Search

This study utilizes Automatic Dependent Surveillance–Broadcast (ADS-B) data sourced by the OpenSky Network to curate a dataset aimed at enhancing the precision of aerial suppressant drop predictions in wildland firefighting. By amalgamating ADS-B data with Automated Telemetry Unit (ATU) drop information, this research constructs a reliable base for analyzing the spatial aspects of aerial firefighting operations. Using sequential machine learning models, specifically Long Short-Term Memory (LSTM) networks and 1D Convolutional Neural Networks (1DCNN), the study interprets complex flight dynamics to predict drop locations. The dataset, covering 2017 to 2023, is labeled and segmented to reflect accurate suppressant release events, facilitating the distinction between drop and non-drop activities in fixed-wing aircraft. The LSTM model demonstrated strong predictive performance with an F1 score of 0.922, effectively identifying suppressant drop events with high accuracy. This model's reliable predictions can significantly improve situational awareness in real-time aerial firefighting operations, enabling more informed decision-making and better coordination of resources during wildfire events. [ABSTRACT FROM AUTHOR]

In the present paper, a flight dynamics model is adopted to represent the trim and stability characteristics of a side-by-side helicopter in hovering conditions. This paper develops a numerical representation of the rotorcraft behavior and proposes a set of guidelines for trimming and linearizing the highly coupled rotor dynamics derived by the modeling approach. The trim algorithm presents two nested loops to compute a solution of the steady-state conditions averaged around one blade's revolution. On the other hand, a 38-state-space linear representation of the helicopter and rotor dynamics is obtained to study the effects of flap, lead–lag, and inflow on the overall stability. The results are compared with an analytical framework developed to validate the rotorcraft stability and compare different modeling approaches. The analysis showed that non-uniform inflow modeling led to a coupled longitudinal inflow–phugoid mode which made the vehicle prone to dangerous instabilities. The flap and lead–lag dynamics introduced damping in the system and can be considered beneficial for rotor dynamics. [ABSTRACT FROM AUTHOR]

Advanced Aerial Mobility (AAM) platforms are poised to begin high-density operations in urban areas nationwide. This new category of aviation platforms spans a broad range of sizes, from small package delivery drones to passenger-carrying vehicles. Unlike traditional aircraft, AAM vehicles operate within the urban boundary layer, where large structures, such as buildings, interrupt the flow. This study examines the response of a package delivery drone, a general aviation aircraft, and a passenger-carrying urban air mobility aircraft through an urban wind field generated using Large Eddy Simulations (LES). Since it is burdensome to simulate flight dynamics in real-time using the full-order solution, reduced-order wind models are created. Comparing trajectories for each aircraft platform using full-order or reduced-order solutions reveals little difference; reduced-order wind representations appear sufficient to replicate trajectories as long as the spatiotemporal wind field is represented. However, examining control usage statistics and time histories creates a stark difference between the wind fields, especially for the lower wing-loading package delivery drone where control saturation was encountered. The control saturation occurrences were inconsistent across the full-order and reduced-order winds, advising caution when using reduced-order models for lightly wing-loaded aircraft. The results presented demonstrate the effectiveness of using a simulation environment to evaluate reduced-order models by directly comparing their trajectories and control activity metrics with the full-order model. This evaluation provides designers valuable insights for making informed decisions for disturbance rejection systems. Additionally, the results indicate that using Reynolds-averaged Navier–Stokes (RANS) solutions to represent urban wind fields is inappropriate. It was observed that the mean wind field trajectories fall outside the 95% confidence intervals, a finding consistent with the authors' previous research. [ABSTRACT FROM AUTHOR]

This article examines the flight dynamics and trajectory analysis of a parachute–payload system deployed from a C-17 aircraft. The aircraft is modeled with an open cargo door, extended flaps, and four turbo-fan engines operating at an altitude of 2000 feet Above Ground Level (AGL) and an airspeed of 150 knots. The payloads consist of simplified CONEX containers measuring either 192 inches or 240 inches in length, 9 feet in width, and 5.3 feet in height, with their mass and moments of inertia specified. At positive deck angles, gravitational forces cause these payloads to begin a gradual descent from the rear of the aircraft. For aircraft at zero deck angle, a ring-slot parachute with approximately 20% geometric porosity is utilized to extract the payload from the aircraft. This study specifically employs the CREATE-AV Kestrel simulation software to model the chute-payload system. The extraction and suspension lines are represented using Kestrel's Catenary capability, with the extraction line connected to the floating confluence points of the CONEX container and the chute. The chute and payload will experience coupled motion, allowing for an in-depth analysis of the flight dynamics and trajectory of both elements. The trajectory data obtained will be compared to that of a payload (without chute and cables) exiting the aircraft at positive deck angles. An adaptive mesh refinement technique is applied to accurately capture the engine exhaust flow and the wake generated by the C-17, chute, and payloads. Friction and ejector forces are estimated to align the exit velocity and timing with those recorded during flight testing. The results indicate that the simulation of extracted payloads aligns with expected trends observed in flight tests. Notably, higher deck angles result in longer distances from the ramp, leading to increased exit velocities and reduced payload rotation rates. All payloads exhibit clockwise rotation upon leaving the ramp. The parachute extraction method yields significantly higher exit velocities and shorter exit times, while the payload-chute acceleration correlates with the predicted drag of the chute as demonstrated in prior studies. [ABSTRACT FROM AUTHOR]

