the microcapsules produced maintained 87.79% and 90.16% of carotenoids, indicating that the powders have high potential for application as encapsulants in the food and pharmaceutical industries. [ABSTRACT FROM AUTHOR]

An automated package for calculating the best calibration model for matrix-matched calibration in food pesticide analysis has been developed in this study. The algorithm development in the package is based on three requirements for routine food pesticide analysis: a good working range fitness for samples with high maximum residue limits (MRLs), detection capability for pesticide analysis with MRLs close to the limit of quantitation, and a simple working range problem detection model. The requirements are combined in a simple scoring system above 100. The package has been tested in the analysis of pesticides of pepper and wheat flour. The results show that the package can be used for different pesticides quickly and visually, and also allows evaluation of matrix effects between different matrix calibrations. For the pesticides tested with the package, the weighted linear calibration gave the best score over the simple linear calibration and second-order calibration. [ABSTRACT FROM AUTHOR]

An overproducing date fruit with limited industrial utilization leads to significant waste and losses, especially in the early stage of date maturity known as bisr. This study aimed to investigate the potential use of bisr date powder (BDP) at different concentrations (25%, 50%, and 100%) as a natural sweetener instead of sugar and barley flour as a source of dietary fiber, vitamins, and minerals instead of wheat flour (50%) in biscuit production over storage periods of 7, 14, and 21 days. The analysis revealed that the bisr Al-Khalas powder sample had a moisture content of 11.84%, ash content of 2.30%, and crude fiber content of 10.20%. Additionally, it had a low protein (2.50%) and fat (0.77%) content, with total carbohydrates at 82.59%. The gradual substitution of bisr Al-Khalas in biscuit production resulted in an increased moisture, ash, fat, protein, crude fiber, and iron content, as well as a decrease in total carbohydrate percentage. A chemical analysis of bisr Al-Khalas powder demonstrated high levels of antioxidants, with 248.49 mg gallic acid/g of phenolic compounds, 31.03 mg quercetin/g of flavonoids, and an antioxidant activity ranging from 42.30%, as shown by the DPPH test. The peroxide content was 0.009 mg equivalent/kg. Biscuit samples with different proportions of bisr Al-Khalas showed an improved resistance to oxidation compared to samples without bisr Al-Khalas, with increased resistance as the percentage of replacement increased during storage. Physical properties such as the diameter, height, and spread percentage, as well as organoleptic properties like color, flavor, aroma, and taste, were significantly enhanced with higher levels of bisr Al-Khalas in the mixture. Biscuit samples fortified with 100% pure bisr Al-Khalas powder were found to be less acceptable, while samples with a 25% substitution did not negatively impact sensory properties. In addition, acrylamide and hydroxymethylfurfural (HMF) were not detected in bisr powder and biscuit samples prepared at different concentrations (25%, 50%, and 100%). In conclusion, the study suggests that bisr Al-Khalas powder, an underutilized waste product, has the potential to add value to commercial biscuit production due to its high nutritional value and extended storage period resulting from its potent antioxidant activity. [ABSTRACT FROM AUTHOR]

Pancakes prepared with sorghum flour possess a high nutritional value, yet their quality is unstable and prone to degradation during storage. This instability can be attributed to the particle size of coarse cereal powder, which significantly influences the quality of flour products during storage. In this study, changes in the quality of these pancakes, prepared with varying particle sizes of sorghum flour, were meticulously analyzed during cold storage using advanced instruments such as a texture analyzer, nuclear magnetic resonance spectrometer, differential scanning calorimeter, X-ray diffractometer, and Fourier transform infrared spectrometer. Findings revealed that the hardness of leavened pancakes significantly increased over time. After a refrigeration period of 7 days, the hardness of wheat flour leavened pancakes increased by 56.60%. However, with a decrease in the particle size of sorghum flour, the increase in hardness diminished, thereby delaying the aging process of the pancakes. As the storage duration was extended, moisture migration within the pancakes occurred, and the sorghum flour pancakes with a smaller particle size exhibited a reduced moisture change rate, indicating an enhanced water holding capacity. In comparison to their wheat flour counterparts, sorghum flour leavened pancakes exhibited a substantial reduction in retrogradation enthalpy and crystallinity. The inclusion of sorghum flour effectively inhibited amylopectin recrystallization, thus slowing down the aging process of the pancakes. This inhibitory effect was more evident with decreasing sorghum flour particle sizes. Fourier transform infrared data indicated no significant alterations in absorption peaks across various wavelengths during cold storage. Although starch short-range orderliness increased with storage time, the use of sorghum flour with smaller particles reduced the degree of short–range orderliness in starch molecules throughout the cold storage period. Sorghum flour with a smaller particle size can inhibit water migration and amylopectin recrystallization, which subsequently delays pancake aging and enhances its quality stability during storage. [ABSTRACT FROM AUTHOR]

This research assessed the feasibility of adding Cochayuyo seaweed flour (at 30, 50, and 70% levels) to rice flour-based paste to improve its 3D printing quality. The paste's rheological properties, printing quality, texture profile, thermal properties, and color of 3D-printed foods were explored. Results showed that pastes with Cochayuyo addition exhibited shear-thinning behavior, and viscosity increased with increased Cochayuyo concentration. Viscoelastic properties and a Texture Profile Analysis (TPA) revealed that Cochayuyo improved mechanical strength and made the paste easier to flow, improving printed food's extrudability, fidelity, and shape retention, which was better observed in RC50 and RC70 printed at 15 mm s−1. A differential scanning calorimetry (DSC) analysis showed a partial substitution of rice flour for Cochayuyo flour in the formulation. This increased the onset and melting peak temperatures and reduced the enthalpy of fusion. CIE color parameters a*, b*, and L* showed that Cochayuyo addition increased the color to yellow and red; however, lightness was considerably reduced. Therefore, Cochayuyo flour could have the potential to be used for the manufacture improvement of 3D-printed food with better rheological, mechanical, thermal, printing quality, and nutritional properties, making possible the exploitation of the native Cochayuyo seaweed, which is highly available in Chile. [ABSTRACT FROM AUTHOR]

In the current study, the prebiotic potential of an innovative functional pasta enriched with 12% (w/w) inulin was investigated. To this aim, pasta was subjected to in vitro gastrointestinal digestion followed by simulated gut fermentation compared to the control pasta (CTRL) not containing inulin. The incorporation of inulin positively (p < 0.05) affected some organoleptic traits and the cooking quality of the final product, giving an overall score significantly higher than CTRL. The resultant essential amino acid content was similar in both pasta samples while the total protein content was lower in inulin-enriched pasta for the polymer substitution to durum wheat flour. The prebiotic potential of chicory inulin was preliminarily tested in in vitro experiments using seven probiotic strains and among them Lacticaseibacillus paracasei IMPC2.1 was selected for the simulated gut fermentation studies. The positive prebiotic activity score registered with the probiotic strain suggested the suitability of the inulin-enriched pasta with respect to acting as a prebiotic source favoring the growth of the probiotic strain and short chain fatty acid (SCFA) production. The present study contributes to broadening knowledge on the prebiotic efficacy of inulin when incorporated into a complex food matrix. [ABSTRACT FROM AUTHOR]

The study analyzed the effect of nitrogen (N) management and different sowing parameters of winter wheat on the flour quality, rheological properties of flour, and bread quality. Flour was obtained from winter wheat grain produced during a field experiment conducted in 2018–2021. The experiment involved three factors: (i) the sowing date (early (3–6 September), delayed by 14 days, and delayed by 28 days), (ii) sowing density (200, 300, and 400 live grains m−2), and (iii) split application of N fertilizer in spring (40 + 100, 70 + 70, and 100 + 40 kg ha−1 in the full tillering stage and the first node stage, respectively). A 28-day delay in sowing increased the total protein content of the flour, water absorption capacity of the flour, dough development time and stability, and degree of softening. When sowing was delayed by 14 or 28 days, the crumb density decreased without affecting the loaf volume. A sowing density of 400 grains m−2 had a positive impact on the flour color, dough stability, and loaf volume. The flour color and dough stability were enhanced when N was applied at 100 + 40 kg ha−1, respectively. In turn, the total protein content of flour peaked when it was applied at 40 + 100 kg N ha−1. The quality of flour improved when winter wheat was sown at a density of 400 live grains m−2 with a delay of 14 or 28 days and supplied with 100 kg N ha−1 in the full tillering stage and 40 kg N ha−1 in the first node stage. [ABSTRACT FROM AUTHOR]

In this study, our research aim was to assess the influence of pumpkin seed flour addition on the antioxidant properties, consumer acceptability, functional properties, and texture of wafers. The in vitro gastrointestinal digestion process was used to assess the effectiveness of fortification in terms of the potential bioavailability of phenolic compounds and peptides. The antioxidant activity of the obtained hydrolysates and potentially bioavailable fractions (≤3.5 kDa) was tested. The highest antiradical activity and Fe2+ chelation ability (IC50) were noted for the fraction obtained from wafers with the greatest addition of pumpkin seed flour—Pf4 (0.49 mg/mL for ABTS+*, 3.84 mg/mL for DPPH*, and 2.04 mg/mL for Fe2+ chelation). The addition of pumpkin seed flour caused the color of the wafers to change to a darker one (24.46% differences in L* between C and P4), which influenced consumer ratings. This study shows that adding pumpkin seed flour increases the peptide and phenolic contents of wafers (1.13 mg/mL and 1.01 mg/mL of peptides and 0.429 mg/mL and 0.351 mg/mL of phenolics for P4 and C hydrolysates, respectively) and enhances their antioxidant activity, with only minimal effects on taste, aroma, crispness, water and fat adsorption capacity, and foaming ability. Fractions ≤ 3.5 kDa showed greater antioxidative activity than hydrolysates, and the addition of pumpkin seed flour improved these properties. To sum up, pumpkin seeds are a valuable source of antioxidant compounds (phenolic compounds and peptides) and can be used to enrich various products. [ABSTRACT FROM AUTHOR]

People of all age groups consume cookies every day. Consumers' preferences for cookies supplemented with functional plant raw materials have recently increased. Therefore, this research aimed to investigate the influence of a mulberry leaf additive on the proximate and mineral compositions, total phenolic and total chlorophyll content, antioxidant activity, and the hardness and color properties of butter cookies. Wheat and rice flour butter cookies were prepared by replacing the flour with mulberry leaf powder at 0, 4, 8, and 12% (w/w). The results revealed that the investigated chemical and physical characteristics of butter cookies depend on the flour used (rice or wheat) and the addition of mulberry leaf powder. Wheat and rice flour cookies with 12% mulberry leaf powder had the significantly highest contents of fiber (20.34 and 20.23%, respectively), ash (1.73 and 1.75%, respectively), K (170.22 and 160.22 mg 100 g−1, respectively), and Ca (170.45 and 160.68 mg 100 g−1, respectively). The rice flour cookies enriched with 12% leaf powder had the greatest amounts of total phenolics (1.48 mg 100 g−1), Zn (12.25 mg kg−1), Mn (6.28 mg kg−1), Cu (1.95 mg kg−1), and antioxidant activity (67.98%). However, the wheat cookies without mulberry leaf powder contained the most B (9.12 mg kg−1), while the no-added rice cookies contained the most Fe (14.30 mg kg−1). Replacing flour with leaf powder increased the cookies' hardness and decreased their lightness. In conclusion, enriching butter cookies with freeze-dried mulberry leaves can improve their nutritional value and antioxidant activity. [ABSTRACT FROM AUTHOR]