Investigating aircraft flight dynamics often requires dynamic wind tunnel testing. This paper proposes a non-contact, off-board instrumentation method using vision-based techniques. The method utilises a sequential process of Harris corner detection, Kanade–Lucas–Tomasi tracking, and quaternions to identify the Euler angles from a pair of cameras, one with a side view and the other with a top view. The method validation involves simulating a 3D CAD model for rotational motion with a single degree-of-freedom. The numerical analysis quantifies the results, while the proposed approach is analysed analytically. This approach results in a 45.41% enhancement in accuracy over an earlier direction cosine matrix method. Specifically, the quaternion-based method achieves root mean square errors of 0.0101 rad/s, 0.0361 rad/s, and 0.0036 rad/s for the dynamic measurements of roll rate, pitch rate, and yaw rate, respectively. Notably, the method exhibits a 98.08% accuracy for the pitch rate. These results highlight the performance of quaternion-based attitude estimation in dynamic wind tunnel testing. Furthermore, an extended Kalman filter is applied to integrate the generated on-board instrumentation data (inertial measurement unit, potentiometer gimbal) and the results of the proposed vision-based method. The extended Kalman filter state estimation achieves root mean square errors of 0.0090 rad/s, 0.0262 rad/s, and 0.0034 rad/s for the dynamic measurements of roll rate, pitch rate, and yaw rate, respectively. This method exhibits an improved accuracy of 98.61% for the estimation of pitch rate, indicating its higher efficiency over the standalone implementation of the direction cosine method for dynamic wind tunnel testing. [ABSTRACT FROM AUTHOR]

Sounding rockets constitute a class of rocket with a generally simple layout, being composed of a cylindrical center-body, a nosecone, a number of fins placed symmetrically around the longitudinal axis (usually three or four), and possibly a boat-tail. This type of flying craft is typically not actively controlled; instead, a passive stabilization effect is obtained through suitable positioning and sizing of the fins. Therefore, in the context of dynamic performance analysis, the margin of static stability is an index of primary interest. However, the classical approach to static stability analysis, which consists in splitting computations in two decoupled domains, namely, around the pitch and yaw axis, provides a very limited insight to the missile performance for this type of vehicle due to the violation of the classical assumptions of planar symmetry and symmetric flight conditions commonly adopted for winged aircraft. To tackle this issue, this paper introduces a method for analyzing static stability through a novel index, capable of more generally assessing the level of static stability for sounding rockets, exploiting the same information on aerodynamic coefficients typically required for more usual (i.e., decoupled) static stability analyses, and suggests a way to assess the validity and shortcoming of the method in each case at hand. [ABSTRACT FROM AUTHOR]

The present study aimed to investigate the capability of mid-fidelity aerodynamic solvers in performing a preliminary evaluation of the static and dynamic stability derivatives of aircraft configurations in their design phase. In this work, the mid-fidelity aerodynamic solver DUST, which is based on the novel vortex particle method (VPM), was used to perform simulations of the static and dynamic motion conditions of the Stability And Control CONfiguration (SACCON): an unmanned combat aerial vehicle geometry developed by NATO's Research and Technology Organisation (RTO), which is used as a benchmark test case in the literature for the evaluation of aircraft stability derivatives. Two different methods were exploited to extract the dynamic stability derivative values from the aerodynamic coefficient time histories that were calculated with DUST. The results for the mid-fidelity approach were in good agreement with the obtained experimental data, as well as with the results obtained using more demanding high-fidelity CFD simulations. This demonstrates its suitability when implemented in DUST for predicting the static and dynamic behavior of airloads in different conditions, as well as in reliably predicting the values of stability derivatives, with the advantage of requiring limited computational effort with respect to classical high-fidelity numerical approaches and the use of wind tunnel tests. [ABSTRACT FROM AUTHOR]

Flying insects exhibit outperforming stability and control via continuous wing flapping even under severe disturbances in various conditions of wind gust and turbulence. While conventional linear proportional derivative (PD)-based controllers are widely employed in insect-inspired flight systems, they usually fail to deal with large perturbation conditions in terms of the 6-DoF nonlinear control strategy. Here we propose a novel wing kinematics-based controller, which is optimized based on deep reinforcement learning (DRL) to stabilize bumblebee hovering under large perturbations. A high-fidelity Open AI Gym environment is established through coupling a CFD data-driven aerodynamic model and a 6-DoF flight dynamic model. The control policy with an action space of 4 is optimized using the off-policy Soft Actor–Critic (SAC) algorithm with automating entropy adjustment, which is verified to be of feasibility and robustness to achieve fast stabilization of the bumblebee hovering flight under full 6-DoF large disturbances. The 6-DoF wing kinematics-based DRL control strategy may provide an efficient autonomous controller design for bioinspired flapping-wing micro air vehicles. [ABSTRACT FROM AUTHOR]

The development of novel aircraft concepts and propulsion technologies requires up-to-date physics-based methods and tools for conceptual aircraft design. In this context, a simulation model for the take-off manoeuvre is proposed in this article, to be employed in the conceptual design phase for aircraft whether of traditional or innovative configuration. The model is capable of evaluating the longitudinal dynamics, both translational and rotational, of the aircraft considered as a rigid body, and influenced by the aerodynamic effects introduced by the presence of the ground. The ground effect, indeed, induces variations in the aerodynamic forces depending on the distance and the attitude of the lifting surfaces from the ground, which may significantly influence the aeromechanical characteristics of the aircraft during the evolution of the take-off manoeuvre. The simulation model is based on the numerical solution of the equations of the dynamics of the rigid aircraft in the longitudinal plane and integrates a vortex lattice aerodynamic solver to evaluate the aerodynamic and aeromechanical characteristics of the aircraft considering the ground effect in each time-step. The proposed approach is configuration independent, as it can model the geometry, evaluate the aerodynamics, and simulate the dynamics of aircraft with any lifting architecture; furthermore, the simulation model is fast and flexible, making it effective for the conceptual phase of aircraft design. The paper proposes the description of the take-off manoeuvre of two aircraft with different airframes: one with a conventional tube-and-wing architecture and one with a box-wing lifting system. The results proposed highlight the potential of the simulation model to detect aeromechanic and dynamic differences during the development of the manoeuvre for different aircraft configurations, and to assess the significance of considering ground effect aerodynamics. [ABSTRACT FROM AUTHOR]