Millet products have garnered global recognition for their exceptional nutritional profile, appealing to various age demographics, and, therefore, fortifying such products with minerals can ensure nutritional security. This research explores the feasibility of utilizing millet as a substitute for refined wheat flour in biscuit production. Three distinct millet varieties were investigated: finger, pearl, and buckwheat. Employing response surface methodology (RSM), the optimal ratio of these flours was determined, resulting in a blend of 1.5:1:1, respectively. The optimized multi-millet biscuits were further enhanced with calcium fortification and subjected to comprehensive physico-chemical analysis. Proximate composition analysis revealed favorable levels of protein (5.472 ± 0.31%), ash (2.80 ± 0.57 g/100 g), and energy density (5.8015 ± 0.004 kcal/g), indicating a significantly higher protein content, enriched mineral profile, and high energy density as compared to refined wheat flour products. Sensory evaluation encompassing attributes such as color and texture and organoleptic assessment using a nine-point hedonic scale demonstrated favorable acceptance. Additionally, the overall acceptability of the biscuits remained consistently high throughout storage, ranging from 8.263 ± 0.65 (day 0) to 8.053 ± 0.85 (day 14). This study underscores the potential of multi-millet biscuits as a nutritious and palatable alternative to traditional wheat-based snacks, offering an avenue for diversifying dietary options and promoting healthier food choices. [ABSTRACT FROM AUTHOR]

Meat products are known for their lipid profile rich in saturated fats and cholesterol, and also for the formation of oxidation compounds; therefore, a reduction in animal fat may result in a product less harmful to health. Pijuayo is an Amazon fruit known for its nutritional properties, such as its fiber and lipid content. For these reasons, it is an attractive fruit to replace animal fat in meat products. The present work used pijuayo pulp and peel flours to partially replace animal fat in beef-based burgers at 25% and 50% levels, considering sensory and physicochemical outcomes evaluated by Principal Component Analysis (PCA), Correspondence Analysis (CA) and Multiple Factor Analysis (MFA). Pijuayo flour affected the physicochemical characteristics evaluated by PCA, where the samples with greater fat replacement were characterized by a high carbohydrate content and instrumental yellowness. The minimal fat replacement did not abruptly affect the PCA's instrumental texture and color, proximal composition, yield properties, and lipid oxidation. The overall liking was greater in the 25% fat reduction treatments, even greater than the control, in which positive sensory attributes for liking were highlighted for those treatments. A small segment of consumers (11% of total consumers) preferred the treatment with greater replacement of fat with pijuayo peel flour, which these consumers tended to characterize as seasoned. However, this treatment had the lowest liking. The MFA showed that the sensory characteristics tender and tasty were strongly correlated with overall liking and were highlighted in the samples of 25% fat reduction, suggesting that the pijuayo improves the tenderness and flavor of reduced-fat burgers. Other inclusion levels between 25% and 50% of fat replacement could be explored, and optimization studies are needed. In addition, the sensory characteristics and flavor-enhancing compounds of the fruit, as well as the nutritional aspects of the inclusion of pijuayo, should be studied, such as the fatty acid profile. These characteristics will be informative to explore pijuayo as a fat replacer at a pilot scale and industrial scale. [ABSTRACT FROM AUTHOR]

Elevating the flavor profile of strong flavors Baijiu has always been a focal point in the industry, and pit mud (PM) serves as a crucial flavor contributor in the fermentation process of the fermented grains (FG). This study investigated the influence of wheat flour and bran (MC and FC) as PM culture enrichment media on the microbiota and metabolites of FG, aiming to inform strategies for improving strong-flavor Baijiu flavor. Results showed that adding PM cultures to FG significantly altered its properties: FC enhanced starch degradation to 51.46% and elevated reducing sugar content to 1.60%, while MC increased acidity to 2.11 mmol/10 g. PM cultures also elevated FG's ester content, with increases of 0.36 times for MC-FG60d and 1.48 times for FC-FG60d compared to controls, and ethyl hexanoate rising by 0.91 times and 1.39 times, respectively. Microbial analysis revealed that Lactobacillus constituted over 95% of the Abundant bacteria community, with Kroppenstedtia or Bacillus being predominant among Rare bacteria. Abundant fungi included Rasamsonia, Pichia, and Thermomyces, while Rare fungi consisted of Rhizopus and Malassezia. Metagenomic analysis revealed bacterial dominance, primarily consisting of Lactobacillus and Acetilactobacillus (98.80–99.40%), with metabolic function predictions highlighting genes related to metabolism, especially in MC-FG60d. Predictions from PICRUSt2 suggested control over starch, cellulose degradation, and the TCA cycle by fungal subgroups, while Abundant fungi and bacteria regulated ethanol and lactic acid production. This study highlights the importance of PM cultures in the fermentation process of FG, which is significant for brewing high-quality, strong-flavor Baijiu. [ABSTRACT FROM AUTHOR]

Oleogels, which are traditionally utilized to reduce saturated and trans fats in bakery foods, have recently shown promising applications in non-bakery foods, particularly in the enhancement of their food texture and cooking qualities. This study investigates the impact of incorporating stearic acid-containing candelilla wax–groundnut oil oleogel in various proportions on the production of whole wheat pasta. Five different pasta samples were prepared by replacing water with oleogels in varying concentrations (2.5%, 5%, 10%, and 15%), and their physicochemical attributes were evaluated using a range of analytical methods for both cooked and uncooked pasta (like microscopy, colorimetry, dimensional analysis, texture, cooking qualities, moisture content, and FTIR). Significant differences in width, thickness, and color properties were observed between the control sample (0% oleogel) and those containing oleogel, with notable variations in surface texture and color intensities, particularly with the higher oleogel content (p < 0.05). Cooked pasta exhibited lower L* values and higher a* values than uncooked pasta. Stereo zoom microscope and field emission scanning electron microscope (FESEM) micrographs demonstrated a change in the pasta surface topology and microstructures. Dark spots on the pasta with greater oleogel concentrations (samples with 10% and 15% oleogel replacement) suggest the formation of starch–lipid complexes. Cooking induced pore formation, which was more pronounced when the oleogel content was increased, impacted the water absorption capacity, swelling index, and moisture content. The cooked samples exhibited higher moisture content and improved polymer network stability compared to the uncooked ones, indicating the potential of oleogel incorporation to modulate pasta properties in a concentration-dependent manner. These findings underscore the versatility of oleogels when their applications are diversified in non-bakery foods to enhance food texture and quality. [ABSTRACT FROM AUTHOR]

Grain from improved varieties of the perennial grass Thinopyrum intermedium (Host) Barkworth & D.R. Dewey is marketed under the trade name Kernza (common name intermediate wheatgrass, IWG). While a growing body of evidence is available on the nutritional quality of Kernza, gaps exist for components such vitamins and minerals and protein quality. Therefore, we performed two studies on early-generation breeding program material, characterizing nutritional quality by quantifying macronutrients, sugars, dietary fiber, amino acid profiles, fat composition, vitamins, minerals, carotenoids, antioxidants, and antioxidant activity. The IWG studied frequently had concentrations significantly different from the reference values for whole wheat flour. For example, IWG had 50% higher protein, 129% higher dietary fiber, and 65% higher ash content than reference whole wheat flour. Calcium and selenium were 267% and 492% higher, respectively, in IWG than whole wheat flour. Riboflavin and folate were 43% and 447% higher, respectively, and niacin 74% lower in IWG versus whole wheat flour. We identified lysine as the limiting amino acid, although its concentration was 33% greater in IWG than in whole wheat flour. These results support potential benefits of Kernza for human nutrition. This work supports ongoing studies to further characterize and evaluate nutritional quality during the domestication and breeding process. [ABSTRACT FROM AUTHOR]

One of the oldest biotechnological processes used in bread manufacture is sourdough production which relies on wild yeast and lactobacillus cultures naturally present in flour. The aim of this paper was to evaluate the influence of selected flours of different cereal grains (ancient wheat, corn, and rye), different dough variations, and temperature of fermentation on the quality of spontaneous sourdough. Two values of fermentation temperatures were tested (25 °C and 35 °C), and for each temperature analyzed, three backslopping steps were carried out to obtain mature doughs according to the traditional type I sourdough scheme. In total, 14 different sourdoughs were produced, and microbiology, pH, and total titration acidity for 96 h were determined. Optimal pH values for the samples determined that the optimal fermentation period was 48 h. The acidification rate of the dough was faster at 35 °C than at 25 °C. This fact became evident via the pH values obtained in the first 24 h. However, from this point, the pH values were lower in the samples kept at 25 °C, showing that a cooler fermentation temperature allows the acidification activity of the microorganisms to be prolonged for a longer time. In the study carried out, the ideal fermentation time for the population of LAB and yeasts is 72 h at a temperature of 25 °C, and the most productive sourdoughs were the dough with 100% Einkorn wheat flour and the dough obtained from the 1:1 combination of flour rye and corn flours. [ABSTRACT FROM AUTHOR]

Consumers are more interested in replacing commonly used chemical preservatives with natural substances. The effect of 5, 10, 20, 40, and 80 mg of thyme and lemongrass essential oils (THY and LMG, respectively) per 100 g of wheat flour was studied from the viewpoints of dough rheology, dough leavening progress, and the results of laboratory baking trial. Changes in dough viscoelastic properties were evaluated by the Mixolab rheometer and the company software. The higher the thyme oil portion, the higher the dough structure destruction by kneading and heat input in torque point C2, and consecutively shorter stability of dough consistency (up to one-half of the values recorded for the control); reversely, the LMG did not affect both features verifiably. In the 90 min leavening test, a dough weight loss was decelerated by both essential oils similarly. During the baking test, the average volume of wheat small breads as control was evaluated on level 167 mL (bread yield 451 mL/100 g flour). Independently of the dose of the THY or LMG, small bread volumes oscillated between 148–168 and 135–161 mL (average bread yields 442 and 443 mL/100 g flour, respectively). The shelf life of the products with a higher portion of essential oil was extended by up to 7 days. [ABSTRACT FROM AUTHOR]

Background: Grape seed polyphenol bioactivity is linked to reduced risk of metabolic syndrome, type 2 diabetes, obesity, and coronary heart disease development. Furthermore, regular consumption of β-glucan is associated with decreased lipidemic and glycemic profiles. The aim was to investigate the acute effect of crackers enriched with either 10% grape seed flour or 40% barley flour with added β-glucan along with a high-fat and high-carbohydrate meal on biomarkers of postprandial glycemia, lipidemia, and oxidative stress. Methods: In a randomized, three-arm crossover design study, 12 healthy subjects were assigned to consume breakfast consisting of bread, butter, and 250 mL water along with crackers containing either (a) wheat flour, (b) 10% grape seed flour, or (c) 40% barley flour enriched with β-glucan. Blood samples were drawn immediately before and 30, 90, and 180 min after the meal. Total antioxidant capacity was measured in plasma with the FRAP method. Total cholesterol, high-density lipoprotein cholesterol, low-density lipoprotein cholesterol, triglycerides, glucose, and uric acid were measured in serum. Results: Tested markers did not differ between the intervention groups at baseline, 30, 90, and 180 min (p ≥ 0.05) post-prandially. Conclusions: Enriched cracker consumption did not significantly affect the selected markers at the postprandial state, although better serum glucose and lipid levels, similar to baseline values, were maintained. [ABSTRACT FROM AUTHOR]