In the early stages of aircraft design, a scaled model of the aircraft is installed in a wind tunnel for dynamic semi-free flight to approximate real flight, and the test data are then used to identify the aerodynamic parameters. However, the absence of the translational motion of the test model makes its flight dynamics different from those in free flight, and the effect of this difference on parameter identification needs to be investigated. To solve this problem, a 3-DOF wind tunnel virtual flight test device is built to fix the test model on a rotating mechanism, and the model is free to rotate in three axes through the deflection of the control surfaces. The flight dynamics equations for the wind tunnel virtual flight test are established and expressed as a decoupled form of the free flight force and the influence of the test support frame force on the model's motions through linearization. The differences between wind tunnel virtual flight and free flight are analysed to develop a model for the identification of aerodynamic parameters. The selection of the lateral-directional excitation signal and the design method of its parameters are established based on the requirements for the identifiability of the aerodynamic derivatives, and a step-by-step method for the identification of aerodynamic force and moment derivatives is established. The aerodynamic parameter identification results of a blended wing body aircraft show that the identification method proposed in this paper can obtain results with high accuracy, and the response of the modified motion model is consistent with that of the free flight motion model. [ABSTRACT FROM AUTHOR]

The concept of thrust-based control without the employment of thrust-vectoring (TVC), already introduced in a previous work by the authors, is further developed in conjunction with an appropriate control suite, tasked with both artificial stabilization and beam-tracking navigation functions. In the paper, the fully non-linear mathematical model employed for testing the controllers in a virtual environment is outlined. Then a comparative approach is adopted in the analysis, where a standard tail-back airship with deflectable aerodynamic surfaces is employed as a baseline, and the performance of a four-thrusters layout with a thrust-based control and no TVC is assessed with respect to it. Featured test cases in forward flight include short climbs, abrupt turns, and multi-checkpoint navigation. The research supports the feasibility and adequate performance of the proposed thrust-based airship layout and control, and presents a critical analysis of the pros and cons with respect to the considered baseline airship configuration featuring standard aerodynamic control. [ABSTRACT FROM AUTHOR]

With the progress of high-performance computing, computationally expensive high-fidelity methods can be applied early in the design process of an aircraft. This enables Computational Fluid Dynamics (CFD) for the assesment of flight performance, handling qualities, flight loads due to manoeuver or gusts, and stability such as flutter. Those aeroealstic analyses require coupling of disciplines to adequately address the interplay of flexibility, aerodynamic forces and inertia forces. Previous work at the German Aerospace Center have demonstrated the proof of concept for those multidisciplinary analyses. Now, UltraFLoads is a simulation suite in the FlowSimulator ecosystem to offer standardized, multidisciplinary scenarios. UltraFLoads can be used as a tool, as a library and as a framework. This work describes the architecture, the integration layers, which scenarios are available and which equations are used. Three different applications are presented. The first case involves a steady fluid–structure-coupled simulation with geometrically nonlinear deformation. The second case compares the deformation of a simulated elastic, free-flying aircraft with actual flight test data. The last application demonstrates the flight dynamic capabilities with a bank to bank maneuver. [ABSTRACT FROM AUTHOR]

The stick-free flight stability is an old-fashioned and non-progressive issue; nevertheless, it is still existent and of significant importance to the design of aircraft whose control system is reversible. The existence of the problem necessitates a deep assessment of stick-free flight stability throughout the aircraft design. Up to now, this problem has been addressed using either analytical approaches, which are only related to the static stability evaluation, or performing flight tests. In this study, the problem is handled in its entirety, from static and dynamic flight stability assessment to design criteria with a comprehensive perspective. Moreover, it is also exhibited that, contrary to what has been generally proposed in the literature, the limitation of the problem of stick-free flight stability through static stability assessment is far from being the main challenge. As a brief scope, the derivation of the control surface dynamics, a stick-free trim algorithm, and assessment rationale of the stick-free static and dynamic flight stability using a simulation approach are proposed. As a consequence, the aim is to set a broad understanding for designers related to this phenomenon and add adjunct design criteria in the design optimization process by approaching it from a modeling, simulation, and flight test perspective. [ABSTRACT FROM AUTHOR]

The accurate modelling and simulation of vehicle dynamics is a fundamental prerequisite for the design and experimental flight testing of aerospace vehicles. In the case of high-altitude supersonic sounding rockets, it is critically important to produce realistic trajectory predictions in a representative range of operational and environmental conditions as well as to produce reliable probability distributions of terminal locations. This article proposes a methodology to develop high-fidelity flight dynamics models that accurately capture aeroelastic, turbulence, atmospheric and other effects relevant to sounding rockets. The significance of establishing a high-fidelity model and of addressing such a problem in the context of developing a digital twin are discussed upfront, together with the key tools utilised in the analysis. In addition to state-of-the-art computational methods to determine the aerodynamic forces, moments and mass changes in various flight regimes (including parachute release), a detailed methodology for incorporating the dynamic aeroelastic response of the rocket is presented. The validity of the proposed method is demonstrated through a simulation case study, which utilises data from an existing rocket prototype. Results corroborate the correct implementation of the proposed algorithms and provide foundations for future research on virtual sensing and digital twin for autonomous navigation and guidance. [ABSTRACT FROM AUTHOR]