The effects of a single-screw extruder configuration and processing variables such as conventional extrusion or hybrid treatments with xylanase were tested on the extrusion performance and selected characteristics of the developed non-starch polysaccharide-rich (NSP-rich) wheat flour. L/D 16 and 20 extruder configurations with various screw profiles were used. The interactions between processing variables (moisture content 23, 25, 27%; screw speed 40, 60, 80 rpm; xylanase level 0, 50, 100 ppm) were assessed to indicate energy consumption and the rheological properties of flour. The results showed that the possibility of obtaining enzyme-assisted extruded flour products derived from flours of varying characteristics depended on the processing conditions. The application of various extruder configurations and screw profiles showed significant effects on both processing behavior and rheological characteristics. The longer L/D 20 extruder configuration using a screw profile with mixing elements allowed us to obtain products with lower extrusion pressure (max. 20.8 bar) and energy requirements (max. SME = 33.1 kWh/kg) and better rheological properties (max. Hyd = 69.2%, less intensive starch gelatinization with max. C3 = 1.47 Nm) than the L/D 16 version. The extruded wheat flour was characterized by improved hydration properties and limited retrogradation tendency, especially when hybrid extrusion with xylanase was applied. This may lead to favorable results, as the newly developed enzymatic extrusion modification method produces NSP-rich wheat flour with specific techno-functional and rheological characteristics that can be seen as a potential "clean label" enhancer in bakery products. Our statistical analysis confirmed feed moisture and screw speed to be the variables with the most significant effect on wheat flour features. [ABSTRACT FROM AUTHOR]

Aflatoxins (AFs) including AFB1, AFB2, AFG1 and AFG2 are widely found in agriculture products, and AFB1 is considered one of the most toxic and harmful mycotoxins. Herein, a highly sensitive (at the pg mL−1 level) and group-specific enzyme-linked immunosorbent assay (ELISA) for the detection of AFB1 in agricultural and aquiculture products was developed. The AFB1 derivative containing a carboxylic group was synthesized and covalently linked to bovine serum albumin (BSA). The AFB1-BSA conjugate was used as an immunogen to immunize mice. A high-quality monoclonal antibody (mAb) against AFB1 was produced by hybridoma technology, and the mAb-based ELISA for AFB1 was established. IC50 and limit of detection (LOD) of the ELISA for AFB1 were 90 pg mL−1 and 18 pg mL−1, respectively. The cross-reactivities (CRs) of the assay with AFB2, AFG1, and AFG2 were 23.6%, 42.5%, and 1.9%, respectively, revealing some degree of group specificity. Corn flour, wheat flour, and crab roe samples spiked with different contents of AFB1 were subjected to ELISA procedures. The recoveries and relative standard deviation (RSD) of the ELISA for AFB1 in spiked samples were 78.3–116.6% and 1.49–13.21% (n = 3), respectively. Wheat flour samples spiked with the mixed AF (AFB1, AFB2, AFG1, AFG2) standard solution were measured by ELISA and LC-MS/MS simultaneously. It was demonstrated that the proposed ELISA can be used as a screening method for evaluation of AFs (AFB1, AFB2, AFG1, AFG2) in wheat flour samples. [ABSTRACT FROM AUTHOR]

The aim of this work was to assess the chemical composition and physico-chemical, techno-functional, and in vitro antioxidant properties of flours obtained from the peel and flesh of pitahaya (Hylocereus ocamponis) to determine their potential for use as ingredients for food enrichment. The chemical composition, including total betalains, mineral content, and polyphenolic profile, was determined. The techno-functional properties (water holding, oil holding, and swelling capacities) were also evaluated. For the antioxidant capacity, four different methodologies, namely ferrous ion-chelating ability assay, ferric-reducing antioxidant power assay; 1,1-Diphenyl-2-picrylhydrazyl radical scavenging ability assay, and 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) radical assay, were used. Pitahaya-peel flour had higher values for protein (6.72 g/100 g), ash (11.63 g/100 g), and dietary fiber 56.56 g/100 g) than pitahaya-flesh flour, with values of 6.06, 3.63, and 8.22 g/100 g for protein, ash, and dietary fiber, respectively. In the same way, pitahaya peel showed a higher content of minerals, betalains, and polyphenolic compounds than pitahaya-flesh flour, with potassium (4.43 g/100 g), catechin (25.85 mg/g), quercetin-3-rhamnoside (11.66 mg/g) and myricetrin (12.10 mg/g) as principal compounds found in the peel. Again, pitahaya-peel flour showed better techno-functional and antioxidant properties than pitahaya-flesh flour. The results obtained suggest that the flours obtained from the peel and pulp of pitahaya (H. ocamponis) constitute a potential material to be utilized as an ingredient in the food industry due to the high content of bioactive compounds such as betalains, phenolic acids, and flavonoids, with notable antioxidant capacity. [ABSTRACT FROM AUTHOR]

Acorn flour is a rich source of nutrients and is beneficial to human health due to, among other things, its low glycemic index and polyphenol content. In order to obtain more accurate data on the levels and activities of the substances tested after ingestion and digestion, it may be beneficial to use a simulated in vitro digestion method. Therefore, the objective of the present study was to elucidate the content of polyphenols, individual phenolic acids, flavonoids and antiradical properties of acorn flour and pasta enriched with acorn flour before and after simulated in vitro gastrointestinal digestion. The results indicate that the total polyphenol content (TPC), flavonoid content and radical scavenging activity exhibited an increasing trend following the initial digestion stage and a decreasing trend following the second stage. Nevertheless, the levels of phenolic acids demonstrated an increase in both digestion phases. The digestion processes of polyphenols in acorn flour differ significantly from those in pasta. In the case of pasta, total polyphenols, phenolic acids and flavonoids, as well as free radical scavenging properties, demonstrated a decreasing trend following each digestion stage. [ABSTRACT FROM AUTHOR]

Environmental degradation leads to an unsustainable food system. In addition to this issue, the consumption of foods that improve people's health and well-being is recommended. One of the alternatives is undoubtedly the use of by-products of winemaking, namely in the form of grape pomace flour (GPF). To verify the benefits of using the Touriga Nacional and Arinto (Vitis vinifera L.) flour varieties, analytical determinations were made to identify and quantify different components. In terms of nutritional characterization, the Touriga Nacional GPF showed results that indicate better nutritional quality than the Arinto GPF. The Touriga Nacional and Arinto samples had protein contents of 10.13% and 8.38%, polyunsaturated fatty acids of 6.66% and 5.18%, soluble dietary fiber of 14.3% and 1.7%, and insoluble dietary fiber of 55.1% and 46.4%, respectively. The anthocyanins, proanthocyanidins, and flavonols presented in samples were detected by HPLC-DAD/ESI-MS. Atomic absorption spectrometry revealed elevated concentrations of certain elements in Touriga Nacional compared to Arinto, with the former showing higher levels of aluminum (130 mg/kg) and iron (146 mg/kg) against the latter's Al (120 mg/kg) and Fe (112 mg/kg) content. GPF could become a valuable ingredient due to its nutritional quality and high content of various polyphenols. [ABSTRACT FROM AUTHOR]

The effect of sulfuric acid hydrolysis on the Pickering emulsifying capacity of Tartary buckwheat flour (TBF) rich in starch was evaluated for the first time. The results indicate that the sulfuric acid concentration and hydrolysis time had a significant impact on the Pickering emulsifying capacity of acid-hydrolyzed Tartary buckwheat flour (HTBF). A low sulfuric acid concentration (1–2 mol/L) could reduce the particle size of HTBF, but it also decreased the Pickering emulsifying ability. At a sulfuric acid concentration of 3 mol/L, appropriate treatment time (2 and 3 days) led to particle aggregation but significantly improved wettability, thereby resulting in a rapid enhancement in emulsifying capacity. Under these conditions, the obtained HTBF (HTBF-D2-C3 and HTBF-D3-C3) could stabilize medium-chain triglyceride (MCT)-based Pickering high-internal-phase emulsions (HIPEs) with an oil-phase volume fraction of 80% at the addition amounts (c) of ≥1.0% and ≥1.5%, respectively. Its performance was significantly superior to that of TBF (c ≥ 2.0%). Furthermore, at the same addition amount, the droplet size of HIPEs constructed by HTBF-D3-C3 was smaller than that of HTBF-D2-C3, and its gel strength and microrheological performance were also superior to those of HTBF-D2-C3, which was attributed to the higher wettability of HTBF-D3-C3. The findings of this study can facilitate the in-depth application of Tartary buckwheat and provide references for the development of novel Pickering emulsifiers. [ABSTRACT FROM AUTHOR]

The present study describes the enhancement of the nutritional values of gluten-free rice crackers by adding whole black rice grain flour. The crackers were prepared by combining whole brown rice flour (WRF) and whole black rice flour (BRF) in ratios of 0% (WRC), 25% (25-BRC), 50% (50-BRC), 75% (75-BRC), and 100% (BRC). The resulting samples underwent in-vivo effects on postprandial blood glucose levels as well as physicochemical and sensory analysis. In comparison to WRC, the samples containing 100% added black rice flour presented higher nutritional qualities in terms of protein, by 16.61%, 8.64% for lipids, 5.61% for ash, 36.94% for crude fiber, 58.04% for total polyphenols, 95.49% for proanthocyanidins, and 88.07% for flavonoids. The addition of BRF had a suppressing effect on lightness (L*) and yellowness (b*), while redness (a*) increased. The results of the glycemic measurements confirmed that consumption of crackers made from brown or black whole-grain rice grain flour does not generate glycemic peaks above the limit of 30 mg/dL in baseline blood glucose levels. The results of developing rice crackers from black and brown flour blends showed promising physicochemical and nutritional properties and could provide a good alternative to wheat flour as a gluten-free product. [ABSTRACT FROM AUTHOR]

In recent years, the consumption of gluten-free products has increased due to the increasing prevalence of celiac disease and the increased preference for gluten-free diets. This study aimed to make cookies using a mixture of cañihua flour, whey, and potato starch. The use of a Box–Behnken design allowed for flexible ingredient proportions and physicochemical properties, centesimal composition, color, texture, and sensory attributes to be evaluated through consumer tests (Sorting and acceptability). The results highlighted significant variations in physicochemical data, composition, color, and texture across formulations. The blend with 38.51% cañihua flour, 10.91% sweet whey, 25.69% potato starch, 8.34% margarine, 11.10% sugar, 0.19% sodium chloride, 0.51% baking powder, 0.51% vanilla essence, and 4.24% egg exhibited superior sensory appeal. This formulation boasted excellent texture, aroma, flavor, color, and appearance, indicating high sensory and physicochemical quality. The use of cañihua flour, sweet whey, and potato starch not only provides a gluten-free option but also delivers a nutritious and sensorily pleasing choice for those with dietary restrictions. Future research could explore the commercial viability of producing these cookies on a larger scale, as well as investigating the potential health benefits of these ingredients. [ABSTRACT FROM AUTHOR]

Wheat bran possesses diverse nutritional and functional properties. In this study, wheat bran aqueous extract (WBE) was produced and thoroughly characterized as a functional ingredient and improver for bakery application. The WBE contained 50.3% total carbohydrate, 24.5% protein, 13.0% ash, 6.7% soluble fiber, 2.9% insoluble fiber, and 0.5% β-glucan. Notably, adding 7.5% WBE significantly increased the bread-specific volume to 4.84 cm3/g, compared with the control of 4.18 cm3/g. Adding WBE also resulted in a remarkable improvement in dough properties. The WBE-enriched dough showed increased peak, setback, breakdown, and final viscosities, along with higher storage and loss modulus. Scanning electron microscopy analysis further revealed that the WBE promoted the aggregation of protein and starch within the dough. The extractable gliadin to glutenin ratio increased with 5 and 7.5% WBE additions, compared with the control and 2.5% WBE addition. WBE did not significantly alter the starch gelatinization temperature or dough extension properties. These findings demonstrate that the inclusion of WBE in wheat flour is a promising approach for producing high-quality bread that is enriched with dietary fiber and protein. [ABSTRACT FROM AUTHOR]