This work presents a systematic approach to analyzing the aerodynamic characteristics of tandem rotor forward autorotation considering rotor-to-rotor interference. The single-rotor computational model trimmed from a generic helicopter flight dynamics analysis program was used as the baseline model. The effectiveness of the baseline model is demonstrated by a comparison with data from wind tunnel tests performed in this work. The rotor disk angle of attack and driven moment distribution obtained by the modified model indicate the fact that the rotor acceleration is primarily caused by the higher angle of attack region of the disk. This is of great significance in the rotor blade design, in terms of the drag-to-lift ratio characteristics of the airfoil under different angle-of-attack ranges. The influence of wind speed, rotor shaft angle, and collective pitch on the steady-state rotor speed was then studied. The results show a nonlinear nature of the variation of steady rotor speed with collective pitch, which can cause a thrust control reverse problem during flight operations. To reveal the flow field details of rotor-to-rotor interference, the flow field Navier–Stokes equations of tandem rotor autorotation were solved. Computational results of both rotors' inflow velocities were considered when deriving the empirical model of interference. The refined interference model was compared to the wind tunnel test data of the tandem rotor autorotation and showed good performance. This synthetical methodology, which combines mechanism analysis with CFD-aided refinement and experiment verification, achieves a balance between computational costs and accuracy and thus can be readily applied to engineering practices. [ABSTRACT FROM AUTHOR]

In this paper, a quadrotor dynamic model's energy efficiency was investigated. A method for the design of the dynamic model which assures energy consumption estimation was presented. This model was developed to analyze the energy efficiency of the quadrotor during each maneuver. A medium-class quadrotor (4.689 kg) was used as a test platform. Thrust force correction factors obtained with FLIGHTLAB software were used to predict object behavior in forward flight. Model validation and long-duration flight tests in outdoor windy conditions are also presented. Monte-Carlo simulation was used to study the influence of uncertainties in model parameters on the simulation reliability. The developed model might be used for practical purposes (for example, energy-efficient coverage path planning). [ABSTRACT FROM AUTHOR]

Flight testing has been the historical standard for determining aircraft airworthiness. However, increases in the cost of flight testing and the accuracy of inexpensive CFD encourage the adoption of certification by analysis to reduce or replace flight testing. A framework is introduced to predict the performance in the special case of a modification to an existing, previously certified aircraft. This framework uses a combination of existing flight tests or high fidelity data of the original aircraft as well as lower fidelity data from CFD or wind tunnel testing of the original and modified configurations to create 6-DOF flight dynamics models. Two methods are presented which generate an updated flight dynamics model and estimate the model form uncertainty for the modified aircraft configuration using knowledge of the original aircraft. This updated dynamics model and uncertainty estimate are then used to conduct non-deterministic simulations with wind turbulence included. The framework is applied to an example aircraft system to demonstrate the ability to predict the performance and associated model from the uncertainty of modified aircraft configurations. [ABSTRACT FROM AUTHOR]

In this research, an intelligent control architecture for an experimental Unmanned Aerial Vehicle (UAV) bearing unconventional inverted V-tail design, is presented. To handle UAV's inherent control complexities, while keeping them computationally acceptable, a variant of distinct Deep Reinforcement Learning (DRL) algorithm, namely Deep Deterministic Policy Gradient (DDPG) is proposed. Conventional DDPG algorithm after being modified in its learning architecture becomes capable of intelligently handling the continuous state and control space domains besides controlling the platform in its entire flight regime. Nonlinear simulations were then performed to analyze UAV performance under different environmental and launch conditions. The effectiveness of the proposed strategy is further demonstrated by comparing the results with the linear controller for the same UAV whose feedback loop gains are optimized by employing technique of optimal control theory. Results indicate the significance of the proposed control architecture and its inherent capability to adapt dynamically to the changing environment, thereby making it of significant utility to airborne UAV applications. [ABSTRACT FROM AUTHOR]

Despite offering often significant advantages with respect to other flying machines, especially in terms of flight endurance, airships are typically harder to control. Technological solutions borrowed from the realm of shipbuilding, such as bow thrusters, have been largely experimented with to the extent of increasing maneuverability. More recently, also thrust vectoring has appeared as an effective solution to ameliorate maneuverability. However, with an increasing interest for high-altitude airships (HAAs) and autonomous flight and the ensuing need to reduce weight and lifting performance, design simplicity is a desirable goal. Besides saving weight, it would reduce complexity and increase time between overhauls, in turn enabling longer missions. In this perspective, an airship layout based on a set of non-tilting thrusters, optimally placed to be employed for both propulsion and attitude control, appears particularly interesting. If sufficiently effective, such configurations would reduce the need for control surfaces on aerodynamic empennages and the corresponding actuators. Clearly, from an airship design perspective, the adoption of many smaller thrusters instead of a few larger ones allows a potentially significant departure from more classical airship layouts. Where on one side attractive, this solution unlocks a number of design variables—for instance, the number of thrusters, as well as their positioning in the general layout, mutual tilt angles, etc.—to be set according simultaneously to propulsion and attitude control goals. In this paper, we explore the effect of a set of configuration parameters defining three-thrusters and four-thrusters layout, trying to capture their impact on an aggregated measure of control performance. To this aim, at first a stability augmentation system (SAS) is designed so as to stabilize the airship making use of thrusters instead of aerodynamic surfaces. Then a non-linear model of the airship is employed to test the airship in a set of virtual simulation scenarios. The analysis is carried out in a parameterized fashion, changing the values of configuration parameters pertaining to the thrusters layout so as to understand their respective effects. In a later stage, the choice of the optimal design values (i.e., the optimal layout) related to the thrusters is demanded to an optimizer. The paper is concluded by showing the results on a complete numerical test case, drawing conclusions on the relevance of certain design parameters on the considered performance, and commenting the features of an optimal configuration. [ABSTRACT FROM AUTHOR]