Malt is a natural additive to bread in amounts below 1%. However, there is a lack of research on supplementing bread with a larger dose of malt. The study aimed to evaluate the partial replacement of wheat flour with oat flour (10%) with/without the addition of malted oat flour (0.6%) and scalded malt flour (10%) on the technological and health-promoting quality of bread. At the dough preparation stage, the malted flour was scalded. The dough was prepared using the single-phase method, and laboratory baked goods were prepared using a standard baking test for pan bread. It was found that the preparation of the dough by the preliminary scalding of malt flour resulted in an improvement in the bread volume and a lower increase in crumb hardness during 2-day storage, i.e., delayed staling, compared to the control bread. Replacing wheat flour with 10% oat flour contributed to an increase in the dietary fiber content of bread and a decrease in its energy value. The measurable effect of adding 10% scalded oat malt flour to bread was a 1.5-fold increase in the total polyphenols content and an almost 2.5-fold increase in antioxidant activity compared to bread supplemented with oat flour. [ABSTRACT FROM AUTHOR]

Smallanthus sonchifolius, popularly known as yacon, is a member of the Asteraceae family. Due to its medicinal and edible value, yacon is consumed by different populations. Yacon is unique due to its high fructo-oligosaccharide and inulin content, as well as flavonoids, sesquiterpene lactones, and phenolic acids. Roots can be used to produce flour, which is less perishable and can be applied in various industrial products. This systematic review focuses on the effects of yacon flour on metabolic parameters. PubMed, Cochrane, Embase, Science Direct, Scopus, Web of Science, and Google Scholar databases were consulted, and PRISMA guidelines were followed in the selection of the studies. In total, 526 articles were found in the databases, and of these, only 28 full texts were eligible for inclusion. After applying the inclusion and exclusion criteria, seven studies were finally included. The results showed that the use of yacon flour can reduce glycemia, HbA1c, advanced glycation ends, plasma lipids, body fat mass, body weight, and waist circumference and improve intestinal microbiota and the antioxidant status. Further exploration of the effects of yacon flour is warranted, and additional clinical trials are necessary to determine the optimal daily consumption levels required to assist in improving metabolic parameters. [ABSTRACT FROM AUTHOR]

Fortification of bakery products with plant-based functional ingredients has gained interest in recent years. Low-cost fruit and vegetable waste has been proposed to replace wheat flour, but less research has been conducted on gluten-free flours. Rice is generally accepted as a gluten-free alternative to wheat flour but is poor in bioactive constituents; thus, the addition of vegetable-based functional ingredients could improve the nutritive value of gluten-free products. In the present work, IV-range carrot waste powder (CP) was incorporated into rice-based gluten-free muffin formulations in different proportions (5, 10, 20, and 30% w/w). The impact of CP addition on physicochemical and antioxidant properties was evaluated in flour blends, doughs, and baked products. Products were also evaluated in terms of water activity, hardness, and colour before and after a one-week storage period under fridge conditions. The results showed that water and oil absorption capacities increased in flour blends with CP addition, whereas the pasting properties of flour blends were affected when adding CP. Rheological measurements revealed an increase of G' and G" modulus values with CP addition. Colour was also significantly modified by CP addition, since CP provided an orangish and brownish colour, but also due to intensified Maillard reactions during baking. Muffin hardness was reduced in enriched formulations compared to control ones, which was attributed to the fibre being incorporated with CP. It was confirmed that CP addition improved the antioxidant properties of both flour blends and muffins, with the higher the replacement, the better the antioxidant properties. The quality of gluten-free muffins was hindered after one week stored under cold conditions, so that colour was affected, hardness increased, and the antioxidant properties diminished. In conclusion, this work presents an interesting approach for the use of carrot waste flour as a functional food ingredient to improve the nutritional value of new gluten-free rice-based muffins, thus contributing to the circularity of food systems and to the development of healthier and more sustainable diets. [ABSTRACT FROM AUTHOR]

The research is focused on the quantitative evaluation of the flaxseed (Linum usitatissimum L.) proteome at the level of seed cake (SC), fine flour—sieved a fraction below 250 µm (FF)—and protein concentrate (PC). The evaluation was performed on three oilseed flax cultivars (Agriol, Raciol, and Libra) with different levels of α-linolenic acid content using LC-MS/MS (shotgun proteomics) analysis, which was finalized by database searching using the NCBI protein database for Linum usitatissimum and related species. A total of 2560 protein groups (PGs) were identified, and their relative abundance was calculated. A set of 33 quantitatively most significant PGs was selected for further characterization. The selected PGs were divided into four classes—seed storage proteins (11S globulins and conlinins), oleosins, defense- and stress-related proteins, and other major proteins (mainly including enzymes). Seed storage proteins were found to be the most abundant proteins. Specifically, 11S globulins accounted for 41–44% of SC proteins, 40–46% of FF proteins, and 72–84% of PC proteins, depending on the cultivar. Conlinins (2S albumins) were the most abundant in FF, ranging from 10 to 13% (depending on cultivar). The second most important class from the point of relative abundance was oleosins, which were represented in SC and FF in the range of 2.1–3.8%, but only 0.36–1.20% in PC. Surprisingly, a relatively high abundance of chitinase was found in flax products as a protein related to defence and stress reactions. [ABSTRACT FROM AUTHOR]

Featured Application: Incorporation of hemp flour as a natural antioxidant in minced meat products to enhance nutritional quality. Consumers are becoming increasingly concerned about synthetic preservatives like nitrites in meat, prompting the meat industry to explore alternatives in order to lower nitrite levels. This study investigated the effects of incorporating hemp flour on the chemical and shelf-life characteristics of minced meat products with reduced nitrite content. Three types of products were prepared: HF0 (control) (0% hemp flour, 30 mg/kg NaNO2), HF4 (4% hemp flour, 15 mg/kg NaNO2), and HF6 (6% hemp flour, 15 mg/kg NaNO2). Analyses were conducted on proximate composition, fatty acid composition, antioxidant properties, lipid oxidation, colour, texture, and sensory characteristics. The addition of hemp flour at 6% reduced moisture content and influenced ash and sodium chloride levels in minced meat products. Despite the favorable fatty acid profile of hemp flour, its inclusion did not significantly alter the composition of the products. However, it did lead to significantly lower levels of lipid oxidation and modified the antioxidant capacity. Colour attributes were affected, with a higher hemp flour content resulting in colour deterioration. Cooking loss increased with a higher hemp flour content, and the minced meat products were significantly harder. Visual and olfactory sensory evaluation indicated that there were no significant differences in most traits, suggesting consumer acceptance of hemp-flour-enriched minced meat products. Overall, this study highlights the potential of hemp as a functional ingredient in minced meat products, also exhibiting the ability to reduce lipid oxidation. [ABSTRACT FROM AUTHOR]

The seed of Citrullus lanatus mucosospermus, known as egusi, is versatile and explored for its oil and flour functionality. Raw flour can be used as a raw material in a nutritional program due to its oil-rich, remarkably high protein content, and richness in omega-6 fatty acids. There is a need to explore eco-friendly defatting methods using the supercritical CO2 extraction method (SFECO2) to preserve this seed's generic richness and to control the flour–oil ratio in processing formulations. The supercritical fluid extraction method uses temperature, pressure, and CO2 flow rate to determine the best yield and extraction parameters. Defatted egusi flour (DEF) was extracted using three runs. Firstly, at 60 °C, 30 g/h, and 450 bar (DEF1); secondly, at 55 °C, 30 g/h, and 600 bar (DEF2); and thirdly, extraction was performed at 75 °C, 30 g/h and 600 bar (DEF3). Trace and major elements were analysed using Agilent 7700 quadruple ICP-MS (Agilent Technologies Network, Palo Alto, CA, USA) and Thermo Cap 6200 ICP-AES (Thermo Scientific, Waltham, MA, USA), respectively. The sugar was separated on a gas chromatograph coupled to a Mass Selective Detector (MSD). The fundamental pasting property measurements were performed using a Rapid Visco Analyser RVA 4500 Perten instrument Sin 214 31208-45 Australia. Data analysis was conducted using IBM SPSS version 29 software (v. 2022). The protein content of defatted egusi flour ranged from 48.4 for DEF2 to 60.4% w/w for DEF1 and differed significantly, with a rich amino acid high in glutamine ranging from 9.8 to 12.9 g/100 g). DEF2 (512.0 cP) showed the highest peak viscosity and was the most viscous among the samples. Defatted flour with lower temperature and lower pressure (60 °C and 450 bar) offered the best nutritional properties, proffering defatted egusi flour from SFECO2, a novel flour for dietary programs. [ABSTRACT FROM AUTHOR]

Xylanase is an essential component used to hydrolyze the xylan in wheat flour to enhance the quality of bread. Presently, cold-activated xylanase is popularly utilized to aid in the development of dough. In this study, ancestral sequence reconstruction and molecular docking of xylanase and wheat xylan were used to enhance the activity and stability of a thermophilic xylanase. The results indicated that the ancestral enzyme TmxN3 exhibited significantly improved activity and thermal stability. The Vmax increased by 2.7 times, and the catalytic efficiency (Kcat/Km) increased by 1.7 times in comparison to TmxB. After being incubated at 100 °C for 120 min, it still retained 87.3% of its activity, and the half-life in 100 °C was 330 min, while the wild type xylanase was only 55 min. This resulted in an improved shelf life of bread, while adding TmxN3 considerably enhanced its quality with excellent volume and reduced hardness, chewiness, and gumminess. The results showed that the hardness was reduced by 55.2%, the chewiness was reduced by 40.11%, and the gumminess was reduced by 53.52%. To facilitate its industrial application, we further optimized the production conditions in a 5L bioreactor, and the xylanase activity reached 1.52 × 106 U/mL culture. [ABSTRACT FROM AUTHOR]

Crispbread is gaining popularity as a healthy snack or bread substitute. This is a lightweight dry type of flat food that stays fresh for a very long time due to its lack of water and usually contains different types of grain flour, including gluten-containing wheat or rye flour. The incorporation of legume purée into crispbread represents an innovative approach to enhancing the nutritional profile and taste of the product. The rheological properties of various legume purées (chickpea, white bean, black bean, and red bean) mixed with citrus pectin were examined, revealing significant differences in fluid behavior and viscosity. Crispbread formulations were analyzed for water content and activity, color, structure, FT-IR spectra, water vapor adsorption isotherms, and sensory evaluation. The results showed the possibility of obtaining crispbread based on the purée of legumes and citrus pectin. Crispbread enriched with red bean purée exhibited low water activity (0.156) and water content (3.16%), along with a continuous porous structure, and received the highest sensory evaluation score among the products. These findings can be treated as a basis for the development of other innovative recipes and combinations using legumes. [ABSTRACT FROM AUTHOR]

This study aimed to explore the feasibility of substituting wheat flour with varying levels (10%, 15%, 20%, and 25%) of flour derived from field bean, chickpea, lentil, and pea seeds. The investigation focused on assessing the physical properties of wheat dough and the physicochemical characteristics of bread samples. The addition of legume seed flours significantly influenced the dough's development time, particularly with chickpea flour causing a notable increase in this parameter. While dough stability was generally shorter for mixtures containing wheat flour and legume seed flour, chickpea flour was an exception, significantly prolonging dough stability time. Furthermore, the inclusion of legume flours resulted in increased protein, ash, fiber, fat, and phenolic contents in the enriched bread, while the carbohydrate content decreased. Additionally, the crumb exhibited increased redness and yellowness and decreased lightness due to the enrichment of the bread. Notably, the antioxidant activity of bread containing legume flour also increased, with the most significant increase observed when pea flour was utilized. Conversely, negative effects on bread volume, crumb density, and texture parameters were noted with the incorporation of legume additives. Taking into consideration the results of both physicochemical analyses and sensory evaluation, it is recommended that the incorporation of the specified legume flours should not exceed 15% in relation to the quantity of wheat flour used. [ABSTRACT FROM AUTHOR]