A moving spatial turbulence model is developed for rotorcraft maneuvering simulation under different flight conditions. The recursive algorithms are adopted to model its distributed longitudinal turbulence components, which are correlated with the lateral and vertical axes to form a local spatial turbulence field. The flow field is constrained around the rotorcraft by following its movement, and the corresponding turbulence components are updated at a constant spatial interval. The statistical properties along the longitudinal, lateral, and vertical directions have been validated against the von Kármán theory. A synthetic simulation environment consisting of a flight dynamics model and a pilot model is constructed to demonstrate the effectiveness of the turbulence model. Its performance is validated by comparing the power spectral densities of both rotorcraft responses and pilot controls in turbulence against flight test data. The piloted simulation results on an Approach-to-Hovering task show that the handling qualities ratings are susceptive to the level of turbulence and significantly increase when performing aggressive controls. The simulation also accurately predicts the expected effect of varied aircraft speed, wind speed, turbulence intensity, and stability augmentation system on piloted handling qualities rating for rotorcraft flight in turbulence. [ABSTRACT FROM AUTHOR]

Identification of a spinning projectile controlled with gasodynamic engines is shown in this paper. A missile model with a measurement inertial unit was developed from Newton's law of motion and its aerodynamic coefficients were identified. This was achieved by applying the maximum likelihood principle in the wavelet domain. To assess the results, this was also performed in the time domain. The outcomes were obtained for two cases: when noise was not present and when it was included in the data. In all cases, the identification was performed in the passive mode, i.e., no special system identification experiments were designed. In the noise-free case, aerodynamic coefficients were estimated with high accuracy. When noise was included in the data, the wavelet-based estimates had a drop in their accuracy, but were still very accurate, whereas for the time domain approach the estimates were considered inaccurate. [ABSTRACT FROM AUTHOR]

The tiltrotor has unique flight dynamics due to the aerodynamic interference characteristics. Multiple aerodynamics calculation approaches, such as the CFD method, are utilised to characterise this feature. The calculation process is usually time-consuming, and the obtained results are generally varied from each other. Thus, the uncertainty quantification (UQ) method will be utilised in this research to identify the aerodynamic inaccuracy effect on the handling qualities of the tiltrotor aircraft. The study aims to quantify the influence of the aerodynamic interference on the tiltrotor flight dynamics in different flight states, such as forward speeds and nacelle tilting angles, which can guide the flight dynamics modelling simplification to improve the simulation efficiency. Therefore, uncertainty identification and full factorial numerical integration (FFNI) methods are introduced to scale these aerodynamic uncertainties. The eigenvalue and bandwidth and phase delay requirements are presented as the failure criteria. The UQ calculation indicates that the uncertainties of the aerodynamic calculation significantly affect the handling quality ratings in two flight ranges: the helicopter mode and the conversion and aeroplane modes with higher forward speed (close to the conversion envelope). Furthermore, a sensitivity analysis is performed to identify the mechanism behind these influences. The results demonstrate that aerodynamics affect the pitching attitude, the pitching damping, and the velocity and incidence stability derivatives. However, the effects of the velocity stability and the incidence stability are the reason causing the handling qualities' degradation in the helicopter mode and high-speed mode, respectively. [ABSTRACT FROM AUTHOR]

This paper describes the conceptual design of a micro coaxial unmanned aerial vehicle (MCR UAV v3.0) based on its flight dynamics and a simple aerodynamic analysis using computational fluid dynamics (CFD). In addition, a simple linear control is proposed with the pole assignment technique. The methodology proposed in this paper involves a standardized path for designing the novel micro coaxial UAV. This begins by selecting the avionics to create a primary dimensional design for a later transient and stationary CFD analysis. In effect, the mathematical model is obtained using the Newton–Euler formulation and is linearized to obtain the dynamical requirements of the vehicle. The requirements allow us to design the control scheme with a linear control technique. This process is iterative and uses a combination of flight dynamics and CFD. The control technique is based on pole assignment, ensuring a specific phase condition is used in the controller gain for the stabilization of the proposed aerial vehicle. The control scheme is analyzed once the CFD analysis is correctly performed; in this sense, the methodology proposed in this paper is capable of converging as a result of the dimensional design. This design ensures a suitable vehicle performance according to the dynamical requirements. Thus, the micro coaxial UAV is completely designed based on its flight dynamics along with a CFD analysis, generating a robust methodology. [ABSTRACT FROM AUTHOR]

Insects use dynamic articulation and actuation of their abdomen and other appendages to augment aerodynamic flight control. These dynamic phenomena in flight serve many purposes, including maintaining balance, enhancing stability, and extending maneuverability. The behaviors have been observed and measured by biologists but have not been well modeled in a flight dynamics framework. Biological appendages are generally comparatively large, actuated in rotation, and serve multiple biological functions. Technological moving masses for flight control have tended to be compact, translational, internally mounted and dedicated to the task. Many flight characteristics of biological flyers far exceed any technological flyers on the same scale. Mathematical tools that support modern control techniques to explore and manage these actuator functions may unlock new opportunities to achieve agility. The compact tensor model of multibody aircraft flight dynamics developed here allows unified dynamic and aerodynamic simulation and control of bioinspired aircraft with wings and any number of idealized appendage masses. The demonstrated aircraft model was a dragonfly-like fixed-wing aircraft. The control effect of the moving abdomen was comparable to the control surfaces, with lateral abdominal motion substituting for an aerodynamic rudder to achieve coordinated turns. Vertical fuselage motion achieved the same effect as an elevator, and included potentially useful transient torque reactions both up and down. The best performance was achieved when both moving masses and control surfaces were employed in the control solution. An aircraft with fuselage actuation combined with conventional control surfaces could be managed with a modern optimal controller designed using the multibody flight dynamics model presented here. [ABSTRACT FROM AUTHOR]

This article describes the results of modeling and analysis of a generic internal cargo system using a discretization method of the vector mechanics. The model can be easily incorporated into a tandem helicopter model and is intended for use of simulation and investigating the problems of flight dynamics, control, etc., both in flight operation loading a cargo and flight operation in the process of airdrops. The model is derived by considering the main descriptions of the cargo, including the linear and rotational dynamics, the kinematics, and the forces and moments acting on the helicopter. A simulation method embedded with a numerical trim algorithm is developed for the complete coupling helicopter/cargo nonlinear dynamics system. The simulation application of the model is illustrated, including the case of flight operation loading a cargo by considering three mass configurations of 3000, 4500, and 6000 kg, and the case of flight operation in the process of airdrops at velocities of 0, 40, 80, 120, and 160 knots. Stabilities of the helicopter in the process of airdrops are also analyzed. The major conclusions drawn are: (i) the tandem helicopter has a good attitude maintaining ability in the whole flight velocity envelope when it conducts a flight operation loading a cargo; (ii) in the process of airdrops, the increase in flight velocity will constantly decrease the helicopter pitching attitude and increases the total airdrop time and decreases the backward moving velocity of the cargo, and helicopter flying at a velocity between 80 and 120 knots might be acceptable; (iii) the stabilities of both the longitudinal and lateral periodic modes are continuing to decrease during the backward movement of the cargo. [ABSTRACT FROM AUTHOR]

A framework to model and analyze the coupled nonlinear aeroelasticity and flight dynamics of highly flexible aircrafts is presented. The methodology is based on the dynamics of 3D co-rotational beams. The coupling of axial, bending and torsional effects is added to the stiffness and mass matrices of Euler–Bernoulli beam to capture the most relevant characteristics of a real wing structure. The finite-state aerodynamic model is coupled with the structural model to simulate the unsteady aerodynamics. A scheme of mixed end-point and mid-point time-marching algorithms is proposed and applied into the implicit predictor–corrector integration, where the end-point algorithm is used in the predictor step for efficiency and mid-point algorithm in corrector step for accuracy. The ground, body and airflow axes for flight dynamics are re-defined by the global and elemental ones for structural dynamics, followed by the redefinitions of local Euler angles and airflow angles of each element. The framework can be used for quick analyses of flexible aircrafts in conceptual and preliminary design phases, including linear and nonlinear trim, aerodynamic load estimation, stability assessment, time-domain simulations and flight performance evaluations. The results show the payload mass and its distributions will significantly affect the trim state and longitudinal stability of highly flexible aircrafts. [ABSTRACT FROM AUTHOR]

The compound configuration is a good option for helicopters to break through speed limitation and improve maneuverability. However, the compound configuration applied on the small-scale helicopter has not been investigated in detail. In this study, an 11-state nonlinear dynamics model of a small-scale compound helicopter was established with the help of first physical principles and linear modification method. The ducted fan, free-rotate wing and horizontal stabilizer were considered in the compound configurations. To validate the accuracy of the model, high-quality flight data were obtained in hover and forward flights from 15 m/s to 32 m/s. Results show that the overall responses of the developed nonlinear model matched the hover data. In forward flight, it was proved that the nonlinear model has high accuracy in agreement with trim results and time-domain simulations. The wing model works well below 27 m/s. Furthermore, the effectiveness of the elevator and aileron in high speed was also verified in the simulation of a coordinated turn. [ABSTRACT FROM AUTHOR]

This work focuses on the wake encounter problem occurring when a light, or very light, aircraft flies through or nearby a wind turbine wake. The dependency of the aircraft normal load factor on the distance from the turbine rotor in various flight and environmental conditions is quantified. For this research, a framework of software applications has been developed for generating and controlling a population of flight simulation scenarios in presence of assigned wind and turbulence fields. The JSBSim flight dynamics model makes use of several autopilot systems for simulating a realistic pilot behavior during navigation. The wind distribution, calculated with OpenFOAM, is a separate input for the dynamic model and is considered frozen during each flight simulation. The aircraft normal load factor during wake encounters is monitored at different distances from the rotor, aircraft speeds, rates of descent and crossing angles. Based on these figures, some preliminary guidelines and recommendations on safe encounter distances are provided for general aviation aircraft, with considerations on pilot comfort and flight safety. These are needed, for instance, when an accident risk assessment study is required for flight in proximity of aeolic parks. A link to the GitHub code repository is provided. [ABSTRACT FROM AUTHOR]

Optimization methods are increasingly used to solve problems in aeronautical engineering. Typically, optimization methods are utilized in the design of an aircraft airframe or its structure. The presented study is focused on improvement of aircraft flight control procedures through numerical optimization. The optimization problems concern selected phases of flight of a light gyroplane--a rotorcraft using an unpowered rotor in autorotation to develop lift and an engine-powered propeller to provide thrust. An original methodology of computational simulation of rotorcraft flight was developed and implemented. In this approach the aircraft motion equations are solved step-by-step, simultaneously with the solution of the Unsteady Reynolds-Averaged Navier-Stokes equations, which is conducted to assess aerodynamic forces acting on the aircraft. As a numerical optimization method, the BFGS (Broyden-Fletcher-Goldfarb-Shanno) algorithm was adapted. The developed methodology was applied to optimize the flight control procedures in selected stages of gyroplane flight in direct proximity to the ground, where proper control of the aircraft is critical to ensure flight safety and performance. The results of conducted computational optimizations proved the qualitative correctness of the developed methodology. The research results can be helpful in the design of easy-to-control gyroplanes and also in the training of pilots for this type of rotorcraft. [ABSTRACT FROM AUTHOR]

In the area of synthetic sensors for flow angle estimation, the present work aims to describe the verification in a relevant environment of a physics-based approach using a dedicated technological demonstrator. The flow angle synthetic solution is based on a model-free, or physics-based, scheme and, therefore, it is applicable to any flying body. The demonstrator also encompasses physical sensors that provide all the necessary inputs to the synthetic sensors to estimate the angle-of-attack and the angle-of-sideslip. The uncertainty budgets of the physical sensors are evaluated to corrupt the flight simulator data with the aim of reproducing a realistic scenario to verify the synthetic sensors. The proposed approach for the flow angle estimation is suitable for modern and future aircraft, such as drones and urban mobility air vehicles. The results presented in this work show that the proposed approach can be effective in relevant scenarios even though some limitations can arise. [ABSTRACT FROM AUTHOR]

The paper presents the concept of controlling the designed optoelectronic scanning and tracking seeker. The above device is intended for the so-called passive guidance of short-range anti-aircraft missiles to various types of air maneuvering targets. In the presented control method, the modified linear-quadratic regulator (LQR) and the estimation of input signals using the extended Kalman filter (EKF) were used. The LQR regulation utilizes linearization of the mathematical model of the above-mentioned seeker by means of the so-called Jacobians. What is more, in order to improve the stability of the seeker control, vector selection of signals received by the optoelectronic system was used, which also utilized EKF. The results of the research are presented in a graphical form. Numerical simulations were carried out on the basis of the author's own program developed in the programming language C++. [ABSTRACT FROM AUTHOR]

This paper presents a controller design process for an aircraft tracking problem when not all states are available. In the study, a nonlinear-transport aircraft simulation model was used and identified through Maximum Likelihood Principle and Extended Kalman Filter. The obtained mathematical model was used to design a Linear–Quadratic Regulator (LQR) with optimal weighting matrices when not all states are measured. The nonlinear aircraft simulation model with LQR controller tracking abilities were analyzed for multiple experiments with various noise levels. It was shown that the designed controller is robust and allows for accurate trajectory tracking. It was found that, in ideal atmospheric conditions, the tracking errors are small, even for unmeasured variables. In wind presence, the tracking errors were proportional to the wind velocity and acceptable for small and moderate disturbances. When turbulence was present in the experiment, state variable oscillations occurred that were proportional to the turbulence intensity and acceptable for small and moderate disturbances. [ABSTRACT FROM AUTHOR]

In this research, we focus on the use of Unmanned Aerial Vehicles (UAVs) for the delivery of payloads and navigation towards safe-landing zones, specifically on the modeling of flight dynamics of lightweight vehicles denoted Precision Aerial Delivery Systems (PADSs). While a wide range of nonlinear models has been developed and tested on high-end applications considering various degrees of freedom (DOF), linear models suitable for low-cost applications have not been explored thoroughly. In this study, we propose and compare two linear models, a linearized version of a 6-DOF model specifically developed for micro-lightweight systems, and an alternative model based on a double integrator. Both linear models are implemented with a sensor fusion algorithm using a Kalman filter to estimate the position and attitude of PADSs, and their performance is compared to a nonlinear 6-DOF model. Simulation results demonstrate that both models, when incorporated into a Kalman filter estimation scheme, can determine the flight dynamics of PADSs during smooth flights. While it is validated that the double integrator model can adequately operate under the proposed estimation scheme for up to small acceleration changes, the linearized model proves to be capable of reproducing the nonlinear model characteristics even during moderately steep turns. [ABSTRACT FROM AUTHOR]

Unless a segregated airspace and the corresponding clearances can be afforded, flight testing of remotely piloted aircraft is often done near the ground and within visual line-of-sight. In addition to the increased exposure to turbulence, this setup also limits the available time for test manoeuvres on each pass, especially for subscale demonstrators with a relatively high wing loading and flight speed. A suitable testing procedure, efficient excitation signals and a robust system identification method are therefore fundamental. Here, the authors use ground-based flight control augmentation to inject multisine signals with low correlation between the different inputs. Focusing on initial flight-envelope expansion, where linear regression is common, this paper also describes the improvement of an existing frequency-domain method by using an instrumental variable (IV) approach to better handle turbulence and measurement noise and to enable real-time identification analysis. Both simulations and real flight tests on a subscale demonstrator are presented. The results show that the combination of multisine input signals and the enhanced frequency-domain method is an effective way of improving flight testing of remotely piloted aircraft in confined airspace. [ABSTRACT FROM AUTHOR]

This paper introduces a novel gimballed rotor mathematical model for real-time flight simulation of tilt-rotor aircraft and other vertical take-off and landing (VTOL) concepts, which improves the previous version of a multi-purpose rotor mathematical model developed by ZHAW and Politecnico di Torino as part of a comprehensive flight simulation model of a tilt-rotor aircraft currently implemented in the Research and Didactics Simulator of ZHAW and used for research activities such as handling qualities studies and flight control systems development. In the novel model, a new formulation of the flapping dynamics is indroduced to account for the gimballed rotor and better suit current tilt-rotor designs (XV-15, V-22, AW-609). This paper describes the mathematical model and provides a generic formulation as well as a specific one for 3-blades proprotors. The method expresses the gimbal attitude but also considers the variation of each blade's flapping due to the elasticity of the blades, so that the rotor coning angle can be represented. A validation of the mathematical model is performed against the available literature on the XV-15 Tilt-rotor aircraft and a comparison between the previous model is provided to show the improvements achieved. The results show a good correlation between the model and the reference data and the registered performance allow real-time flight simulation with pilot and hardware in the loop. [ABSTRACT FROM AUTHOR]

Designing a reconfiguration system for an aircraft requires a good mathematical model of the object. An accurate model describing the aircraft dynamics can be obtained from system identification. In this case, special maneuvers for parameter estimation must be designed, as the reconfiguration algorithm may require to use flight controls separately, even if they usually work in pairs. The simultaneous multi-axis multi-step input design for reconfigurable fixed-wing aircraft system identification is presented in this paper. D-optimality criterion and genetic algorithm were used to design the flight controls deflections. The aircraft model was excited with those inputs and its outputs were recorded. These data were used to estimate stability and control derivatives by using the maximum likelihood principle. Visual match between registered and identified outputs as well as relative standard deviations were used to validate the outcomes. The system was also excited with simultaneous multisine inputs and its stability and control derivatives were estimated with the same approach as earlier in order to assess the multi-step design. [ABSTRACT FROM AUTHOR]

Heterogeneity of the small aircraft category (e.g., small air transport (SAT), urban air mobility (UAM), unmanned aircraft system (UAS)), modern avionic solution (e.g., fly-by-wire (FBW)) and reduced aircraft (A/C) size require more compact, integrated, digital and modular air data system (ADS) able to measure data from the external environment. The MIDAS project, funded in the frame of the Clean Sky 2 program, aims to satisfy those recent requirements with an ADS certified for commercial applications. The main pillar lays on a smart fusion between COTS solutions and analytical sensors (patented technology) for the identification of the aerodynamic angles. The identification involves both flight dynamic relationships and data-driven state observer(s) based on neural techniques, which are deterministic once the training is completed. As this project will bring analytical sensors on board of civil aircraft as part of a redundant system for the very first time, design activities documented in this work have a particular focus on airworthiness certification aspects. At this maturity level, simulated data are used, real flight test data will be used in the next stages. Data collection is described both for the training and test aspects. Training maneuvers are defined aiming to excite all dynamic modes, whereas test maneuvers are collected aiming to validate results independently from the training set and all autopilot configurations. Results demonstrate that an alternate solution is possible enabling significant savings in terms of computational effort and lines of codes but they show, at the same time, that a better training strategy may be beneficial to cope with the new neural network architecture. [ABSTRACT FROM AUTHOR]

Wingtip folding is a means by which an aircraft's wingspan can be extended, allowing designers to take advantage of the associated reduction in induced drag. This type of device can provide other benefits if used in flight, such as flight control and load alleviation. In this paper, the authors present a method to develop reduced order flight dynamic models for in-flight wingtip folding, which are suitable for implementation in real-time pilot-in-the-loop simulations. Aspects such as the impact of wingtip size and folding angle on aircraft roll dynamics are investigated along with failure scenarios using a time domain aeroservoelastic framework and an established system identification method. The process discussed in this paper helps remove the need for direct connection of complex physics based models to engineering flight simulators and the need for tedious programming of large look-up-tables in simulators. Instead, it has been shown that a generic polynomial model for roll aeroderivatives can be used in small roll perturbation conditions to simulate the roll characteristics of an aerodynamic derivative based large transport aircraft equipped with varying fold hinge lines and tip deflections. Moreover, the effects of wing flexibility are also considered. [ABSTRACT FROM AUTHOR]

System identification from measured flight test data was conducted using the X-56A aeroelastic demonstrator to identify a longitudinal flight dynamics model that included the short period, first symmetric wing bending, and first symmetric wing torsion modes. Orthogonal phase-optimized multisines were used to simultaneously excite multiple control effectors while a flight control system was active. Non-dimensional stability and control derivatives parameterizing an aeroelastic model were estimated using the output-error approach to match Fourier transforms of measured output response data. The predictive capability of the identified model was demonstrated using other flight test data with different inputs and at a different flight conditions. Modal characteristics of the identified model were explored and compared with other predictions. Practical aspects of the experiment design and system identification analysis, specific to flexible aircraft, are also discussed. Overall, the approach used was successful for identifying aeroelastic flight dynamics models from flight test data. [ABSTRACT FROM AUTHOR]